arXiv subjects

M. Kong

Publications and source records attributed to M. Kong.

11 recordsLinked to original sources

arXiv2026

3D modelling of thermal loads during unmitigated vertical displacement events in ITER and JET

Predicting three-dimensional thermal loads during tokamak disruptions is essential for ITER yet remains weakly developed. We present a physics-based workflow that couples MHD simulations of vertical displacement events with field line tracing on a realistic 3D first wall model and a transient wall thermal response. The approach is validated against JET discharges with beryllium main chamber armour, reproducing key global dynamics, non-axisymmetric current features, and the occurrence (or absence) of melting, thereby building confidence in the methodology. We then apply the same workflow to ITER-relevant conditions with tungsten (W) armour, consistent with the new 2024 ITER re-baseline, to assess disruption heat loads and their 3D localization. The resulting analysis demonstrates the resilience of the ITER W first wall against these events and provides predictions for the energy deposition and current flow profiles. Beyond these studies, the workflow enables scenario-by-scenario estimates of disruption-induced thermal loading, allowing to assess the disruption-budget consumption for these events in future devices.

physics.plasm-ph↗

arXiv2025

Numerical model for pellet rocket acceleration in PELOTON

A direct numerical simulation model for the rocket acceleration of pellets in thermonuclear fusion devices has been developed for PELOTON, a 3D Lagrangian particle pellet code [R. Samulyak et al, Nuclear Fusion 61 (4), 046007 (2021)], and validated using shattered pellet injection (SPI) experiments in JET. The pellet rocket acceleration is driven by grad-B drift of the ablation cloud that creates asymmetry and non-uniform heating of the cloud. The model accounts for non-uniform charging of the ablation cloud by hot plasma electrons as well as local plasma gradients. The increased pressure on the high-field-side compared to the low-field-side leads to pellet (fragment) rocket acceleration. Pure deuterium and deuterium-neon mixture models have been implemented. The background plasma states have been obtained by using a new plasma cooling model for PELOTON. The cooling model distributes the ablated material within the corresponding flux volumes and accounts for ionization and other energy losses, Ohmic heating by toroidal currents, and the energy exchange between ions and electrons. Plasma profiles predicted by PELOTON cooling model have been compared with JOREK and INDEX simulations. PELOTON simulations of rocket acceleration and the corresponding trajectories of deuterium fragments are consistent with experimentally measured trajectories in JET. We show that composite deuterium-neon pellets containing 0.5% of neon experienced smaller deviation of their trajectories compared to the pure deuterium case. We simulate various spatial configurations of pellet fragments and demonstrate the cloud overlap impact on rocket acceleration. Additionally, we demonstrate the effect of plasma state gradients on the rocket acceleration. Future work will focus on the rocket acceleration of SPI in projected ITER plasmas and the development of the corresponding scaling law for the rocket acceleration.

physics.plasm-ph↗

arXiv2025

Seeing the Outer Edge of the Infant Type Ia Supernova 2024epr in the Optical and Near Infrared

We present optical-to-near-infrared (NIR) photometry and spectroscopy of the Type Ia supernova (SN Ia) 2024epr, including NIR spectra observed within two days of first light. The early-time optical spectra show strong, high-velocity Ca and Si features near rarely-observed velocities at $\sim$0.1$c$, and the NIR spectra show a C I "knee." Despite early-time, high-velocity features, SN 2024epr evolves into a normal SN Ia, albeit with stronger peak-light Ca absorption than other SNe Ia with the same light curve shape. Although we infer a normal decline rate, $\Delta m_{15}(B)=1.09\pm0.12$ mag, from the light-curve rise, SN 2024epr is a Branch "cool" object and has red early-time colors ($g-r\approx0.15$ mag at $-10$ days). The high velocities point to a density enhancement in the outer layers of the explosion, predicted by some models, but thick-shell He-detonation models do not match the smoothly rising light curve or apparent lack of He in our early-time NIR spectra. No current models (e.g., delayed detonation or thin He shell double detonation) appear to reproduce all observed properties, particularly the unusual early-time colors. Such constraints are only possible for SN 2024epr from the earliest optical and NIR observations, highlighting their importance for constraining SN Ia models. Finally, we identify several literature SNe Ia with intermediate mass elements at $\sim$30\,000 km s$^{-1}$ within days after the explosion that evolve into otherwise normal SNe Ia at peak light, suggesting the early-time spectra of SNe Ia may hide a broad diversity of observational characteristics.

