arXiv subjects

M. Carbillet

Publications and source records attributed to M. Carbillet.

At least 19 recordsLinked to original sources

arXiv2026

The SPHERE infrared survey for exoplanets (SHINE) V. Full sample characterization

Unbiased surveys of large stellar samples are the prime means through which the prevalence of exoplanets can be derived, and crucial constraints to planet formation models can be set. Direct imaging (DI) is ideally positioned to probe the outer regions (5-300au) of planetary systems, providing complementary information to techniques such as transits and radial velocities. We present the full sample of the SpHere INfrared survey for Exoplanets (SHINE), the second largest DI campaign to date. SHINE observed 460 stars between 2015 and 2023 thanks to the guaranteed time observations (GTO) allocated by ESO to the SPHERE consortium at VLT. The goal of this paper is to homogeneously derive the stellar properties of the targets and to define a subsample of young single hosts to be used as a starting point for the final statistical analysis of the survey. Stellar ages were determined based on kinematic indicators (such as the membership to young moving groups), age diagnostics (lithium abundance, rotation, activity), and isochrone fitting. A thorough vetting for binarity was undertaken combining astrometric, spectroscopic, and imaging data. A subsample of 333 stars, covering a large extent of stellar ages and masses, was constructed. Selection criteria, global features, as well as the properties of individual stars are reported and discussed.

astro-ph.EP↗

arXiv2025

First Light for the GRAVITY+ Adaptive Optics: Extreme Adaptive Optics for the Very Large Telescope Interferometer

GRAVITY+ improves by orders of magnitude the sensitivity, sky-coverage and contrast of the Very Large Telescope Interferometer (VLTI). A central part of this project is the development of Gravity Plus Adaptive Optics (GPAO), a dedicated high-order and laser-guide star Adaptive Optics (AO) system for VLTI. GPAO consists of four state-of-the-art AO systems equipping all 8m-class Unit Telescopes (UTs) for the wavefront correction of the VLTI instruments. It offers both visible and infrared Natural Guide Star (NGS) and Laser Guide Star (LGS) operations. The paper presents the design, operations and performances of GPAO. We illustrate the improvement brought by GPAO with interferometric observations obtained during the commissioning of the NGS mode end-2024. These science results include the first optical interferometry observations of a redshift $z\sim4$ quasar, the spectroscopy of a cool brown-dwarf with magnitude $K\sim 21.0$, the first observations of a Class I young star with GRAVITY, and the first sub-micro arcsecond differential astrometry in the optical. Together with the entire GRAVITY+ project, the implementation of GPAO is a true paradigm shift for observing the optical Universe at very high angular resolution.

astro-ph.IM↗

arXiv2025

The mid-infrared spectrum of $\beta$ Pictoris b. First VLTI/MATISSE interferometric observations of an exoplanet

Few spectra of directly-imaged exoplanets have been obtained in the mid-infrared (> 3 $\mu$m). This region is particularly rich in molecular spectral signatures, whose measurements can help recover atmospheric parameters and provide a better understanding of giant planet formation and atmospheric dynamics. In the past years, exoplanet interferometry with the VLTI/GRAVITY instrument has provided medium-resolution spectra of a dozen substellar companions in the near infrared. The 100-meter interferometric baselines allow for the stellar and planetary signals to be efficiently disentangled at close angular separations (< 0.3''). We aim to extend this technique to the mid-infrared using MATISSE, the VLTI's mid-infrared spectro-interferometer. We take advantage of the fringe tracking and off-axis pointing capabilities recently brought by the GRA4MAT upgrade. Using this new mode, we observed the giant planet $\beta$ Pictoris b in L and M bands (2.75-5 $\mu$m) at a spectral resolution of 500. We developed a method to correct chromatic dispersion and non-common paths effects in the fringe phase and modelled the planet astrometry and stellar contamination. We obtained a high-signal-to-noise spectrum of $\beta$ Pictoris b, showing the planet continuum in L (for the first time) and M bands, which contains broad absorption features of H$_2$O and CO. In conjunction with a new GRAVITY spectrum, we modelled it with the ForMoSA nested sampling tool and the Exo-REM grid of atmospheric models, and found a solar carbon-to-oxygen ratio in the planet atmosphere. This study opens the way to the characterization of fainter and closer-in planets with MATISSE, which could complement the JWST at angular separations too close for it to obtain exoplanet spectra. Starting in 2025, the new adaptive optics system brought by the GRAVITY+ upgrade will further extend the detection limits of MATISSE.

