arXiv subjects

M. J. Caturla

Publications and source records attributed to M. J. Caturla.

11 recordsLinked to original sources

arXiv2022

Simulation of the Einstein-de Haas effect combining molecular and spin dynamics

The spin and lattice dynamics of a ferromagnetic nanoparticle are studied via molecular dynamics and with semi-classical spin dynamics simulations where spin and lattice degrees of freedom are coupled via a dynamic uniaxial anisotropy term. We show that this model conserves total angular momentum, whereas spin and lattice angular momentum are not conserved. We carry out simulations of the the Einstein-de Haas effect for a Fe nanocluster with more than 500 atoms that is free to rotate, using a modified version of the open-source spinlattice dynamics code (SPILADY). We show that the rate of angular momentum transfer between spin and lattice is proportional to the strength of the magnetic anisotropy interaction. The addition of the anisotropy allows full spin-lattice relaxation to be achieved on previously reported timescales of \sim 100 ps and for tight-binding magnetic anisotropy energies comparable to those of small Fe nanoclusters.

cond-mat.mtrl-sci↗

arXiv2019

Directional bonding explains high conductance values of atomic contacts in bcc metals

Atomic-sized junctions of iron, created by controlled rupture, present unusually high values of conductance compared to other metals. This result is counter-intuitive since, at the nanoscale, body-centered cubic metals are expected to exhibit lower coordination than face-centered cubic metals. In this work, classical molecular dynamics simulations of contact rupture, using an interatomic potential that accounts for directional bonding, yield highly-coordinated stable structures before rupture, unlike an isotropic bonding potential, which results in the expected stable single-atom contacts. Density functional theory electronic transport calculations show that conductance values of these highly coordinated and highly stable structures, can explain the experimentally measured values for conductance of body-centered cubic atomic contacts, thus revealing the important role of directional bonding in these metals.

cond-mat.mes-hall↗

arXiv2017

The role of first neighbors geometry in the electronic and mechanical properties of atomic contacts

We study in detail, by experimental measurements, atomistic simulations and DFT transport calculations, the process of formation and the resulting electronic properties of atomic-sized contacts made of Au, Ag and Cu. Our novel approaches to the data analysis of both experimental results and simulations, lead to a precise relationship between geometry and electronic transmission. We reestablish the significant influence of the number of first neighbors on the electronic properties of atomic-sized contacts. Our results allow us also to interpret subtle differences between the metals during the process of contact formation as well as the characteristics of the resulting contacts.

cond-mat.mes-hall↗

arXiv2017

Influence of relativistic effects on the contact formation of transition metals

Our analysis of the contact formation processes undergone by Au, Ag and Cu nanojunctions, reveals that the distance at which the two closest atoms on a pair of opposing electrodes jump into contact is, on average, two times longer for Au than either Ag or Cu. This suggests the existence of a longer range interaction between those two atoms in the case of Au, a result of the significant relativistic energy contributions to the electronic structure of this metal, as confirmed by ab initio calculations. Once in the contact regime, the differences between Au, Ag and Cu are subtle, and the conductance of single-atom contacts for metals of similar chemical valence is mostly determined by geometry and coordination.

cond-mat.mes-hall↗

arXiv2016

Local electroexfoliation of graphene with a STM tip

Graphite surfaces can be manipulated by several methods to create graphene structures of different shapes and sizes. Scanning tunneling microscopy (STM) can be used to create these structures either through mechanical contact between the tip and the surface or through electro-exfoliation. In the latter, the mechanisms involved in the process of exfoliation with an applied voltage are not fully understood. Here we show how a graphite surface can be locally exfoliated in a systematic manner by applying an electrostatic force with a STM tip at the edge of a terrace, forming triangular flakes several nanometers in length. We demonstrate, through experiments and simulations, how these flakes are created by a two-step process: first a voltage ramp must be applied at the edge of the terrace, and then the tip must be scanned perpendicularly to the edge. Ab-initio electrostatic calculations reveal that the presence of charges on the graphite surface weakens the interaction between layers allowing for exfoliation at voltages in the same range as those used experimentally. Molecular dynamics simulations show that a force applied locally on the edge of a step produces triangular flakes such as those observed under STM. Our results provide new insights towards surface modification that can be extended to other layered materials.

