arXiv subjects

M. A. Hossain

Publications and source records attributed to M. A. Hossain.

18 recordsLinked to original sources

arXiv2022

First-principles calculations to investigate structural, elastic, electronic, thermodynamic, and thermoelectric properties of CaPd$_3$B$_4$O$_{12}$ (B = Ti, V) perovskite

This study has explored numerous physical properties of CaPd$_3$Ti$_4$O$_{1}$2 (CPTO) and CaPd$_3$V$_4$O$_{12}$ (CPVO) quadruple perovskites employing the density functional theory (DFT) method. The mechanical permanence of these two compounds was observed by the Born stability criteria as well. The band structure of CPTO reveals a 0.88 and 0.46 eV direct narrow band gap while using GGA-mBJ and GGA-PBE potentials, respectively, which is an indication of its fascinating semiconducting nature. The calculated partial density of states indicates the strong hybridization between Pd-4d and O-2p orbital electrons for CPTO, whereas Pd-4d and V-3d-O-2p for CPVO. The study of the chemical bonding nature and electronic charge distribution graph reveals the coexistence of covalent O-V/Pd bonds, ionic O-Ti/Ca bonds, as well as metallic Ti/V-Ti/V bonding for both compounds. The Fermi surface of CPVO ensures a kind of hole as well as electron faces simultaneously, indicating the multifarious band characteristic. The prediction of the static real dielectric function (optical property) of CPTO at zero energy implies its promising dielectric nature. The photoconductivity and absorption coefficient of CPBO display good qualitative compliance with the consequences of band structure computations. The calculated thermodynamic properties manifest the thermodynamical stability for CPBO, whereas phonon dispersions of CPVO exhibit stable phonon dispersion in contrast to slightly unstable phonon dispersion of CPTO. The predicted Debye temperature ($θ_D$) has been utilized to correlate its topical features including thermoelectric behaviors. The studied thermoelectric transport properties of CPTO yielded the Seebeck coefficient (186 V/K), power factor (11.9 Wcm$^{-1}$K$^{-2}$), and figure of merit (ZT) value of about 0.8 at 800 K, indicating that this material could be a promising candidate for thermoelectric applications.

physics.app-ph↗

arXiv2020

Mechanical, optoelectronic and thermoelectric properties of half-Heusler p-type semiconductor BaAgP: A DFT investigation

We have explored the mechanical, electronic, optical and thermoelectric properties of p-type half-Heusler compound BaAgP for the first time using density functional theory based calculations. The mechanical and dynamical stability of this compound is confirmed by studying the Born stability criteria and phonon dispersion curve, respectively. It is soft, ductile and elastically anisotropic. The atomic bonding along a-axis is stronger than that along c-axis. The calculated electronic structure reveals that the studied compound is an indirect band gap semiconductor. The analysis of charge density distribution map and Mulliken population reveals that the bonding in BaAgP is a mixture of covalent and ionic. The optical features confirm that BaAgP is optically anisotropic. The high absorption coefficient and low reflectivity in the visible to ultraviolet region make this compound a possible candidate for solar cell and optoelectronic device applications. The thermoelectric properties have been evaluated by solving the Boltzmann semi-classical transport equations. The calculated power factor at 1000K along a-axis is 35.2 micro-W/cmK2 (with tau=10-14 s) which is ~3.5 times larger than that of SnSe, a promising layered thermoelectric materials. The thermoelectric figure of merit, ZT of BaAgP is 0.44 which is small due to high thermal conductivity. So the reduction of thermal conductivity is essential to enhance thermoelectric performance of BaAgP in device applications.

cond-mat.mtrl-sci↗

arXiv2020

Influence of Se doping in recently synthesized NaInS2-xSex solid solutions for potential thermo-mechanical applications studied via first-principles method