astro-ph.HE↗

arXiv2024

3D MHD modelling of plasmoid drift following massive material injection in a tokamak

Mechanisms of plasmoid drift following massive material injection are studied via 3D non-linear MHD modelling with the JOREK code, using a transient neutral source deposited at the low field side midplane of a JET H-mode plasma to clarify basic processes and compare with existing theories. The simulations confirm the important role of the propagation of shear Alfv\'en wave (SAW) packets from both ends of the plasmoid (``SAW braking'') and the development of external resistive currents along magnetic field lines (``P\'egouri\'e braking'') in limiting charge separation and thus the $\mathbf{E}\times \mathbf{B}$ plasmoid drift, where $\mathbf{E}$ and $\mathbf{B}$ are the electric and magnetic fields, respectively. The drift velocity is found to be limited by the SAW braking on the few microseconds timescale for cases with relatively small source amplitude while the P\'egouri\'e braking acting on a longer timescale is shown to set in earlier with larger toroidal extent of the source, both in good agreement with existing theories. The simulations also identify the key role of the size of the $\mathbf{E}\times \mathbf{B}$ flow region on plasmoid drift and show that the saturated velocity caused by dominant SAW braking agrees well with theory when considering an effective pressure within the $\mathbf{E}\times \mathbf{B}$ flow region. The existence of SAWs in the simulations is demonstrated and the 3D picture of plasmoid drift is discussed.

physics.plasm-ph↗

arXiv2024

Plasmoid drift and first wall heat deposition during ITER H-mode dual-SPIs in JOREK simulations

The heat flux mitigation during the Thermal Quench (TQ) by the Shattered Pellet Injection (SPI) is one of the major elements of disruption mitigation strategy for ITER. It's efficiency greatly depends on the SPI and the target plasma, and is ultimately checked by the heat deposition on to the PFCs. To investigate this, JOREK simulations of neon-mixed dual-SPIs into ITER baseline H-mode and a "degraded H-mode" with and without good injector synchronization are performed with focus on the first wall heat flux and its energy impact. It is found that low neon fraction SPIs into the baseline H-mode plasmas exhibit strong major radial plasmoid drift as the fragments arrive at the pedestal, accompanied by edge stochasticity. Significant density expulsion and outgoing heat flux occurs as a result, reducing the mitigation efficiency. Such drift motion could be mitigated by injecting higher neon fraction pellets', or by considering the pre-disruption confinement degradation, thus improving the radiation fraction. The radiation heat flux is found to peak in the vicinity of the fragment injection location in the early injection phase, while it relaxes later on due to parallel impurity transport. The overall radiation asymmetry could be significantly mitigated by good synchronization. Time integration of the local heat flux is carried out to provide its energy impact for wall heat damage assessment. For the baseline H-mode case with full pellet injection, melting of the stainless steel of the diagnostic port could occur near the injection port, which is acceptable, without any melting of the first wall tungsten tiles. For the degraded H-mode cases with quarter-pellet SPIs, which have 1/4 total volume of a full pellet, the maximum energy impact approaches the tolerable limit of the stainless steel with un-synchronized SPIs, and stays well below such limit for the perfectly synchronized ones.

physics.plasm-ph↗

arXiv2024

Spectroscopic observations of progenitor activity 100 days before a Type Ibn supernova

Obtaining spectroscopic observations of the progenitors of core-collapse supernovae is often unfeasible due to an inherent lack of knowledge as to which stars will go supernova and when they will explode. In this letter, we present photometric and spectroscopic observations of the progenitor activity of SN 2023fyq in the preceding 150 days before the He-rich progenitor exploded as a Type Ibn supernova. The progenitor of SN 2023fyq shows an exponential rise in flux prior to core-collapse. Complex He I emission line features are observed, with a P-Cygni like profile, as well as an evolving broad base with velocities on the order of 10,000 km/s, possibly due to electron scattering. The luminosity and evolution of SN 2023fyq are consistent with a faint Type Ibn, reaching a peak r-band magnitude of 18.1 mag, although there is some uncertainty in the distance to the host, NGC 4388, located in the Virgo cluster. We present additional evidence of asymmetric He-rich material being present prior to the explosion of SN 2023fyq, as well as after, suggesting this material has survived the ejecta-CSM interaction. Broad [O I] and the Ca II triplet lines are observed at late phases, confirming that SN 2023fyq was a genuine supernova rather than a non-terminal interacting transient. SN 2023fyq provides insight into the final moments of a massive star's life, highlighting that the progenitor is likely highly unstable before core-collapse.

