arXiv subjects

M. Aspelmeyer

Publications and source records attributed to M. Aspelmeyer.

At least 19 recordsLinked to original sources

arXiv2025

Optical Interferometric Readout of a Magnetically Levitated Superconducting Microsphere

We probe the motion of a 6 $\mu g$ magnetically levitated superconducting microsphere using optical interferometry at 3 K, achieving a resolution better than 1 $nm/ \sqrt{Hz}$, and use the measured signal to feedback-cool its motion. The resolution exceeds the shot-noise limit of 11 $pm/ \sqrt{Hz}$ primarily due to technical noise arising from the roughness of the particle. Combined with established techniques of cavity optomechanics, the high degree of isolation from environmental noise afforded by this platform provides a path to quantum physics experiments with cryogenic isolated masses at the microgram scale.

quant-ph↗

arXiv2022

Levitodynamics: Levitation and control of microscopic objects in vacuum

The control of levitated nano- and micro-objects in vacuum is of considerable interest, capitalizing on the scientific achievements in the fields of atomic physics, control theory and optomechanics. The ability to couple the motion of levitated systems to internal degrees of freedom, as well as to external forces and systems, provides opportunities for science and technology. Attractive research directions, ranging from fundamental quantum physics to commercial sensors, have been unlocked by the many recent experimental achievements, including motional ground-state cooling of an optically levitated nanoparticle. We review the status, challenges and prospects of levitodynamics, the mutidisciplinary research devoted to understanding, controlling, and using levitated nano- and micro-objects in vacuum.

quant-ph↗

arXiv2021

Large Quantum Delocalization of a Levitated Nanoparticle using Optimal Control: Applications for Force Sensing and Entangling via Weak Forces

We propose to optimally control the harmonic potential of a levitated nanoparticle to quantum delocalize its center-of-mass motional state to a length scale orders of magnitude larger than the quantum zero-point motion. Using a bang-bang control of the harmonic potential, including the possibility to invert it, the initial ground-state-cooled levitated nanoparticle coherently expands to large scales and then contracts to the initial state in a time-optimal way. We show that this fast loop protocol can be used to enhance force sensing as well as to dramatically boost the entangling rate of two weakly interacting nanoparticles. We parameterize the performance of the protocol, and therefore the macroscopic quantum regime that could be explored, as a function of displacement and frequency noise in the nanoparticle's center-of-mass motion. This noise analysis accounts for the sources of decoherence relevant to current experiments.

quant-ph↗

arXiv2020

Stationary optomechanical entanglement between a mechanical oscillator and its measurement apparatus

We provide an argument to infer stationary entanglement between light and a mechanical oscillator based on continuous measurement of light only. We propose an experimentally realizable scheme involving an optomechanical cavity driven by a resonant, continuous-wave field operating in the non-sideband-resolved regime. This corresponds to the conventional configuration of an optomechanical position or force sensor. We show analytically that entanglement between the mechanical oscillator and the output field of the optomechanical cavity can be inferred from the measurement of squeezing in (generalized) Einstein-Podolski-Rosen quadratures of suitable temporal modes of the stationary light field. Squeezing can reach levels of up to 50% of noise reduction below shot noise in the limit of large quantum cooperativity. Remarkably, entanglement persists even in the opposite limit of small cooperativity. Viewing the optomechanical device as a position sensor, entanglement between mechanics and light is an instance of object-apparatus entanglement predicted by quantum measurement theory.

quant-ph↗

arXiv2015

Observation of non-Markovian micro-mechanical Brownian motion

All physical systems are to some extent open and interacting with their environment. This insight, basic as it may seem, gives rise to the necessity of protecting quantum systems from decoherence in quantum technologies and is at the heart of the emergence of classical properties in quantum physics. The precise decoherence mechanisms, however, are often unknown for a given system. In this work, we make use of an opto-mechanical resonator to obtain key information about spectral densities of its condensed-matter heat bath. In sharp contrast to what is commonly assumed in high-temperature quantum Brownian motion describing the dynamics of the mechanical degree of freedom, based on a statistical analysis of the emitted light, it is shown that this spectral density is highly non-Ohmic, reflected by non-Markovian dynamics, which we quantify. We conclude by elaborating on further applications of opto-mechanical systems in open system identification.