astro-ph.EP↗

arXiv2025

The SPHERE infrared survey for exoplanets (SHINE). V. Complete observations, data reduction and analysis, detection performances, and final results

During the past decade, state-of-the-art planet-finder instruments like SPHERE@VLT, coupling coronagraphic devices and extreme adaptive optics systems, unveiled, thanks to large surveys, around 20 planetary mass companions at semi-major axis greater than 10 astronomical units. Direct imaging being the only detection technique to be able to probe this outer region of planetary systems, the SPHERE infrared survey for exoplanets (SHINE) was designed and conducted from 2015 to 2021 to study the demographics of such young gas giant planets around 400 young nearby solar-type stars. In this paper, we present the observing strategy, the data quality, and the point sources analysis of the full SHINE statistical sample as well as snapSHINE. Both surveys used the SPHERE@VLT instrument with the IRDIS dual band imager in conjunction with the integral field spectrograph IFS and the angular differential imaging observing technique. All SHINE data (650 datasets), corresponding to 400 stars, including the targets of the F150 survey, are processed in a uniform manner with an advanced post-processing algorithm called PACO ASDI. An emphasis is put on the classification and identification of the most promising candidate companions. Compared to the previous early analysis SHINE F150, the use of advanced post-processing techniques significantly improved by one or 2 magnitudes (x3-x6) the contrast detection limits, which will allow us to put even tighter constraints on the radial distribution of young gas giants. This increased sensitivity directly places SHINE as the largest and deepest direct imaging survey ever conducted. We detected and classified more than 3500 physical sources. One additional substellar companion has been confirmed during the second phase of the survey (HIP 74865 B), and several new promising candidate companions are awaiting second epoch confirmations.

astro-ph.EP↗

arXiv2024

Mid-order wavefront control for exoplanet imaging: preliminary characterization of the segmented deformable mirror and Zernike wavefront sensor on HiCAT

We study a mid-order wavefront sensor (MOWFS) to address fine cophasing errors in exoplanet imaging with future large segmented aperture space telescopes. Observing Earth analogs around Sun-like stars requires contrasts down to $10^{-10}$ in visible light. One promising solution consists of producing a high-contrast dark zone in the image of an observed star. In a space observatory, this dark region will be altered by several effects, and among them, the small misalignments of the telescope mirror segments due to fine thermo-mechanical drifts. To correct for these errors in real time, we investigate a wavefront control loop based on a MOWFS with a Zernike sensor. Such a MOWFS was installed on the high-contrast imager for complex aperture telescopes (HiCAT) testbed in Baltimore in June 2023. The bench uses a 37-segment Iris-AO deformable mirror to mimic telescope segmentation and some wavefront control strategies to produce a dark zone with such an aperture. In this contribution, we first use the MOWFS to characterize the Iris-AO segment discretization steps. For the central segment, we find a minimal step of 125 $\pm$ 31 pm. This result will help us to assess the contribution of the Iris-AO DM on the contrast in HiCAT. We then determine the detection limits of the MOWFS, estimating wavefront error amplitudes of 119 and 102 pm for 10 s and 1 min exposure time with a SNR of 3. These values inform us about the measurement capabilities of our wavefront sensor on the testbed. These preliminary results will be useful to provide insights on metrology and stability for exo-Earth observations with the Habitable Worlds Observatory.

