Searcharxiv⌕ Search

arXiv subjects

M. Finger Jr.

Publications and source records attributed to M. Finger Jr..

At least 19 recordsLinked to original sources
arXiv2026

Elliptic flow of $\pi^0$ mesons in Cu$+$Au collisions at $\sqrt{s_{_{NN}}}=200$ GeV and U$+$U at $\sqrt{s_{_{NN}}}=193$ GeV

The second-order azimuthal anisotropy coefficients ($v_2$) of neutral $\pi$ mesons ($\pi^0$) have been measured as a function of the transverse momentum ($p_T$) and centrality of Cu$+$Au collisions at $\sqrt{s_{_{NN}}}=200$~GeV and U$+$U at $\sqrt{s_{_{NN}}}=193$ GeV at the Relativistic Heavy Ion Collider. The analysis used experimental data collected by the PHENIX experiment at midrapidity $|\eta|<0.35$ over a broad $p_T$ range up to $\approx10$~GeV/$c$, and the obtained results are compared with previous PHENIX measurements in Au$+$Au collisions at $\sqrt{s_{_{NN}}}=200$~GeV. In all three collision systems, the $\pi^0$~$v_2$ values follow the scaling with the second-order participant eccentricity and the cube root of the number of participating nucleons ($\varepsilon_2 N_{\rm part}^{1/3}$) up to $\approx4$~GeV/$c$. Furthermore, the behavior of the azimuthal-dependent $\pi^0$ nuclear-modification factors and associated fractional parton-energy losses are evaluated from measured nonzero $v_2$ values of $\pi^0$ at $p_T>5$ GeV/$c$ and found to be approximately the same for similar values of $N_{\rm part}^{1/3}$ in these collision systems. These findings demonstrate that the mechanism of $\pi^0$ $v_2$ generation exhibits a high degree of universality across different initial geometries of heavy-ion collisions.

nucl-ex↗
arXiv2024

Measurement of the hard exclusive $\pi^{0}$ muoproduction cross section at COMPASS

A new and detailed measurement of the cross section for hard exclusive neutral-pion muoproduction on the proton was performed in a wide kinematic region, with the photon virtuality $Q^2$ ranging from 1 to 8 (GeV/$c$)$^{\rm\, 2}$ and the Bjorken variable $x_{\rm Bj}$ ranging from 0.02 to 0.45. The data were collected at COMPASS at CERN using 160 GeV/$c$ longitudinally polarised $\mu^+$ and $\mu^-$ beams scattering off a 2.5 m long liquid hydrogen target. From the average of the measured $\mu^+$ and $\mu^-$ cross sections, the virtual-photon--proton cross section is determined as a function of the squared four-momentum transfer between the initial and final state proton in the range 0.08 (GeV/$c$)$^{\rm\, 2}$ $< |t| <$ 0.64 (GeV/$c$)$^{\rm\, 2}$. From its angular distribution, the combined contribution of transversely and longitudinally polarised photons are determined, as well as transverse--transverse and longitudinal--transverse interference contributions. They are studied as functions of four-momentum transfer $|t|$, photon virtuality $Q^2$ and virtual-photon energy $\nu$. The longitudinal--transverse interference contribution is found to be compatible with zero. The significant transverse--transverse interference contribution reveals the existence of a dominant contribution by transversely polarized photons. This provides clear experimental evidence for the chiral-odd GPD $\overline{E}_T$. In addition, the existence of a non-negligible contribution of longitudinally polarized photons is suggested by the $|t|$-dependence of the cross section at $x_{\rm Bj} < $ 0.1 . Altogether, these results provide valuable input for future modelling of GPDs and thus of cross sections for exclusive pseudo-scalar meson production. Furthermore, they can be expected to facilitate the study of next-to-leading order corrections and higher-twist contributions.

hep-ex↗
arXiv2023

The Two-Photon Exchange Experiment at DESY

We propose a new measurement of the ratio of positron-proton to electron-proton elastic scattering at DESY. The purpose is to determine the contributions beyond single-photon exchange, which are essential for the Quantum Electrodynamic (QED) description of the most fundamental process in hadronic physics. By utilizing a 20 cm long liquid hydrogen target in conjunction with the extracted beam from the DESY synchrotron, we can achieve an average luminosity of $2.12\times10^{35}$ cm$^{-2}\cdot$s$^{-1}\cdot$sr$^{-1}$ ($\approx200$ times the luminosity achieved by OLYMPUS). The proposed TPEX experiment entails a commissioning run at 2 GeV, followed by measurements at 3 GeV, thereby providing new data up to $Q^2=4.6$ (GeV/$c$)$^2$ (twice the range of current measurements). We present and discuss the proposed experimental setup, run plan, and expectations.

