arXiv subjects

M. I. McMahon

Publications and source records attributed to M. I. McMahon.

7 recordsLinked to original sources

arXiv2026

Nanosecond timescale plasticity in shock-compressed polycrystalline MgO: evidence for transition in mechanism above 100 GPa

The mechanical properties of ceramics under extreme conditions directly impact applications ranging from shielding spacecrafts, designing plasma facing materials in nuclear fusion to understanding the rheology of deep planetary interiors. Here, we use polycrystalline MgO as a model ceramic to understand the high-pressure-temperature mechanical behaviour of such materials under extreme strain rates. We use laser-driven shock compression up to 175(15) GPa on the principal Hugoniot along with ultrafast diagnostics at the European X-ray Free Electron Laser to probe the dominant deformation mechanisms with changing P -T conditions. These near-instantaneous time-resolved snapshots, coupled with elasto-viscoplastic self-consistent (EVPSC) simulations, strongly suggest that MgO attains plastic regime in the nanoseconds scale accompanied by a pressure-mediated change in dominant slip system between 95 and 175 GPa. This work provides a new direct window into the deformation dynamics of polycrystalline ceramics under high-velocity impacts.

cond-mat.mtrl-sci↗

arXiv2026

Volume Collapse Without a Structural Transition in Shock-Compressed FeO

We report x-ray diffraction and emission spectroscopy of FeO under laser-driven shock compression between 31-199 GPa. FeO retains the B1 (rocksalt) structure along the Hugoniot to the melt boundary at 191 GPa. While the phase and volume are broadly consistent with results from static compression, we observe an anomalous 7-10% volume collapse around 60 GPa absent in static experiments. We identify this as an isostructural high-spin to low-spin metallic transition in FeO. The low-spin state is directly evidenced by x-ray emission spectroscopy at 180 GPa.

cond-mat.mtrl-sci↗

arXiv2019

Thermomechanical response of thickly tamped targets and diamond anvil cells under pulsed hard x-ray irradiation

In the laboratory study of extreme conditions of temperature and density, the exposure of matter to high intensity radiation sources has been of central importance. Here we interrogate the performance of multi-layered targets in experiments involving high intensity, hard x-ray irradiation, motivated by the advent of extremely high brightness hard x-ray sources, such as free electron lasers and 4th-generation synchrotron facilities. Intense hard x-ray beams can deliver significant energy in targets having thick x-ray transparent layers (tampers) around samples of interest, for the study of novel states of matter and materials' dynamics. Heated-state lifetimes in such targets can approach the microsecond level, regardless of radiation pulse duration, enabling the exploration of conditions of local thermal and thermodynamic equilibrium at extreme temperature in solid density matter. The thermal and mechanical response of such thick layered targets following x-ray heating, including hydrodynamic relaxation and heat flow on picosecond to millisecond timescales, is modelled using radiation hydrocode simulation, finite element analysis, and thermodynamic calculations. Assessing the potential for target survival over one or more exposures, and resistance to damage arising from heating and resulting mechanical stresses, this study doubles as an investigation into the performance of diamond-anvil high pressure cells under high x-ray fluences. Long used in conjunction with synchrotron x-ray radiation and high power optical lasers, the strong confinement afforded by such cells suggests novel applications at emerging high intensity x-ray facilities and new routes to studying thermodynamic equilibrium states of warm, very dense matter.

cond-mat.other↗

arXiv2018

High-pressure high-temperature phase diagram of zinc

The phase diagram of Zn has been explored up to 140 GPa and 6000 K, by combining optical observations, x-ray diffraction, and ab-initio calculations. In the pressure range covered by this study, Zn is found to retain a hexagonal close-packed crystal symmetry up to the melting temperature. The known decrease of the axial ratio of the hcp phase of Zn under compression is observed in x-ray diffraction experiments from 300 K up to the melting temperature. The pressure at which the axial ratio reaches the square root of 3 value, around 10 GPa, is slightly affected by temperature. When this axial ratio is reached, we observed that single crystals of Zn, formed at high temperature, break into multiple polycrystals. In addition, a noticeable change in the pressure dependence of the axial ratio takes place at the same pressure. Both phenomena could be caused by an isomorphic second-order phase transition induced by pressure in Zn. The reported melt curve extends previous results from 24 to 135 GPa. The pressure dependence obtained for the melting temperature is accurately described up to 135 GPa by using a Simon-Glatzel equation. The determined melt curve agrees with previous low-pressure studies and with shock-wave experiments, with a melting temperature of 5060 K at 135 GPa. Finally, a thermal equation of state is reported, which at room-temperature agrees with the literature.

cond-mat.mtrl-sci↗

arXiv2016

Thallium under extreme compression

We present a combined theoretical and experimental study of the high-pressure behavior of thallium. X-ray diffraction experiments have been carried out at room temperature up to 125 GPa using diamond-anvil cells, nearly doubling the pressure range of previous experiments. We have confirmed the hcp-fcc transition at 3.5 GPa and determined that the fcc structure remains stable up to the highest pressure attained in the experiments. In addition, HP-HT experiments have been performed up to 8 GPa and 700 K by using a combination of x-ray diffraction and a resistively heated diamond-anvil cell. Information on the phase boundaries is obtained, as well as crystallographic information on the HT bcc phase. The equation of state for different phases is reported. Ab initio calculations have also been carried out considering several potential high-pressure structures. They are consistent with the experimental results and predict that, among the structures considered in the calculations, the fcc structure of thallium is stable up to 4.3 TPa. Calculations also predict the post-fcc phase to have a close-packed orthorhombic structure above 4.3 TPa.

cond-mat.mtrl-sci↗

arXiv2016

Pressure dependence of the structure and electronic properties of Sr3Ir2O7

We study the structural evolution of Sr$_3$Ir$_2$O$_7$ as a function of pressure using x-ray diffraction. At a pressure of 54 GPa at room temperature, we observe a first-order structural phase transition, associated with a change from tetragonal to monoclinic symmetry, and accompanied by a 4% volume collapse. Rietveld refinement of the high-pressure phase reveals a novel modification of the Ruddlesden-Popper structure, which adopts an altered stacking sequence of the perovskite bilayers. As the positions of the oxygen atoms could not be reliably refined from the data, we use density functional theory (local-density approximation+$U$+spin orbit) to optimize the crystal structure, and to elucidate the electronic and magnetic properties of Sr$_3$Ir$_2$O$_7$ at high pressure. In the low-pressure tetragonal phase, we find that the in-plane rotation of the IrO$_6$ octahedra increases with pressure. The calculations further indicate that a bandwidth-driven insulator-metal transition occurs at $\sim$20 GPa, along with a quenching of the magnetic moment. In the high-pressure monoclinic phase, structural optimization resulted in complex tilting and rotation of the oxygen octahedra, and strongly overlapping $t_{2g}$ and $e_g$ bands. The $t_{2g}$ bandwidth renders both the spin-orbit coupling and electronic correlations ineffectual in opening an electronic gap, resulting in a robust metallic state for the high-pressure phase of Sr$_3$Ir$_2$O$_7$.

cond-mat.str-el↗

arXiv2012

The Structure of Eu-III

Previous x-ray diffraction studies have reported Eu to transform from the hcp structure to a new phase, Eu-III, at 18 GPa. Using x-ray powder diffraction we have determined that Eu remains hcp up to 33 GPa, and that the extra peaks that appear at 18 GPa are from an impurity phase with space group R-3c . Above 33 GPa the diffraction pattern becomes very much more complex, signalling a transition to a phase with a distorted hcp structure.

cond-mat.mtrl-sci↗