arXiv subjects

M. Houssem Kasbaoui

Publications and source records attributed to M. Houssem Kasbaoui.

11 recordsLinked to original sources

arXiv2026

Modeling the wall-slip in large eddy simulations with immersed boundaries

We present a framework for Large Eddy Simulations (LES) with Immersed Boundaries (IBs) to simulate high Reynolds number flows over complex walls. In this approach, which we call Immersed Boundary-Modeled LES (IBMLES), we volume-filter the Navier-Stokes equations to derive the IB bodyforce. This also gives rise to the subfilter-scale (SFS) stress and residual viscous stress tensors, the latter of which is closed, and we expect the SFS stress can be closed with existing models. We show that the IB bodyforce can be closed by modeling the wall-slip velocity and provide two such models. The first is an algebraic model based on volume-filtering the Van-Driest velocity profile, and the second is a slip-length model. We perform an \textit{a priori} analysis by volume-filtering direct numerical simulation (DNS) data of turbulent channel flow at $\mathrm{Re}_τ=5200$ to inform these models and investigate the behavior of the other terms in this formulation. We find streamwise wall-slip velocity is significant and both models show good agreement with volume-filtered DNS data on average. Slip velocity is non-uniform and retains a signature of inner or large scale flow structures depending on filter size. SFS terms are analogous to those in traditional LES and can likely be modeled with existing SFS models such Dynamic-Smagorinsky. Residual viscous stress is significant, so it must be considered in IBMLES. We perform filtering with multiple filter types and find there is little sensitivity to the choice of filter kernel so long as it abides by the assumptions given in this framework. Based on these results, we propose a dynamic procedure for determining slip-length that will be assessed in future studies.

physics.flu-dyn↗

arXiv2025

Dynamics of an oscillatory boundary layer over a sediment bed in Euler-Lagrange simulations

We investigate the dynamics of an oscillatory boundary layer developing over a bed of collisional and freely evolving sediment grains. We perform Euler-Lagrange simulations at Reynolds numbers $\mathrm{Re}_δ= 200$, 400, and 800, density ratio $ρ_p/ρ_f = 2.65$, Galileo number $\mathrm{Ga} = 51.9$, maximum Shields numbers from $5.60 \times 10^{-2}$ to $2.43 \times 10^{-1}$, based on smooth wall configuration, and Keulegan-Carpenter number from $134.5$ to $538.0$. We show that the dynamics of the oscillatory boundary layer and sediment bed are strongly coupled due to two mechanisms: (I) bed permeability, which leads to flow penetration deep inside the sediment layer, a slip velocity at the bed-fluid interface, and the expansion of the boundary layer, and (II) particle motion, which leads to rolling-grain ripples at $\mathrm{Re}_δ= 400$ and $\mathrm{Re}_δ= 800$. While at $\mathrm{Re}_δ= 200$ the sediment bed remains static during the entire cycle, the permeability of the bed-fluid interface causes a thickening of the boundary layer. With increasing $\mathrm{Re}_δ$, the particles become mobile, which leads to rolling-grain ripples at $\mathrm{Re}_δ= 400$ and suspended sediment at $\mathrm{Re}_δ= 800$. Due to their feedback force on the fluid, the mobile sediment particles cause greater velocity fluctuations in the fluid. Flow penetration causes a progressive alteration of the fluid velocity gradient near the bed interface, which reduces the Shields number based upon bed shear stress.

physics.flu-dyn↗

arXiv2024

Characterization of the forcing and sub-filter scale terms in the volume-filtering immersed boundary method

