Searcharxiv⌕ Search

arXiv subjects

M. A. Thomson

Publications and source records attributed to M. A. Thomson.

At least 37 records · Page 2Linked to original sources
arXiv2013

The Pandora Particle Flow Algorithm

A high-energy e+e- collider, such as the ILC or CLIC, is arguably the best option to complement and extend the LHC physics programme. A lepton collider will allow for exploration of Standard Model Physics, such as precise measurements of the Higgs, top and gauge sectors, in addition to enabling a multitude of New Physics searches. However, physics analyses at such a collider will place unprecedented demands on calorimetry, with a required jet energy resolution of σ(E)/E < 3.5%. To meet these requirements will need a new approach to calorimetry. The particle flow approach to calorimetry requires both fine granularity detectors and sophisticated software algorithms. It promises to deliver unparalleled jet energy resolution by fully reconstructing the paths of individual particles through the detector. The energies of charged particles can then be extracted from precise inner detector tracker measurements, whilst photon energies will be measured in the ECAL, and only neutral hadron energies (10% of jet energies) will be measured in the HCAL, largely avoiding the typically poor HCAL resolution. This document introduces the Pandora particle flow algorithms, which offer the current state of the art in particle flow calorimetry for the ILC and CLIC. The performance of the algorithms is investigated by examining the reconstructed jet energy resolution and the ability to separate the hadronic decays of W and Z bosons.

physics.ins-det↗
arXiv2013

Track segments in hadronic showers in a highly granular scintillator-steel hadron calorimeter

We investigate the three dimensional substructure of hadronic showers in the CALICE scintillator-steel hadronic calorimeter. The high granularity of the detector is used to find track segments of minimum ionising particles within hadronic showers, providing sensitivity to the spatial structure and the details of secondary particle production in hadronic cascades. The multiplicity, length and angular distribution of identified track segments are compared to GEANT4 simulations with several different shower models. Track segments also provide the possibility for in-situ calibration of highly granular calorimeters.

physics.ins-det↗
arXiv2013

Measurement of Neutrino and Antineutrino Oscillations Using Beam and Atmospheric Data in MINOS

We report measurements of oscillation parameters from $ν_{mu}$ and $\barν_μ$ disappearance using beam and atmospheric data from MINOS. The data comprise exposures of \unit[$10.71 \times 10^{20}$]{protons on target (POT)} in the $ν_μ$-dominated beam, $\unit[3.36\times10^{20}]{POT}}$ in the $\barν_μ$-enhanced beam, and 37.88 kton-years of atmospheric neutrinos. Assuming identical $ν$ and $\barν$ oscillation parameters, we measure \mbox{$|Δm^2}| = \unit[2.41^{+0.09}_{-0.10}) \times 10^{-3}]{eV^{2}}$} and $\sin^{2}/!/left(2θ\right) = 0.950^{+0.035}_{-0.036}$. Allowing independent $ν$ and $\barν$ oscillations, we measure antineutrino parameters of $|Δ\bar{m}^2| = \unit[(2.50 ^{+0.23}_{-0.25}) \times 10^{-3}]{eV^{2}}$ and $\sin^{2}/!/left(2\barθ \right) = 0.97^{+0.03}_{-0.08}$, with minimal change to the neutrino parameters.

hep-ex↗
arXiv2013

Electron neutrino and antineutrino appearance in the full MINOS data sample

We report on $ν_e$ and $\barν_e$ appearance in $ν_μ$ and $\barν_μ$ beams using the full MINOS data sample. The comparison of these $ν_e$ and $\barν_e$ appearance data at a 735 km baseline with $θ_{13}$ measurements by reactor experiments probes $δ$, the $θ_{23}$ octant degeneracy, and the mass hierarchy. This analysis is the first use of this technique and includes the first accelerator long-baseline search for $\barν_μ\rightarrow\barν_e$. Our data disfavor 31% (5%) of the three-parameter space defined by $δ$, the octant of the $θ_{23}$, and the mass hierarchy at the 68% (90%) C.L. We measure a value of 2sin$^2(2θ_{13})$sin$^2(θ_{23})$ that is consistent with reactor experiments.