nucl-ex↗
arXiv2023

Hot QCD White Paper

Hot QCD physics studies the nuclear strong force under extreme temperature and densities. Experimentally these conditions are achieved via high-energy collisions of heavy ions at the Relativistic Heavy Ion Collider (RHIC) and the Large Hadron Collider (LHC). In the past decade, a unique and substantial suite of data was collected at RHIC and the LHC, probing hydrodynamics at the nucleon scale, the temperature dependence of the transport properties of quark-gluon plasma, the phase diagram of nuclear matter, the interaction of quarks and gluons at different scales and much more. This document, as part of the 2023 nuclear science long range planning process, was written to review the progress in hot QCD since the 2015 Long Range Plan for Nuclear Science, as well as highlight the realization of previous recommendations, and present opportunities for the next decade, building on the accomplishments and investments made in theoretical developments and the construction of new detectors. Furthermore, this document provides additional context to support the recommendations voted on at the Joint Hot and Cold QCD Town Hall Meeting, which are reported in a separate document.

nucl-ex↗
arXiv2023

Two-Photon EXchange -- TPEX

We propose a new measurement of the ratio of positron-proton to electron-proton, elastic scattering at DESY to determine the contributions beyond single-photon exchange, which are essential to the QED description of the most fundamental process in hadronic physics. A 20~cm long liquid hydrogen target together with the extracted beam from the DESY synchrotron would yield an average luminosity of $2.12\times10^{35}$~cm$^{-2}\cdot$s$^{-1}\cdot$sr$^{-1}$ ($\sim200$ times the luminosity achieved by OLYMPUS). A commissioning run at 2 GeV followed by measurements at 3 GeV would provide new data up to $Q^2=4.6$~(GeV/$c$)$^2$ (twice the range of current measurements). Lead tungstate calorimeters would be used to detect the scattered leptons at polar angles of $30^\circ$, $50^\circ$, $70^\circ$, $90^\circ$, and $110^\circ$. The measurements could be scheduled to not interfere with the operation of PETRA. We present rate estimates and simulations for the planned measurements including background considerations. Initial measurements at the DESY test beam facility using prototype lead tungstate calorimeters in 2019, 2021, and 2022 were made to check the Monte Carlo simulations and the performance of the calorimeters. These tests also investigated different readout schemes (triggered and streaming). Various upgrades are possible to shorten the running time and to make higher beam energies and thus greater $Q^2$ ranges accessible.

nucl-ex↗
arXiv2022

Design of the ECCE Detector for the Electron Ion Collider

The EIC Comprehensive Chromodynamics Experiment (ECCE) detector has been designed to address the full scope of the proposed Electron Ion Collider (EIC) physics program as presented by the National Academy of Science and provide a deeper understanding of the quark-gluon structure of matter. To accomplish this, the ECCE detector offers nearly acceptance and energy coverage along with excellent tracking and particle identification. The ECCE detector was designed to be built within the budget envelope set out by the EIC project while simultaneously managing cost and schedule risks. This detector concept has been selected to be the basis for the EIC project detector.

physics.ins-det↗
arXiv2022

Detector Requirements and Simulation Results for the EIC Exclusive, Diffractive and Tagging Physics Program using the ECCE Detector Concept

This article presents a collection of simulation studies using the ECCE detector concept in the context of the EIC's exclusive, diffractive, and tagging physics program, which aims to further explore the rich quark-gluon structure of nucleons and nuclei. To successfully execute the program, ECCE proposed to utilize the detecter system close to the beamline to ensure exclusivity and tag ion beam/fragments for a particular reaction of interest. Preliminary studies confirmed the proposed technology and design satisfy the requirements. The projected physics impact results are based on the projected detector performance from the simulation at 10 or 100 fb^-1 of integrated luminosity. Additionally, a few insights on the potential 2nd Interaction Region can (IR) were also documented which could serve as a guidepost for the future development of a second EIC detector.

