arXiv subjects

M. Bolzonella

Publications and source records attributed to M. Bolzonella.

At least 37 records · Page 2Linked to original sources

arXiv2026

Euclid preparation. Far-infrared predictions for Euclid galaxy catalogues: cluster, protocluster, and field

The MAMBO mock galaxy catalogue, based on the Millennium Simulation with empirically assigned galaxy properties, provides predictions of FIR fluxes and physical parameters of Euclid-detectable galaxies. Predicted FIR flux distributions confirm that only the brightest Euclid sources will be detectable in existing FIR surveys. We employ stacking to measure the mean dust properties as a function of stellar mass and redshift. We find dust temperatures and infrared luminosities increase with redshift across all mass bins, while dust masses remain roughly constant. FIR number counts from MAMBO show overall good agreement with observations, and the total infrared luminosity function reproduces published estimates across most redshift ranges, extending to z~10. Comparing the Euclid Wide and Deep Surveys, we find that the EDS recovers the total IRLF to fainter luminosities and higher redshifts (up to z~6 in $I_E$), although its detectability falls below 80% at z>4, whereas the EWS becomes strongly incomplete beyond z~2. We also examine the dependence of the IRLF on environment. Schechter fits indicate that the faint-end slope $α$ flattens with redshift for cluster and protocluster galaxies, while remaining approximately constant for field populations. Imposing additional detection limits from Herschel-PACS and SPIRE shows that only the most luminous ($L_{IR}$ > $10^{12.5}$ $L_{\odot}$) galaxies remain detectable at z~4, but the limited MAMBO area (3.14$deg^2$) is inadequate for statistically robust (>3$σ$) constraints. Survey areas at least 30 times larger are required. Overall, the MAMBO FIR extension reproduces key number count and IRLF trends, provides realistic predictions for FIR-detected Euclid galaxies, and highlights the importance of synergies with current and future FIR/sub-mm facilities to probe environmental dependence with sufficient depth and area.

astro-ph.GA↗

arXiv2026

Euclid Quick Data Release (Q1): Euclid spectroscopy of quasars. 1. Identification and redshift determination of 3500 bright quasars

The slitless spectroscopy mode of the NISP onboard Euclid has enabled efficient spectroscopy of objects within a large FoV. We present a large and homogeneous sample of bright quasars identified from the Euclid Quick Data Release (Q1) by combining high-purity candidate selections from Gaia and WISE with the NISP spectra. Through visual inspection of the Euclid spectra of these quasar candidates, we identify approximately 3500 quasars with reliable redshifts at $0<z\lesssim 4.8$. Of these, 2686 are new spectroscopic identifications relative to existing public compilations. We generate the first Euclid composite spectrum of quasars covering rest-frame NUV to NIR wavelengths without telluric lines, which will be pivotal to NIR quasar spectral analysis. We obtain an empirical spectroscopic depth of $J_{\rm E}\lesssim 21.5$ and $H_{\rm E}\lesssim 21.3$ at the sensitivity of the Wide Field Survey, beyond which the number of securely identified quasars declines sharply. We analyse VIS morphologies using Sersic and CAS metrics, and a deep-learning PSF fraction to track nuclear dominance. At low redshift ($z<0.5$), obvious host structures are common and a single Sersic model fits about half of the sources; at intermediate redshift ($0.5<z<2$), the nuclear component dominates, with 90% of the Sersic fits saturating at the upper index limit. In this intermediate redshift regime, $f_{\rm PSF}$ is available, and we use it as a more reliable compactness measure than the single-Sersic and CAS parameters to quantify nuclear versus host emission. We also explore the novel Euclid NIR colour space and discuss the role of these quasars in refining AGN selection techniques for future Euclid data releases. The spectroscopic bright quasar catalogue of this work, and the composite quasar spectrum, will be available at https://cdsarc.cds.unistra.fr/. (abridged)

astro-ph.GA↗

arXiv2026

Euclid: Early Release Observations -- The star-formation history of massive early-type galaxies in the Perseus cluster