In the present work, the structural and hitherto unexplored thermal and mechanical properties of NaInS2-xSex (x = 0, 0.5, 1.0, 1.5 and 2.0) compounds have been studied using the density functional theory. Besides, the elastic anisotropy indices and hardnesses of NaInS2-xSex have been investigated as Se content is varied. The mechanical stability of all the compounds under study has been confirmed. The ratio of shear to bulk modulus (G/B) is low suggesting that the NaInS2-xSex (x = 0.5 and 1.5) compounds exhibit damage tolerant (ductility) properties while rest of the compositions are brittle in nature. The predicted hardness (H) values are also influenced with the Se content in the following order: H (NaInSSe) > H (NaInS2) > H (NaInSe2) > H (NaInS1.5Se0.5) > H (NaInS0.5Se1.5). All the anisotropic indices under study indicate that NaInS2-xSex compounds are anisotropic in nature. The Mulliken bond population analysis suggests that the degree of covalency of In-S/Se bonds decreases when S is substituted by Se. The origin of low Debye temperature (ΘD) and low minimum thermal conductivity (Kmin) have been successfully explained by considering the mean atomic weight (M/n) and average bond strength of the compounds. Temperature dependence of heat capacities (Cv, Cp) and linear thermal expansion coefficient (α ) are also estimated using the quasi-harmonic Debye model and discussed. The low values of Kmin, ΘD and α and damage tolerant behavior clearly indicate that the NaInS2-xSex (x = 0.5 and 1.5) compounds can be used as promising thermal barrier coating materials for high temperature applications.

cond-mat.mtrl-sci↗

arXiv2020

NaInX2 (X = S, Se) layered materials for energy harvesting applications: First-principles insights into optoelectronic and thermoelectric properties

In the present study, the structural, electronic, optical and thermoelectric properties of two isostructural chalcogenide materials, NaInS2 and NaInSe2 with hexagonal symmetry (R-3m) have been studied using the first principles method. A very good agreement has been found between our results with the available experimental and theoretical ones. The studied materials are semiconducting in nature as confirmed from the electronic band structure and optical properties.The strong hybridizations among s orbitals of Na, In and Se atoms push the bottom of the conduction band downward resulting in a narrower band gap of NaInSe2 compared to that of NaInS2 compound. Different optical (dielectric function, photoconductivity, absorption coefficient, reflectivity, refractive index and loss function) and thermoelectric (Seebeck coefficient, electrical conductivity, power factor and thermal conductivity) properties of NaInX2 (X = S, Se) have been studied in detail for the first time. It is found that all these properties are significantly anisotropic due to the strongly layered structure of NaInX2 (X = S, Se). Strong optical absorption with sharp peaks is found in the far visible to mid ultraviolet (UV) regions while the reflectivity is low in the UV region for both the compounds. Such features indicate feasibility of applications in optoelectronic sector.The calculated thermoelectric power factors at 1000 K for NaInS2 and NaInSe2 along a-axis are found to be 151.5 micro Watt /cmK2 and 154 micro Watt/cmK2, respectively and the corresponding ZT values are ~0.70. The obtained thermal conductivity along a-axis for both compounds is high (~22 W/mK).This suggests that the reduction of such high thermal conductivity is important to achieve higher ZT values of the NaInX2(X = S, Se) compounds.

cond-mat.mtrl-sci↗

arXiv2020

Physical properties of new MAX phase borides M2SB (M = Zr, Hf and Nb) in comparison with conventional MAX phase carbides M2SC (M = Zr, Hf and Nb): Comprehensive insights

In this article, a detailed study of the recently synthesized MAX phase borides M2SB (M = Zr, Hf and Nb) has been performed via first principles technique. Investigation of mechanical hardness, elastic anisotropy, optical properties, dynamical stability and thermal properties are considered for the first time. The estimated values of stiffness constants and elastic moduli are found in good agreement with available results. The micro and macro hardness (Hmicro and Hmacro) parameters are calculated. The Vickers hardness is also calculated using Mulliken population analysis. The electronic density of states and charge density mapping are used to explain the variation of stiffness constants, elastic moduli and hardness parameters among the studied ternary borides. The Nb2SB compound is found to show best combination of mechanical properties. Mixture of covalent and ionic bonding within these borides is explained using Mulliken population analysis. The direction dependent values of Youngs modulus, compressibility, shear modulus and Poissons ratio are visualized by 2D and 3D representations and different anisotropic factors are calculated. The important optical constants are calculated and analyzed. The metallic nature of the studied borides is confirmed from the DOS and optical properties. The reflectivity spectra reveal the potential use of Zr2SB as coating materials to diminish solar heating. The studied borides are dynamically stable as confirmed from the phonon dispersion curves. The characteristic thermodynamic properties have also been calculated and analyzed. The physical properties of corresponding 211 MAX phase carbides are also calculated for comparison with those of the titled ternary borides.

cond-mat.mtrl-sci↗

arXiv2018

Elastic, electronic, optical and thermoelectric properties of K2Cu2GeS4: a new chalcogenide material