astro-ph.IM↗

arXiv2024

Quasi-Random Frequency Sampling for Optical Turbulence Simulations

Optical turbulence modelling and simulation are crucial for developing astronomical ground-based instruments, laser communication, laser metrology, or any application where light propagates through a turbulent medium. In the context of spectrum-based optical turbulence Monte-Carlo simulations, we present an alternative approach to the methods based on the Fast Fourier Transform (FFT) using a quasi-random frequency sampling heuristic. This approach provides complete control over the spectral information expressed in the simulated measurable, without the drawbacks encountered with FFT-based methods such as high-frequency aliasing, low-frequency under-sampling, and static sampling statistics. The method's heuristics, implementation, and an application example from the study of differential piston fluctuations are discussed.

astro-ph.IM↗

arXiv2023

Low-order wavefront control using a Zernike sensor through Lyot coronagraphs for exoplanet imaging: II. Concurrent operation with stroke minimization

Wavefront sensing and control (WFSC) will play a key role in improving the stability of future large segmented space telescopes while relaxing the thermo-mechanical constraints on the observatory structure. Coupled with a coronagraph to reject the light of an observed bright star, WFSC enables the generation and stabilisation of a dark hole (DH) in the star image to perform planet observations. While WFSC traditionally relies on a single wavefront sensor (WFS) input to measure wavefront errors, the next generation of instruments will require several WFSs to address aberrations with different sets of spatial and temporal frequency contents. The multiple measurements produced in such a way will then have to be combined and converted to commands for deformable mirrors (DMs) to modify the wavefront subsequently. We asynchronously operate a loop controlling the high-order modes digging a DH and a control loop that uses the rejected light by a Lyot coronagraph with a Zernike wavefront sensor to stabilize the low-order aberrations. Using the HiCAT testbed with a segmented telescope aperture, we implement concurrent operations and quantify the expected cross-talk between the two controllers. We then present experiments that alternate high-order and low-order control loops to identify and estimate their respective contributions. We show an efficient combination of the high-order and low-order control loops, keeping a DH contrast better than 5 x 10-8 over a 30 min experiment and stability improvement by a factor of 1.5. In particular, we show a contrast gain of 1.5 at separations close to the DH inner working angle, thanks to the low-order controller contribution. Concurrently digging a DH and using the light rejected by a Lyot coronagraph to stabilize the wavefront is a promising path towards exoplanet imaging and spectroscopy with future large space observatories.

astro-ph.IM↗

arXiv2022

Low-order wavefront control using a Zernike sensor through Lyot coronagraphs for exoplanet imaging

Combining large segmented space telescopes, coronagraphy and wavefront control methods is a promising solution to produce a dark hole (DH) region in the coronagraphic image of an observed star and study planetary companions. The thermal and mechanical evolution of such a high-contrast facility leads to wavefront drifts that degrade the DH contrast during the observing time, thus limiting the ability to retrieve planetary signals. Lyot-style coronagraphs are starlight suppression systems that remove the central part of the image for an unresolved observed star, the point spread function, with an opaque focal plane mask (FPM). When implemented with a flat mirror containing an etched pinhole, the mask rejects part of the starlight through the pinhole which can be used to retrieve information about low-order aberrations. We propose an active control scheme using a Zernike wavefront sensor (ZWFS) to analyze the light rejected by the FPM, control low-order aberrations, and stabilize the DH contrast. The concept formalism is first presented before characterizing the sensor behavior in simulations and in laboratory. We then perform experimental tests to validate a wavefront control loop using a ZWFS on the HiCAT testbed. By controlling the first 11 Zernike modes, we show a decrease in wavefront error standard deviation by a factor of up to 9 between open- and closed-loop operations using the ZWFS. In the presence of wavefront perturbations, we show the ability of this control loop to stabilize a DH contrast around 7x10^-8 with a standard deviation of 7x10^-9. Active control with a ZWFS proves a promising solution in Lyot coronagraphs with an FPM-filtered beam to control and stabilize low-order wavefront aberrations and DH contrast for exoplanet imaging with future space missions.