The Euclid Early Release Observations (ERO) programme targeted the Perseus galaxy cluster in its central region over 0.7deg$^2$. We combined the exceptional image quality and depth of the ERO-Perseus with FUV and NUV observations from GALEX and AstroSat/UVIT, as well as $ugrizHα$ data from MegaCam at the CFHT, to deliver FUV-to-NIR magnitudes of the 87 brightest galaxies within the Perseus cluster. We reconstructed the star-formation history (SFH) of 59 early-type galaxies (ETGs) within the sample, through the spectral energy distribution (SED) fitting code CIGALE and state-of-the-art stellar population (SP) models to reproduce the galactic UV emission from hot, old, low-mass stars (i.e. the UV upturn). In addition, for the six most massive ETGs in Perseus [stellar masses $\log_{10}(M_{\ast}/M_{\odot}) \geq 10.3$], we analysed their spatially resolved SP through a radial SED fitting. In agreement with our previous work on Virgo ETGs, we found that (i) the majority of ETGs needs the presence of an UV upturn to explain their FUV emission, with temperatures $\langle T_{\rm UV}\rangle$~33800 K; (ii) ETGs have grown their stellar masses quickly, with SF timescales $τ\lesssim 1500$ Myr. We found that all ETGs in the sample have formed more than about 30% of their stellar masses at z~5, up to ~100%. At z~5, the stellar masses of the most massive nearby ETGs, which have present-day stellar masses $\log_{10}(M_{\ast}/M_{\odot})\gtrsim 10.8$, are then found to be comparable to those of the red quiescent galaxies observed by JWST at similar redshifts (z>4.6). This study can be extended to ETGs in the 14000 deg$^2$ extragalactic sky that will soon be observed by Euclid, in combination with those from other major upcoming surveys (e.g. Rubin/LSST), and UV observations, to ultimately assess whether the nearby massive ETGs represent the progeny of the massive high-z JWST red quiescent galaxies.

astro-ph.GA↗

arXiv2026

Euclid Quick Data Release (Q1). Quenching precedes bulge formation in dense environments but follows it in the field

(Abridged) The bimodality between star-forming discs and quiescent spheroids requires the existence of two main processes: the galaxy quenching and the morphological transformation. In this paper, we aim to understand the link between these processes and their relation with the stellar mass of galaxies and their local environment. Taking advantage of the first data released by the Euclid Collaboration, covering more than 60 deg2 with space-based imaging and photometry, we analyse a mass-complete sample of nearly one million galaxies in the range 0.25 10^{9.5} M_\odot$. We divide the sample into four sub-populations of galaxies, based on their star-formation activity and morphology. We then analyse the physical properties of these populations and their relative abundances in the stellar mass vs. local density plane. Together with confirming the passivity-density relation and the morphology-density relation, we find that quiescent discy galaxies are more abundant in the low-mass regime of high-density environment. At the same time, star-forming bulge-dominated galaxies are more common in field regions, preferentially at high masses. Building on these results and interpreting them through comparison with simulations, we propose a scenario where the evolution of galaxies in the field significantly differs from that in higher-density environments. The morphological transformation in the majority of field galaxies takes place before the onset of quenching and is mainly driven by secular processes taking place within the main sequence, leading to the formation of star-forming bulge-dominated galaxies as intermediate-stage galaxies. Conversely, quenching of star formation precedes morphological transformation for most galaxies in higher-density environments. This causes the formation of quiescent disc-dominated galaxies before their transition into bulge-dominated ones.

astro-ph.GA↗

arXiv2026

Euclid: Improving redshift distribution reconstruction using a deep-to-wide transfer function