We report the first principles study of structural, elastic, electronic, optical and thermoelectric properties of newly synthesized K2Cu2GeS4. The structural parameters are found to be in good agreement with experimental results. The single crystal elastic constants (Cij) are calculated and K2Cu2GeS4 is found to be mechanical stable. The analysis of polycrystalline elastic constants reveals that the compound is expected to be soft in nature. The values of Pugh and Poisson ratios suggested that the compound lies in the border line of ductile/brittle behavior. The chemical bonding is primarily ionic, the inter-atomic forces are central in nature and the compound is mechanically anisotropic. The computed electronic band profile shows semiconducting characteristics and the estimated band gap is strongly dependent on the functional used representing the exchange correlations. The nature of chemical bonding is explained using electronic charge density mapping. Important optical constants such as dielectric constants, refractive index, absorption coefficient, photoconductivity, reflectivity and loss function are calculated and discussed in detail. Optical conductivity is found to be in good qualitative agreement with the results of band structure calculations. The Seebeck coefficients are positive for the entire temperature range used in this study, suggesting the presence of p-type charge carriers. We have obtained large Seebeck coefficent, 681 V/K at 100 K and 286 V/K at 300 K. At room temperature, the electrical conductivity and electronic thermal conductivity are 1.8 31018 ms)-1 and 0.5 1014 W/mK.s, respectively. The dimensionless figure of merit of K2Cu2GeS4 is evaluated as ~1.0 at 300 K. This suggests that K2Cu2GeS4 is a potential candidate for thermoelectric applications.

cond-mat.mtrl-sci↗

arXiv2017

Recently synthesized (Zr1-xTix)2AlC (0 - x - 1) solid solutions: Theoretical study of the effects of M mixing on physical properties

The effects of M atomic species mixing on the physical properties of newly synthesized MAX phase (Zr1-xTix)2AlC solid solutions have been studied by means of density functional theory (DFT) calculations. The lattice constants in good accord with the experimental results, are found to decrease with Ti content. The elastic constants, Cij, and the other polycrystalline elastic moduli have been calculated. The elastic constants satisfy the mechanical stability conditions of these solid solutions. The constants C11, C33 and C44 are found to increase with Ti contents up to x = 0.67, thereafter these decrease slightly. A reverse trend is followed by C12 and C13. The elastic moduli are also found to increase up to x = 0.67, beyond which these moduli go down slightly. Pughs ratio and Poissons ratio both confirm the brittleness of (Zr1-xTix)2AlC. Different anisotropy factors revealed the anisotropic character of these solid solutions. A non-vanishing value of the electronic energy density of states (EDOS) at the Fermi level suggests that (Zr1-xTix)2AlC are metallic in nature. A mixture of covalent, ionic and metallic bonding has been indicated from the electronic structure with dominant covalent bonding due to hybridization of Zr-4d states and C-2p states. The variation of elastic stiffness and elastic parameters with x is seen to be correlated with partial DOS (PDOS) and charge density distribution. The calculated Debye temperature and minimum thermal conductivity are found to increase with Ti contents, while melting temperature is the highest for x = 0.67. The solid solution with x = 0.67 shows improved mechanical and thermal properties compared to that of the two end members Zr2AlC and Ti2AlC. The study of charge transport properties of (Zr1-xTix)2AlC reveals the metallic nature with saturated resistivity. The maximum power factor is obtained at 400 K for (Zr1-xTix)2AlC.

cond-mat.mtrl-sci↗

arXiv2014

Effects of Hard Real-Time Constraints in Implementing the Myopic Scheduling Algorithm

Myopic is a hard real-time process scheduling algorithm that selects a suitable process based on a heuristic function from a subset (Window)of all ready processes instead of choosing from all available processes, like original heuristic scheduling algorithm. Performance of the algorithm significantly depends on the chosen heuristic function that assigns weight to different parameters like deadline, earliest starting time, processing time etc. and the sizeof the Window since it considers only k processes from n processes (where, k<= n). This research evaluates the performance of the Myopic algorithm for different parameters to demonstrate the merits and constraints of the algorithm. A comparative performance of the impact of window size in implementing the Myopic algorithm is presented and discussed through a set of experiments.

cs.OS↗

arXiv2014

Coupled skyrmion sublattices in Cu2OSeO3

We report the observation of the skyrmion lattice in the chiral multiferroic insulator Cu2OSeO3 using Cu L3-edge resonant soft x-ray diffraction. We observe the unexpected existence of two distinct skyrmion sublattices that arise from inequivalent Cu sites with chemically identical coordination numbers but different magnetically active orbitals. The skyrmion sublattices are rotated with respect to each other implying a long wavelength modulation of the lattice. The modulation vector could be controlled with an applied magnetic field, associating this Moire-like phase with a continuous phase transition. Our findings will open a new class of science involving manipulation of quantum topological states.

