arXiv subjects

M. J. Griffin

Publications and source records attributed to M. J. Griffin.

34 records · Page 2Linked to original sources

arXiv2013

Flux calibration of the Herschel-SPIRE photometer

We describe the procedure used to flux calibrate the three-band submillimetre photometer in the Spectral and Photometric Imaging REceiver (SPIRE) instrument on the Herschel Space Observatory. This includes the equations describing the calibration scheme, a justification for using Neptune as the primary calibration source, a description of the observations and data processing procedures used to derive flux calibration parameters (for converting from voltage to flux density) for every bolometer in each array, an analysis of the error budget in the flux calibration for the individual bolometers, and tests of the flux calibration on observations of primary and secondary calibrators. The procedure for deriving the flux calibration parameters is divided into two parts. In the first part, we use observations of astronomical sources in conjunction with the operation of the photometer internal calibration source to derive the unscaled derivatives of the flux calibration curves. To scale the calibration curves in Jy/beam/V, we then use observations of Neptune in which the beam of each bolometer is mapped using Neptune observed in a very fine scan pattern. The total instrumental uncertainties in the flux calibration for the individual bolometers is ~0.5% for most bolometers, although a few bolometers have uncertainties of ~1-5% because of issues with the Neptune observations. Based on application of the flux calibration parameters to Neptune observations performed using typical scan map observing modes, we determined that measurements from each array as a whole have instrumental uncertainties of 1.5%. This is considerably less than the absolute calibration uncertainty associated with the model of Neptune, which is estimated at 4%.

astro-ph.IM↗

arXiv2013

First results from the Herschel Gould Belt Survey in Taurus

The whole of the Taurus region (a total area of 52 sq. deg.) has been observed by the Herschel SPIRE and PACS instruments at wavelengths of 70, 160, 250, 350 and 500 μm as part of the Herschel Gould Belt Survey. In this paper we present the first results from the part of the Taurus region that includes the Barnard 18 and L1536 clouds. A new source-finding routine, the Cardiff Source-finding AlgoRithm (CSAR), is introduced, which is loosely based on CLUMPFIND, but that also generates a structure tree, or dendrogram, which can be used to interpret hierarchical clump structure in a complex region. Sources were extracted from the data using the hierarchical version of CSAR and plotted on a mass-size diagram. We found a hierarchy of objects with sizes in the range 0.024-2.7 pc. Previous studies showed that gravitationally bound prestellar cores and unbound starless clumps appeared in different places on the mass-size diagram. However, it was unclear whether this was due to a lack of instrumental dynamic range or whether they were actually two distinct populations. The excellent sensitivity of Herschel shows that our sources fill the gap in the mass-size plane between starless and pre-stellar cores, and gives the first clear supporting observational evidence for the theory that unbound clumps and (gravitationally bound) prestellar cores are all part of the same population, and hence presumably part of the same evolutionary sequence (c.f. Simpson et al. 2011).

astro-ph.GA↗

arXiv2012

Isolated starless cores in IRDCs in the Hi-GAL survey

In a previous paper we identified cores within infrared dark clouds (IRDCs). We regarded those without embedded sources as the least evolved, and labelled them starless. Here we identify the most isolated starless cores and model them using a three-dimensional, multi-wavelength, Monte Carlo, radiative transfer code. We derive the cores' physical parameters and discuss the relation between the mass, temperature, density, size and the surrounding interstellar radiation field (ISRF) for the cores. The masses of the cores were found not to correlate with their radial size or central density. The temperature at the surface of a core was seen to depend almost entirely on the level of the ISRF surrounding the core. No correlation was found between the temperature at the centre of a core and its local ISRF. This was seen to depend, instead, on the density and mass of the core.

astro-ph.GA↗

arXiv2012

The M16 molecular complex under the influence of NGC6611. Herschel's perspective of the heating effect on the Eagle Nebula

