arXiv subjects

M. Chshiev

Publications and source records attributed to M. Chshiev.

At least 19 recordsLinked to original sources

arXiv2025

Monolayer control of spin-charge conversion in van der Waals heterostructures

The diversity of 2D materials and their van der Waals (vdW) stacking presents a fertile ground for engineering novel multifunctional materials and quantum states of matter. This permits unique opportunities to tailor the electronic properties of vdW heterostructures by the insertion of only a single 2D material layer. However, such vdW materials engineering at the atomic scale has yet to be investigated for spin-charge interconversion phenomena. Here, we report on the control of these effects at the monolayer level, where drastic increase in intensity and change in sign of THz spintronic emission are demonstrated by inserting a single layer of MoSe$_2$ between PtSe$_2$ and graphene in a fully epitaxial, large area stacked structure. By using a combination of spin and angle resolved photoemission and density functional theory to reveal the electronic and spin structures, we illustrate two different mechanisms relying on charge transfer and electronic hybridization for the formation of Rashba states, which are responsible for spin-charge conversion and hence the THz spintronic emission. These findings open new pathways to design, at the atomic scale, efficient THz spintronic emitters made of 2D materials and other spintronic devices based on spin-charge interconversion phenomena.

cond-mat.mtrl-sci↗

arXiv2023

Angular dependence of the interlayer coupling at the interface between two dimensional materials 1T-PtSe$_2$ and graphene

We present a study by Scanning Tunneling Microscopy, supported by ab initio calculations, of the interaction between graphene and monolayer (semiconducting) PtSe$_2$ as a function of the twist angle ${\theta}$ between the two layers. We analyze the PtSe$_2$ contribution to the hybrid interface states that develop within the bandgap of the semiconductor to probe the interaction. The experimental data indicate that the interlayer coupling increases markedly with the value of ${\theta}$, which is confirmed by ab initio calculations. The moir\'e patterns observed within the gap are consistent with a momentum conservation rule between hybridized states, and the strength of the hybridization can be qualitatively described by a perturbative model.

cond-mat.mes-hall↗

arXiv2023

Atomic-layer controlled THz Spintronic emission from Epitaxially grown Two dimensional PtSe$_2$/ferromagnet heterostructures

Terahertz (THz) Spintronic emitters based on ferromagnetic/metal junctions have become an important technology for the THz range, offering powerful and ultra-large spectral bandwidths. These developments have driven recent investigations of two-dimensional (2D) materials for new THz spintronic concepts. 2D materials, such as transition metal dichalcogenides (TMDs), are ideal platforms for SCC as they possess strong spin-orbit coupling (SOC) and reduced crystal symmetries. Moreover, SCC and the resulting THz emission can be tuned with the number of layers, electric field or strain. Here, epitaxially grown 1T-PtSe$_2$ and sputtered Ferromagnet (FM) heterostructures are presented as a novel THz emitter where the 1T crystal symmetry and strong SOC favor SCC. High quality of as-grown PtSe$_2$ layers is demonstrated and further FM deposition leaves the PtSe$_2$ unaffected, as evidenced with extensive characterization. Through this atomic growth control, the unique thickness dependent electronic structure of PtSe$_2$ allows the control of the THz emission by SCC. Indeed, we demonstrate the transition from the inverse Rashba-Edelstein effect in one monolayer to the inverse spin Hall effect in multilayers. This band structure flexibility makes PtSe$_2$ an ideal candidate as a THz spintronic 2D material and to explore the underlying mechanisms and engineering of the SCC for THz emission.

cond-mat.mtrl-sci↗

arXiv2021

Coexistence of ferromagnetism and spin-orbit coupling by incorporation of platinum in two-dimensional VSe$_2$

We report on a novel material, namely two-dimensional (2D) V$_{1-x}$Pt$_x$Se$_2$ alloy, exhibiting simultaneously ferromagnetic order and Rashba spin-orbit coupling. While ferromagnetism is absent in 1T-VSe$_2$ due to the competition with the charge density wave phase, we demonstrate theoretically and experimentally that the substitution of vanadium by platinum in VSe$_2$ (10-50 %) to form an homogeneous 2D alloy restores ferromagnetic order with Curie temperatures of 6 K for 5 monolayers and 25 K for one monolayer of V$_{0.65}$Pt$_{0.35}$Se$_2$. Moreover, the presence of platinum atoms gives rise to Rashba spin-orbit coupling in (V,Pt)Se$_2$ providing an original platform to study the interplay between ferromagnetism and spin-orbit coupling in the 2D limit.

