SearcharxivSearch

arXiv subjects

M. Hocevar

Publications and source records attributed to M. Hocevar.

9 recordsLinked to original sources

"Smoking gun" signatures of topological milestones in trivial materials by measurement fine-tuning and data postselection

Exploring the topology of electronic bands is a way to realize new states of matter with possible implications for information technology. Because bands cannot always be observed directly, a central question is how to tell that a topological regime has been achieved. Experiments are often guided by a prediction of a unique signal or a pattern, called "the smoking gun". Examples include peaks in conductivity, microwave resonances, and shifts in interference fringes. However, many condensed matter experiments are performed on relatively small, micron or nanometer-scale, specimens. These structures are in the so-called mesoscopic regime, between atomic and macroscopic physics, where phenomenology is particularly rich. In this paper, we demonstrate that the trivial effects of quantum confinement, quantum interference and charge dynamics in nanostructures can reproduce accepted smoking gun signatures of triplet supercurrents, Majorana modes, topological Josephson junctions and fractionalized particles. The examples we use correspond to milestones of topological quantum computing: qubit spectroscopy, fusion and braiding. None of the samples we use are in the topological regime. The smoking gun patterns are achieved by fine-tuning during data acquisition and by subsequent data selection to pick non-representative examples out of a fluid multitude of similar patterns that do not generally fit the "smoking gun" designation. Building on this insight, we discuss ways that experimentalists can rigorously delineate between topological and non-topological effects, and the effects of fine-tuning by deeper analysis of larger volumes of data.

cond-mat.mes-hall

Role of a capping layer on the crystalline structure of Sn thin films grown at cryogenic temperatures on InSb substrates

Metal deposition with cryogenic cooling is widely utilized in the condensed matter community for producing ultra-thin epitaxial superconducting layers on semiconductors. However, a drawback arises when these films return to room temperature, as they tend to undergo dewetting. This issue is mitigated by capping the films with an amorphous layer. In this study, we examined the impact of different in-situ fabricated caps on the structural characteristics of Sn thin films deposited at 80 K on InSb substrates. Regardless of the type of capping, we observed that the films remained smooth upon returning to room temperature and were epitaxial on InSb in the cubic Sn ($\alpha$-Sn) phase. However, we noted a correlation between alumina capping with an electron beam evaporator and an increased presence of tetragonal Sn ($\beta$-Sn) grains. This suggests that heating from the alumina source may contribute to a partial phase transition in the Sn layer. The existence of the $\beta$-Sn phase induced superconducting behavior of the films by percolation effect. This study highlights the potential for modifying the structural properties of cryogenic Sn thin films through in-situ capping, paving the way for precise control in the production of superconducting Sn films for integration into quantum computing platforms.

cond-mat.mtrl-sci

Missing odd-order Shapiro steps do not uniquely indicate fractional Josephson effect

Topological superconductivity is expected to spur Majorana zero modes -- exotic states that are also considered a quantum technology asset. Fractional Josephson effect is their manifestation in electronic transport measurements, often under microwave irradiation. A fraction of induced resonances, known as Shapiro steps, should vanish, in a pattern that signifies the presence of Majorana modes. Here we report patterns of Shapiro steps expected in topological Josephson junctions, such as the missing first Shapiro step, or several missing odd-order steps. But our junctions, which are InAs quantum wells with Al contacts, are studied near zero magnetic field, meaning that they are not in the topological regime. We also observe other patterns such as missing even steps and several missing steps in a row, not relevant to topological superconductivity. Potentially responsible for our observations is rounding of not fully developed steps superimposed on non-monotonic resistance versus voltage curves, but several origins may be at play. Our results demonstrate that any single pattern, even striking, cannot uniquely identify topological superconductivity, and a multifactor approach is necessary to unambiguously establish this important phenomenon.

cond-mat.mes-hall

Large Second-Order Josephson Effect in Planar Superconductor-Semiconductor Junctions

We investigate the current-phase relations of Al/InAs-quantum well planar Josephson junctions fabricated using nanowire shadowing technique. Based on several experiments, we conclude that the junctions exhibit an unusually large second-order Josephson harmonic, the $\sin(2\varphi)$ term. First, superconducting quantum interference devices (dc-SQUIDs) show half-periodic oscillations, tunable by gate voltages as well as magnetic flux. Second, Josephson junction devices exhibit kinks near half-flux quantum in supercurrent diffraction patterns. Third, half-integer Shapiro steps are present in the junctions. Similar phenomena are observed in Sn/InAs quantum well devices. We perform data fitting to a numerical model with a two-component current phase relation. Analysis including a loop inductance suggests that the sign of the second harmonic term is negative. The microscopic origins of the observed effect remain to be understood. We consider alternative explanations which can account for some but not all of the evidence.