cond-mat.str-el↗

arXiv2013

Electronic superlattice revealed by resonant scattering from random impurities in Sr3Ru2O7

Resonant elastic x-ray scattering (REXS) is an exquisite element-sensitive tool for the study of subtle charge, orbital, and spin superlattice orders driven by the valence electrons, which therefore escape detection in conventional x-ray diffraction (XRD). Although the power of REXS has been demonstrated by numerous studies of complex oxides performed in the soft x-ray regime, the cross section and photon wavelength of the material-specific elemental absorption edges ultimately set the limit to the smallest superlattice amplitude and periodicity one can probe. Here we show -- with simulations and REXS on Mn-substituted Sr$_3$Ru$_2$O$_7$ -- that these limitations can be overcome by performing resonant scattering experiments at the absorption edge of a suitably-chosen, dilute impurity. This establishes that -- in analogy with impurity-based methods used in electron-spin-resonance, nuclear-magnetic resonance, and Mössbauer spectroscopy -- randomly distributed impurities can serve as a non-invasive, but now momentum-dependent probe, greatly extending the applicability of resonant x-ray scattering techniques.

cond-mat.str-el↗

arXiv2012

Synthesized inverse-perovskites Sc3InX (X = B, C, N): A theoretical investigation

We present first-principles density functional theory (DFT) investigations of mechanical, thermodynamic and optical properties of synthesized inverse-perovskites Sc3InX (X = B, C, N). The elastic constants at zero pressure and temperature are calculated and the anisotropic behavior of the compounds is illustrated. All the three materials are shown to be brittle in nature. The computed Peierls stress, approximately 3 to 5 times larger than of a selection of MAX phases, show that dislocation movement may follow but with much reduced occurrences compared to these MAX phases. The Mulliken bonding population and charge density maps show stronger covalency between Sc and X atoms compared with Sc-Sc bond. The Vickers hardness values of Sc3InX are predicted to be between 3.03 and 3.88 GPa. The Fermi surfaces of Sc3InX contain both hole- and electron-like topology which changes as one replaces B with C or N. The bulk modulus, specific heats, thermal expansion coefficient, and Debye temperature are calculated as a function both temperature and pressure using the quasi-harmonic Debye model with phononic effects. The results so obtained are analysed in comparison to the characteristics of other related compounds. Moreover optical functions are calculated and discussed for the first time. The reflectivity is found to be high in the IR-UV regions up to ~ 10.7 eV (Sc3InB, Sc3InC) and 12.3 eV (Sc3InN), thus showing promise as good coating materials. Keywords: Sc3InX, Mechanical properties; Fermi surface; Quasi-harmonic Debye model; Thermodynamic properties; Optical properties

cond-mat.mtrl-sci↗

arXiv2012

Mechanical, thermal and optical properties of perovskite borides RRh3B(R = Y, Zr, and Nb)

We report here ab initio density functional theory (DFT) calculations of structural, elastic, Peierls stress, thermodynamic and optical properties of RRh3B (R = Y, Zr and Nb) using the plane wave psedudopotential method. The materials possess better ductile behavior in comparison with a selection of layered MAX phases but the anisotropy is strong, particularly in NbRh3B. The Peierls stress, approximately 3-4 times larger than in MAX phases, show that dislocation movement may follow but with much reduced occurrences compared to MAX phases. The temperature and pressure dependence of bulk modulus, specific heats, thermal expansion coefficient, and Debye temperature are calculated for the first time for two of the three compounds using the quasi-harmonic Debye model with phononic effects for elevated temperature and pressure. The obtained results are discussed in comparison to the behavior of other related compounds. Further the features of optical functions obtained for the first time are discussed. The study reveals that the reflectivity is high in the IR-UV regions up to ~ 17.5 eV (YRh3B, ZrRh3B) and 20 eV (NbRh3B), thus showing promise as good coating materials. Keywords: RRh3B; Quasi-harmonic Debye model; Thermodynamic properties; Optical properties

cond-mat.mtrl-sci↗

arXiv2012

Mott versus Slater-type metal-insulator transition in Mn-substituted Sr3Ru2O7

We present a temperature-dependent x-ray absorption (XAS) and resonant elastic x-ray scattering (REXS) study of the metal-insulator transition (MIT) in Sr3(Ru1-xMnx)2O7. The XAS results reveal that the MIT drives the onset of local antiferromagnetic correlations around the Mn impurities, a precursor of the long-range antiferromagnetism detected by REXS at T_order<T_MIT. This establishes that the MIT is of the Mott-type (electronic correlations) as opposed to Slater-type (magnetic order). While this behavior is induced by Mn impurities, the (1/4,1/4,0) order exists for a wide range of Mn concentrations, and points to an inherent instability of the parent compound.