physics.ins-det↗
arXiv2022

Open Heavy Flavor Studies for the ECCE Detector at the Electron Ion Collider

The ECCE detector has been recommended as the selected reference detector for the future Electron-Ion Collider (EIC). A series of simulation studies have been carried out to validate the physics feasibility of the ECCE detector. In this paper, detailed studies of heavy flavor hadron and jet reconstruction and physics projections with the ECCE detector performance and different magnet options will be presented. The ECCE detector has enabled precise EIC heavy flavor hadron and jet measurements with a broad kinematic coverage. These proposed heavy flavor measurements will help systematically study the hadronization process in vacuum and nuclear medium especially in the underexplored kinematic region.

physics.ins-det↗
arXiv2022

ECCE Sensitivity Studies for Single Hadron Transverse Single Spin Asymmetry Measurements

We performed feasibility studies for various single transverse spin measurements that are related to the Sivers effect, transversity and the tensor charge, and the Collins fragmentation function. The processes studied include semi-inclusive deep inelastic scattering (SIDIS) where single hadrons (pions and kaons) were detected in addition to the scattered DIS lepton. The data were obtained in {\sc pythia}6 and {\sc geant}4 simulated e+p collisions at 18 GeV on 275 GeV, 18 on 100, 10 on 100, and 5 on 41 that use the ECCE detector configuration. Typical DIS kinematics were selected, most notably $Q^2 > 1 $ GeV$^2$, and cover the $x$ range from $10^{-4}$ to $1$. The single spin asymmetries were extracted as a function of $x$ and $Q^2$, as well as the semi-inclusive variables $z$, and $P_T$. They are obtained in azimuthal moments in combinations of the azimuthal angles of the hadron transverse momentum and transverse spin of the nucleon relative to the lepton scattering plane. The initially unpolarized MonteCarlo was re-weighted in the true kinematic variables, hadron types and parton flavors based on global fits of fixed target SIDIS experiments and $e^+e^-$ annihilation data. The expected statistical precision of such measurements is extrapolated to 10 fb$^{-1}$ and potential systematic uncertainties are approximated given the deviations between true and reconstructed yields. The impact on the knowledge of the Sivers functions, transversity and tensor charges, and the Collins function has then been evaluated in the same phenomenological extractions as in the Yellow Report. The impact is found to be comparable to that obtained with the parameterized Yellow Report detector and shows that the ECCE detector configuration can fulfill the physics goals on these quantities.

hep-ex↗
arXiv2022

ECCE unpolarized TMD measurements

We performed feasibility studies for various measurements that are related to unpolarized TMD distribution and fragmentation functions. The processes studied include semi-inclusive Deep inelastic scattering (SIDIS) where single hadrons (pions and kaons) were detected in addition to the scattered DIS lepton. The single hadron cross sections and multiplicities were extracted as a function of the DIS variables $x$ and $Q^2$, as well as the semi-inclusive variables $z$, which corresponds to the momentum fraction the detected hadron carries relative to the struck parton and $P_T$, which corresponds to the transverse momentum of the detected hadron relative to the virtual photon. The expected statistical precision of such measurements is extrapolated to accumulated luminosities of 10 fb$^{-1}$ and potential systematic uncertainties are approximated given the deviations between true and reconstructed yields.

hep-ex↗
arXiv2022

Exclusive J/$ψ$ Detection and Physics with ECCE

Exclusive heavy quarkonium photoproduction is one of the most popular processes in EIC, which has a large cross section and a simple final state. Due to the gluonic nature of the exchange Pomeron, this process can be related to the gluon distributions in the nucleus. The momentum transfer dependence of this process is sensitive to the interaction sites, which provides a powerful tool to probe the spatial distribution of gluons in the nucleus. Recently the problem of the origin of hadron mass has received lots of attention in determining the anomaly contribution $M_{a}$. The trace anomaly is sensitive to the gluon condensate, and exclusive production of quarkonia such as J/$ψ$ and $Υ$ can serve as a sensitive probe to constrain it. In this paper, we present the performance of the ECCE detector for exclusive J/$ψ$ detection and the capability of this process to investigate the above physics opportunities with ECCE.

nucl-ex↗
arXiv2022

Search for $e\to\tau$ Charged Lepton Flavor Violation at the EIC with the ECCE Detector