hep-ex↗
arXiv2013

A search for flavor-changing non-standard neutrino interactions by MINOS

We report new constraints on flavor-changing non-standard neutrino interactions (NSI) using data from the MINOS experiment. We analyzed a combined set of beam neutrino and antineutrino data, and found no evidence for deviations from standard neutrino mixing. The observed energy spectra constrain the NSI parameter to the range $-0.20 < \varepsilon_{μτ} < 0.07\;\text{(90% C.L.)}$

hep-ex↗
arXiv2012

Hadronic energy resolution of a highly granular scintillator-steel hadron calorimeter using software compensation techniques

The energy resolution of a highly granular 1 m3 analogue scintillator-steel hadronic calorimeter is studied using charged pions with energies from 10 GeV to 80 GeV at the CERN SPS. The energy resolution for single hadrons is determined to be approximately 58%/sqrt(E/GeV}. This resolution is improved to approximately 45%/sqrt(E/GeV) with software compensation techniques. These techniques take advantage of the event-by-event information about the substructure of hadronic showers which is provided by the imaging capabilities of the calorimeter. The energy reconstruction is improved either with corrections based on the local energy density or by applying a single correction factor to the event energy sum derived from a global measure of the shower energy density. The application of the compensation algorithms to Geant4 simulations yield resolution improvements comparable to those observed for real data.

physics.ins-det↗
arXiv2012

Performance of Particle Flow Calorimetry at CLIC

The particle flow approach to calorimetry can provide unprecedented jet energy resolution at a future high energy collider, such as the International Linear Collider (ILC). However, the use of particle flow calorimetry at the proposed multi-TeV Compact Linear Collider (CLIC) poses a number of significant new challenges. At higher jet energies, detector occupancies increase, and it becomes increasingly difficult to resolve energy deposits from individual particles. The experimental conditions at CLIC are also significantly more challenging than those at previous electron-positron colliders, with increased levels of beam-induced backgrounds combined with a bunch spacing of only 0.5 ns. This paper describes the modifications made to the PandoraPFA particle flow algorithm to improve the jet energy reconstruction for jet energies above 250 GeV. It then introduces a combination of timing and p_T cuts that can be applied to reconstructed particles in order to significantly reduce the background. A systematic study is performed to understand the dependence of the jet energy resolution on the jet energy and angle, and the physics performance is assessed via a study of the energy and mass resolution of W and Z particles in the presence of background at CLIC. Finally, the missing transverse momentum resolution is presented, and the fake missing momentum is quantified. The results presented in this paper demonstrate that high granularity particle flow calorimetry leads to a robust and high resolution reconstruction of jet energies and di-jet masses at CLIC.

physics.ins-det↗
arXiv2012

Measurements of atmospheric neutrinos and antineutrinos in the MINOS Far Detector

This paper reports measurements of atmospheric neutrino and antineutrino interactions in the MINOS Far Detector, based on 2553 live-days (37.9 kton-years) of data. A total of 2072 candidate events are observed. These are separated into 905 contained-vertex muons and 466 neutrino-induced rock-muons, both produced by charged-current $ν_μ$ and $\barν_μ$ interactions, and 701 contained-vertex showers, composed mainly of charged-current $ν_{e}$ and $\barν_{e}$ interactions and neutral-current interactions. The curvature of muon tracks in the magnetic field of the MINOS Far Detector is used to select separate samples of $ν_μ$ and $\barν_μ$ events. The observed ratio of $\barν_μ$ to $ν_μ$ events is compared with the Monte Carlo simulation, giving a double ratio of $R^{data}_{\barν/ν}/R^{MC}_{\barν/ν} = 1.03 \pm 0.08 (stat.) \pm 0.08 (syst.)$. The $ν_μ$ and $\barν_μ$ data are separated into bins of $L/E$ resolution, based on the reconstructed energy and direction of each event, and a maximum likelihood fit to the observed $L/E$ distributions is used to determine the atmospheric neutrino oscillation parameters. This fit returns 90% confidence limits of $|Δm^{2}| = (1.9 \pm 0.4) \times 10^{-3} eV^{2}$ and $sin^{2} 2θ> 0.86$. The fit is extended to incorporate separate $ν_μ$ and $\barν_μ$ oscillation parameters, returning 90% confidence limits of $|Δm^{2}|-|Δ\bar{m}^{2}| = 0.6^{+2.4}_{-0.8} \times 10^{-3} eV^{2}$ on the difference between the squared-mass splittings for neutrinos and antineutrinos.