We present a characterization of the forcing and the sub-filter scale terms produced in the volume-filtering immersed boundary (VF-IB) method by Dave et al, JCP, 2023. The process of volume-filtering produces bodyforces in the form of surface integrals to describe the boundary conditions at the interface. Furthermore, the approach also produces unclosed subfilter scale (SFS) terms. The level of contribution from SFS terms on the numerical solution depends on the filter width. In order to understand these terms better, we take a 2 dimensional, varying coefficient hyperbolic equation shown by Brady & Liverscu, JCP, 2021. This case is chosen for two reasons. First, the case involves 2 distinct regions seperated by an interface, making it an ideal case for the VF-IB method. Second, an existing analytical solution allows us to properly investigate the contribution from SFS term for varying filter sizes. The latter controls how well resolved the interface is. The smaller the filter size, the more resolved the interface will be. A thorough numerical analysis of the method is presented, as well as the effect of the SFS term on the numerical solution. In order to perform a direct comparison, the numerical solution is compared to the filtered analytical solution. Through this, we highlight three important points. First, we present a methodical approach to volume filtering a hyperbolic PDE. Second, we show that the VF-IB method exhibits second order convergence with respect to decreasing filter size (i.e. making the interface sharper). Finally, we show that the SFS term scales with square the filter size. Large filter sizes require modeling the SFS term. However, for sufficiently finer filters, the SFS term can be ignored without any significant reduction in the accuracy of solution.

math.NA↗

arXiv2024

Turbulence modulation in dense liquid-solid channel flow

We investigate the mechanisms by which inertial solid particles modulate turbulence and alter the fluid mass transport in dense turbulent liquid-solid flows. To this end, we perform Euler-Lagrange simulations at friction Reynolds number 180, particle friction Stokes number 7.9, particle-to-fluid density ratio 8.9, and particle volume fraction ranging from 1% up to 12%. We show that the mechanisms underpinning the flow modulation are two fold: (I) the increase of the suspension's apparent kinematic viscosity with increasing solid volume fraction and (II) turbulence modulation through the particle feedback force. For solid volume fraction below 3%, the increase of the suspension's apparent kinematic viscosity by the disperse particles accounts for most of the flow modification, namely, the reduction of turbulent fluctuations, reduction of the bulk fluid velocity, and increase of friction coefficient. In denser channels, the particle feedback force leads to greater reduction of bulk fluid velocity and increase of friction coefficient than can be accounted for solely based on the increased apparent kinematic viscosity. In these cases, particle stress significantly alters the stress balance, to a point where it exceeds the Reynolds stress at solid volume fraction 12%.

physics.flu-dyn↗

arXiv2024

Instability of a dusty shear flow

We study the instability of a dusty simple shear flow where the dust particles are distributed non-uniformly. A simple shear flow is modally stable to infinitesimal perturbations. Also, a band of particles remains unaffected in the absence of any background flow. However, we demonstrate that the combined scenario -- comprising a simple shear flow with a localised band of particles -- can exhibit destabilisation due to their two-way interaction. The instability originates solely from the momentum feedback from the particle phase to the fluid phase. Eulerian-Lagrangian simulations are employed to illustrate the existence of this instability. Furthermore, the results are compared with a linear stability analysis of the system using an Eulerian-Eulerian model. Our findings indicate that the instability has an inviscid origin and is characterised by a critical wavelength below which it is not persistent. We have observed that increasing particle inertia dampens the unstable modes, whereas the strength of the instability increases with the strength of the coupling between the fluid and particle phases.

physics.flu-dyn↗

arXiv2024

A High-Fidelity Methodology for Particle-Resolved Direct Numerical Simulations

We present a novel computational method for direct numerical simulations of particle-laden flows with fully-resolved particles (PR-DNS). The method is based on the recently developed Volume-Filtering Immersed Boundary method [Dave et al, Journal of Computational Physics, 487:112136, 2023] derived by volume-filtering the transport equations. This approach is mathematically and physically rigorous, in contrast to other PR-DNS methods which rely on ad-hoc numerical schemes to impose no-slip boundary conditions on the surface of particles. With the present PR-DNS strategy, we show that the ratio of filter size to particle diameter acts as a parameter that controls the level of fidelity. In the limit where this ratio is very small, a well-resolved PR-DNS is obtained. Conversely, when the ratio of filter size to particle diameter is large, a classic point-particle method is obtained. The discretization of the filtered equations is discussed and compared to other PR-DNS strategies based on direct-forcing immersed boundary methods. Numerical examples with sedimenting resolved particles are discussed.