astro-ph.IM↗

arXiv2021

The SPHERE infrared survey for exoplanets (SHINE)- I Sample definition and target characterization

Large surveys with new-generation high-contrast imaging instruments are needed to derive the frequency and properties of exoplanet populations with separations from $\sim$5 to 300 AU. A careful assessment of the stellar properties is crucial for a proper understanding of when, where, and how frequently planets form, and how they evolve. The sensitivity of detection limits to stellar age makes this a key parameter for direct imaging surveys. We describe the SpHere INfrared survey for Exoplanets (SHINE), the largest direct imaging planet-search campaign initiated at the VLT in 2015 in the context of the SPHERE Guaranteed Time Observations of the SPHERE consortium. In this first paper we present the selection and the properties of the complete sample of stars surveyed with SHINE, focusing on the targets observed during the first phase of the survey (from February 2015 to February 2017). This early sample composed of 150 stars is used to perform a preliminary statistical analysis of the SHINE data, deferred to two companion papers presenting the survey performance, main discoveries, and the preliminary statistical constraints set by SHINE. Based on a large database collecting the stellar properties of all young nearby stars in the solar vicinity (including kinematics, membership to moving groups, isochrones, lithium abundance, rotation, and activity), we selected the original sample of 800 stars that were ranked in order of priority according to their sensitivity for planet detection in direct imaging with SPHERE. The properties of the stars that are part of the early statistical sample were revisited, including for instance measurements from the GAIA Data Release 2.

astro-ph.EP↗

arXiv2021

The SPHERE infrared survey for exoplanets (SHINE) -- II. Observations, Data reduction and analysis Detection performances and early-results

Over the past decades, direct imaging has confirmed the existence of substellar companions (exoplanets or brown dwarfs) on wide orbits (>10 au) from their host stars. To understand their formation and evolution mechanisms, we have initiated in 2015 the SPHERE infrared survey for exoplanets (SHINE), a systematic direct imaging survey of young, nearby stars to explore their demographics.} {We aim to detect and characterize the population of giant planets and brown dwarfs beyond the snow line around young, nearby stars. Combined with the survey completeness, our observations offer the opportunity to constrain the statistical properties (occurrence, mass and orbital distributions, dependency on the stellar mass) of these young giant planets.} {In this study, we present the observing and data analysis strategy, the ranking process of the detected candidates, and the survey performances for a subsample of 150 stars, which are representative of the full SHINE sample. The observations were conducted in an homogeneous way from February 2015 to February 2017 with the dedicated ground-based VLT/SPHERE instrument equipped with the IFS integral field spectrograph and the IRDIS dual-band imager covering a spectral range between 0.9 and 2.3 $μ$m. We used coronographic, angular and spectral differential imaging techniques to reach the best detection performances for this study down to the planetary mass regime.}

astro-ph.EP↗

arXiv2020

The SPHERE infrared survey for exoplanets (SHINE). III. The demographics of young giant exoplanets below 300 au with SPHERE

The SHINE project is a 500-star survey performed with SPHERE on the VLT for the purpose of directly detecting new substellar companions and understanding their formation and early evolution. Here we present an initial statistical analysis for a subsample of 150 stars that are representative of the full SHINE sample. Our goal is to constrain the frequency of substellar companions with masses between 1 and 75 MJup and semimajor axes between 5 and 300 au. We adopt detection limits as a function of angular separation from the survey data for all stars converted into mass and projected orbital separation using the BEX-COND-hot evolutionary tracks and known distance to each system. Based on the results obtained for each star and on the 13 detections in the sample, we use a MCMC tool to compare our observations to two different types of models. The first is a parametric model based on observational constraints, and the second type are numerical models that combine advanced core accretion and gravitational instability planet population synthesis. Using the parametric model, we show that the frequencies of systems with at least one substellar companion are $23.0_{-9.7}^{+13.5}\%$, $5.8_{-2.8}^{+4.7}\%$, and $12.6_{-7.1}^{+12.9}\%$ for BA, FGK, and M stars, respectively. We also demonstrate that a planet-like formation pathway probably dominates the mass range from 1-75 MJup for companions around BA stars, while for M dwarfs, brown dwarf binaries dominate detections. In contrast, a combination of binary star-like and planet-like formation is required to best fit the observations for FGK stars. Using our population model and restricting our sample to FGK stars, we derive a frequency of $5.7_{-2.8}^{+3.8}\%$, consistent with predictions from the parametric model. More generally, the frequency values that we derive are in excellent agreement with values obtained in previous studies.