The Euclid mission seeks to understand the Universe expansion history and the nature of dark energy, which requires a very accurate estimate of redshift distribution. Achieving this accuracy relies on reference samples with spectroscopic redshifts, together with a procedure to match them to survey sources for which only photometric redshifts are available. One important source of systematic uncertainty is the mismatch in photometric properties between galaxies in the Euclid survey and the reference objects. We develop a method to degrade the photometry of objects with deep photometry to match the properties of any shallower survey in the multi-band photometric space, preserving all the correlations between the fluxes and their uncertainties. We compare our transfer method with more demanding image-based methods, such as Balrog from the Dark Energy Survey Collaboration. According to metrics, our method outperforms Balrog. We implement it in the redshift distribution reconstruction, based on the self-organising map approach of arXiv:1509.03318, and test it using a realistic sample from the Euclid Flagship Simulation. We find that the key ingredient is to ensure that the reference objects are distributed in the colour space the same way as the wide-survey objects, which can be efficiently achieved with our transfer method. In our best implementation, the mean redshift biases are consistently reduced across the tomographic bins, bringing a significant fraction of them within the Euclid accuracy requirements in all tomographic bins. Equally importantly, the tests allow us to pinpoint which step in the calibration pipeline has the strongest impact on achieving the required accuracy. Our approach also reproduces the overall redshift distributions, which are crucial for applications such as angular clustering.

astro-ph.CO↗

arXiv2025

Euclid: Photometric redshift calibration with self-organising maps

The Euclid survey aims to trace the evolution of cosmic structures up to redshift $z$ $\sim$ 3 and beyond. Its success depends critically on obtaining highly accurate mean redshifts for ensembles of galaxies $n(z)$ in all tomographic bins, essential for deriving robust cosmological constraints. However, photometric redshifts (photo-$z$s) suffer from systematic biases arising from various sources of uncertainty. To address these challenges, we utilised self-organising maps (SOMs) with mock samples resembling the Euclid Wide Survey (EWS), to validate Euclid's uncertainty requirement of $|Δ\langle z \rangle| = \langle z_{\text{est}} \rangle - \langle z \rangle \leq 0.002 (1+z)$ per tomographic bin, assuming DR3-level data. We observe that defining the redshift tomography using the mean spectroscopic redshift (spec-$z$) per SOM cell, results in none of the ten tomographic redshift bins satisfying the requirement. In contrast, the redshift tomography on the photo-$z$s of the EWS-like sample yields superior results, with eight out of ten bins [$0 < z\leq 2.5$] meeting the Euclid requirement. To enhance the realism of our study, we morph our calibration sample to mimic the C3R2 survey in incremental steps. In this context, a maximum of six out of ten bins meet the requirement, strongly advocating the adoption of a redshift tomography defined by the photo-$z$s of individual galaxies rather than the commonly used mean spec-$z$ of SOM cells. To examine the impact on the expected biases for $Ω_{\text{m}}$, $σ_{8}$, and $Δw_{0}$ measured by Euclid, we perform a Fisher forecast for cosmic shear only, based on our redshift uncertainties. Here, we find that even under an evaluation of the uncertainty where the impact of the redshift bias is substantial, most absolute biases remain below 0.1$σ$ in the idealised scenario and below 0.3$σ$ in the more realistic case.

astro-ph.CO↗

arXiv2025

Euclid preparation. Predicting star-forming galaxy scaling relations with the spectral stacking code SpectraPyle

We introduce SpectraPyle, a versatile spectral stacking pipeline developed for the Euclid mission's NISP spectroscopic surveys, aimed at extracting faint emission lines and spectral features from large galaxy samples in the Wide and Deep Surveys. Designed for computational efficiency and flexible configuration, SpectraPyle supports the processing of extensive datasets critical to Euclid's non-cosmological science goals. We validate the pipeline using simulated spectra processed to match Euclid's expected final data quality. Stacking enables robust recovery of key emission lines, including Halpha, Hbeta, [O III], and [N II], below individual detection limits. However, the measurement of galaxy properties such as star formation rate, dust attenuation, and gas-phase metallicity are biased at stellar mass below log10(M*/Msol) ~ 9 due to the flux-limited nature of Euclid spectroscopic samples, which cannot be overcome by stacking. The SFR-stellar mass relation of the parent sample is recovered reliably only in the Deep survey for log10(M*/Msol) > 10, whereas the metallicity-mass relation is recovered more accurately over a wider mass range. These limitations are caused by the increased fraction of redshift measurement errors at lower masses and fluxes. We examine the impact of residual redshift contaminants that arises from misidentified emission lines and noise spikes, on stacked spectra. Even after stringent quality selections, low-level contamination (< 6%) has minimal impact on line fluxes due to the systematically weaker emission of contaminants. Percentile-based analysis of stacked spectra provides a sensitive diagnostic for detecting contamination via coherent spurious features at characteristic wavelengths. While our simulations include most instrumental effects, real Euclid data will require further refinement of contamination mitigation strategies.

