arXiv subjects

M. Engel

Publications and source records attributed to M. Engel.

11 recordsLinked to original sources

arXiv2026

The Large Array Survey Telescope-Pipeline. II. Image Subtraction and Transient Detection

Context. The Large Array Survey Telescope (LAST) is a wide-field visual-band survey designed to explore the variable and transient sky with high cadence. Its raw data stream is automatically processed in near real time at the observatory site, producing science-quality images, catalogs, and transient alerts. Transient alerts are then reported to the Transient Name Server (TNS). Aims. The LAST pipeline comprises two major components: (i) processing and calibration of single images followed by coaddition of $20\times20$s exposures, producing single-image and coadded-image catalogs; and (ii) subtraction of coadded images from calibrated reference images followed by transient detection. In this work we present a detailed description and validation of the second component of the pipeline. Methods. Transient detection is based on the algorithm for proper image subtraction (ZOGY). We combine ZOGY subtraction with the Translient statistic for sub-pixel motion discrimination, together with a sequence of deterministic filtering steps, to produce a clean stream of transient candidates without the use of machine learning. Results. Using commissioning data, the pipeline achieves a preliminary $5\sigma$ limiting magnitude of $20.3$-$20.7$mag, a single-epoch transient detection efficiency of $\sim80$%, and a purity of $\gtrsim90$% at signal-to-noise ratio of $\geq7.5\sigma$.

astro-ph.IM↗

arXiv2024

Accurate photometric calibration by fitting the system transmission

Transforming the instrumental photometry of ground-based telescopes into a calibrated physical flux in a well-defined passband is a major challenge in astronomy. Along with the intrinsic instrumental difference between telescopes sharing the same filter, the effective transmission is continuously modified by the effects of the variable atmosphere of the Earth. We have developed a new approach to the absolute photometric calibration that simultaneously treats instrumental and atmospheric effects on an image-by-image basis by fitting the system transmission. This approach aims at breaking the 1% absolute photometric accuracy which limits current calibration methods for ground-based observatories. We fit the transmission, as a function of wavelength, for each image. The fit is done by comparing the instrumental fluxes of stars in the image to the synthetic photometry of the stars given their spectrum and the transmission function which have free parameters. A key element that enables this approach is the set of about 220 million low-resolution spectra measured by Gaia, which provides a large number of stellar calibrators in the image. We demonstrate the method using data from the Large Array Survey Telescope (LAST). We show that the residuals between observations and synthetic photometry of the Gaia spectra in the fitted transmission have a standard deviation $<$1% on an image-by-image basis, with no spatial and color dependencies. The median accuracy of the zero-point throughout the image is between 3-5 mmag, depending on the total image exposure. Furthermore we show that this method provides high stability over long temporal scales.

astro-ph.IM↗

arXiv2024

Asteroid collisions: expected visibility and rate

Asteroid collisions are one of the main processes responsible for the evolution of bodies in the main belt. Using observations of the Dimorphos impact by the DART spacecraft, we estimate how asteroid collisions in the main belt may look in the first hours after the impact. If the DART event is representative of asteroid collisions with a ~1m size impactor, then the light curves of these collisions will rise on time scales of about >100s and will remain bright for about one hour. Next, the light curve will decay on a few hours time scale to an intermediate luminosity level in which it will remain for several weeks, before slowly returning to its baseline magnitude. This estimate suffers from several uncertainties due to, e.g., the diversity of asteroid composition, their material strength, and spread in collision velocities. We estimate that the rate of collisions in the main belt with energy similar or larger than the DART impact is of the order of 7000 per year (+/-1dex). The large range is due to the uncertainty in the abundance of ~1-m size asteroids. We estimate the magnitude distribution of such events in the main belt, and we show that ~6% of these events may peak at magnitudes brighter than 21. The detection of these events requires a survey with <1hr cadence and may contribute to our understanding of the asteroids' size distribution, collisional physics, and dust production. With an adequate survey strategy, new survey telescopes may regularly detect asteroid collisions.

