Searcharxiv⌕ Search

arXiv subjects

M. D. Stiles

Publications and source records attributed to M. D. Stiles.

50 records · Page 3Linked to original sources

Ballistic vs Diffusive Transport in Current-Induced Magnetization Switching

We test whether current-induced magnetization switching due to spin-transfer-torque in ferromagnetic/non-magnetic/ferromagnetic (F/N/F) trilayers changes significantly when scattering within the N-metal layers is changed from ballistic to diffusive. Here ballistic corresponds to a ratio r = lambda/t greater than or equal to 3 for a Cu spacer layer, and diffusive to r = lambda/t less than or equal to 0.4 for a CuGe alloy spacer layer, where lambda is the mean-free-path in the N-layer of fixed thickness t = 10 nm. The average switching currents for the alloy spacer layer are only modestly larger than those for Cu. The best available model predicts a much greater sensitivity of the switching currents to diffuse scattering in the spacer layer than we see.

cond-mat.mtrl-sci↗

Imaging the interface of epitaxial graphene with silicon carbide via scanning tunneling microscopy

Graphene grown epitaxially on SiC has been proposed as a material for carbon-based electronics. Understanding the interface between graphene and the SiC substrate will be important for future applications. We report the ability to image the interface structure beneath single-layer graphene using scanning tunneling microscopy. Such imaging is possible because the graphene appears transparent at energies of 1 eV above or below the Fermi energy. Our analysis of calculations based on density functional theory shows how this transparency arises from the electronic structure of a graphene layer on a SiC substrate.

cond-mat.mtrl-sci↗

Adiabatic Domain Wall Motion and Landau-Lifshitz Damping

Recent theory and measurements of the velocity of current-driven domain walls in magnetic nanowires have re-opened the unresolved question of whether Landau-Lifshitz damping or Gilbert damping provides the more natural description of dissipative magnetization dynamics. In this paper, we argue that (as in the past) experiment cannot distinguish the two, but that Landau-Lifshitz damping nevertheless provides the most physically sensible interpretation of the equation of motion. From this perspective, (i) adiabatic spin-transfer torque dominates the dynamics with small corrections from non-adiabatic effects; (ii) the damping always decreases the magnetic free energy, and (iii) microscopic calculations of damping become consistent with general statistical and thermodynamic considerations.

cond-mat.mtrl-sci↗

Identification of the dominant precession damping mechanism in Fe, Co, and Ni by first-principles calculations

The Landau-Lifshitz equation reliably describes magnetization dynamics using a phenomenological treatment of damping. This paper presents first-principles calculations of the damping parameters for Fe, Co, and Ni that quantitatively agree with existing ferromagnetic resonance measurements. This agreement establishes the dominant damping mechanism for these systems and takes a significant step toward predicting and tailoring the damping constants of new materials.

cond-mat.str-el↗

A numerical method to solve the Boltzmann equation for a spin valve

We present a numerical algorithm to solve the Boltzmann equation for the electron distribution function in magnetic multilayer heterostructures with non-collinear magnetizations. The solution is based on a scattering matrix formalism for layers that are translationally invariant in plane so that properties only vary perpendicular to the planes. Physical quantities like spin density, spin current, and spin-transfer torque are calculated directly from the distribution function. We illustrate our solution method with a systematic study of the spin-transfer torque in a spin valve as a function of its geometry. The results agree with a hybrid circuit theory developed by Slonczewski for geometries typical of those measured experimentally.

cond-mat.mes-hall↗

Spin Transfer Torque for Continuously Variable Magnetization

We report quantum and semi-classical calculations of spin current and spin-transfer torque in a free-electron Stoner model for systems where the magnetization varies continuously in one dimension.Analytic results are obtained for an infinite spin spiral and numerical results are obtained for realistic domain wall profiles. The adiabatic limit describes conduction electron spins that follow the sum of the exchange field and an effective, velocity-dependent field produced by the gradient of the magnetization in the wall. Non-adiabatic effects arise for short domain walls but their magnitude decreases exponentially as the wall width increases. Our results cast doubt on the existence of a recently proposed non-adiabatic contribution to the spin-transfer torque due to spin flip scattering.

cond-mat.mtrl-sci↗

Macrospin Models of Spin Transfer Dynamics

The current-induced magnetization dynamics of a spin valve are studied using a macrospin (single domain) approximation and numerical solutions of a generalized Landau-Lifshitz-Gilbert equation. For the purpose of quantitative comparison with experiment [Kiselev {\it et al.} Nature {\bf 425}, 380 (2003)], we calculate the resistance and microwave power as a function of current and external field including the effects of anisotropies, damping, spin-transfer torque, thermal fluctuations, spin-pumping, and incomplete absorption of transverse spin current. While many features of experiment appear in the simulations, there are two significant discrepancies: the current dependence of the precession frequency and the presence/absence of a microwave quiet magnetic phase with a distinct magnetoresistance signature. Comparison is made with micromagnetic simulations designed to model the same experiment.

