arXiv subjects

M. D. Nielsen

Publications and source records attributed to M. D. Nielsen.

10 recordsLinked to original sources

arXiv2004

Predicting macrobending loss for large-mode area photonic crystal fibers

We report on an easy-to-evaluate expression for the prediction of the bend-loss for a large mode area photonic crystal fiber (PCF) with a triangular air-hole lattice. The expression is based on a recently proposed formulation of the V-parameter for a PCF and contains no free parameters. The validity of the expression is verified experimentally for varying fiber parameters as well as bend radius. The typical deviation between the position of the measured and the predicted bend loss edge is within measurement uncertainty.

physics.optics↗

arXiv2004

Low-loss photonic crystal fibers for transmission systems and their dispersion properties

We report on a single-mode photonic crystal fiber with attenuation and effective area at 1550 nm of 0.48 dB/km and 130 square-micron, respectively. This is, to our knowledge, the lowest loss reported for a PCF not made from VAD prepared silica and at the same time the largest effective area for a low-loss (< 1 dB/km) PCF. We briefly discuss the future applications of PCFs for data transmission and show for the first time, both numerically and experimentally, how the group velocity dispersion is related to the mode field diameter

physics.optics↗

arXiv2004

Polarization maintaining large mode area photonic crystal fiber

We report on a polarization maintaining large mode area photonic crystal fiber. Unlike, previous work on polarization maintaining photonic crystal fibers, birefringence is introduced using stress applying parts. This has allowed us to realize fibers, which are both single mode at any wavelength and have a practically constant birefringence for any wavelength. The fibers presented in this work have mode field diameters from about 4 to 6.5 micron, and exhibit a typical birefringence of 1.5e-4.

physics.optics↗

arXiv2004

Photonic crystal fiber with a hybrid honeycomb cladding

We consider an air-silica honeycomb lattice and demonstrate a new approach to the formation of a core defect. Typically, a high or low-index core is formed by adding a high-index region or an additional air-hole (or other low-index material) to the lattice, but here we discuss how a core defect can be formed by manipulating the cladding region rather than the core region itself. Germanium-doping of the honeycomb lattice has recently been suggested for the formation of a photonic band-gap guiding silica-core and here we experimentally demonstrate how an index-guiding silica-core can be formed by fluorine-doping of the honeycomb lattice.

physics.optics↗

arXiv2004

Bandwidth comparison of photonic crystal fibers and conventional single-mode fibers

We experimentally compare the optical bandwidth of a conventional single-mode fiber (SMF) with 3 different photonic crystal fibers (PCF) all optimized for visible applications. The spectral attenuation, single-turn bend loss, and mode-field diameters (MFD) are measured and the PCF is found to have a significantly larger bandwidth than the SMF for an identical MFD. It is shown how this advantage can be utilized for realizing a larger MFD for the PCF while maintaining a bending resistant fiber.

physics.optics↗

arXiv2003

Small-core photonic crystal fibers with weakly disordered air-hole claddings

Motivated by recent experimental work by Folkenberg et al. we consider the effect of weak disorder in the air-hole lattice of small-core photonic crystal fibers. We find that the broken symmetry leads to higher-order modes which have generic intensity distributions resembling those found in standard fibers with elliptical cores. This explains why recently reported experimental higher-order mode profiles appear very different from those calculated numerically for ideal photonic crystal fibers with inversion and six-fold rotational symmetry. The splitting of the four higher-order modes into two groups fully correlates with the observation that these modes have different cut-offs.

physics.optics↗

arXiv2003

Mode-Field Radius of Photonic Crystal Fibers Expressed by the V-parameter

We numerically calculate the equivalent mode-field radius of the fundamental mode in a photonic crystal fiber (PCF) and show that this is a function of the V-parameter only and not the relative hole size. This dependency is similar to what is found for graded-index standard fibers and we furthermore show that the relation for the PCF can be excellently approximated with the same general mathematical expression. This is to our knowledge the first semi-analytical description of the mode-field radius of a PCF.

physics.optics↗

arXiv2003

Modal cut-off and the V-parameter in photonic crystal fibers

We address the long-standing unresolved problem concerning the V-parameter in a photonic crystal fiber (PCF). Formulate the parameter appropriate for a core-defect in a periodic structure we argue that the multi-mode cut-off occurs at a wavelength lambda* which satisfies V_PCF(lambda*)=pi. Comparing to numerics and recent cut-off calculations we confirm this result.

physics.optics↗

arXiv2003

Reduced micro-deformation attenuation in large-mode area photonic crystal fibers for visible applications

We consider large-mode area photonic crystal fibers for visible applications where micro-deformation induced attenuation becomes a potential problem when the effective area A_eff is sufficiently large compared to lambda^2. We argue how a slight increase in fiber diameter D can be used in screening the high-frequency components of the micro-deformation spectrum mechanically and we confirm this experimentally for both 15 and 20 micron core fibers. For typical bending-radii (R~16 cm) the operating band-width increases by ~3-400 nm to the low-wavelength side.

physics.optics↗

arXiv2002

Improved large-mode area endlessly single-mode photonic crystal fibers

We numerically study the possibilities for improved large-mode area endlessly single mode photonic crystal fibers for use in high-power delivery applications. By carefully choosing the optimal hole diameter we find that a triangular core formed by three missing neighboring air holes considerably improves the mode area and loss properties compared to the case with a core formed by one missing air hole. In a realized fiber we demonstrate an enhancement of the mode area by ~30 % without a corresponding increase in the attenuation.

physics.optics↗