astro-ph.GA↗

arXiv2025

Euclid Quick Data Release (Q1). First detections from the galaxy cluster workflow

The first survey data release by the Euclid mission covers approximately $63\,\mathrm{deg^2}$ in the Euclid Deep Fields to the same depth as the Euclid Wide Survey. This paper showcases, for the first time, the performance of cluster finders on Euclid data and presents examples of validated clusters in the Quick Release 1 (Q1) imaging data. We identify clusters using two algorithms (AMICO and PZWav) implemented in the Euclid cluster-detection pipeline. We explore the internal consistency of detections from the two codes, and cross-match detections with known clusters from other surveys using external multi-wavelength and spectroscopic data sets. This enables assessment of the Euclid photometric redshift accuracy and also of systematics such as mis-centring between the optical cluster centre and centres based on X-ray and/or Sunyaev--Zeldovich observations. We report 426 joint PZWav and AMICO-detected clusters with high signal-to-noise ratios over the full Q1 area in the redshift range $0.2 \leq z \leq 1.5$. The chosen redshift and signal-to-noise thresholds are motivated by the photometric quality of the early Euclid data. We provide richness estimates for each of the Euclid-detected clusters and show its correlation with various external cluster mass proxies. Out of the full sample, 77 systems are potentially new to the literature. Overall, the Q1 cluster catalogue demonstrates a successful validation of the workflow ahead of the Euclid Data Release 1, based on the consistency of internal and external properties of Euclid-detected clusters.

astro-ph.CO↗

arXiv2025

Euclid: Early Release Observations -- Interplay between dwarf galaxies and their globular clusters in the Perseus galaxy cluster

We present an analysis of globular clusters (GCs) of dwarf galaxies in the Perseus galaxy cluster to explore the relationship between dwarf galaxy properties and their GCs. Our focus is on GC numbers ($N_{\rm GC}$) and GC half-number radii ($R_{\rm GC}$) around dwarf galaxies, and their relations with host galaxy stellar masses ($M_*$), central surface brightnesses ($μ_0$), and effective radii ($R_{\rm e}$). Interestingly, we find that at a given stellar mass, $R_{\rm GC}$ is almost independent of the host galaxy $μ_0$ and $R_{\rm e}$, while $R_{\rm GC}/R_{\rm e}$ depends on $μ_0$ and $R_{\rm e}$; lower surface brightness and diffuse dwarf galaxies show $R_{\rm GC}/R_{\rm e}\approx 1$ while higher surface brightness and compact dwarf galaxies show $R_{\rm GC}/R_{\rm e}\approx 1.5$-$2$. This means that for dwarf galaxies of similar stellar mass, the GCs have a similar median extent; however, their distribution is different from the field stars of their host. Additionally, low surface brightness and diffuse dwarf galaxies on average have a higher $N_{\rm GC}$ than high surface brightness and compact dwarf galaxies at any given stellar mass. We also find that UDGs (ultra-diffuse galaxies) and non-UDGs have similar $R_{\rm GC}$, while UDGs have smaller $R_{\rm GC}/R_{\rm e}$ (typically less than 1) and 3-4 times higher $N_{\rm GC}$ than non-UDGs. Examining nucleated and not-nucleated dwarf galaxies, we find that for $M_*>10^8M_{\odot}$, nucleated dwarf galaxies seem to have smaller $R_{\rm GC}$ and $R_{\rm GC}/R_{\rm e}$, with no significant differences between their $N_{\rm GC}$, except at $M_*<10^8M_{\odot}$ where the nucleated dwarf galaxies tend to have a higher $N_{\rm GC}$. Lastly, we explore the stellar-to-halo mass ratio (SHMR) of dwarf galaxies and conclude that the Perseus cluster dwarf galaxies follow the expected SHMR at $z=0$ extrapolated down to $M_*=10^6M_{\odot}$.

