arXiv subjects

M. Caccia

Publications and source records attributed to M. Caccia.

17 recordsLinked to original sources

arXiv2022

A cryogenic tracking detector for antihydrogen detection in the AEgIS experiment

We present the commissioning of the Fast Annihilation Cryogenic Tracker detector (FACT), installed around the antihydrogen production trap inside the 1 T superconducting magnet of the AEgIS experiment. FACT is designed to detect pions originating from the annihilation of antiprotons. Its 794 scintillating fibers operate at 4 K and are read out by silicon photomultipliers (MPPCs) at near room temperature. FACT provides the antiproton/antihydrogen annihilation position information with a few ns timing resolution. We present the hardware and software developments which led to the successful operation of the detector for antihydrogen detection and the results of an antiproton-loss based efficiency assessment. The main background to the antihydrogen signal is that of the positrons impinging onto the positronium conversion target and creating a large amount of gamma rays which produce a sizeable signal in the MPPCs shortly before the antihydrogen signal is expected. We detail the characterization of this background signal and its impact on the antihydrogen detection efficiency.

physics.ins-det↗

arXiv2022

Rydberg-positronium velocity and self-ionization studies in 1T magnetic field and cryogenic environment

We characterized the pulsed Rydberg-positronium production inside the AEgIS (Antimatter Experiment: Gravity, Interferometry, Spectroscopy) apparatus in view of antihydrogen formation by means of a charge exchange reaction between cold antiprotons and slow Rydberg-positronium atoms. Velocity measurements on positronium along two axes in a cryogenic environment (10K) and in 1T magnetic field were performed. The velocimetry was done by MCP-imaging of photoionized positronium previously excited to the $n=3$ state. One direction of velocity was measured via Doppler-scan of this $n=3$-line, another direction perpendicular to the former by delaying the exciting laser pulses in a time-of-flight measurement. Self-ionization in the magnetic field due to motional Stark effect was also quantified by using the same MCP-imaging technique for Rydberg positronium with an effective principal quantum number $n_{eff}$ ranging between 14 and 22. We conclude with a discussion about the optimization of our experimental parameters for creating Rydberg-positronium in preparation for an efficient pulsed production of antihydrogen.

physics.atom-ph↗

arXiv2019

Assessment of the potential of SiPM-based systems for bioluminescence detection

Bioluminescence detection requires single-photon sensitivity, extremely low detection limits and wide dynamic range. Such performances were traditionally assured by photomultiplier-tubes based systems. However, development of novel applications and industrialisation call for the introduction of more robust, compact and scalable devices. Silicon photomultipliers were recently put forward as the alternative to phototubes for a new generation of flexible and user friendly instruments. In this article, the figures of merit of a silicon-photomultiplier based system relying on a compact, low cost system are investigated. Possible implementations are proposed and a proof-of-principle bioluminescence measurement is performed.

physics.ins-det↗

arXiv2019

Efficient $2^3S$ positronium production by stimulated decay from the $3^3P$ level

We investigate experimentally the possibility of enhancing the production of $2^3S$ positronium atoms by driving the $1^3S$-$3^3P$ and $3^3P$-$2^3S$ transitions, overcoming the natural branching ratio limitation of spontaneous decay from $3^3P$ to $2^3S$. The decay of $3^3P$ positronium atoms towards the $2^3S$ level has been effciently stimulated by a 1312.2nm broadband IR laser pulse. The dependence of the stimulating transition efficiency on the intensity of the IR pulse has been measured to find the optimal enhancement conditions. A maximum relative increase of $ \times (3.1 \pm 1.0) $ in the $2^3S$ production efficiency, with respect to the case where only spontaneous decay is present, was obtained.

