arXiv subjects

M. G. Pellegriti

Publications and source records attributed to M. G. Pellegriti.

14 recordsLinked to original sources

arXiv2026

First $^{94}$Nb($n,γ$) Measurement: Constraining the Nucleosynthetic Origin of $^{94}$Mo in Presolar Grains

Isotopic measurements of presolar silicon carbide grains from dying stars have revealed a puzzling overabundance of $^{94}$Mo that stellar nucleosynthesis models have failed to reproduce for two decades. This discrepancy challenged our understanding of the slow neutron-capture process ($s$-process) that forges approximately half of the elements heavier than iron. The key uncertainty lies at $^{94}$Nb, a radiactive branching point where competition between neutron capture and beta decay governs the $^{94}$Mo production, yet the neutron-capture cross section had never been measured. Here we report the first experimental determination of the $^{94}$Nb(n,$γ$)$^{95}$Nb cross section important for Mo isotopic abundances. The measurement was enabled by a coordinated effort involving high-purity target preparation at Institute of Solid State and Materials Research (IFW) Dresden, radioactive sample production at the Institut Laue-Langevin (ILL) Grenoble, radiochemical characterization at Paul Scherrer Institute (PSI) Villigen, and the Time-of-Flight CERN n$\_$TOF facility using for the first time segmented total-energy detectors. Incorporation of the resulting Maxwellian-averaged cross section into fully coupled nucleosynthesis models of low-mass asymptotic giant branch (AGB) stars brings them into agreement with the presolar grain data. These results remove a major nuclear-physics input uncertainty at the $^{94}$Nb branching point and provide a firmer foundation for understanding the origin of $^{94}$Mo in the solar system.

nucl-ex↗

arXiv2023

Riptide: a proton-recoil track imaging detector for fast neutrons

Riptide is a detector concept aiming to track fast neutrons. It is based on neutron--proton elastic collisions inside a plastic scintillator, where the neutron momentum can be measured by imaging the scintillation light. More specifically, by stereoscopically imaging the recoil proton tracks, the proposed apparatus provides neutron spectrometry capability and enable the online analysis of the specific energy loss along the track. In principle, the spatial and topological event reconstruction enables particle discrimination, which is a crucial property for neutron detectors. In this contribution, we report the advances on the Riptide detector concept. In particular, we have developed a Geant4 optical simulation to demonstrate the possibility of reconstructing with sufficient precision the tracks and the vertices of neutron interactions inside a plastic scintillator. To realistically model the optics of the scintillation detector, mono-energetic protons were generated inside a $6\times6\times6$ cm$^3$ cubic BC-408 scintillator, and the produced optical photons were propagated and then recorded on a scoring plane corresponding to the surfaces of the cube. The photons were then transported through an optical system to a $2\times2$ cm$^2$ photo sensitive area with 1 Megapixel. Moreover, we have developed two different analysis procedures to reconstruct 3D tracks: one based on data fitting and one on Principal Component Analysis. The main results of this study will be presented with a particular focus on the role of the optical system and the attainable spatial and energy resolution.

physics.ins-det↗

arXiv2023

Pushing the high count rate limits of scintillation detectors for challenging neutron-capture experiments

One of the critical aspects for the accurate determination of neutron capture cross sections when combining time-of-flight and total energy detector techniques is the characterization and control of systematic uncertainties associated to the measuring devices. In this work we explore the most conspicuous effects associated to harsh count rate conditions: dead-time and pile-up effects. Both effects, when not properly treated, can lead to large systematic uncertainties and bias in the determination of neutron cross sections. In the majority of neutron capture measurements carried out at the CERN n\_TOF facility, the detectors of choice are the C$_{6}$D$_{6}$ liquid-based either in form of large-volume cells or recently commissioned sTED detector array, consisting of much smaller-volume modules. To account for the aforementioned effects, we introduce a Monte Carlo model for these detectors mimicking harsh count rate conditions similar to those happening at the CERN n\_TOF 20~m fligth path vertical measuring station. The model parameters are extracted by comparison with the experimental data taken at the same facility during 2022 experimental campaign. We propose a novel methodology to consider both, dead-time and pile-up effects simultaneously for these fast detectors and check the applicability to experimental data from $^{197}$Au($n$,$γ$), including the saturated 4.9~eV resonance which is an important component of normalization for neutron cross section measurements.