astro-ph.GA↗

arXiv2025

Euclid preparation. Establishing the quality of the 2D reconstruction of the filaments of the cosmic web with DisPerSE using Euclid photometric redshifts

Cosmic filaments are prominent structures of the matter distribution of the Universe. Modern detection algorithms are an efficient way to identify filaments in large-scale observational surveys of galaxies. Many of these methods were originally designed to work with simulations and/or well-sampled spectroscopic surveys. When spectroscopic redshifts are not available, the filaments of the cosmic web can be detected in projection using photometric redshifts in slices along the Line of Sight, which enable the exploration of larger cosmic volumes. However, this comes at the expense of a lower redshift precision. It is therefore crucial to assess the differences between filaments extracted from exact redshifts and from photometric redshifts for a specific survey. We apply this analysis to capture the uncertainties and biases of filament extractions introduced by using the photometric sample of the Euclid Wide Survey. The question that we address in this work is how can we compare two filament samples derived with redshifts of different precisions in the Euclid Wide Survey context. We apply the cosmic web detection algorithm DisPerSE, in the redshift range $0.1 \leq z \leq 0.5$, to the GAlaxy Evolution and Assembly (GAEA) simulated galaxy sample which reproduces several characteristics of the Euclid Wide Survey. We develop a method to compare skeletons derived from photometric redshifts to those derived from true galaxy positions. This method expands the commonly used measure of distance between filaments to include geometrical (angles between filaments) and astrophysical considerations (galaxy mass gradients and connectivity-mass relations). We assess whether this approach strengthens our ability to correctly identify filaments in very large surveys such as the Euclid Wide Survey. [abridged]

astro-ph.CO↗

arXiv2025

Euclid preparation. Spatially resolved stellar populations of local galaxies with Euclid: a proof of concept using synthetic images with the TNG50 simulation

The European Space Agency's Euclid mission will observe approximately 14,000 $\rm{deg}^{2}$ of the extragalactic sky and deliver high-quality imaging for many galaxies. The depth and high spatial resolution of the data will enable a detailed analysis of stellar population properties of local galaxies. In this study, we test our pipeline for spatially resolved SED fitting using synthetic images of Euclid, LSST, and GALEX generated from the TNG50 simulation. We apply our pipeline to 25 local simulated galaxies to recover their resolved stellar population properties. We produce 3 types of data cubes: GALEX + LSST + Euclid, LSST + Euclid, and Euclid-only. We perform the SED fitting tests with two SPS models in a Bayesian framework. Because the age, metallicity, and dust attenuation estimates are biased when applying only classical formulations of flat priors, we examine the effects of additional priors in the forms of mass-age-$Z$ relations, constructed using a combination of empirical and simulated data. Stellar-mass surface densities can be recovered well using any of the 3 data cubes, regardless of the SPS model and prior variations. The new priors then significantly improve the measurements of mass-weighted age and $Z$ compared to results obtained without priors, but they may play an excessive role compared to the data in determining the outcome when no UV data is available. The spatially resolved SED fitting method is powerful for mapping the stellar populations of galaxies with the current abundance of high-quality imaging data. Our study re-emphasizes the gain added by including multiwavelength data from ancillary surveys and the roles of priors in Bayesian SED fitting. With the Euclid data alone, we will be able to generate complete and deep stellar mass maps of galaxies in the local Universe, thus exploiting the telescope's wide field, NIR sensitivity, and high spatial resolution.

