arXiv subjects

M. Karlický

Publications and source records attributed to M. Karlický.

12 recordsLinked to original sources

arXiv2026

Failed ejection and oscillations of a current-carrying filament balanced by gravity

In this study, we investigate the post-destabilization evolution of a filament in a gravity-balanced model. We adopt the filament model proposed by Solov'ev (2010), in which a dense filament is supported against gravity by the repulsive force between the filament current and its sub-photospheric image. We first performed an analytical investigation of this model. For the numerical study, we use a two-dimensional magnetohydrodynamic (MHD) model that solves the MHD equations with the Lare2d numerical code. Results: In this filament model, analytical expressions are derived for the electric current density, plasma density, and their spatial distributions as functions of the model parameters. The total electric current and the filament weight are also calculated. For the numerical simulations, we constructed an equilibrium filament characterized by a magnetic field of $B_0$ = $10^{-3}$ T, mass density $ρ_0$ ~ 1.3 x $10^{-9}$ kg m$^{-3}$, and temperature T ~ 13000 K. The system was destabilized either by increasing the currents or by reducing the filament density, and its evolution was computed. In both destabilization regimes, the filament was ejected, then halted at a certain altitude, and subsequently fell back, repeating this cycle with a period of about 600 s. The maximum filament ejection velocity was approximately 80 and 40 km $s^{-1}$, respectively. Beneath the ejected filament a current sheet forms, where magnetic reconnection occurs. The maximum ejection altitudes were determined as functions of both the destabilizing currents and the degree of filament plasma dilution. Finally, we compared results of this MHD model with those of an ideal vacuum model and discussed all results.

astro-ph.SR↗

arXiv2024

Particle-in-cell simulations of electron-positron cyclotron maser forming pulsar radio zebras

The microwave radio dynamic spectra of the Crab pulsar interpulse contain fine structures represented via narrowband quasiharmonic stripes. The pattern significantly constrains any potential emission mechanism. Similar to the zebra patterns observed, for example, in type IV solar radio bursts or decameter and kilometer Jupiter radio emission, the double plasma resonance (DPR) effect of the cyclotron maser instability may allow for interpretion of observations of pulsar radio zebras. We present electromagnetic relativistic particle-in-cell (PIC) simulations of the electron-positron cyclotron maser for cyclotron frequency smaller than the plasma frequency. In four distinct simulation cycles, we focused on the effects of varying the plasma parameters on the instability growth rate and saturation energy. The physical parameters were the ratio between the plasma and cyclotron frequency, the density ratio of the "hot" loss-cone to the "cold" background plasma, the loss-cone characteristic velocity, and comparison with electron-proton plasma. In contrast to the results obtained from electron-proton plasma simulations, we find that the pulsar electron-positron maser instability does not generate distinguishable X and Z modes. On the contrary, a singular electromagnetic XZ mode was generated in all studied configurations close to or above the plasma frequency. For low density ratios, the highest peak of the XZ mode is at double the frequency of the highest peak of the Bernstein modes, indicating that the radio emission is produced by a coalescence of two Bernstein modes with the same frequency and opposite wave numbers. Our estimate of the radiative flux generated from the simulation is up to $\sim$30 mJy from an area of 100 km$^2$ for an observer at 1 kpc distance without the inclusion of relativistic beaming effects, which may account for multiple orders of magnitude.

astro-ph.HE↗

arXiv2019

Pulse-beam heating of deep atmospheric layers triggering their oscillations and upwards moving shocks that can modulate the reconnection in solar flares

We study processes occurring after a sudden heating of the chromosphere at the flare arcade footpoints which is assumed to be caused by particle beams. For the numerical simulations we adopt a 2-D magnetohydrodynamic (MHD) model, in which we solve a full set of the time-dependent MHD equations by means of the FLASH code, using the Adaptive Mesh Refinement (AMR) method. In the initial state we consider a model of the solar atmosphere with densities according to the VAL-C model and the magnetic field arcade having the X-point structure above, where the magnetic reconnection is assumed. We found that the sudden pulse-beam heating of the chromosphere at the flare arcade footpoints generates magnetohydrodynamic shocks, one propagating upwards and the second one propagating downwards in the solar atmosphere. The downward moving shock is reflected at deep and dense atmospheric layers and triggers oscillations of these layers. These oscillations generate the upwards moving magnetohydrodynamic waves that can influence the above located magnetic reconnection in a quasi-periodic way. Because these processes require a sudden heating in very localized regions in the chromosphere therefore they can be also associated with seismic waves.

astro-ph.SR↗

arXiv2017

Oscillations excited by plasmoids formed during magnetic reconnection in vertical gravitationally stratified current-sheet