physics.atom-ph↗

arXiv2019

Velocity selected production of $2^3S$ metastable positronium

Positronium in the $2^3S$ metastable state exhibits a low electrical polarizability and a long lifetime (1140 ns) making it a promising candidate for interferometry experiments with a neutral matter-antimatter system. In the present work, $2^3S$ positronium is produced - in absence of electric field - via spontaneous radiative decay from the $3^3P$ level populated with a 205nm UV laser pulse. Thanks to the short temporal length of the pulse, 1.5 ns full-width at half maximum, different velocity populations of a positronium cloud emitted from a nanochannelled positron/positronium converter were selected by delaying the excitation pulse with respect to the production instant. $ 2^3S $ positronium atoms with velocity tuned between $ 7 \cdot 10^4 $ m/s and $ 10 \cdot 10^4 $ m/s were thus produced. Depending on the selected velocity, a $2^3S$ production effciency ranging from $\sim 0.8 \%$ to $\sim 1.7%$, with respect to the total amount of emitted positronium, was obtained. The observed results give a branching ratio for the $3^3P$-$2^3S$ spontaneous decay of $(9.7 \pm 2.7) \% $. The present velocity selection technique could allow to produce an almost monochromatic beam of $\sim 1 \cdot 10^3 $ $2^3S$ atoms with a velocity spread $ < 10^4 $ m/s and an angular divergence of $\sim$ 50 mrad.

physics.atom-ph↗

arXiv2018

Tests of a dual-readout fiber calorimeter with SiPM light sensors

In this paper, we describe the first tests of a dual-readout fiber calorimeter in which silicon photomultipliers are used to sense the (scintillation and Cherenkov) light signals. The main challenge in this detector is implementing a design that minimizes the optical crosstalk between the two types of fibers, which are located very close to each other and carry light signals that differ in intensity by about a factor of 60. The experimental data, which were obtained with beams of high-energy electrons and muons as well as in lab tests, illustrate to what extent this challenge was met. The Cherenkov light yield, a limiting factor for the energy resolution of this type of calorimeter, was measured to be about twice that of the previously tested configurations based on photomultiplier tubes. The lateral profiles of electromagnetic showers were measured on a scale of millimeters from the shower axis and significant differences were found between the profiles measured with the scintillating and the Cherenkov fibers.

physics.ins-det↗

arXiv2018

Producing long-lived $2^3\text{S}$ Ps via $3^3\text{P}$ laser excitation in magnetic and electric fields

Producing positronium (Ps) in the metastable $2^3\text{S}$ state is of interest for various applications in fundamental physics. We report here about an experiment in which Ps atoms are produced in this long-lived state by spontaneous radiative decay of Ps excited to the $3^3\text{P}$ level manifold. The Ps cloud excitation is obtained with a UV laser pulse in an experimental vacuum chamber in presence of guiding magnetic field of 25 mT and an average electric field of 300 V/cm. The indication of the $2^3\text{S}$ state production is obtained from a novel analysis technique of single-shot positronium annihilation lifetime spectra. Its production efficiency relative to the total amount of formed Ps is evaluated by fitting a simple rate equations model to the experimental data and found to be $ (2.1 \pm 1.3) \, \% $.

physics.atom-ph↗

arXiv2017

Measurement of antiproton annihilation on Cu, Ag and Au with emulsion films

The characteristics of low energy antiproton annihilations on nuclei (e.g. hadronization and product multiplicities) are not well known, and Monte Carlo simulation packages that use different models provide different descriptions of the annihilation events. In this study, we measured the particle multiplicities resulting from antiproton annihilations on nuclei. The results were compared with predictions obtained using different models in the simulation tools GEANT4 and FLUKA. For this study, we exposed thin targets (Cu, Ag and Au) to a very low energy antiproton beam from CERN's Antiproton Decelerator, exploiting the secondary beamline available in the AEgIS experimental zone. The antiproton annihilation products were detected using emulsion films developed at the Laboratory of High Energy Physics in Bern, where they were analysed at the automatic microscope facility. The fragment multiplicity measured in this study is in good agreement with results obtained with FLUKA simulations for both minimally and heavily ionizing particles.

hep-ex↗

arXiv2014

An Educational Kit Based on a Modular Silicon Photomultiplier System

Silicon Photo-Multipliers (SiPM) are state of the art light detectors with unprecedented single photon sensitivity and photon number resolving capability, representing a breakthrough in several fundamental and applied Science domains. An educational experiment based on a SiPM set-up is proposed in this article, guiding the student towards a comprehensive knowledge of this sensor technology while experiencing the quantum nature of light and exploring the statistical properties of the light pulses emitted by a LED.