astro-ph.GA↗

arXiv2025

Euclid: Early Release Observations -- The surface brightness and colour profiles of the far outskirts of galaxies in the Perseus cluster

The Perseus field captured by Euclid as part of its Early Release Observations provides a unique opportunity to study cluster environment ranging from outskirts to dense regions. Leveraging unprecedented optical and near-infrared depths, we investigate the stellar structure of massive disc galaxies in this field. This study focuses on outer disc profiles, including simple exponential (Type I), down- (Type II) and up-bending break (Type III) profiles, and their associated colour gradients, to trace late assembly processes across various environments. Type II profiles, though relatively rare in high dense environments, appear stabilised by internal mechanisms like bars and resonances, even within dense cluster cores. Simulations suggest that in dense environments, Type II profiles tend to evolve into Type I profiles over time. Type III profiles often exhibit small colour gradients beyond the break, hinting at older stellar populations, potentially due to radial migration or accretion events. We analyse correlations between galaxy mass, morphology, and profile types. Mass distributions show weak trends of decreasing mass from the centre to the outskirts of the Perseus cluster. Type III profiles become more prevalent, while Type I profiles decrease in lower-mass galaxies with cluster centric distance. Type I profiles dominate in spiral galaxies, while Type III profiles are more common in S0 galaxies. Type II profiles are consistently observed across all morphological types. While the limited sample size restricts statistical power, our findings shed light on the mechanisms shaping galaxy profiles in cluster environments. Future work should extend observations to the cluster outskirts to enhance statistical significance. Additionally, 3D velocity maps are needed to achieve a non-projected view of galaxy positions, offering deeper insights into spatial distribution and dynamics.

astro-ph.GA↗

arXiv2025

Euclid: Early Release Observations of ram-pressure stripping in the Perseus cluster. Detection of parsec scale star formation with in the low surface brightness stripped tails of UGC 2665 and MCG +07-07-070

Euclid is delivering optical and near-infrared imaging data over 14,000 deg$^2$ on the sky at spatial resolution and surface brightness levels that can be used to understand the morphological transformation of galaxies within groups and clusters. Using the Early Release Observations (ERO) of the Perseus cluster, we demonstrate the capability offered by Euclid in studying the nature of perturbations for galaxies in clusters. Filamentary structures are observed along the discs of two spiral galaxies with no extended diffuse emission expected from tidal interactions at surface brightness levels of $\sim$ $30\,{\rm mag}\,{\rm arcsec}^{-2}$. The detected features exhibit a good correspondence in morphology between optical and near-infrared wavelengths, with a surface brightness of $\sim$ $25\,{\rm mag}\,{\rm arcsec}^{-2}$, and the knots within the features have sizes of $\sim$ 100 pc, as observed through $I_E$ imaging. Using the Euclid, CFHT, UVIT, and LOFAR $144\,{\rm MHz}$ radio continuum observations, we conduct a detailed analysis to understand the origin of the detected features. We constructed the \textit{Euclid} $I_E-Y_E$, $Y_E-H_E$, and CFHT $u - r$, $g - i$ colour-colour plane and showed that these features contain recent star formation events, which are also indicated by their H$α$ and NUV emissions. Euclid colours alone are insufficient for studying stellar population ages in unresolved star-forming regions, which require multi-wavelength optical imaging data. The morphological shape, orientation, and mean age of the stellar population, combined with the presence of extended radio continuum cometary tails can be consistently explained if these features have been formed during a recent ram-pressure stripping event. This result further confirms the exceptional qualities of Euclid in the study of galaxy evolution in dense environments.

astro-ph.GA↗

arXiv2025

Euclid Quick Data Release (Q1). A first view of the star-forming main sequence in the Euclid Deep Fields