physics.ins-det↗

arXiv2022

A proton-recoil track imaging system for fast neutrons: the RIPTIDE detector

Fast neutron detection is often based on the neutron-proton elastic scattering reaction: the ionization caused by recoil protons in a hydrogenous material constitutes the basic information for the design and development of a class of neutron detectors. Although experimental techniques have continuously improved, proton-recoil track imaging remains still at the frontier of n-detection systems, due to the high photon sensitivity required. Several state-of-the-art approaches for neutron tracking by using n-p single and double scattering - referred to as Recoil Proton Track Imaging (RPTI) - can be found in the literature. So far, they have showed limits in terms of detection efficiency, complexity, cost, and implementation. In order to address some of these deficiencies, we have proposed RIPTIDE a novel recoil-proton track imaging detector in which the light output produced by a fast scintillator is used to perform a complete reconstruction in space and time of the interaction events. The proposed idea is viable thanks to the dramatic advances in low noise and single photon counting achieved in the last decade by new scientific CMOS cameras as well as pixel sensors, like Timepix or MIMOSIS. In this contribution, we report the advances on the RIPTIDE concept: Geant4 Monte Carlo simulations, light collection tests as well as state-of-the-art approach to image readout, processing and fast analysis.

physics.ins-det↗

arXiv2022

The CERN n TOF NEAR station for astrophysics- and application-related neutron activation measurements

A new experimental area, the NEAR station, has recently been built at the CERN n TOF facility, at a short distance from the spallation target (1.5 m). The new area, characterized by a neutron beam of very high flux, has been designed with the purpose of performing activation measurements of interest for astrophysics and various applications. The beam is transported from the spallation target to the NEAR station through a hole in the shielding wall of the target, inside which a collimator is inserted. The new area is complemented with a γ-ray spectroscopy laboratory, the GEAR station, equipped with a high efficiency HPGe detector, for the measurement of the activity resulting from irradiation of a sample in the NEAR station. The use of a moderator/filter assembly is envisaged, in order to produce a neutron beam of Maxwellian shape at different thermal energies, necessary for the measurement of Maxwellian Averaged Cross Sections of astrophysical interest. A new fast-cycling activation technique is also being investigated, for measurements of reactions leading to isotopes of very short half life.

physics.ins-det↗

arXiv2022

Advances and new ideas for neutron-capture astrophysics experiments at CERN n_TOF

This article presents a few selected developments and future ideas related to the measurement of $(n,γ)$ data of astrophysical interest at CERN n_TOF. The MC-aided analysis methodology for the use of low-efficiency radiation detectors in time-of-flight neutron-capture measurements is discussed, with particular emphasis on the systematic accuracy. Several recent instrumental advances are also presented, such as the development of total-energy detectors with $γ$-ray imaging capability for background suppression, and the development of an array of small-volume organic scintillators aimed at exploiting the high instantaneous neutron-flux of EAR2. Finally, astrophysics prospects related to the intermediate $i$ neutron-capture process of nucleosynthesis are discussed in the context of the new NEAR activation area.

nucl-ex↗

arXiv2021

The CaloCube calorimeter for high-energy cosmic-ray measurements in space: performance of a large-scale prototype