cond-mat.mes-hall↗

arXiv2015

A theoretical study of the dynamics of atomic hydrogen on graphene bilayers

We present a theoretical study of the dynamics of H atoms adsorbed on graphene bilayers with Bernal stacking. First, through extensive density functional theory calculations, including van der Waals interactions, we obtain the activation barriers involved in the desorption and migration processes of a single H atom. These barriers, along with attempt rates and the energetics of H pairs, are used as input parameters in kinetic Monte Carlo simulations to study the time evolution of an initial random distribution of adsorbed H atoms. The simulations reveal that, at room temperature, H atoms occupy only one sublattice before they completely desorb or form clusters. This sublattice selectivity in the distribution of H atoms may last for sufficiently long periods of time upon lowering the temperature down to 0 C. The final fate of the H atoms, namely, desorption or cluster formation, depends on the actual relative values of the activation barriers which can be tuned by doping. In some cases a sublattice selectivity can be obtained for periods of time experimentally relevant even at room temperature. This result shows the possibility for observation and applications of the ferromagnetic state associated with such distribution.

cond-mat.mes-hall↗

arXiv2015

Modeling contact formation between atomic-sized gold tips via molecular dynamics

The formation and rupture of atomic-sized contacts is modelled by means of molecular dynamics simulations. Such nano-contacts are realized in scanning tunnelling microscope and mechanically controlled break junction experiments. These instruments routinely measure the conductance across the nano-sized electrodes as they are brought into contact and separated, permitting conductance traces to be recorded that are plots of conductance versus the distance between the electrodes. One interesting feature of the conductance traces is that for some metals and geometric configurations a jump in the value of the conductance is observed right before contact between the electrodes, a phenomenon known as jump-to-contact. This paper considers, from a computational point of view, the dynamics of contact between two gold nano-electrodes. Repeated indentation of the two surfaces on each other is performed in two crystallographic orientations of face-centred cubic gold, namely (001) and (111). Ultimately, the intention is to identify the structures at the atomic level at the moment of first contact between the surfaces, since the value of the conductance is related to the minimum cross-section in the contact region. Conductance values obtained in this way are determined using first principles electronic transport calculations, with atomic configurations taken from the molecular dynamics simulations serving as input structures.

cond-mat.mes-hall↗

arXiv2013

Understanding the structure of the first atomic contact in Gold

We have studied experimentally the phenomena of jump-to-contact (JC) and jump-out-of-contact (JOC) in gold electrodes. JC can be observed at the first contact when the two metals approach each other while JOC occurs in the last contact before breaking. When the indentation depth between the electrodes is limited to a certain value of conductance, a highly reproducible behaviour in the evolution of the conductance can be obtained for hundreds of cycles of formation and rupture. Molecular dynamics simulations of this process show how the two metallic electrodes are shaped into tips of a well-defined crystallographic structure formed through a mechanical annealing mechanism. We report a detailed analysis of the atomic configurations obtained before contact and rupture of these stable structures and obtained their conductance using first-principlesquantum transport calculations. These results help us understand the values of conductance obtained experimentally in the JC and JOC phenomena and improve our understanding of atomic-sized contacts and the evolution of their structural characteristics.

cond-mat.mes-hall↗

arXiv2012

Mechanical annealing of metallic electrodes at the atomic scale

The process of creating an atomically defined and robust metallic tip is described and quantified using measurements of contact conductance between gold electrodes and numerical simulations. Our experiments show how the same conductance behavior can be obtained for hundreds of cycles of formation and rupture of the nanocontact by limiting the indentation depth between the two electrodes up to a conductance value of approximately $5G_{0}$ in the case of gold. This phenomenon is rationalized using molecular dynamics simulations together with density functional theory transport calculations which show how, after repeated indentations (mechanical annealing), the two metallic electrodes are shaped into tips of reproducible structure. These results provide a crucial insight into fundamental aspects relevant to nano-tribology or scanning probe microscopies.

cond-mat.mtrl-sci↗

arXiv2009

Mechanical, Electrical, and Magnetic Properties of Ni Nanocontacts

The dynamic deformation upon stretching of Ni nanowires as those formed with mechanically controllable break junctions or with a scanning tunneling microscope is studied both experimentally and theoretically. Molecular dynamics simulations of the breaking process are performed. In addition, and in order to compare with experiments, we also compute the transport properties in the last stages before failure using the first-principles implementation of Landauer's formalism included in our transport package ALACANT.

cond-mat.mes-hall↗

arXiv2006

Formation of a Metallic Contact: Jump to Contact Revisited

The transition from tunneling to metallic contact between two surfaces does not always involve a jump, but can be smooth. We have observed that the configuration and material composition of the electrodes before contact largely determines the presence or absence of a jump. Moreover, when jumps are found preferential values of conductance have been identified. Through combination of experiments, molecular dynamics, and first-principles transport calculations these conductance values are identified with atomic contacts of either monomers, dimers or double-bond contacts.

cond-mat.mes-hall↗