The star-forming main sequence (SFMS) is a tight relation observed between stellar masses and star formation rates (SFR) in a population of galaxies. This relation is observed at different redshifts, in various morphological, and environmental domains, and is key to understanding the underlying relations between a galaxy budget of cold gas and its stellar content. Euclid Quick Data Release 1 (Q1) gives us the opportunity to investigate this fundamental relation in galaxy formation and evolution. We complement the Euclid release with public IRAC observations of the Euclid Deep Fields, improving the quality of recovered photometric redshifts, stellar masses, and SFRs, as is shown both with simulations and a comparison with available spectroscopic redshifts. From Q1 data alone, we recover more than $\sim 30\,\mathrm{k}$ galaxies with $\log_{10} (M_\ast/M_\odot) > 11$, giving a precise constraint of the SFMS at the high-mass end. We investigated the SFMS, in a redshift interval between $0.2$ and $3.0$, comparing our results with the existing literature and fitting them with a parameterisation taking into account the presence of a bending of the relation at the high-mass end, depending on the bending mass, $M_0$. We find good agreement with previous results in terms of $M_0$ values, and an increasing trend for the relation scatter at higher stellar masses. We also investigate the distribution of physical (e.g. dust absorption, $A_V$, and formation age) and morphological properties (e.g., Sérsic index and radius) in the SFR--stellar mass plane, and their relation with the SFMS. These results highlight the potential of Euclid in studying the fundamental scaling relations that regulate galaxy formation and evolution in anticipation of the forthcoming Data Release 1.

astro-ph.GA↗

arXiv2025

Euclid: The Early Release Observations Lens Search Experiment

We investigated the ability of the Euclid telescope to detect galaxy-scale gravitational lenses. To do so, we performed a systematic visual inspection of the $0.7\,\rm{deg}^2$ Euclid Early Release Observations data towards the Perseus cluster using both the high-resolution $I_{\scriptscriptstyle\rm E}$ band and the lower-resolution $Y_{\scriptscriptstyle\rm E}$, $J_{\scriptscriptstyle\rm E}$, $H_{\scriptscriptstyle\rm E}$ bands. Each extended source brighter than magnitude 23 in $I_{\scriptscriptstyle\rm E}$ was inspected by 41 expert human classifiers. This amounts to $12\,086$ stamps of $10^{\prime\prime}\,\times\,10^{\prime\prime}$. We found $3$ grade A and $13$ grade B candidates. We assessed the validity of these $16$ candidates by modelling them and checking that they are consistent with a single source lensed by a plausible mass distribution. Five of the candidates pass this check, five others are rejected by the modelling, and six are inconclusive. Extrapolating from the five successfully modelled candidates, we infer that the full $14\,000\,{\rm deg}^2$ of the Euclid Wide Survey should contain $100\,000^{+70\,000}_{-30\,000}$ galaxy-galaxy lenses that are both discoverable through visual inspection and have valid lens models. This is consistent with theoretical forecasts of $170\,000$ discoverable galaxy-galaxy lenses in Euclid. Our five modelled lenses have Einstein radii in the range $0.\!\!^{\prime\prime}68\,<\,θ_\mathrm{E}\,<1.\!\!^{\prime\prime}24$, but their Einstein radius distribution is on the higher side when compared to theoretical forecasts. This suggests that our methodology is likely missing small-Einstein-radius systems. Whilst it is implausible to visually inspect the full Euclid dataset, our results corroborate the promise that Euclid will ultimately deliver a sample of around $10^5$ galaxy-scale lenses.

astro-ph.GA↗

arXiv2025

Euclid preparation. Estimating galaxy physical properties using CatBoost chained regressors with attention