quant-ph↗

arXiv2014

Tensile strained $In_{x}Ga_{1-x}P$ membranes for cavity optomechanics

We investigate the optomechanical properties of tensile-strained ternary InGaP nanomembranes grown on GaAs. This material system combines the benefits of highly strained membranes based on stoichiometric silicon nitride, with the unique properties of thin-film semiconductor single crystals, as previously demonstrated with suspended GaAs. Here we employ lattice mismatch in epitaxial growth to impart an intrinsic tensile strain to a monocrystalline thin film (approximately 30 nm thick). These structures exhibit mechanical quality factors of 2*10^6 or beyond at room temperature and 17 K for eigenfrequencies up to 1 MHz, yielding Q*f products of 2*10^12 Hz for a tensile stress of ~170 MPa. Incorporating such membranes in a high finesse Fabry-Perot cavity, we extract an upper limit to the total optical loss (including both absorption and scatter) of 40 ppm at 1064 nm and room temperature. Further reductions of the In content of this alloy will enable tensile stress levels of 1 GPa, with the potential for a significant increase in the Q*f product, assuming no deterioration in the mechanical loss at this composition and strain level. This materials system is a promising candidate for the integration of strained semiconductor membrane structures with low-loss semiconductor mirrors and for realizing stacks of membranes for enhanced optomechanical coupling.

cond-mat.mes-hall↗

arXiv2013

Cooling-by-measurement and mechanical state tomography via pulsed optomechanics

Observing a physical quantity without disturbing it is a key capability for the control of individual quantum systems. Such back-action-evading or quantum-non-demolition measurements were first introduced in the 1970s in the context of gravitational wave detection to measure weak forces on test masses by high precision monitoring of their motion. Now, such techniques have become an indispensable tool in quantum science for preparing, manipulating, and detecting quantum states of light, atoms, and other quantum systems. Here we experimentally perform rapid optical quantum-noise-limited measurements of the position of a mechanical oscillator by using pulses of light with a duration much shorter than a period of mechanical motion. Using this back-action evading interaction we performed both state preparation and full state tomography of the mechanical motional state. We have reconstructed mechanical states with a position uncertainty reduced to 19 pm, limited by the quantum fluctuations of the optical pulse, and we have performed `cooling-by-measurement' to reduce the mechanical mode temperature from an initial 1100 K to 16 K. Future improvements to this technique may allow for quantum squeezing of mechanical motion, even from room temperature, and reconstruction of non-classical states exhibiting negative regions in their phase-space quasi-probability distribution.

quant-ph↗

arXiv2013

Cavity Optomechanics of Levitated Nano-Dumbbells: Non-Equilibrium Phases and Self-Assembly

Levitated nanospheres in optical cavities open a novel route to study many-body systems out of solution and highly isolated from the environment. We show that properly tuned optical parameters allow for the study of the non-equilibrium dynamics of composite nano-particles with non-isotropic optical friction. We find friction induced ordering and nematic transitions with non-equilibrium analogs to liquid crystal phases for ensembles of dimers.

cond-mat.mes-hall↗

arXiv2012

Quantum State Orthogonalization and a Toolset for Quantum Optomechanical Phonon Control

We introduce a method that can orthogonalize any pure continuous variable quantum state, i.e. generate a state $|ψ_\perp>$ from $|ψ>$ where $<ψ|ψ_\perp> = 0$, which does not require significant a priori knowledge of the input state. We illustrate how to achieve orthogonalization using the Jaynes-Cummings or beam-splitter interaction, which permits realization in a number of systems. Furthermore, we demonstrate how to orthogonalize the motional state of a mechanical oscillator in a cavity optomechanics context by developing a set of coherent phonon level operations. As the mechanical oscillator is a stationary system such operations can be performed at multiple times, providing considerable versatility for quantum state engineering applications. Utilizing this, we additionally introduce a method how to transform any known pure state into any desired target state.

quant-ph↗

arXiv2011

Pulsed quantum optomechanics

Studying mechanical resonators via radiation pressure offers a rich avenue for the exploration of quantum mechanical behavior in a macroscopic regime. However, quantum state preparation and especially quantum state reconstruction of mechanical oscillators remains a significant challenge. Here we propose a scheme to realize quantum state tomography, squeezing and state purification of a mechanical resonator using short optical pulses. The scheme presented allows observation of mechanical quantum features despite preparation from a thermal state and is shown to be experimentally feasible using optical microcavities. Our framework thus provides a promising means to explore the quantum nature of massive mechanical oscillators and can be applied to other systems such as trapped ions.

quant-ph↗

arXiv2011

Large Quantum Superpositions and Interference of Massive Nanometer-Sized Objects

We propose a method to prepare and verify spatial quantum superpositions of a nanometer-sized object separated by distances of the order of its size. This method provides unprecedented bounds for objective collapse models of the wave function by merging techniques and insights from cavity quantum optomechanics and matter wave interferometry. An analysis and simulation of the experiment is performed taking into account standard sources of decoherence. We provide an operational parameter regime using present day and planned technology.