astro-ph.EP↗

arXiv2019

RefPlanets: Search for reflected light from extra-solar planets with SPHERE/ZIMPOL

RefPlanets is a guaranteed time observation (GTO) programme that uses the Zurich IMaging POLarimeter (ZIMPOL) of SPHERE/VLT for a blind search for exoplanets in wavelengths from 600-900 nm. The goals of this study are the characterization of the unprecedented high polarimetic contrast and polarimetric precision capabilities of ZIMPOL for bright targets, the search for polarized reflected light around some of the closest bright stars to the Sun and potentially the direct detection of an evolved cold exoplanet for the first time. For our observations of Alpha Cen A and B, Sirius A, Altair, Eps Eri and Tau Ceti we used the polarimetric differential imaging (PDI) mode of ZIMPOL which removes the speckle noise down to the photon noise limit for angular separations >0.6". We describe some of the instrumental effects that dominate the noise for smaller separations and explain how to remove these additional noise effects in post-processing. We then combine PDI with angular differential imaging (ADI) as a final layer of post-processing to further improve the contrast limits of our data at these separations. For good observing conditions we achieve polarimetric contrast limits of 15.0-16.3 mag at the effective inner working angle of about 0.13", 16.3-18.3 mag at 0.5" and 18.8-20.4 mag at 1.5". The contrast limits closer in (<0.6") depend significantly on the observing conditions, while in the photon noise dominated regime (>0.6"), the limits mainly depend on the brightness of the star and the total integration time. We compare our results with contrast limits from other surveys and review the exoplanet detection limits obtained with different detection methods. For all our targets we achieve unprecedented contrast limits. Despite the high polarimetric contrasts we are not able to find any additional companions or extended polarized light sources in the data that has been taken so far.

astro-ph.EP↗

arXiv2019

SPHERE: the exoplanet imager for the Very Large Telescope

Observations of circumstellar environments to look for the direct signal of exoplanets and the scattered light from disks has significant instrumental implications. In the past 15 years, major developments in adaptive optics, coronagraphy, optical manufacturing, wavefront sensing and data processing, together with a consistent global system analysis have enabled a new generation of high-contrast imagers and spectrographs on large ground-based telescopes with much better performance. One of the most productive is the Spectro-Polarimetic High contrast imager for Exoplanets REsearch (SPHERE) designed and built for the ESO Very Large Telescope (VLT) in Chile. SPHERE includes an extreme adaptive optics system, a highly stable common path interface, several types of coronagraphs and three science instruments. Two of them, the Integral Field Spectrograph (IFS) and the Infra-Red Dual-band Imager and Spectrograph (IRDIS), are designed to efficiently cover the near-infrared (NIR) range in a single observation for efficient young planet search. The third one, ZIMPOL, is designed for visible (VIR) polarimetric observation to look for the reflected light of exoplanets and the light scattered by debris disks. This suite of three science instruments enables to study circumstellar environments at unprecedented angular resolution both in the visible and the near-infrared. In this work, we present the complete instrument and its on-sky performance after 4 years of operations at the VLT.

astro-ph.IM↗

arXiv2019

The polarimetric imaging mode of VLT/SPHERE/IRDIS II: Characterization and correction of instrumental polarization effects