physics.ins-det↗

arXiv2014

Annihilation of low energy antiprotons in silicon

The goal of the AE$\mathrm{\bar{g}}$IS experiment at the Antiproton Decelerator (AD) at CERN, is to measure directly the Earth's gravitational acceleration on antimatter. To achieve this goal, the AE$\mathrm{\bar{g}}$IS collaboration will produce a pulsed, cold (100 mK) antihydrogen beam with a velocity of a few 100 m/s and measure the magnitude of the vertical deflection of the beam from a straight path. The final position of the falling antihydrogen will be detected by a position sensitive detector. This detector will consist of an active silicon part, where the annihilations take place, followed by an emulsion part. Together, they allow to achieve 1$%$ precision on the measurement of $\bar{g}$ with about 600 reconstructed and time tagged annihilations. We present here, to the best of our knowledge, the first direct measurement of antiproton annihilation in a segmented silicon sensor, the first step towards designing a position sensitive silicon detector for the AE$\mathrm{\bar{g}}$IS experiment. We also present a first comparison with Monte Carlo simulations (GEANT4) for antiproton energies below 5 MeV

physics.ins-det↗

arXiv2001

Performance of a large limited streamer tube cell in drift mode

The performance of a large (3x3 $cm^2$) streamer tube cell in drift mode is shown. The detector space resolution has been studied using cosmic muons crossing an high precision silicon telescope. The experimental results are compared with a GARFIELD simulation.

physics.ins-det↗

arXiv2001

A Pixel Vertex Tracker for the TESLA Detector

In order to fully exploit the physics potential of a e+e- linear collider, such as TESLA, a Vertex Tracker providing high resolution track reconstruction is required. Hybrid Silicon pixel sensors are an attractive sensor technology option due to their read-out speed and radiation hardness, favoured in the high rate TESLA environment, but have been so far limited by the achievable single point space resolution. A novel layout of pixel detectors with interleaved cells to improve their spatial resolution is introduced and the results of the characterisation of a first set of test structures are discussed. In this note, a conceptual design of the TESLA Vertex Tracker, based on hybrid pixel sensors is presented

hep-ex↗

arXiv2001

Hybrid pixel detector development for the Linear collider Vertex Detector

In order to fully exploit the Physics potential of future e+ e- linear collider, a Vertex Detector providing high resolution track reconstruction is required. Hybrid Silicon pixel detectors are an attractive option for the sensor technology due to their read-out speed and radiation hardness but have been so far limited by the achievable single point resolution. A novel layout of hybrid pixel sensor with interleaved cells to improve the spatial resolution has been developed. The characterisation of the first processed prototypes is reported.

hep-ex↗

arXiv2001

Characterisation of Hybrid Pixel Detectors with capacitive charge division

In order to fully exploit the physics potential of the future high energy e+ e- linear collider, a Vertex Tracker providing high resolution track reconstruction is required. Hybrid pixel sensors are an attractive technology due to their fast read-out capabilities and radiation hardness. A novel pixel detector layout with interleaved cells between the readout nodes has been developed to improve the single point resolution. The results of the characterisation of the first processed prototypes are reported.

hep-ex↗

arXiv2000

Hybrid Pixel Detector Development for the Linear Collider Vertex Tracker

In order to fully exploit the physics potential of the future high energy e+e- linear collider, a Vertex Tracker able to provide particle track extrapolation with very high resolution is needed. Hybrid Si pixel sensors are an attractive technology due to their fast read-out capabilities and radiation hardness. A novel pixel detector layout with interleaved cells has been developed to improve the single point resolution. Results of the characterisation of the first processed prototypes by electrostatic measurements and charge collection studies are discussed.

hep-ex↗

arXiv1999

High Resolution Hybrid Pixel Sensors for the e+e- TESLA Linear Collider Vertex Tracker

In order to fully exploit the physics potential of a future high energy e+e- linear collider, a Vertex Tracker, providing high resolution track reconstruction, is required. Hybrid Silicon pixel sensors are an attractive option, for the sensor technology, due to their read-out speed and radiation hardness, favoured in the high rate environment of the TESLA e+e- linear collider design but have been so far limited by the achievable single point space resolution. In this paper, a conceptual design of the TESLA Vertex Tracker, based on a novel layout of hybrid pixel sensors with interleaved cells to improve their spatial resolution, is presented.

hep-ex↗

arXiv1999

High resolution pixel detectors for e+e- linear colliders

The physics goals at the future e+e- linear collider require high performance vertexing and impact parameter resolution. Two possible technologies for the vertex detector of an experimental apparatus are outlined in the paper: an evolution of the Hybrid Pixel Sensors already used in high energy physics experiments and a new detector concept based on the monolithic CMOS sensors.

hep-ex↗