astro-ph.EP↗

arXiv2023

UV to near-IR observations of the DART-Dimorphos collision

The impact of the Double Asteroid Redirection Test (DART) spacecraft with Dimorphos allows us to study asteroid collision physics, including momentum transfer, the ejecta properties, and the visibility of such events in the Solar System. We report observations of the DART impact in the ultraviolet (UV), visible light, and near-infrared (IR) wavelengths. The observations support the existence of at least two separate components of the ejecta: a fast and a slow component. The fast-ejecta component is composed of a gaseous phase, moving at about 1.6 km/s with a mass of <10^4 kg. The fast ejecta is detected in the UV and visible light, but not in the near-IR $z$-band observations. Fitting a simplified optical thickness model to these observations allows us to constrain some of the properties of the fast ejecta, including its scattering efficiency and the opacity of the gas. The slow ejecta component is moving at typical velocities of up to about 10 m/s. It is composed of micrometer-size particles, that have a scattering efficiency, at the direction of the observer, of the order of 10^-3 and a total mass of about 10^6 kg. The larger particles in the slow ejecta, whose size is bound to be in the range between ~1 mm to ~1 m, likely have a scattering efficiency larger than that of the pre-impact Didymos system.

astro-ph.EP↗

arXiv2023

The Large Array Survey Telescope -- System Overview and Performances

The Large Array Survey Telescope (LAST) is a wide-field visible-light telescope array designed to explore the variable and transient sky with a high cadence. LAST will be composed of 48, 28-cm f/2.2 telescopes (32 already installed) equipped with full-frame backside-illuminated cooled CMOS detectors. Each telescope provides a field of view (FoV) of 7.4 deg^2 with 1.25 arcsec/pix, while the system FoV is 355 deg^2 in 2.9 Gpix. The total collecting area of LAST, with 48 telescopes, is equivalent to a 1.9-m telescope. The cost-effectiveness of the system (i.e., probed volume of space per unit time per unit cost) is about an order of magnitude higher than most existing and under-construction sky surveys. The telescopes are mounted on 12 separate mounts, each carrying four telescopes. This provides significant flexibility in operating the system. The first LAST system is under construction in the Israeli Negev Desert, with 32 telescopes already deployed. We present the system overview and performances based on the system commissioning data. The Bp 5-sigma limiting magnitude of a single 28-cm telescope is about 19.6 (21.0), in 20 s (20x20 s). Astrometric two-axes precision (rms) at the bright-end is about 60 (30)\,mas in 20\,s (20x20 s), while absolute photometric calibration, relative to GAIA, provides ~10 millimag accuracy. Relative photometric precision, in a single 20 s (320 s) image, at the bright-end measured over a time scale of about 60 min is about 3 (1) millimag. We discuss the system science goals, data pipelines, and the observatory control system in companion publications.

astro-ph.IM↗

arXiv2020

The upgrade of the ALICE TPC with GEMs and continuous readout

The upgrade of the ALICE TPC will allow the experiment to cope with the high interaction rates foreseen for the forthcoming Run 3 and Run 4 at the CERN LHC. In this article, we describe the design of new readout chambers and front-end electronics, which are driven by the goals of the experiment. Gas Electron Multiplier (GEM) detectors arranged in stacks containing four GEMs each, and continuous readout electronics based on the SAMPA chip, an ALICE development, are replacing the previous elements. The construction of these new elements, together with their associated quality control procedures, is explained in detail. Finally, the readout chamber and front-end electronics cards replacement, together with the commissioning of the detector prior to installation in the experimental cavern, are presented. After a nine-year period of R&D, construction, and assembly, the upgrade of the TPC was completed in 2020.

physics.ins-det↗

arXiv2020

BEER analysis of Kepler and CoRoT light curves. V. eBEER: Extension of the Algorithm to Eccentric Binaries

We present an extension of the BEER model for eccentric binaries - eBEER, approximating the BEaming, Ellipsoidal and Reflection effects by harmonic series of the Keplerian elements of their orbit. As such, it can be a tool for fast processing of light curves for detecting non-eclipsing eccentric binary systems. To validate the applicability of the eccentric model and its approximations, we applied eBEER to the Kepler light curves, identified a sample of bright non-eclipsing binary candidates, and followed three of them with the Wise observatory eShel spectrograph. After confirming the three systems are indeed radial-velocity (RV) binaries, we fitted the light curves and the RV data with PHOEBE, a detailed numerical light-curve and RV model, and showed that the PHOEBE derived parameters are similar to those obtained by the eBEER approximation.