Context. Circumstellar disks and self-luminous giant exoplanets or companion brown dwarfs can be characterized through direct-imaging polarimetry at near-infrared wavelengths. SPHERE/IRDIS at the Very Large Telescope has the capabilities to perform such measurements, but uncalibrated instrumental polarization effects limit the attainable polarimetric accuracy. Aims. We aim to characterize and correct the instrumental polarization effects of the complete optical system, i.e. the telescope and SPHERE/IRDIS. Methods. We create a detailed Mueller matrix model in the broadband filters Y-, J-, H- and Ks, and calibrate it using measurements with SPHERE's internal light source and observations of two unpolarized stars. We develop a data-reduction method that uses the model to correct for the instrumental polarization effects, and apply it to observations of the circumstellar disk of T Cha. Results. The instrumental polarization is almost exclusively produced by the telescope and SPHERE's first mirror and varies with telescope altitude angle. The crosstalk primarily originates from the image derotator (K-mirror). At some orientations, the derotator causes severe loss of signal (>90% loss in H- and Ks-band) and strongly offsets the angle of linear polarization. With our correction method we reach in all filters a total polarimetric accuracy of <0.1% in the degree of linear polarization and an accuracy of a few degrees in angle of linear polarization. Conclusions. The correction method enables us to accurately measure the polarized intensity and angle of linear polarization of circumstellar disks, and is a vital tool for detecting unresolved (inner) disks and measuring the polarization of substellar companions. We have incorporated the correction method in a highly-automatic end-to-end data-reduction pipeline called IRDAP which is publicly available at https://irdap.readthedocs.io.

astro-ph.IM↗

arXiv2019

Dust production in the debris disk around HR 4796 A

Debris disks are the natural by-products of the planet formation process. Scattered or polarized light observations are mostly sensitive to small dust grains that are released from the grinding down of bigger planetesimals. High angular resolution observations at optical wavelengths can provide key constraints on the radial and azimuthal distribution of the small dust grains. These constraints can help us better understand where most of the dust grains are released upon collisions. We present SPHERE/ZIMPOL observations of the debris disk around HR 4796 A, and model the radial profiles along several azimuthal angles of the disk with a code that accounts for the effect of stellar radiation pressure. This enables us to derive an appropriate description for the radial and azimuthal distribution of the small dust grains. Even though we only model the radial profiles along (or close to) the semi-major axis of the disk, our best-fit model is not only in good agreement with our observations but also with previously published datasets (from near-IR to sub-mm wavelengths). We find that the reference radius is located at $76.4\pm0.4$ au, and the disk has an eccentricity of $0.076_{-0.010}^{+0.016}$, with the pericenter located on the front side of the disk (north of the star). We find that small dust grains must be preferentially released near the pericenter to explain the observed brightness asymmetry. Even though parent bodies spend more time near the apocenter, the brightness asymmetry implies that collisions happen more frequently near the pericenter of the disk. Our model can successfully reproduce the shape of the outer edge of the disk, without having to invoke an outer planet shepherding the debris disk. With a simple treatment of the effect of the radiation pressure, we conclude that the parent planetesimals are located in a narrow ring of about $3.6$ au in width.

astro-ph.SR↗

arXiv2018

Post conjunction detection of $β$ Pictoris b with VLT/SPHERE

With an orbital distance comparable to that of Saturn in the solar system, \bpic b is the closest (semi-major axis $\simeq$\,9\,au) exoplanet that has been imaged to orbit a star. Thus it offers unique opportunities for detailed studies of its orbital, physical, and atmospheric properties, and of disk-planet interactions. With the exception of the discovery observations in 2003 with NaCo at the Very Large Telescope (VLT), all following astrometric measurements relative to \bpic have been obtained in the southwestern part of the orbit, which severely limits the determination of the planet's orbital parameters. We aimed at further constraining \bpic b orbital properties using more data, and, in particular, data taken in the northeastern part of the orbit. We used SPHERE at the VLT to precisely monitor the orbital motion of beta \bpic b since first light of the instrument in 2014. We were able to monitor the planet until November 2016, when its angular separation became too small (125 mas, i.e., 1.6\,au) and prevented further detection. We redetected \bpic b on the northeast side of the disk at a separation of 139\,mas and a PA of 30$^{\circ}$ in September 2018. The planetary orbit is now well constrained. With a semi-major axis (sma) of $a = 9.0 \pm 0.5$ au (1 $σ$), it definitely excludes previously reported possible long orbital periods, and excludes \bpic b as the origin of photometric variations that took place in 1981. We also refine the eccentricity and inclination of the planet. From an instrumental point of view, these data demonstrate that it is possible to detect, if they exist, young massive Jupiters that orbit at less than 2 au from a star that is 20 pc away.