hep-ex↗
arXiv2012

An improved measurement of muon antineutrino disappearance in MINOS

We report an improved measurement of muon anti-neutrino disappearance over a distance of 735km using the MINOS detectors and the Fermilab Main Injector neutrino beam in a muon anti-neutrino enhanced configuration. From a total exposure of 2.95e20 protons on target, of which 42% have not been previously analyzed, we make the most precise measurement of the anti-neutrino "atmospheric" delta-m squared = 2.62 +0.31/-0.28 (stat.) +/- 0.09 (syst.) and constrain the anti-neutrino atmospheric mixing angle >0.75 (90%CL). These values are in agreement with those measured for muon neutrinos, removing the tension reported previously.

hep-ex↗
arXiv2012

Search for Lorentz invariance and CPT violation with muon antineutrinos in the MINOS Near Detector

We have searched for sidereal variations in the rate of antineutrino interactions in the MINOS Near Detector. Using antineutrinos produced by the NuMI beam, we find no statistically significant sidereal modulation in the rate. When this result is placed in the context of the Standard Model Extension theory we are able to place upper limits on the coefficients defining the theory. These limits are used in combination with the results from an earlier analysis of MINOS neutrino data to further constrain the coefficients.

hep-ex↗
arXiv2011

Electromagnetic response of a highly granular hadronic calorimeter

The CALICE collaboration is studying the design of high performance electromagnetic and hadronic calorimeters for future International Linear Collider detectors. For the hadronic calorimeter, one option is a highly granular sampling calorimeter with steel as absorber and scintillator layers as active material. High granularity is obtained by segmenting the scintillator into small tiles individually read out via silicon photo-multipliers (SiPM). A prototype has been built, consisting of thirty-eight sensitive layers, segmented into about eight thousand channels. In 2007 the prototype was exposed to positrons and hadrons using the CERN SPS beam, covering a wide range of beam energies and incidence angles. The challenge of cell equalization and calibration of such a large number of channels is best validated using electromagnetic processes. The response of the prototype steel-scintillator calorimeter, including linearity and uniformity, to electrons is investigated and described.

physics.ins-det↗
arXiv2010

Study of the interactions of pions in the CALICE silicon-tungsten calorimeter prototype

A prototype silicon-tungsten electromagnetic calorimeter for an ILC detector was tested in 2007 at the CERN SPS test beam. Data were collected with electron and hadron beams in the energy range 8 to 80 GeV. The analysis described here focuses on the interactions of pions in the calorimeter. One of the main objectives of the CALICE program is to validate the Monte Carlo tools available for the design of a full-sized detector. The interactions of pions in the Si-W calorimeter are therefore confronted with the predictions of various physical models implemented in the GEANT4 simulation framework.

physics.ins-det↗
arXiv2010

Construction and Commissioning of the CALICE Analog Hadron Calorimeter Prototype

An analog hadron calorimeter (AHCAL) prototype of 5.3 nuclear interaction lengths thickness has been constructed by members of the CALICE Collaboration. The AHCAL prototype consists of a 38-layer sandwich structure of steel plates and highly-segmented scintillator tiles that are read out by wavelength-shifting fibers coupled to SiPMs. The signal is amplified and shaped with a custom-designed ASIC. A calibration/monitoring system based on LED light was developed to monitor the SiPM gain and to measure the full SiPM response curve in order to correct for non-linearity. Ultimately, the physics goals are the study of hadron shower shapes and testing the concept of particle flow. The technical goal consists of measuring the performance and reliability of 7608 SiPMs. The AHCAL was commissioned in test beams at DESY and CERN. The entire prototype was completed in 2007 and recorded hadron showers, electron showers and muons at different energies and incident angles in test beams at CERN and Fermilab.