We present Herschel images from the HOBYS key program of the Eagle Nebula (M16) in the far-infrared and sub-millimetre, using the PACS and SPIRE cameras at 70μm, 160μm, 250μm, 350μm, 500μm. M16, home to the Pillars of Creation, is largely under the influence of the nearby NGC6611 high-mass star cluster. The Herschel images reveal a clear dust temperature gradient running away from the centre of the cavity carved by the OB cluster. We investigate the heating effect of NGC6611 on the entire M16 star-forming complex seen by Herschel including the diffuse cloud environment and the dense filamentary structures identified in this region. In addition, we interpret the three-dimensional geometry of M16 with respect to the nebula, its surrounding environment, and the NGC6611 cavity. The dust temperature and column density maps reveal a prominent eastern filament running north-south and away from the high-mass star-forming central region and the NGC6611 cluster, as well as a northern filament which extends around and away from the cluster. The dust temperature in each of these filaments decreases with increasing distance from the NGC6611 cluster, indicating a heating penetration depth of \sim 10 pc in each direction in 3 - 6 \times 10^{22} cm-2 column density filaments. We show that in high-mass star-forming regions OB clusters impact the temperature of future star-forming sites, modifying the initial conditions for collapse and effecting the evolutionary criteria of protostars developed from spectral energy distributions. Possible scenarios for the origin of the morphology seen in this region are discussed, including a western equivalent to the eastern filament, which was destroyed by the creation of the OB cluster and its subsequent winds and radiation.

astro-ph.SR↗

arXiv2012

Cores in Infra-Red Dark Clouds (IRDCs) seen in the Hi-GAL survey between l = 300° and l = 330°

We have used data taken as part of the Herschel infrared Galactic Plane survey (Hi-GAL) to study 3171 infrared-dark cloud (IRDC) candidates that were identified in the mid-infrared (8 μm) by Spitzer (we refer to these as 'Spitzer-dark' regions). They all lie in the range l=300 - 330 \circ and |b| 6 1 \circ. Of these, only 1205 were seen in emission in the far-infrared (250-500 μm) by Herschel (we call these 'Herschel-bright' clouds). It is predicted that a dense cloud will not only be seen in absorption in the mid-infrared, but will also be seen in emission in the far-infrared at the longest Herschel wavebands (250-500 μm). If a region is dark at all wavelengths throughout the mid-infrared and far-infrared, then it is most likely to be simply a region of lower background infrared emission (a 'hole in the sky'). Hence, it appears that previous surveys, based on Spitzer and other mid-infrared data alone, may have over-estimated the total IRDC population by a factor of 2. This has implications for estimates of the star formation rate in IRDCs in the Galaxy.We studied the 1205 Herschel-bright IRDCs at 250 μm, and found that 972 of them had at least one clearly defined 250-μm peak, indicating that they contained one or more dense cores. Of these, 653 (67 per cent) contained an 8-μm point source somewhere within the cloud, 149 (15 per cent) contained a 24-μm point source but no 8-μm source, and 170 (18 per cent) contained no 24-μm or 8-μm point sources. We use these statistics to make inferences about the lifetimes of the various evolutionary stages of IRDCs.

astro-ph.GA↗

arXiv2011

EChO - Exoplanet Characterisation Observatory

A dedicated mission to investigate exoplanetary atmospheres represents a major milestone in our quest to understand our place in the universe by placing our Solar System in context and by addressing the suitability of planets for the presence of life. EChO -the Exoplanet Characterisation Observatory- is a mission concept specifically geared for this purpose. EChO will provide simultaneous, multi-wavelength spectroscopic observations on a stable platform that will allow very long exposures. EChO will build on observations by Hubble, Spitzer and groundbased telescopes, which discovered the first molecules and atoms in exoplanetary atmospheres. EChO will simultaneously observe a broad enough spectral region -from the visible to the mid-IR- to constrain from one single spectrum the temperature structure of the atmosphere and the abundances of the major molecular species. The spectral range and resolution are tailored to separate bands belonging to up to 30 molecules to retrieve the composition and temperature structure of planetary atmospheres. The target list for EChO includes planets ranging from Jupiter-sized with equilibrium temperatures Teq up to 2000 K, to those of a few Earth masses, with Teq ~300 K. We have baselined a dispersive spectrograph design covering continuously the 0.4-16 micron spectral range in 6 channels (1 in the VIS, 5 in the IR), which allows the spectral resolution to be adapted from several tens to several hundreds, depending on the target brightness. The instrument will be mounted behind a 1.5 m class telescope, passively cooled to 50 K, with the instrument structure and optics passively cooled to ~45 K. EChO will be placed in a grand halo orbit around L2. We have also undertaken a first-order cost and development plan analysis and find that EChO is easily compatible with the ESA M-class mission framework.