Euclid will image ~14000 deg^2 of the extragalactic sky at visible and NIR wavelengths, providing a dataset of unprecedented size and richness that will facilitate a multitude of studies into the evolution of galaxies. In the vast majority of cases the main source of information will come from broad-band images and data products thereof. Therefore, there is a pressing need to identify or develop scalable yet reliable methodologies to estimate the redshift and physical properties of galaxies using broad-band photometry from Euclid, optionally including ground-based optical photometry also. To address this need, we present a novel method to estimate the redshift, stellar mass, star-formation rate, specific star-formation rate, E(B-V), and age of galaxies, using mock Euclid and ground-based photometry. The main novelty of our property-estimation pipeline is its use of the CatBoost implementation of gradient-boosted regression-trees, together with chained regression and an intelligent, automatic optimization of the training data. The pipeline also includes a computationally-efficient method to estimate prediction uncertainties, and, in the absence of ground-truth labels, provides accurate predictions for metrics of model performance up to z~2. We apply our pipeline to several datasets consisting of mock Euclid broad-band photometry and mock ground-based ugriz photometry, to evaluate the performance of our methodology for estimating the redshift and physical properties of galaxies detected in the Euclid Wide Survey. The quality of our photometric redshift and physical property estimates are highly competitive overall, validating our modeling approach. We find that the inclusion of ground-based optical photometry significantly improves the quality of the property estimation, highlighting the importance of combining Euclid data with ancillary ground-based optical data. (Abridged)

astro-ph.GA↗

arXiv2025

Euclid preparation. LXVIII. Extracting physical parameters from galaxies with machine learning

The Euclid mission is generating a vast amount of imaging data in four broadband filters at high angular resolution. This will allow the detailed study of mass, metallicity, and stellar populations across galaxies, which will constrain their formation and evolutionary pathways. Transforming the Euclid imaging for large samples of galaxies into maps of physical parameters in an efficient and reliable manner is an outstanding challenge. We investigate the power and reliability of machine learning techniques to extract the distribution of physical parameters within well-resolved galaxies. We focus on estimating stellar mass surface density, mass-averaged stellar metallicity and age. We generate noise-free, synthetic high-resolution imaging data in the Euclid photometric bands for a set of 1154 galaxies from the TNG50 cosmological simulation. The images are generated with the SKIRT radiative transfer code, taking into account the complex 3D distribution of stellar populations and interstellar dust attenuation. We use a machine learning framework to map the idealised mock observational data to the physical parameters on a pixel-by-pixel basis. We find that stellar mass surface density can be accurately recovered with a $\leq 0.130 {\rm \,dex}$ scatter. Conversely, stellar metallicity and age estimates are, as expected, less robust, but still contain significant information which originates from underlying correlations at a sub-kpc scale between stellar mass surface density and stellar population properties.

astro-ph.GA↗

arXiv2025

The COSMOS Wall at z ~ 0.73: Quiescent galaxies and their evolution in different environments

The evolution of quiescent galaxies is driven by numerous physical processes, often considered to be related to their stellar mass and environment over cosmic time. Tracing their stellar populations can provide insight into the processes that transformed these galaxies into their observed quiescent state. In particular, higher-redshift galaxies exhibit more pronounced relative age differences. At early stages, even small differences in age remain significant, whereas as galaxies evolve, these differences become harder to detect in the local Universe. The COSMOS Wall is a structure at z ~ 0.73 that contains a large variety of environments, from rich clusters down to field-like regions. This sample offers a great opportunity to study the effect of the environment on the quiescent galaxy population. Leveraging high-quality spectroscopic data from the LEGA-C survey, and photometric data from the COSMOS2020 catalogue, we performed a full-index and photometry fitting of 74 massive quiescent galaxies, deriving their mass-weighted ages, metallicities, and star formation timescales. We characterised the environment in three subsamples: X-ray and non-X-ray groups and a field subsample. We find a decreasing trend in mass-weighted age with increasing environmental density, with galaxies groups > 1 Gyr older than those in the field. Conversely, we do not find any significant difference in stellar metallicity between galaxies in X-ray and non-X-ray groups, while we find galaxies with 0.15 dex higher metallicities in the field. Our results indicate that, at z ~ 0.7, the environment plays a crucial role in shaping the evolution of massive quiescent galaxies, noticeably affecting both their mass-weighted age and star formation timescale. These results support faster quenching mechanisms, at fixed stellar mass, in the dense X-ray-detected groups compared to the field.

astro-ph.GA↗