cond-mat.mes-hall↗

Boltzmann Test of Slonczewski's Theory of Spin Transfer Torque

We use a matrix Boltzmann equation formalism to test the accuracy of Slonczewski's theory of spin-transfer torque in thin-film heterostructures where a non-magnetic spacer layer separates two non-collinear ferromagnetic layers connected to non-magnetic leads. When applicable, the model predictions for the torque as a function of the angle between the two ferromagnets agree extremely well with the torques computed from a Boltzmann equation calculation. We focus on asymmetric structures (where the two ferromagnets and two leads are not identical) where the agreement pertains to a new analytic formula for the torque derived by us using Slonczewski's theory. In almost all cases, we can predict the correct value of the model parameters directly from the geometric and transport properties of the multilayer. For some asymmetric geometries, we predict a new mode of stable precession that does not occur for the symmetric case studied by Slonczewski.

cond-mat.mtrl-sci↗

Theory of Current-Induced Magnetization Precession

We solve appropriate drift-diffusion and Landau-Lifshitz-Gilbert equations to demonstrate that unpolarized current flow from a non-magnet into a ferromagnet can produce a precession-type instability of the magnetization. The fundamental origin of the instability is the difference in conductivity between majority spins and minority spins in the ferromagnet. This leads to spin accumulation and spin currents that carry angular momentum across the interface. The component of this angular momentum perpendicular to the magnetization drives precessional motion that is opposed by Gilbert damping. Neglecting magnetic anisotropy and magnetostatics, our approximate analytic and exact numerical solutions using realistic values for the material parameters show (for both semi-infinite and thin film geometries) that a linear instability occurs when both the current density and the excitation wave vector parallel to the interface are neither too small nor too large. For many aspects of the problem, the variation of the magnetization in the direction of the current flows makes an important contribution.

cond-mat.mtrl-sci↗

Spin Nomenclature for Semiconductors and Magnetic Metals

The different conventions used in the semiconductor and magnetic metals communities can cause confusion in the context of spin polarization and transport in simple heterostructures. In semiconductors, terminology is based on the orientation of the electron spin, while in magnetic metals it is based on the orientation of the moment. In the rapidly expanding field of spintronics, where both semiconductors and metallic metals are important, some commonly used terms ("spin-up," "majority spin") can have different meanings. Here, we clarify nomenclature relevant to spin transport and optical polarization by relating the common physical observables and "definitions" of spin polarization to the fundamental concept of conservation of angular momentum within a well-defined reference frame.

cond-mat↗

Anatomy of Spin-Transfer Torque

Spin-transfer torques occur in magnetic heterostructures because the transverse component of a spin current that flows from a non-magnet into a ferromagnet is absorbed at the interface. We demonstrate this fact explicitly using free electron models and first principles electronic structure calculations for real material interfaces. Three distinct processes contribute to the absorption: (1) spin-dependent reflection and transmission; (2) rotation of reflected and transmitted spins; and (3) spatial precession of spins in the ferromagnet. When summed over all Fermi surface electrons, these processes reduce the transverse component of the transmitted and reflected spin currents to nearly zero for most systems of interest. Therefore, to a good approximation, the torque on the magnetization is proportional to the transverse piece of the incoming spin current.

cond-mat.mtrl-sci↗

Non-collinear spin transfer in Co/Cu/Co multilayers

This paper has two parts. The first part uses a single point of view to discuss the reflection and averaging mechanisms of spin-transfer between current-carrying electrons and the ferromagnetic layers of magnetic/non-magnetic heterostructures. The second part incorporates both effects into a matrix Boltzmann equation and reports numerical results for current polarization, spin accumulation, magnetoresistance, and spin-transfer torques for Co/Cu/Co multilayers. When possible, the results are compared quantitatively with relevant experiments.

cond-mat.mtrl-sci↗

Thickness evolution of coercivity in ultrathin magnetic films

The thickness evolution of in-plane magnetization reversal in ultrathin films is studied with a theoretical model that takes account of surface roughness typical of epitaxial growth. Guided by Néel's model, step edge sites of monolayer-height islands are assigned a two-fold anisotropy in addition to a four-fold anisotropy at all sites. Coercivity is found to depend essentially on both the film thickness and the partial coverage of the topmost layer. Its qualitative features are determined primarily by sample geometry and the size of the step anisotropy compared to the domain wall energy. Magnetostatic interactions change the results quantitatively, but not qualitatively. Their effect is understood by comparing calculations with and without their inclusion.

cond-mat.mtrl-sci↗

Magnetic Reversal on Vicinal Surfaces

We present a theoretical study of in-plane magnetization reversal for vicinal ultrathin films using a one-dimensional micromagnetic model with nearest-neighbor exchange, four-fold anisotropy at all sites, and two-fold anisotropy at step edges. A detailed "phase diagram" is presented that catalogs the possible shapes of hysteresis loops and reversal mechanisms as a function of step anisotropy strength and vicinal terrace length. The steps generically nucleate magnetization reversal and pin the motion of domain walls. No sharp transition separates the cases of reversal by coherent rotation and reversal by depinning of a ninety degree domain wall from the steps. Comparison to experiment is made when appropriate.

cond-mat.mtrl-sci↗