astro-ph.EP↗

arXiv2011

The Herschel view of massive star formation in G035.39--00.33: Dense and cold filament of W48 undergoing a mini-starburst

The filament IRDC G035.39--00.33 in the W48 molecular complex is one of the darkest infrared clouds observed by \textit{Spitzer}. It has been observed by the PACS (70 and 160\,$\micron$) and SPIRE (250, 350, and 500\,$\micron$) cameras of the \textit{Herschel} Space Observatory as part of the W48 molecular cloud complex in the framework of the HOBYS key programme. The observations reveal a sample of 28 compact sources (deconvolved FWHM sizes $<$0.3 pc) complete down to $\sim$$5 \msun$ in G035.39--00.33 and its surroundings. Among them, 13 compact sources are massive dense cores with masses $>$$20 \msun$. The cloud characteristics we derive from the analysis of their spectral energy distributions are masses of $20-50 \msun$, sizes of 0.1--0.2 pc, and average densities of $2-20 \times 10^{5} \cmc$, which make these massive dense cores excellent candidates to form intermediate- to high-mass stars. Most of the massive dense cores are located inside the G035.39--00.33 ridge and host IR-quiet high-mass protostars. The large number of protostars found in this filament suggests that we are witnessing a mini-burst of star formation with an efficiency of $\sim$15% and a rate density of $\sim$$40 \msun\,$yr$^{-1}\,$kpc$^{-2}$ within $\sim$8 pc$^2$, a large area covering the full ridge. Part of the extended SiO emission observed towards G035.39--00.33 is not associated with obvious protostars and may originate from low-velocity shocks within converging flows, as advocated by previous studies.

astro-ph.SR↗

arXiv2010

The Herschel-SPIRE instrument and its in-flight performance

The Spectral and Photometric Imaging Receiver (SPIRE), is the Herschel Space Observatory`s submillimetre camera and spectrometer. It contains a three-band imaging photometer operating at 250, 350 and 500 microns, and an imaging Fourier Transform Spectrometer (FTS) which covers simultaneously its whole operating range of 194-671 microns (447-1550 GHz). The SPIRE detectors are arrays of feedhorn-coupled bolometers cooled to 0.3 K. The photometer has a field of view of 4' x 8', observed simultaneously in the three spectral bands. Its main operating mode is scan-mapping, whereby the field of view is scanned across the sky to achieve full spatial sampling and to cover large areas if desired. The spectrometer has an approximately circular field of view with a diameter of 2.6'. The spectral resolution can be adjusted between 1.2 and 25 GHz by changing the stroke length of the FTS scan mirror. Its main operating mode involves a fixed telescope pointing with multiple scans of the FTS mirror to acquire spectral data. For extended source measurements, multiple position offsets are implemented by means of an internal beam steering mirror to achieve the desired spatial sampling and by rastering of the telescope pointing to map areas larger than the field of view. The SPIRE instrument consists of a cold focal plane unit located inside the Herschel cryostat and warm electronics units, located on the spacecraft Service Module, for instrument control and data handling. Science data are transmitted to Earth with no on-board data compression, and processed by automatic pipelines to produce calibrated science products. The in-flight performance of the instrument matches or exceeds predictions based on pre-launch testing and modelling: the photometer sensitivity is comparable to or slightly better than estimated pre-launch, and the spectrometer sensitivity is also better by a factor of 1.5-2.