physics.flu-dyn↗

arXiv2023

The merger of co-rotating vortices in dusty flows

We investigate the effect of particle inertia on the merger of co-rotating dusty vortex pairs at semi-dilute concentrations. In a particle-free flow, the merger is triggered once the ratio of vortex core size to vortex separation reaches a critical value. The vortex pair separation then decreases monotonically until the two cores merge together. Using Eulerian-Lagrangian simulations of co-rotating particle-laden vortices, we show substantial departure from the vortex dynamics previously established in particle-free flows. Most strikingly, we find that disperse particles with moderate inertia cause the vortex pair to push apart to a separation nearly twice as large as the initial separation. During this stage, the drag force exerted by particles ejected out of the vortex cores on the fluid results in a net repulsive force that pushes the two cores apart. Eventually, the two dusty vortices merge into a single vortex with most particles accumulating outside the core similar to the dusty Lamb-Oseen vortex described in Shuai & Kasbaoui (J. Fluid Mech., vol 936, 2022, A8) For weakly inertial particles, we find that the merger dynamics follow the same mechanics as those of a single-phase flow, albeit with a density that must be adjusted to match the mixture density. For highly inertial particles, the feedback force exerted by the particles on the fluid may stretch the two cores during the merger to a point where each core splits into two, resulting in inner and outer vortex pairs. In this case, the merger occurs in two stages where the inner vortices merge first, followed by the outer ones.

physics.flu-dyn↗

arXiv2023

Mechanisms of drag reduction by semi-dilute inertial particles in turbulent channel flow

We investigate the mechanisms by which inertial particles dispersed at semi-dilute conditions cause significant drag-reduction in a turbulent channel flow at $\mathrm{Re}_τ= 180$. We consider a series of four-way coupled Euler-Lagrange simulations where particles having friction Stokes number $\mathrm{St}^+ = 6$ or 30 are introduced at progressively increasing mass loading from $M=0.2$ to 1.0. The simulations show that $\mathrm{St}^+ = 30$ particles cause large drag-reduction by up to 19.74\% at $M=1.0$, whereas $\mathrm{St}^+ = 6$ particles cause large drag increase by up to 16.92\% at $M=1.0$. To reveal the mechanisms underpinning drag-reduction or drag-increase, we investigate the stress distribution within the channel and the impact of the dispersed particles on the near-wall coherent structures. We find a distinctive feature of drag-reducing particles which consists in the formation of extremely long clusters, called ropes. These structures align preferentially with the low-speed streaks and contribute to their stabilization and suppression of bursting. Despite the additional stresses due to the particles, the modulation of the near-wall coherent structures leads to a greater reduction of Reynolds shear stresses and partial relaminarization of the near-wall flow. In the case of the drag-increasing particles with $\mathrm{St}^+ = 6$, a reduction in Reynolds shear stresses is also observed, however, this reduction is insufficient to overcome the additional particle stresses which leads to drag increase.

physics.flu-dyn↗

arXiv2023

The volume-filtering immersed boundary method

We present a novel framework to deal with static and moving immersed boundaries (IB). In this strategy, called Volume-Filtering Immersed Boundary (VFIB) method, transport equations are derived by filtering the Navier-Stokes equations and accounting for stresses at the solid-fluid interface. The result is that boundary conditions that normally apply on the interface are transformed into bodyforces that apply on the right-hand side of the filtered transport equations. The filter width acts as a parameter that controls the level of resolution. The IB is considered well-resolved if the filter width is much smaller than the characteristic corrugation scale of the interface. There are several innovations in this IB method. First, it sheds light on the role of the internal flow which arises when the transport equations are solved inside the IB. We show that, it is essential to separate stresses due to the external and internal fluids in order to get accurate forces and provide a method to do so. Second, we show that volumes associated with Lagrangian forcing points on the boundary depend on the local topology of the surface. We provide a method to compute these volumes using a triangle tessellation of the interface and the surface density function. Third, we provide an efficient procedure to compute the solid volume fraction, thus, enabling tagging interior/exterior cells. This volume fraction is also involved in the procedure to separate stresses due to the external fluid from the total stresses. Fourth, we show a path forward to extend the VFIB method to Large Eddy Simulations involving IBs. Lastly, we apply the VFIB in several numerical tests involving two- and three- dimensional static and moving IBs. We show greatly improved results compared to prior IB methods. Further, we test several filter kernels and show that, for well-resolved IBs, the choice of the kernel plays little role.