quant-ph↗

arXiv2010

Single-photon optomechanics in the strong coupling regime

We give a theoretical description of a coherently driven opto-mechanical system with a single added photon. The photon source is modeled as a cavity which initially contains one photon and which is irreversibly coupled to the opto-mechanical system. We show that the probability for the additional photon to be emitted by the opto-mechanical cavity will exhibit oscillations under a Lorentzian envelope, when the driven interaction with the mechanical resonator is strong enough. Our scheme provides a feasible route towards quantum state transfer between optical photons and micromechanical resonators.

quant-ph↗

arXiv2009

Phase-noise induced limitations on cooling and coherent evolution in opto-mechanical systems

We present a detailed theoretical discussion of the effects of ubiquitous laser noise on cooling and the coherent dynamics in opto-mechanical systems. Phase fluctuations of the driving laser induce modulations of the linearized opto-mechanical coupling as well as a fluctuating force on the mirror due to variations of the mean cavity intensity. We first evaluate the influence of both effects on cavity cooling and find that for a small laser linewidth the dominant heating mechanism arises from intensity fluctuations. The resulting limit on the final occupation number scales linearly with the cavity intensity both under weak and strong coupling conditions. For the strong coupling regime, we also determine the effect of phase noise on the coherent transfer of single excitations between the cavity and the mechanical resonator and obtain a similar conclusion. Our results show that conditions for optical ground state cooling and coherent operations are experimentally feasible and thus laser phase noise does pose a challenge but not a stringent limitation for opto-mechanical systems.

quant-ph↗

arXiv2008

Establishing EPR-channels between Nanomechanics and Atomic Ensembles

We suggest to interface nanomechanical systems via an optical quantum bus to atomic ensembles, for which means of high precision state preparation, manipulation and measurement are available. This allows in particular for a Quantum Non-Demolition Bell measurement, projecting the coupled system, atomic ensemble - nanomechanical resonator, into an entangled EPR-state. The entanglement is observable even for nanoresonators initially well above their ground states and can be utilized for teleportation of states from an atomic ensemble to the mechanical system.

quant-ph↗

arXiv2007

A high-reflectivity high-Q micromechanical Bragg-mirror

We report on the fabrication and characterization of a micromechanical oscillator consisting only of a free-standing dielectric Bragg mirror with high optical reflectivity and high mechanical quality. The fabrication technique is a hybrid approach involving laser ablation and dry etching. The mirror has a reflectivity of 99.6%, a mass of 400ng, and a mechanical quality factor Q of approximately 10^4. Using this micromirror in a Fabry Perot cavity, a finesse of 500 has been achieved. This is an important step towards designing tunable high-Q high-finesse cavities on chip.

cond-mat.mtrl-sci↗

arXiv2006

Optomechanical entanglement between a movable mirror and a cavity field

We show how stationary entanglement between an optical cavity field mode and a macroscopic vibrating mirror can be generated by means of radiation pressure. We also show how the generated optomechanical entanglement can be quantified and we suggest an experimental readout-scheme to fully characterize the entangled state. Surprisingly, such optomechanical entanglement is shown to persist for environment temperatures above 20K using state-of-the-art experimental parameters.

quant-ph↗

arXiv2006

Self-cooling of a micro-mirror by radiation pressure

We demonstrate passive feedback cooling of a mechanical resonator based on radiation pressure forces and assisted by photothermal forces in a high-finesse optical cavity. The resonator is a free-standing high-reflectance micro-mirror (of mass m=400ng and mechanical quality factor Q=10^4) that is used as back-mirror in a detuned Fabry-Perot cavity of optical finesse F=500. We observe an increased damping in the dynamics of the mechanical oscillator by a factor of 30 and a corresponding cooling of the oscillator modes below 10 K starting from room temperature. This effect is an important ingredient for recently proposed schemes to prepare quantum entanglement of macroscopic mechanical oscillators.

quant-ph↗

arXiv2006

Creating and probing macroscoping entanglement with light

We describe a scheme showing signatures of macroscopic optomechanical entanglement generated by radiation pressure in a cavity system with a massive movable mirror. The system we consider reveals genuine multipartite entanglement. We highlight the way the entanglement involving the inaccessible massive object is unravelled, in our scheme, by means of field-field quantum correlations.

quant-ph↗