astro-ph.IM↗

arXiv2010

The Herschel-SPIRE submillimetre spectrum of Mars

We have obtained the first continuous disk averaged spectrum of Mars from 450 to 1550 Ghz using the Herschel-SPIRE Fourier Transform Spectrometer. The spectrum was obtained at a constant resolution of 1.4 GHz across the whole band. The flux from the planet is such that the instrument was operated in "bright source" mode to prevent saturation of the detectors. This was the first successful use of this mode and in this work we describe the method used for observing Mars together with a detailed discussion of the data reduction techniques required to calibrate the spectrum. We discuss the calibration accuracy obtained and describe the first comparison with surface and atmospheric models. In addition to a direct photometric measurement of the planet the spectrum contains the characteristic transitions of 12CO from J 5-4 to J 13-12 as well as numerous H2O transitions. Together these allow the comparison to global atmospheric models allowing the mean mixing ratios of water and 12CO to be investigated. We find that it is possible to match the observed depth of the absorption features in the spectrum with a fixed water mixing ratio of 1 x 10-4 and a 12CO mixing ratio of 9 x 10-4

astro-ph.EP↗

arXiv2010

Clouds, filaments and protostars: the Herschel Hi-GAL Milky Way

We present the first results from the science demonstration phase for the Hi-GAL survey, the Herschel key-project that will map the inner Galactic Plane of the Milky Way in 5 bands. We outline our data reduction strategy and present some science highlights on the two observed 2° x 2° tiles approximately centered at l=30° and l=59°. The two regions are extremely rich in intense and highly structured extended emission which shows a widespread organization in filaments. Source SEDs can be built for hundreds of objects in the two fields, and physical parameters can be extracted, for a good fraction of them where the distance could be estimated. The compact sources (which we will call 'cores' in the following) are found for the most part to be associated with the filaments, and the relationship to the local beam-averaged column density of the filament itself shows that a core seems to appear when a threshold around A_V of about 1 is exceeded for the regions in the l=59° field; a A_V value between 5 and 10 is found for the l=30° field, likely due to the relatively larger distances of the sources. This outlines an exciting scenario where diffuse clouds first collapse into filaments, which later fragment to cores where the column density has reached a critical level. In spite of core L/M ratios being well in excess of a few for many sources, we find core surface densities between 0.03 and 0.5 g cm-2. Our results are in good agreement with recent MHD numerical simulations of filaments forming from large-scale converging flows.

astro-ph.GA↗

arXiv2010

The Aquila prestellar core population revealed by Herschel

The origin and possible universality of the stellar initial mass function (IMF) is a major issue in astrophysics. One of the main objectives of the Herschel Gould Belt Survey is to clarify the link between the prestellar core mass function (CMF) and the IMF. We present and discuss the core mass function derived from Herschel data for the large population of prestellar cores discovered with SPIRE and PACS in the Aquila Rift cloud complex at d ~ 260 pc. We detect a total of 541 starless cores in the entire ~11 deg^2 area of the field imaged at 70-500 micron with SPIRE/PACS. Most of these cores appear to be gravitationally bound, and thus prestellar in nature. Our Herschel results confirm that the shape of the prestellar CMF resembles the stellar IMF, with much higher quality statistics than earlier submillimeter continuum ground-based surveys.

astro-ph.SR↗

arXiv2006

Extragalactic Science with Herschel-SPIRE

SPIRE, the Spectral and Photometric Imaging Receiver, is one of three instruments to fly on ESA's Herschel Space Observatory. It contains a three-band imaging photometer operating at 250, 360 and 520 microns, and an imaging Fourier Transform Spectrometer (FTS) covering 200-670 microns. It will be used for many extragalactic science programmes, a number of which will be implemented as Herschel Key Projects. The SPIRE consortium's Guaranteed Time (GT) programme will devote more than 1000 hours to Key Projects covering the high-z universe and local galaxies. It is also expected that substantial amounts of Herschel Open Time will be used for further extragalactic investigations. The high-z part of the SPIRE GT programme will focus on blank-field surveys with a range of depths and areas optimised to sample the luminosity-redshift plane and characterise the bolometric luminosity density of the universe at high z. Fields will be selected that are well covered at other wavelengths to facilitate source identifications and enable detailed studies of the redshifts, spectral energy distributions, and infrared properties of detected galaxies. The local galaxies programme will include a detailed spectral and photometric study of a sample of well resolved nearby galaxies, a survey of more than 300 local galaxies designed to provide a statistical survey of dust in the nearby universe, and a study of the ISM in low-metallicity environments, bridging the gap between the local universe and primordial galaxies.