astro-ph.EP↗

arXiv2018

Temperature gradient in the solar photosphere. Test of a new spectroscopic method and study of its feasibility for ground-based telescopes

Context. The contribution of quiet-Sun regions to the solar irradiance variability is currently unclear. Some solar-cycle variations of the quiet-Sun physical structure, such as the temperature gradient, might affect the irradiance. The synoptic measurement of this quantity along the activity cycle would improve our understanding of long-term irradiance variations. Aims. We intend to test a method previously introduced for measuring the photospheric temperature gradient from high-resolution spectroscopic observation and to study its feasibility with ground-based instruments with and without adaptative optics. Methods. We used synthetic profiles of the FeI 630.15 nm obtained from realistic three-dimensional hydrodynamical simulations of the photospheric granulation and line radiative transfer computations under local thermodynamical equilibrium conditions. Synthetic granulation images at different levels in the line are obtained by convolution with the instrumental point spread function (PSF) under various conditions of atmospheric turbulence, with and without correction by an adaptative optics (AO) system. The PSF are obtained with the PAOLA software, and the AO performances are inspired by the system that will be operating on the Daniel K. Inouye Solar Telescope. Results. We consider two different conditions of atmospheric turbulence, with Fried parameters of 7 cm and 5 cm, respectively. We show that the degraded images lead to both a bias and a loss of precision in the temperature-gradient measurement, and that the correction with the AO system allows us to drastically improve the measurement quality. Conclusions. Long-term synoptic observations of the temperature gradient in the solar photosphere can be undertaken by implement- ing this method on ground-based solar telescopes that are equipped with an AO correction system.

astro-ph.SR↗

arXiv2018

SPHERE / ZIMPOL high resolution polarimetric imager. I. System overview, PSF parameters, coronagraphy, and polarimetry

We describe the Zurich Imaging Polarimeter (ZIMPOL), the visual focal plane subsystem of the SPHERE "VLT planet finder", which pushes the limits of current AO systems to shorter wavelengths, higher spatial resolution, and much improved polarimetric performance. We provide new benchmarks for the performance of high contrast instruments, in particular for polarimetric differential imaging. We have analyzed SPHERE/ZIMPOL point spread functions and measure the peak surface brightness, the encircled energy, and the full width half maximum (FWHM) for different wavelengths, atmospheric conditions, star brightness, and instrument modes. Coronagraphic images are described and analized and the performance for different coronagraphs is compared with tests for the binary alpha Hyi with a separation of 92 mas and a contrast of 6 mag. For the polarimetric mode we made the instrument calibrations using zero polarization and high polarization standard stars and here we give a recipe for the absolute calibration of polarimetric data. The data show a small <1 mas but disturbing differential polarimetric beam shifts, which can be explained as Goos-Hähnchen shifts from the inclined mirrors, and we discuss how to correct this effect. The polarimetric sensitivity is investigated with non-coronagraphic and deep, coronagraphic observations of the dust scattering around the symbiotic Mira variable R Aqr. SPHERE/ZIMPOL achieves imaging performances in the visual range with unprecedented characteristics, in particular very high spatial resolution and very high polarimetric contrast. This instrument opens up many new research opportunities for the detailed investigation of circumstellar dust, in scattered and therefore polarized light, for the investigation of faint companions, and for the mapping of circumstellar Halpha emission.

astro-ph.IM↗