cond-mat.mtrl-sci↗

arXiv2019

Spin-orbitronics at a topological insulator-semiconductor interface

Topological insulators (TIs) hold great promises for new spin-related phenomena and applications thanks to the spin texture of their surface states. However, a versatile platform allowing for the exploitation of these assets is still lacking due to the difficult integration of these materials with the mainstream Si-based technology. Here, we exploit germanium as a substrate for the growth of Bi$_2$Se$_3$, a prototypical TI. We probe the spin properties of the Bi$_2$Se$_3$/Ge pristine interface by investigating the spin-to-charge conversion taking place in the interface states by means of a non-local detection method. The spin population is generated by optical orientation in Ge, and diffuses towards the Bi$_2$Se$_3$ which acts as a spin detector. We compare the spin-to-charge conversion in Bi$_2$Se$_3$/Ge with the one taking place in Pt in the same experimental conditions. Notably, the sign of the spin-to-charge conversion given by the TI detector is reversed compared to the Pt one, while the efficiency is comparable. By exploiting first-principles calculations, we ascribe the sign reversal to the hybridization of the topological surface states of Bi$_2$Se$_3$ with the Ge bands. These results pave the way for the implementation of highly efficient spin detection in TI-based architectures compatible with semiconductor-based platforms.

cond-mat.mes-hall↗

arXiv2019

Self-induced inverse spin Hall effect in ferromagnets: demonstration through non-monotonous temperature-dependence in permalloy

We investigated the self-induced inverse spin Hall effect in ferromagnets. Temperature (T), thickness (t) and angular-dependent measurements of transverse voltage in spin pumping experiments were performed with permalloy films. Results revealed non-monotonous T-dependence of the self-induced transverse voltage. Qualitative agreement was found with first-principle calculations unravelling the skew scattering, side-jump, and intrinsic contributions to the T-dependent spin Hall conductivity. Experimental data were similar whatever the material in contact with permalloy (oxides or metals), and revealed an increase of produced current with t, demonstrating a bulk origin of the effect.

cond-mat.mes-hall↗

arXiv2019

Proximity magnetoresistance in graphene induced by magnetic insulators

We demonstrate the existence of Giant proximity magnetoresistance (PMR) effect in a graphene spin valve where spin polarization is induced by a nearby magnetic insulator. PMR calculations were performed for yttrium iron garnet (YIG), cobalt ferrite (CFO), and two europium chalcogenides EuO and EuS. We find a significant PMR (up to 100%) values defined as a relative change of graphene conductance with respect to parallel and antiparallel alignment of two proximity induced magnetic regions within graphene. Namely, for high Curie temperature (Tc) CFO and YIG insulators which are particularly important for applications, we obtain 22% and 77% at room temperature, respectively. For low Tc chalcogenides, EuO and EuS, the PMR is 100% in both cases. Furthermore, the PMR is robust with respect to system dimensions and edge type termination. Our findings show that it is possible to induce spin polarized currents in graphene with no direct injection through magnetic materials.

cond-mat.mes-hall↗

arXiv2018

Giant variation of the perpendicular magnetic anisotropy at Fe/MgO interfaces by oxygen migration: a first-principles study

A characteristic dependence of voltage control of perpendicular magnetic anisotropy (VCMA) on oxygen migration at Fe/MgO interfaces was revealed by performing systematic {\it ab initio} study of the energetics of the oxygen path around the interface. We find that the surface anisotropy energy exhibits a Boltzmann sigmoidal behavior as a function of the migrated O-atoms concentration. The obtained variation of the VCMA efficiency factor $β$ reveals a saturation limit beyond a critical concentration of migrated O, about $54\%$, at which the anisotropy switches from perpendicular to in plane. Furthermore, depending on the range of variation of the applied voltage, two regimes associated with reversible or irreversible ions displacement are predicted to occur, yielding different VCMA response. According to our findings, one can distinguish from the order of magnitude of $β$ the VCMA driving mechanism: an effect of several tens of fJ/(V.m) is likely associated to charge-mediated effect combined with slight reversible oxygen displacements whereas an effect of the order of thousands of fJ/(V.m) is more likely associated with irreversible oxygen ionic migration.

cond-mat.mtrl-sci↗

arXiv2018

Intrinsic spin orbit torque in a single domain nanomagnet

We present theoretical studies of the intrinsic spin orbit torque (SOT) in a single domain ferromagnetic layer with Rashba spin-orbit coupling (SOC) using the non-equilibrium Green's function formalism for a model Hamiltonian. We find that, to the first order in SOC, the intrinsic SOT has only the field-like torque symmetry and can be interpreted as the longitudinal spin current induced by the charge current and Rashba field. We analyze the results in terms of the material related parameters of the electronic structure, such as band filling, band width, exchange splitting, as well as the Rashba SOC strength. On the basis of these numerical and analytical results, we discuss the magnitude and sign of SOT. Our results show that the different sign of SOT in identical ferromagnetic layers with different supporting layers, e.g. Co/Pt and Co/Ta, could be attributed to electrostatic doping of the ferromagnetic layer by the support.