astro-ph↗

arXiv2006

Simulations of Deep Extra-galactic Surveys with Herschel-SPIRE

The SPIRE Photometer Simulator reproduces the entire Herschel-SPIRE system in a modular IDL program. Almost every aspect of the operation of SPIRE can be investigated in a systematic way to ensure that observations are performed in the most efficient way possible when Herschel flies. This paper describes some of the work done with the Simulator to help prepare for large observing programmes such as deep extra-galactic, high-redshift surveys.

astro-ph↗

arXiv2005

First ground-based 200-um observing with THUMPER on JCMT - sky characterisation and planet maps

We present observations that were carried out with the Two HUndred Micron PhotometER (THUMPER) mounted on the James Clerk Maxwell Telescope (JCMT) in Hawaii, at a wavelength of 200 um (frequency 1.5 THz). The observations utilise a small atmospheric window that opens up at this wavelength under very dry conditions at high-altitude observing sites. The atmosphere was calibrated using the sky-dipping method and a relation was established between the optical depth, tau, at 1.5 THz and that at 225 GHz: tau_1.5THz = (95 +/- 10)*tau_225GHz. Mars and Jupiter were mapped from the ground at this wavelength for the first time, and the system characteristics measured. A noise equivalent flux density (NEFD) of ~65 +/- 10 Jy (1 sigma 1 second) was measured for the THUMPER-JCMT combination, consistent with predictions based upon our laboratory measurements. The main-beam resolution of 14 arcsec was confirmed and an extended error-beam detected at roughly two-thirds of the magnitude of the main beam. Measurements of the Sun allow us to estimate that the fraction of the power in the main beam is ~15%, consistent with predictions based on modelling the dish surface accuracy. It is therefore shown that the sky over Mauna Kea is suitable for astronomy at this wavelength under the best conditions. However, higher or drier sites should have a larger number of useable nights per year.

astro-ph↗

arXiv2002

The Relative Performance of Filled and Feedhorn-Coupled Focal-plane Architectures

Modern far infrared and submillimeter instruments require large format arrays. We consider the relative performance of filled array (bare pixel) and feedhorn-coupled architectures for bolometer focal planes. Based on typical array parameters, we quantify the relative observing speeds and comment on the merits of the different architectures. Filled arrays can provide higher mapping speed (by a factor of up to 3.5) and simpler observing modes at the expense of reduced sensitivity for pointed observations, increased detector numbers, and greater vulnerability to stray light and electromagnetic interference. Taking advantage of the filled array architecture requires strongly background limited detectors. At millimeter wavelengths, filled arrays must be surrounded by a sufficiently cold enclosure to minimize the background power from the instrument itself.

astro-ph↗

arXiv1998

SCUBA: A common-user submillimetre camera operating on the James Clerk Maxwell Telescope

SCUBA, the Submillimetre Common-User Bolometer Array, built by the Royal Observatory Edinburgh for the James Clerk Maxwell Telescope, is the most versatile and powerful of a new generation of submillimetre cameras. It combines a sensitive dual-waveband imaging array with a three-band photometer, and is sky-background limited by the emission from the Mauna Kea atmosphere at all observing wavelengths from 350 microns to 2 mm. The increased sensitivity and array size mean that SCUBA maps close to 10,000 times faster than its single-pixel predecessor (UKT14). SCUBA is a facility instrument, open to the world community of users, and is provided with a high level of user support. We give an overview of the instrument, describe the observing modes and user interface, performance figures on the telescope, and present a sample of the exciting new results that have revolutionised submillimetre astronomy.

astro-ph↗