Using the FLASH code, which solves the full set of the two-dimensional (2-D) non-ideal (resistive) time-dependent magnetohydrodynamic (MHD) equations, we study processes during the magnetic reconnection in a vertical gravitationally stratified current sheet. We show that during these processes, which correspond to processes in solar flares, plasmoids are formed due to the tearing mode instability of the current sheet. These plasmoids move upwards or downwards along the vertical current sheet, and some of them merge into larger plasmoids. We study the density and temperature structure of these plasmoids and their time evolution in details. We found that during the merging of two plasmoids the resulting larger plasmoid starts to oscillate; in our model with a $\sim 25~\mathrm{s}$ period. On the other hand, the plasmoid moving downwards merges with the underlying flare arcade which also starts to oscillate during this process; in our model with a $\sim 35~\mathrm{s}$ period. It is shown that the merging process of plasmoid with the flare arcade is a complex process as presented by complex density and temperature structures of the oscillating arcade. Moreover, all these processes are associated with magnetoacoustic waves produced by the motion and merging of plasmoids.

astro-ph.SR↗

arXiv2014

Sunspot waves and flare energy release

We address a possibility of the flare process initiation and further maintenance of its energy release due to a transformation of sunspot longitudinal waves into transverse magnetic loop oscillations with initiation of reconnection. This leads to heating maintaining after the energy release peak and formation of a flat stage on the X-ray profile. We applied the time-distance plots and pixel wavelet filtration (PWF) methods to obtain spatio-temporal distribution of wave power variations in SDO/AIA data. To find magnetic waveguides, we used magnetic field extrapolation of SDO/HMI magnetograms. The propagation velocity of wave fronts was measured from their spatial locations at specific times. In correlation curves of the 17 GHz (NoRH) radio emission we found a monotonous energy amplification of 3-min waves in the sunspot umbra before the 2012 June 7 flare. This dynamics agrees with an increase in the wave-train length in coronal loops (SDO/AIA, 171 Å) reaching the maximum 30 minutes prior to the flare onset. A peculiarity of this flare time profile in soft X-rays (RHESSI, 3-25 keV) is maintaining the constant level of the flare emission for 10 minutes after the short impulse phase, which indicates at the energy release continuation. Throughout this time, we found 30-sec period transverse oscillations of the flare loop in the radio-frequency range (NoRH, 17 GHz). This periodicity is apparently related to the transformation of propagating longitudinal 3-min waves from the sunspot into the loop transverse oscillations. The magnetic field extrapolation showed the existence of the magnetic waveguide (loop) connecting the sunspot with the energy release region. A flare loop heating can be caused by the interaction (reconnections) of this transversally oscillating waveguide with the underlying twisted loops.

astro-ph.SR↗

arXiv2014

Modifications of thick-target model: re-acceleration of electron beams by static and stochastic electric fields

We study two modifications of the collisional thick-target model (CTTM) based on the global and local re-acceleration of non-thermal electrons by static and stochastic electric fields during their transport from the coronal acceleration site to the thick-target region in the chromosphere. We concentrate on a comparison of the non-thermal electron distribution functions, chromospheric energy deposits, and HXR spectra obtained for both considered modifications with the CTTM itself. The results were obtained using a relativistic test-particle approach. We simulated the transport of non-thermal electrons with a power-law spectrum including the influence of scattering, energy losses, magnetic mirroring, and also the effects of the electric fields corresponding to both modifications of the CTTM. We show that both modifications of the CTTM change the outcome of the chromospheric bombardment in several aspects. The modifications lead to an increase in chromospheric energy deposit, change of its spatial distribution, and a substantial increase in the corresponding HXR spectrum intensity.

astro-ph.SR↗

arXiv2012

Radio fiber bursts and fast magnetoacoustic wave trains

We present a model for dm-fiber bursts that is based on assuming fast sausage magnetoacoustic wave trains that propagate along a dense vertical filament or current sheet. Eight groups of dm-fiber bursts that were observed during solar flares were selected and analyzed by the wavelet analysis method. To model these fiber bursts we built a semi-empirical model. We also did magnetohydrodynamic simulations of a propagation of the magnetoacoustic wave train in a vertical and gravitationally stratified current sheet. In the wavelet spectra of the fiber bursts computed at different radio frequencies we found the wavelet tadpoles, whose head maxima have the same frequency drift as the drift of fiber bursts. It indicates that the drift of these fiber bursts can be explained by the propagating fast sausage magnetoacoustic wave train. Using new semi-empirical and magnetohydrodynamic models with a simple radio emission model we generated the artificial radio spectra of the fiber bursts, which are similar to the observed ones.

astro-ph.SR↗

arXiv2011

Successive merging of plasmoids and fragmentation in flare current sheet and their X-ray and radio signatures