cond-mat.mes-hall↗

arXiv2017

Spin Hall and spin swapping torques in diffusive ferromagnets

A complete set of the generalized drift-diffusion equations for a coupled charge and spin dynamics in ferromagnets in the presence of extrinsic spin-orbit coupling is derived from the quantum kinetic approach, covering major transport phenomena, such as the spin and anomalous Hall effects, spin swapping, spin precession and relaxation processes. We argue that the spin swapping effect in ferromagnets is enhanced due to spin polarization, while the overall spin texture induced by the interplay of spin-orbital and spin precessional effects displays a complex spatial dependence that can be exploited to generate torques and nucleate/propagate domain walls in centrosymmetric geometries without use of external polarizers, as opposed to the conventional understanding of spin-orbit mediated torques.

cond-mat.mes-hall↗

arXiv2017

Large enhancement of the spin Hall effect in Au by scattering with side-jump on Ta impurities

We present measurements of the Spin Hall Effect (SHE) in AuW and AuTa alloys for a large range of W or Ta concentrations by combining experiments on lateral spin valves and Ferromagnetic-Resonance/spin pumping technique. The main result is the identification of a large enhancement of the Spin Hall Angle (SHA) by the side-jump mechanism on Ta impurities, with a SHA as high as + 0.5 (i.e $50\%$) for about 10\% of Ta. In contrast the SHA in AuW does not exceed + 0.15 and can be explained by intrinsic SHE of the alloy without significant extrinsic contribution from skew or side-jump scattering by W impurities. The AuTa alloys, as they combine a very large SHA with a moderate resistivity (smaller than $85\,μΩ.cm$), are promising for spintronic devices exploiting the SHE.

cond-mat.mtrl-sci↗

arXiv2016

Tailoring magnetic insulator proximity effects in graphene: First-principles calculations

We report a systematic first-principles investigation of the influence of different magnetic insulators on the magnetic proximity effect induced in graphene. Four different magnetic insulators are considered: two ferromagnetic europium chalcogenides namely EuO and EuS and two ferrimagnetic insulators yttrium iron garnet (YIG) and cobalt ferrite (CFO). The obtained exchange-splitting varies from tens to hundreds of meV. We also find an electron doping induced by YIG and europium chalcogenides substrates, that shift the Fermi level up to 0.78 eV and 1.3 eV respectively, whereas hole doping up to 0.5 eV is generated by CFO. Furthermore, we study the variation of the extracted exchange and tight binding parameters as a function of the EuO and EuS thicknesses. We show that those parameters are robust to thickness variation such that a single monolayer of magnetic insulator can induce a large magnetic proximity effect on graphene. Those findings pave the way towards possible engineering of graphene spin-gating by proximity effect especially in view of recent experiments advancement.

cond-mat.mtrl-sci↗

arXiv2016

Second order anisotropy contribution in perpendicular magnetic tunnel junctions

Magnetoresistance loops under in-plane applied field were measured on perpendicularly magnetized magnetic tunnel junction (pMTJ) pillars with nominal diameters ranging from 50 to 150 nm. By fitting the hard-axis magnetoresistance loops to an analytical model, the effective anisotropy fields in both free and reference layers were derived and their variations in temperature range between 340K and 5K were determined. It is found that an accurate fitting is possible only if a second-order anisotropy term of the form $-K_{2}cos^4θ$, is added to the fitting model. This higher order contribution exists both in the free and reference layers and its sign is opposite to that of the first order anisotropy constant, $K_{1}$. At room temperatures the estimated $-K_{2}/K_{1}$ ratios are 0.1 and 0.24 for the free and reference layers, respectively. The ratio is more than doubled at low temperatures altering the ground state of the reference layer from 'easy-axis' to 'easy-cone' regime. Easy-cone state has clear signatures in the shape of the hard-axis magnetoresistance loops. The same behavior was observed in all measured devices regardless of their diameter. The existence of this higher order anisotropy was confirmed experimentally on FeCoB/MgO sheet films by ferromagnetic resonance technique. It is of interfacial nature and is believed to be linked to spatial fluctuations at the nanoscale of the anisotropy parameter at the FeCoB/MgO interface, in agreement with Dieny-Vedyayev model.

cond-mat.mes-hall↗

arXiv2015

Analytical description of ballistic spin currents and torques in magnetic tunnel junctions