physics.ins-det↗
arXiv2009

Particle Flow Calorimetry and the PandoraPFA Algorithm

The Particle Flow (PFlow) approach to calorimetry promises to deliver unprecedented jet energy resolution for experiments at future high energy colliders such as the proposed International Linear Collider (ILC). This paper describes the PandoraPFA particle flow algorithm which is then used to perform the first systematic study of the potential of high granularity PFlow calorimetry. For simulated events in the ILD detector concept, a jet energy resolution of sigma_E/E < 3.8 % is achieved for 40-400 GeV jets. This result, which demonstrates that high granularity PFlow calorimetry can meet the challenging ILC jet energy resolution goals, does not depend strongly on the details of the Monte Carlo modelling of hadronic showers. The PandoraPFA algorithm is also used to investigate the general features of a collider detector optimised for high granularity PFlow calorimetry. Finally, a first study of the potential of high granularity PFlow calorimetry at a multi-TeV lepton collider, such as CLIC, is presented.

physics.ins-det↗
arXiv2008

Design and Electronics Commissioning of the Physics Prototype of a Si-W Electromagnetic Calorimeter for the International Linear Collider

The CALICE collaboration is studying the design of high performance electromagnetic and hadronic calorimeters for future International Linear Collider detectors. For the electromagnetic calorimeter, the current baseline choice is a high granularity sampling calorimeter with tungsten as absorber and silicon detectors as sensitive material. A ``physics prototype'' has been constructed, consisting of thirty sensitive layers. Each layer has an active area of 18x18 cm2 and a pad size of 1x1 cm2. The absorber thickness totals 24 radiation lengths. It has been exposed in 2006 and 2007 to electron and hadron beams at the DESY and CERN beam test facilities, using a wide range of beam energies and incidence angles. In this paper, the prototype and the data acquisition chain are described and a summary of the data taken in the 2006 beam tests is presented. The methods used to subtract the pedestals and calibrate the detector are detailed. The signal-over-noise ratio has been measured at 7.63 +/- 0.01. Some electronics features have been observed; these lead to coherent noise and crosstalk between pads, and also crosstalk between sensitive and passive areas. The performance achieved in terms of uniformity and stability is presented.

physics.ins-det↗
arXiv2007

Progress with Particle Flow Calorimetry

One of the most important requirements for a detector at the ILC is good jet energy resolution. It is widely believed that the particle flow approach to calorimetry is the key to achieving the ILC goal of a di-jet invariant mass resolution sigma_m/m < Gamma_Z/m_Z. This paper describes the current performance of the PandoraPFA particle flow algorithm. For simulated light quark jets in the Tesla TDR detector, the jet energy resolution achieved is better than sigma_E/E ~ 3.4% for jet energies in the range 45-250 GeV. This represents the first demonstration that Particle Flow Calorimetry can reach the ILC jet energy resolution goals.

physics.ins-det↗
arXiv2006

Particle Flow Calorimetry at the ILC

One of the most important requirements for a detector at the ILC is good jet energy resolution. It is widely believed that the particle flow approach to calorimetry is the key to achieving the goal of 0.3/sqrt(E[GeV]). This paper describes the current performance of the PandoraPFA particle flow algorithm. For 45 GeV jets in the Tesla TDR detector concept, the ILC jet energy resolution goal is reached. At higher energies the jet energy resolution becomes worse and can be described by the empirical expression: sigma_E/E ~ 0.265/sqrt(E[GeV]) + 1.2x10^{-4}E[GeV].

physics.ins-det↗