Based on our recent MHD simulations, first, a concept of the successive merging of plasmoids and fragmentation in the current sheet in the standard flare model is presented. Then, using a 2.5-D electromagnetic particle-in-cell model with free boundary conditions, these processes were modelled on the kinetic level of plasma description. We recognized the plasmoids which mutually interacted and finally merged into one large plasmoid. Between interacting plasmoids further plasmoids and current sheets on smaller and smaller spatial scales were formed in agreement with the fragmentation found in MHD simulations. During interactions (merging - coalescences) of the plasmoids the electrons were very efficiently accelerated and heated. We found that after a series of such merging processes the electrons in some regions reached the energies relevant for the emission in the hard X-ray range. Considering these energetic electrons and assuming the plasma density 10^9-10^10 cm^{-3} and the source volume as in the December 31, 2007 flare (Krucker at al. 2010, ApJ 714, 1108), we computed the X-ray spectra as produced by the bremsstrahlung emission process. Comparing these spectra with observations, we think that these processes can explain the observed above-the-loop-top hard X-ray sources. Furthermore, we show that the process of a fragmentation between two merging plasmoids can generate the narrowband dm-spikes. Formulas for schematic fractal reconnection structures were derived. Finally, the results were discussed.

astro-ph.SR↗

arXiv2010

Reconnection of a kinking flux rope triggering the ejection of a microwave and hard X-ray source. I. Observations and Interpretation

Imaging microwave observations of an eruptive, partially occulted solar flare on 18 April 2001 suggest that the global structure of the event can be described by the helical kink instability of a twisted magnetic flux rope. This model is suggested by the inverse gamma shape of the source exhibiting crossing legs of a rising flux loop and by evidence that the legs interact at or near the crossing point. The interaction is reflected by the location of peak brightness near the crossing point and by the formation of superimposed compact nonthermal sources most likely at or near the crossing point. These sources propagate upward along both legs, merge into a single, bright source at the top of the structure, and continue to rise at a velocity $>\!1000$~km\,s$^{-1}$. The compact sources trap accelerated electrons which radiate in the radio and hard X-ray ranges. This suggests that they are plasmoids, although their internal structure is not revealed by the data. They exhibit variations of the radio brightness temperature at a characteristic time scale of $\sim\!40$~s, anti-correlated to their area, which also support their interpretation as plasmoids. Their propagation path differs from the standard scenario of plasmoid formation and propagation in the flare current sheet, suggesting the helical current sheet formed by the instability instead.

astro-ph.SR↗

arXiv2010

Reconnection of a kinking flux rope triggering the ejection of a microwave and hard X-ray source. II. Numerical Modeling

Numerical simulations of the helical ($m\!=\!1$) kink instability of an arched, line-tied flux rope demonstrate that the helical deformation enforces reconnection between the legs of the rope if modes with two helical turns are dominant as a result of high initial twist in the range $Φ\gtrsim6π$. Such reconnection is complex, involving also the ambient field. In addition to breaking up the original rope, it can form a new, low-lying, less twisted flux rope. The new flux rope is pushed downward by the reconnection outflow, which typically forces it to break as well by reconnecting with the ambient field. The top part of the original rope, largely rooted in the sources of the ambient flux after the break-up, can fully erupt or be halted at low heights, producing a "failed eruption." The helical current sheet associated with the instability is squeezed between the approaching legs, temporarily forming a double current sheet. The leg-leg reconnection proceeds at a high rate, producing sufficiently strong electric fields that it would be able to accelerate particles. It may also form plasmoids, or plasmoid-like structures, which trap energetic particles and propagate out of the reconnection region up to the top of the erupting flux rope along the helical current sheet. The kinking of a highly twisted flux rope involving leg-leg reconnection can explain key features of an eruptive but partially occulted solar flare on 18 April 2001, which ejected a relatively compact hard X-ray and microwave source and was associated with a fast coronal mass ejection.

astro-ph.SR↗

arXiv2009

Far-IR and radio thermal continua in solar flares

With the invention of new far-infrared (FIR) and radio mm and sub-mm instruments (DESIR on SMESE satellite, ESO-ALMA), there is a growing interest in observations and analysis of solar flares in this so far unexplored wavelength region. Two principal radiation mechanisms play a role: the synchrotron emission due to accelerated particle beams moving in the magnetic field and the thermal emission due to the energy deposit in the lower atmospheric layers. In this contribution we explore the time-dependent effects of beams on thermal FIR and radio continua. We show how and where these continua are formed in the presence of time dependent beam heating and non-thermal excitation/ionisation of the chromospheric hydrogen plasma.

astro-ph.SR↗

arXiv2007

Electron acceleration in a post-flare decimetric continuum source

Aims: To calculate the power budget for electron acceleration and the efficiency of the plasma emission mechanism in a post-flare decimetric continuum source. Methods: We have imaged a high brightness temperature ($\sim 10^{9}$K) post-flare source at 1060 MHz with the Giant Metrewave Radio Telescope (GMRT). We use information from these images and the dynamic spectrum from the Hiraiso spectrograph together with the theoretical method described in Subramanian & Becker (2006) to calculate the power input to the electron acceleration process. The method assumes that the electrons are accelerated via a second-order Fermi acceleration mechanism. Results: We find that the power input to the nonthermal electrons is in the range $3\times 10^{25}$--$10^{26}$ erg/s. The efficiency of the overall plasma emission process starting from electron acceleration and culminating in the observed emission could range from $2.87\times 10^{-9}$ to $2.38 \times 10^{-8}$.

astro-ph↗