The direct observation of high-energy cosmic rays, up to the PeV energy region, will increasingly rely on highly performing calorimeters, and the physics performance will be primarily determined by their geometrical acceptance and energy resolution. Thus, it is extremely important to optimize their geometrical design, granularity and absorption depth, with respect to the totalmass of the apparatus, which is amongst the most important constraints for a space mission. CaloCube is an homogeneous calorimeter whose basic geometry is cubic and isotropic, obtained by filling the cubic volume with small cubic scintillating crystals. In this way it is possible to detect particles arriving from every direction in space, thus maximizing the acceptance. This design summarizes a three-year R&D activity, aiming to both optimize and study the full-scale performance of the calorimeter, in the perspective of a cosmic-ray space mission, and investigate a viable technical design by means of the construction of several sizable prototypes. A large scale prototype, made of a mesh of 5x5x18 CsI(Tl) crystals, has been constructed and tested on high-energy particle beams at CERN SPS accelerator. In this paper we describe the CaloCube design and present the results relative to the response of the large scale prototype to electrons.

physics.ins-det↗

arXiv2020

Evaluation of the $^{13}$N($α$,p)$^{16}$O thermonuclear reaction rate and its impact on the isotopic composition of supernova grains

It has been suggested that hydrogen ingestion into the helium shell of massive stars could lead to high $^{13}$C and $^{15}$N excesses when the shock of a core-collapse supernova passes through its helium shell. This prediction questions the origin of extremely high $^{13}$C and $^{15}$N abundances observed in rare presolar SiC grains which is usually attributed to classical novae. In this context $^{13}$N($α$,p)$^{16}$O the reaction plays an important role since it is in competition with $^{13}$N $β^+$-decay to $^{13}$C. The $^{13}$N($α$,p)$^{16}$O reaction rate used in stellar evolution calculations comes from the CF88 compilation with very scarce information on the origin of this rate. The goal of this work is to provide a recommended $^{13}$N($α$,p)$^{16}$O reaction rate, based on available experimental data. Unbound nuclear states in the $^{17}$F compound nucleus were studied using the spectroscopic information of the analog states in $^{17}$O nucleus that were measured at the Alto facility using the $^{13}$C($^7$Li,t)$^{17}$O alpha-transfer reaction, and spectroscopic factors were derived using a DWBA analysis. This spectroscopic information was used to calculate a recommended $^{13}$N($α$,p)$^{16}$O reaction rate with meaningful uncertainty using a Monte Carlo approach. The present $^{13}$N($α$,p)$^{16}$O reaction rate is found to be within a factor of two of the previous evaluation, with a typical uncertainty of a factor 2-3. The source of this uncertainty comes from the three resonances at $E_r^{c.m.} = 221$, 741 and 959 keV. This new error estimation translates to an overall uncertainty in the $^{13}$C production of a factor of 50. The main source of uncertainty on the re-evaluated $^{13}$N($α$,p)$^{16}$O reaction rate currently comes from the uncertain alpha-width of relevant $^{17}$F states.

nucl-ex↗

arXiv2017

CaloCube: a novel calorimeter for high-energy cosmic rays in space

In order to extend the direct observation of high-energy cosmic rays up to the PeV region, highly performing calorimeters with large geometrical acceptance and high energy resolution are required. Within the constraint of the total mass of the apparatus, crucial for a space mission, the calorimeters must be optimized with respect to their geometrical acceptance, granularity and absorption depth. CaloCube is a homogeneous calorimeter with cubic geometry, to maximise the acceptance being sensitive to particles from every direction in space; granularity is obtained by relying on small cubic scintillating crystals as active elements. Different scintillating materials have been studied. The crystal sizes and spacing among them have been optimized with respect to the energy resolution. A prototype, based on CsI(Tl) cubic crystals, has been constructed and tested with particle beams. Some results of tests with different beams at CERN are presented.

physics.ins-det↗

arXiv2016

An above-barrier narrow resonance in $^{15}$F

Intense and purified radioactive beam of post-accelerated $^{14}$O was used to study the low-lying states in the unbound $^{15}$F nucleus. Exploiting resonant elastic scattering in inverse kinematics with a thick target, the second excited state, a resonance at E$\_R$=4.757(6)(10)~MeV with a width of $Γ$=36(5)(14)~keV was measured for the first time with high precision. The structure of this narrow above-barrier state in a nucleus located two neutrons beyond the proton drip line was investigated using the Gamow Shell Model in the coupled channel representation with a $^{12}$C core and three valence protons. It is found that it is an almost pure wave function of two quasi-bound protons in the $2s\_{1/2}$ shell.