cond-mat.mes-hall

Planar Josephson Junctions Templated by Nanowire Shadowing

More and more materials, with a growing variety of properties, are built into electronic devices. This is motivated both by increased device performance and by the studies of materials themselves. An important type of device is a Josephson junction based on the proximity effect between a quantum material and a superconductor, useful for fundamental research as well as for quantum and other technologies. When both junction contacts are placed on the same surface, such as a two-dimensional material, the junction is called ``planar". One outstanding challenge is that not all materials are amenable to the standard planar junction fabrication. The device quality, rather than the intrinsic characteristics, may be defining the results. Here, we introduce a technique in which nanowires are placed on the surface and act as a shadow mask for the superconductor. The advantages are that the smallest dimension is determined by the nanowire diameter and does not require lithography, and that the junction is not exposed to chemicals such as etchants. We demonstrate this method with an InAs quantum well, using two superconductors - Al and Sn, and two semiconductor nanowires - InAs and InSb. The junctions exhibit critical current levels consistent with transparent interfaces and uniform width. We show that the template nanowire can be operated as a self-aligned electrostatic gate. Beyond single junctions, we create SQUIDs with two gate-tunable junctions. We suggest that our method can be used for a large variety of quantum materials including van der Waals layers, topological insulators, Weyl semimetals and future materials for which proximity effect devices is a promising research avenue.

cond-mat.mes-hall

Parity-preserving and magnetic field resilient superconductivity in indium antimonide nanowires with tin shells

We study bottom-up grown semiconductor indium antimonide nanowires that are coated with shells of tin. The shells are uniform in thickness. The interface between Sn and InSb is abrupt and without interdiffusion. Devices for transport are prepared by in-situ shadowing of nanowires using nearby nanowires as well as flakes, resulting in etch-free junctions. Tin is found to induce a hard superconducting gap in the range 600-700 micro-eV. Superconductivity persists up to 4 T in magnetic field. A tin island exhibits the coveted two-electron charging effect, a hallmark of charge parity stability. The findings open avenues for superconducting and topological quantum circuits based on new superconductor-semiconductor combinations.

cond-mat.mes-hall

Full characterization and modelling of graded interfaces in a high lattice-mismatch axial nanowire heterostructure

Controlling the strain level in nanowire heterostructures is critical for obtaining coherent interfaces of high crystalline quality and for the setting of functional properties such as photon emission, carrier mobility or piezoelectricity. In a nanowire axial heterostructure featuring a sharp interface, strain is set by the materials lattice mismatch and the nanowire radius. Here, we show that introducing a graded interface in nanowire heterostructures offers an additional parameter to control strain. For a given interface length and lattice mismatch, we first derive theoretically the maximum nanowire radius below which coherent growth is possible. We validate these findings by growing and characterizing various In(Ga)As/GaAs nanowire heterostructures with graded interfaces. Furthermore, we perform a complete chemical and structural characterization of the interface by combining energy-dispersive X-ray spectroscopy and high resolution transmission electron microscopy. In the case of coherent growth, we directly observe that the mismatch strain relaxes elastically on the side walls of the nanowire around the interface area, while the core of the nanowire remains partially strained. Moreover, our experimental data show good agreement with finite element calculations. This analysis confirms in particular that mechanical strain is largely reduced by interface grading. Overall, our work extends the parameter space for the design of nanowire heterostructures, thus opening new opportunities for nanowire optoelectronics.

cond-mat.mtrl-sci

Erasing odd-parity states in semiconductor quantum dots coupled to superconductors

Quantum dots are gate-defined within InSb nanowires, in proximity to NbTiN superconducting contacts. As the coupling between the dot and the superconductor is increased, the odd-parity occupations become non-discernible (erased) both above and below the induced superconducting gap. Above the gap, conductance in the odd Coulomb valleys increases until the valleys are lifted. Below the gap, Andreev bound states undergo quantum phase transitions to singlet ground states at odd occupancy. We observe that the apparent erasure of odd-parity regimes coincides at low-bias and at high-bias. This observation is reproduced in numerical renormalization group simulations, and is explained qualitatively by a competition between Kondo temperature and the induced superconducting gap. In the erased odd-parity regime, the quantum dot exhibits transport features similar to a finite-size Majorana nanowire, drawing parallels between even-odd dot occupations and even-odd one-dimensional subband occupations.

cond-mat.mes-hall

Mirage Andreev spectra generated by mesoscopic leads in nanowire quantum dots

We study transport mediated by Andreev bound states formed in InSb nanowire quantum dots. Two kinds of superconducting source and drain contacts are used: epitaxial Al/InSb devices exhibit a doubling of tunneling resonances, while in NbTiN/InSb devices Andreev spectra of the dot appear to be replicated multiple times at increasing source-drain bias voltages. In both devices, a mirage of a crowded spectrum is created. To describe the observations a model is developed that combines the effects of a soft induced gap and of additional Andreev bound states both in the quantum dot and in the finite regions of the nanowire adjacent to the quantum dot. Understanding of Andreev spectroscopy is important for the correct interpretation of Majorana experiments done on the same structures.

cond-mat.mes-hall