physics.flu-dyn↗

arXiv2022

Instability of a dusty vortex

We investigate the effect of inertial particles dispersed in a circular patch of finite radius on the stability of a two-dimensional Rankine vortex in semi-dilute dusty flows. Unlike the particle-free case where no unstable modes exist, we show that the feedback force from the particles triggers a novel instability. The mechanisms driving the instability are characterized using linear stability analysis for weakly inertial particles and further validated against Eulerian-Lagrangian simulations. We show that the particle-laden vortex is always unstable if the mass loading $M>0$. Surprisingly, even non-inertial particles destabilize the vortex by a mechanism analogous to the centrifugal Rayleigh-Taylor instability in radially stratified vortex with density jump. We identify a critical mass loading above which an eigenmode $m$ becomes unstable. This critical mass loading drops to zero as m increases. When particles are inertial, modes that fall below the critical mass loading become unstable, whereas, modes above it remain unstable but with lower growth rates compared to the non-inertial case. Comparison with Eulerian-Lagrangian simulations shows that growth rates computed from simulations match well the theoretical predictions. Past the linear stage, we observe the emergence of high-wavenumber modes that turn into spiraling arms of concentrated particles emanating out of the core, while regions of particle-free flow are sucked inward. The vorticity field displays similar pattern which lead to the breakdown of the initial Rankine structure. This novel instability for a dusty vortex highlights how the feedback force from the disperse phase can induce the breakdown of an otherwise resilient vortical structure.

physics.flu-dyn↗

arXiv2021

Direct Numerical Simulations of the Swirling von Karman Flow Using a Semi-implicit Moving Immersed Boundary Method

We present a novel moving immersed boundary method (IBM) and employ it in direct numerical simulations (DNS) of the closed-vessel swirling von Karman flow in laminar and turbulent regimes. The IBM extends direct-forcing approaches by leveraging a time integration scheme, that embeds the immersed boundary forcing step within a semi-implicit iterative Crank-Nicolson scheme. The overall method is robust, stable, and yields excellent results in canonical cases with static and moving boundaries. The moving IBM allows us to reproduce the geometry and parameters of the swirling von Karman flow experiments in (F. Ravelet, A. Chiffaudel, and F. Daviaud, JFM 601, 339 (2008)) on a Cartesian grid. In these DNS, the flow is driven by two-counter rotating impellers fitted with curved inertial stirrers. We analyze the transition from laminar to turbulent flow by increasing the rotation rate of the counter-rotating impellers to attain the four Reynolds numbers 90, 360, 2000, and 4000. In the laminar regime at Reynolds number 90 and 360, we observe flow features similar to those reported in the experiments and in particular, the appearance of a symmetry-breaking instability at Reynolds number 360. We observe transitional turbulence at Reynolds number 2000. Fully developed turbulence is achieved at Reynolds number 4000. Non-dimensional torque computed from simulations matches correlations from experimental data. The low Reynolds number symmetries, lost with increasing Reynolds number, are recovered in the mean flow in the fully developed turbulent regime, where we observe two tori symmetrical about the mid-height plane. We note that turbulent fluctuations in the central region of the device remain anisotropic even at the highest Reynolds number 4000, suggesting that isotropization requires significantly higher Reynolds numbers.

physics.flu-dyn↗