The recently approved Electron-Ion Collider (EIC) will provide a unique new opportunity for searches of charged lepton flavor violation (CLFV) and other new physics scenarios. In contrast to the $e \leftrightarrow \mu$ CLFV transition for which very stringent limits exist, there is still a relatively large discovery space for the $e \to \tau$ CLFV transition, potentially to be explored by the EIC. With the latest detector design of ECCE (EIC Comprehensive Chromodynamics Experiment) and projected integral luminosity of the EIC, we find the $\tau$-leptons created in the DIS process $ep\to \tau X$ are expected to be identified with high efficiency. A first ECCE simulation study, restricted to the 3-prong $\tau$-decay mode and with limited statistics for the Standard Model backgrounds, estimates that the EIC will be able to improve the current exclusion limit on $e\to \tau$ CLFV by an order of magnitude.

hep-ph↗
arXiv2022

Design and Simulated Performance of Calorimetry Systems for the ECCE Detector at the Electron Ion Collider

We describe the design and performance the calorimeter systems used in the ECCE detector design to achieve the overall performance specifications cost-effectively with careful consideration of appropriate technical and schedule risks. The calorimeter systems consist of three electromagnetic calorimeters, covering the combined pseudorapdity range from -3.7 to 3.8 and two hadronic calorimeters. Key calorimeter performances which include energy and position resolutions, reconstruction efficiency, and particle identification will be presented.

physics.ins-det↗
arXiv2022

AI-assisted Optimization of the ECCE Tracking System at the Electron Ion Collider

The Electron-Ion Collider (EIC) is a cutting-edge accelerator facility that will study the nature of the "glue" that binds the building blocks of the visible matter in the universe. The proposed experiment will be realized at Brookhaven National Laboratory in approximately 10 years from now, with detector design and R&D currently ongoing. Notably, EIC is one of the first large-scale facilities to leverage Artificial Intelligence (AI) already starting from the design and R&D phases. The EIC Comprehensive Chromodynamics Experiment (ECCE) is a consortium that proposed a detector design based on a 1.5T solenoid. The EIC detector proposal review concluded that the ECCE design will serve as the reference design for an EIC detector. Herein we describe a comprehensive optimization of the ECCE tracker using AI. The work required a complex parametrization of the simulated detector system. Our approach dealt with an optimization problem in a multidimensional design space driven by multiple objectives that encode the detector performance, while satisfying several mechanical constraints. We describe our strategy and show results obtained for the ECCE tracking system. The AI-assisted design is agnostic to the simulation framework and can be extended to other sub-detectors or to a system of sub-detectors to further optimize the performance of the EIC detector.

physics.ins-det↗
arXiv2022

Scientific Computing Plan for the ECCE Detector at the Electron Ion Collider

The Electron Ion Collider (EIC) is the next generation of precision QCD facility to be built at Brookhaven National Laboratory in conjunction with Thomas Jefferson National Laboratory. There are a significant number of software and computing challenges that need to be overcome at the EIC. During the EIC detector proposal development period, the ECCE consortium began identifying and addressing these challenges in the process of producing a complete detector proposal based upon detailed detector and physics simulations. In this document, the software and computing efforts to produce this proposal are discussed; furthermore, the computing and software model and resources required for the future of ECCE are described.

physics.ins-det↗
arXiv2021

EAS observation conditions in the SPHERE-2 balloon experiment

The SPHERE project studies primary cosmic rays by detection of the Cherenkov light of extensive air showers reflected from the snowy surface of the earth. Measurements with the aerial-based detector SPHERE-2 were performed in 2011-2013. The detector was lifted by the balloon at altitudes up to 900 m above snowed surface of Lake Baikal, Russia. The results of the experiment are summarized now in a series of papers that opens with this article. An overview of the SPHERE-2 detector telemetry monitoring systems is presented along with the analysis of the measurements conditions including atmosphere profile. The analysis of the detector state and environment atmosphere conditions monitoring provided various cross-checks of detector calibration, positioning and performance.

astro-ph.HE↗
arXiv2019

The SPHERE-2 detector for observation of extensive air showers in 1 PeV -- 1 EeV energy range

The SPHERE-2 balloon-borne detector designed for extensive air shower (EAS) observations using EAS optical Vavilov-Cherenkov radiation (``Cherenkov light''), reflected from the snow-covered surface of Lake Baikal is described. We briefly discuss the concept behind the reflected Cherenkov light method, characterize the conditions at the experimental site and overview the construction of the tethered balloon used to lift the SPHERE-2 telescope above the surface. This paper is mainly dedicated to a detailed technical description of the detector, including its optical system, sensitive elements, electronics, and data acquisition system (DAQ). The results of some laboratory and field tests of the optical system are presented.

astro-ph.IM↗