nucl-ex↗

arXiv2016

Long term monitoring of the optical background in the Capo Passero deep-sea site with the NEMO tower prototype

The NEMO Phase-2 tower is the first detector which was operated underwater for more than one year at the "record" depth of 3500 m. It was designed and built within the framework of the NEMO (NEutrino Mediterranean Observatory) project. The 380 m high tower was successfully installed in March 2013 80 km offshore Capo Passero (Italy). This is the first prototype operated on the site where the italian node of the KM3NeT neutrino telescope will be built. The installation and operation of the NEMO Phase-2 tower has proven the functionality of the infrastructure and the operability at 3500 m depth. A more than one year long monitoring of the deep water characteristics of the site has been also provided. In this paper the infrastructure and the tower structure and instrumentation are described. The results of long term optical background measurements are presented. The rates show stable and low baseline values, compatible with the contribution of 40K light emission, with a small percentage of light bursts due to bioluminescence. All these features confirm the stability and good optical properties of the site.

physics.ins-det↗

arXiv2014

Measurement of the atmospheric muon depth intensity relation with the NEMO Phase-2 tower

The results of the analysis of the data collected with the NEMO Phase-2 tower, deployed at 3500 m depth about 80 km off-shore Capo Passero (Italy), are presented. Cherenkov photons detected with the photomultipliers tubes were used to reconstruct the tracks of atmospheric muons. Their zenith-angle distribution was measured and the results compared with Monte Carlo simulations. An evaluation of the systematic effects due to uncertainties on environmental and detector parameters is also included. The associated depth intensity relation was evaluated and compared with previous measurements and theoretical predictions. With the present analysis, the muon depth intensity relation has been measured up to 13 km of water equivalent.

physics.ins-det↗

arXiv2014

Probing Nuclear forces beyond the drip-line using the mirror nuclei $^{16}$N and $^{16}$F

Radioactive beams of $^{14}$O and $^{15}$O were used to populate the resonant states 1/2$^+$, 5/2$^+$ and $0^-,1^-,2^-$ in the unbound $^{15}$F and $^{16}$F nuclei respectively by means of proton elastic scattering reactions in inverse kinematics. Based on their large proton spectroscopic factor values, the resonant states in $^{16}$F can be viewed as a core of $^{14}$O plus a proton in the 2s$_{1/2}$ or 1d$_{5/2}$ shell and a neutron in 1p$_{1/2}$. Experimental energies were used to derive the strength of the 2s$_{1/2}$-1p$_{1/2}$ and 1d$_{5/2}$-1p$_{1/2}$ proton-neutron interactions. It is found that the former changes by 40% compared with the mirror nucleus $^{16}$N, and the second by 10%. This apparent symmetry breaking of the nuclear force between mirror nuclei finds explanation in the role of the large coupling to the continuum for the states built on an $\ell=0$ proton configuration.

nucl-ex↗

arXiv2006

New pathway to bypass the 15O waiting point

We propose the sequential reaction process $^{15}$O($p$,$γ)(β^{+}$)$^{16}$O as a new pathway to bypass of the $^{15}$O waiting point. This exotic reaction is found to have a surprisingly high cross section, approximately 10$^{10}$ times higher than the $^{15}$O($p$,$β^{+}$)$^{16}$O. These cross sections were calculated after precise measurements of energies and widths of the proton-unbound $^{16}$F low lying states, obtained using the H($^{15}$O,p)$^{15}$O reaction. The large $(p,γ)(β^{+})$ cross section can be understood to arise from the more efficient feeding of the low energy wing of the ground state resonance by the gamma decay. The implications of the new reaction in novae explosions and X-ray bursts are discussed.

nucl-ex↗