astro-ph.SR↗

arXiv2018

Particle identification studies with a full-size 4-GEM prototype for the ALICE TPC upgrade

A large Time Projection Chamber is the main device for tracking and charged-particle identification in the ALICE experiment at the CERN LHC. After the second long shutdown in 2019/20, the LHC will deliver Pb beams colliding at an interaction rate of about 50 kHz, which is about a factor of 50 above the present readout rate of the TPC. This will result in a significant improvement on the sensitivity to rare probes that are considered key observables to characterize the QCD matter created in such collisions. In order to make full use of this luminosity, the currently used gated Multi-Wire Proportional Chambers will be replaced. The upgrade relies on continuously operated readout detectors employing Gas Electron Multiplier technology to retain the performance in terms of particle identification via the measurement of the specific energy loss by ionization d$E$/d$x$. A full-size readout chamber prototype was assembled in 2014 featuring a stack of four GEM foils as an amplification stage. The performance of the prototype was evaluated in a test beam campaign at the CERN PS. The d$E$/d$x$ resolution complies with both the performance of the currently operated MWPC-based readout chambers and the challenging requirements of the ALICE TPC upgrade program. Detailed simulations of the readout system are able to reproduce the data.

physics.ins-det↗

arXiv2016

A platform for analysis of nanoscale liquids with an integrated sensor array based on 2-d material

Analysis of nanoscale liquids, including wetting and flow phenomena, is a scientific challenge with far reaching implications for industrial technologies. We report the conception, development, and application of an integrated platform for the experimental characterization of liquids at the nanometer scale. The platform combines the sensing functionalities of an integrated, two-dimensional electronic device array with in situ application of highly sensitive optical micro-spectroscopy and atomic force microscopy. We demonstrate the performance capabilities of the platform with an embodiment based on an array of integrated, optically transparent graphene sensors. The application of electronic and optical sensing in the platform allows for differentiating between liquids electronically, for determining a liquid's molecular fingerprint, and for monitoring surface wetting dynamics in real time. In order to explore the platform's sensitivity limits, we record topographies and optical spectra of individual, spatially isolated sessile oil emulsion droplets having volumes of less than ten attoliters. The results demonstrate that integrated measurement functionalities based on two-dimensional materials have the potential to push lab-on-chip based analysis from the microscale to the nanoscale.

physics.ins-det↗

arXiv2016

Two dimensional, electronic particle tracking in liquids with a graphene-based magnetic sensor array

The investigation of liquid flow at the nanoscale is a key area of applied research with high relevance to Physics, Chemistry and Biology. We introduce a method and a device that allows to spatially resolve liquid flow by integrating an array of graphene-based magnetic sensors used for tracking the movement of magnetic nanoparticles in the liquid under investigation. With a novel device conception based on standard integration processes and experimentally verified material parameters, we simulate the performance of a single sensor pixel, as well as the whole array, for tracking magnetic nanoparticles. The results demonstrate the ability (a) to detect individual nanoparticles in the liquid and (b) to reconstruct particle trajectories across the sensor array as a function of time, in what we call "Magnetic Nanoparticle Velocimetry" technique. Being a non-optical detection method, potential applications include particle tracking and flow analysis in opaque media at sub-micron scales.

cond-mat.mes-hall↗

arXiv2012

Electroluminescence in Single Layer MoS2

We detect electroluminescence in single layer molybdenum disulphide (MoS2) field-effect transistors built on transparent glass substrates. By comparing absorption, photoluminescence, and electroluminescence of the same MoS2 layer, we find that they all involve the same excited state at 1.8eV. The electroluminescence has pronounced threshold behavior and is localized at the contacts. The results show that single layer MoS2, a direct band gap semiconductor, is promising for novel optoelectronic devices, such as 2-dimensional light detectors and emitters.

cond-mat.mes-hall↗