In this work we demonstrate explicit analytical expressions for both charge and spin currents which constitute the 2x2 spinor in magnetic tunnel junctions with noncollinear magnetizations under applied voltage. The calculations have been performed within the free electron model in the framework of the Keldysh formalism and WKB approximation. We demonstrate that spin/charge currents and spin transfer torques are all explicitly expressed through only three irreducible quantities, without further approximations. The conditions and mechanisms of deviation from the conventional sine angular dependence of both spin currents and torques are shown and discussed. It is shown in the thick barrier approximation that all tunneling transport quantities can be expressed in an extremely simplified form via Slonczewski spin polarizations and our effective spin averaged interfacial transmission probabilities and effective out-of-plane polarizations at both interfaces. It is proven that the latter plays a key role in the emergence of perpendicular spin torque as well as in the angular dependence character of all spin and charge transport considered. It is demonstrated directly also that for any applied voltage, the parallel component of spin current at the FM/I interface is expressed via collinear longitudinal spin current components. Finally, spin transfer torque behavior is analyzed in a view of transverse characteristic length scales for spin transport.

cond-mat.mes-hall↗

arXiv2015

Long range phase coherencein double barrier magnetic tunnel junctions with large thick metallic quantum well

Double barrier heterostructures are model systems for the study of electron tunneling and discrete energy levels in a quantum well (QW). Until now resonant tunneling phenomena in metallicQW have been observed for limited thicknesses (1-2 nm) under which electron phase coherence is conserved. In the present study we show evidence of QW resonance states in Fe QW up to12 nmthick and at room temperature in fully epitaxial doubleMgAlOxbarrier magnetic tunnel junctions. The electron phase coherence displayed in this QWis of unprecedented quality because ofa homogenous interface phase shift due to the small lattice mismatch at the Fe/MgAlOx interface. The physical understanding of the critical role of interface strain on QW phase coherence will greatly promote the development of the spin-dependent quantum resonant tunneling applications.

cond-mat.mes-hall↗

arXiv2015

Respective influence of in-plane and out-of-plane spin-transfer torques in magnetization switching of perpendicular magnetic tunnel junctions

The relative contributions of in-plane (damping-like) and out-of-plane (field-like) spin-transfer-torques in the magnetization switching of out-of-plane magnetized magnetic tunnel junctions (pMTJ) has been theoretically analyzed using the transformed Landau-Lifshitz (LL) equation with the STT terms. It is demonstrated that in a pMTJ structure obeying macrospin dynamics, the out-of-plane torque influences the precession frequency but it does not contribute significantly to the STT switching process (in particular to the switching time and switching current density), which is mostly determined by the in-plane STT contribution. This conclusion is confirmed by finite temperature and finite writing pulse macrospin simulations of the current-field switching diagrams. It contrasts with the case of STT-switching in in-plane magnetized MTJ in which the field-like term also influences the switching critical current. This theoretical analysis was successfully applied to the interpretation of voltage-field STT switching diagrams experimentally measured on perpendicular MTJ pillars 36 nm in diameter, which exhibit macrospin-like behavior. The physical nonequivalence of Landau and Gilbert dissipation terms in presence of STT-induced dynamics is also discussed.

cond-mat.mes-hall↗

arXiv2014

Large and robust electrical spin injection into GaAs at zero magnetic field using an ultrathin CoFeB/MgO injector

We demonstrate a large electrical spin injection into GaAs at zero magnetic field thanks to an ultrathin perpendicularly magnetized CoFeB contact of a few atomic planes (1.2 nm). The spin-polarization of electrons injected into GaAs was examined by the circular polarization of electroluminescence from a Spin Light Emitting Diode with embedded InGaAs/GaAs quantum wells. The electroluminescence polarization as a function of the magnetic field closely traces the out-of-plane magnetization of the CoFeB/MgO injector. A circular polarization degree of the emitted light as large as 20% at 25 K is achieved at zero magnetic field. Moreover the electroluminescence circular polarization is still about 8% at room temperature.

cond-mat.mtrl-sci↗

arXiv2014

Impurity induced enhancement of perpendicular magnetic anisotropy in Fe/MgO tunnel junctions

Using first-principles calculations, we investigated the impact of chromium (Cr) and vanadium (V) impurities on the magnetic anisotropy and spin polarization in Fe/MgO magnetic tunnel junctions. It is demonstrated using layer resolved anisotropy calculation technique, that while the impurity near the interface has a drastic effect in decreasing the perpendicular magnetic anisotropy (PMA), its position within the bulk allows maintaining high surface PMA. Moreover, the effective magnetic anisotropy has a strong tendency to go from in-plane to out-of-plane character as a function of Cr and V concentration favoring out-of-plane magnetization direction for ~1.5 nm thick Fe layers at impurity concentrations above 20 %. At the same time, spin polarization is not affected and even enhanced in most situations favoring an increase of tunnel magnetoresistance (TMR) values.

cond-mat.mtrl-sci↗