cond-mat.str-el↗

arXiv2012

Newly synthesized Ti5Al2C3: Electronic and optical properties by first-principles method

A theoretical study of the newly identified Ti5Al2C3 belonging to the MAX phases has been performed by using the first-principles pseudopotential plane-wave method within the generalized gradient approximation (GGA). The energy band structure and optical properties are reported for the first time. It is seen that Ti 3d electrons mainly contribute to the DOS at the Fermi level, and should be involved in the conduction properties. The parameters of optical properties (dielectric function, absorption spectrum, conductivity, energy-loss spectrum and reflectivity) for Ti5Al2C3 are calculated and discussed. The material has a large positive static dielectric constant of 130 which indicates it to be a good dielectric material. Further the reflectivity of Ti5Al2C3 is high in the infrared-visible-UV region up to ~ 9.7 eV showing promise as a good coating material to avoid solar heating. Keywords: A: Ti5Al2C3; B: First-principles; C: Electronic structure; C: Optical properties

cond-mat.mtrl-sci↗

arXiv2009

Magnetic Superstructure and Metal-Insulator Transition in Mn-Substituted Sr3Ru2O7

We present a temperature-dependent resonant elastic soft x-ray scattering (REXS) study of the metal-insulator transition in Sr3(Ru1-xMnx)2O7, performed at both Ru and Mn L-edges. Resonant magnetic superstructure reflections, which indicate an incipient instability of the parent compound, are detected below the transition. Based on modelling of the REXS intensity from randomly distributed Mn impurities, we establish the inhomogeneous nature of the metal-insulator transition, with an effective percolation threshold corresponding to an anomalously low x<0.05 Mn substitution.

cond-mat.str-el↗

arXiv2008

Crystal-field level inversion in lightly Mn-doped Sr3Ru2O7

Sr3(Ru1-xMnx)2O7, in which 4d-Ru is substituted by the more localized 3d-Mn, is studied by x-ray dichroism and spin-resolved density functional theory. We find that Mn impurities do not exhibit the same 4+ valence of Ru, but act as 3+ acceptors; the extra eg electron occupies the in-plane 3dx2-y2 orbital instead of the expected out-of-plane 3d3z2-r2. We propose that the 3d-4d interplay, via the ligand oxygen orbitals, is responsible for this crystal-field level inversion and the material's transition to an antiferromagnetic, possibly orbitally-ordered, low-temperature state.

cond-mat.str-el↗

arXiv2008

Two Gaps Make a High Temperature Superconductor?

One of the keys to the high-temperature superconductivity puzzle is the identification of the energy scales associated with the emergence of a coherent condensate of superconducting electron pairs. These might provide a measure of the pairing strength and of the coherence of the superfluid, and ultimately reveal the nature of the elusive pairing mechanism in the superconducting cuprates. To this end, a great deal of effort has been devoted to investigating the connection between the superconducting transition temperature Tc and the normal-state pseudogap crossover temperature T*. Here we present a review of a large body of experimental data that suggests a coexisting two-gap scenario, i.e. superconducting gap and pseudogap, over the whole superconducting dome.

cond-mat.supr-con↗

arXiv2008

Controlling the self-doping of YBa2C3O7-d polar surfaces: From Fermi surface to nodal Fermi arcs by ARPES

The discovery of quantum oscillations in the normal-state electrical resistivity of YBa2Cu3O6.5 provides the first evidence for the existence of Fermi surface (FS) pockets in an underdoped cuprate. However, the pockets' electron vs. hole character, and the very interpretation in terms of closed FS contours, are the subject of considerable debate. Angle-resolved photoemission spectroscopy (ARPES), with its ability to probe electronic dispersion as well as the FS, is ideally suited to address this issue. Unfortunately, the ARPES study of YBa2C3O7-d (YBCO) has been hampered by the technique's surface sensitivity. Here we show that this stems from the polarity and corresponding self-doping of the YBCO surface. By in-situ deposition of potassium atoms on the cleaved surface, we are able to continuously tune the doping of a single sample from the heavily overdoped to the underdoped regime. This reveals the progressive collapse of the normal-metal-like FS into four disconnected nodal FS arcs, or perhaps into hole but not electron pockets, in underdoped YBCO6.5.

cond-mat.supr-con↗