astro-ph.HE↗

arXiv2022

Real-time Data Ingestion at the Keck Observatory Archive (KOA)

Since February of this year, KOA began to prepare, transfer, and ingest data as they were acquired in near-real time; in most cases data are available to observers through KOA within one minute of acquisition. Real-time ingestion will be complete for all active instruments by the end of Summer 2022. The observatory is supporting the development of modern Python data reduction pipelines, which when delivered, will automatically create science-ready data sets at the end of each night for ingestion into the archive. This presentation will describe the infrastructure developed to support real-time data ingestion, itself part of a larger initiative at the Observatory to modernize end-to-end operations. During telescope operations, the software at WMKO is executed automatically when a newly acquired file is recognized through monitoring a keyword-based observatory control system; this system is used at Keck to execute virtually all observatory functions. The monitor uses callbacks built into the control system to begin data preparation of files for transmission to the archive on an individual basis: scheduling scripts or file system related triggers are unnecessary. An HTTP-based system called from the Flask micro-framework enables file transfers between WMKO and NExScI and triggers data ingestion at NExScI. The ingestion system at NEXScI is a compact (4 KLOC), highly fault-tolerant, Python-based system. It uses a shared file system to transfer data from WMKO to NExScI. The ingestion code is instrument agnostic, with instrument parameters read from configuration files. It replaces an unwieldy (50 KLOC) C-based system that had been in use since 2004.

astro-ph.IM↗

arXiv2014

Metadata and Data Management for the Keck Observatory Archive

A collaboration between the W. M. Keck Observatory (WMKO) in Hawaii and the NASA Exoplanet Science Institute (NExScI) in California, the Keck Observatory Archive (KOA) was commissioned in 2004 to archive observing data from WMKO, which operates two classically scheduled 10 m ground-based telescopes. The observing data from Keck is not suitable for direct ingestion into the archive since the metadata contained in the original FITS headers lack the information necessary for proper archiving. Coupled with different standards among instrument builders and the heterogeneous nature of the data inherent in classical observing, in which observers have complete control of the instruments and their observations, the data pose a number of technical challenges for KOA. We describe the methodologies and tools that we have developed to successfully address these difficulties, adding content to the FITS headers and "retrofitting" the metadata in order to support archiving Keck data, especially those obtained before the archive was designed. With the expertise gained from having successfully archived observations taken with all eight currently active instruments at WMKO, we have developed lessons learned from handling this complex array of heterogeneous metadata that help ensure a smooth ingestion of data not only for current but also future instruments, as well as a better experience for the archive user.

astro-ph.IM↗

arXiv2012

Using self-driven microswimmers for particle separation

Microscopic self-propelled swimmers capable of autonomous navigation through complex environments provide appealing opportunities for localization, pick-up and delivery of micro-and nanoscopic objects. Inspired by motile cells and bacteria, man-made microswimmers have been fabricated, and their motion in patterned surroundings has been experimentally studied. We propose to use self-driven artificial microswimmers for separation of binary mixtures of colloids. We revealed different regimes of separation including one with a velocity inversion. Our finding could be of use for various biological and medical applications.

cond-mat.soft↗

arXiv2009

The NASA/IPAC/NExScI Star and Exoplanet Database

The NASA/IPAC/NExScI Star and Exoplanet Database (NStED) is a general purpose stellar archive which supports NASA planet-finding and planet-characterization goals, stellar astrophysics, and the planning of NASA and other space missions. There are two principal components of NStED: a database of 140,000 nearby stars and exoplanet-hosting stars, and an archive dedicated to high precision photometric surveys for transiting exoplanets (NStED-ETSS). We present summaries of these components. The NStED stellar database currently serves published parameters for 140,000 stars. These parameters include coordinates, multiplicity, proper motion, parallax, spectral type, multiband photometry, radial velocity, metallicity, chromospheric and coronal activity index, rotation velocity/period, infrared excess. NStED-ETSS currently serves data from the TrES survey of the Kepler field as well as dedicated photometric surveys of four stellar clusters. NStED-ETSS aims to serve both the surveys and the broader astronomical community by archiving these data and making them available in a homogeneous format.

astro-ph.EP↗

arXiv1996

ISOCAM Observations of NGC 6946: Mid-IR Structure

The nearby spiral galaxy NGC 6946 was observed with ISO-CAM in the mid-infrared, achieving 7 arcsec resolution and sub-MJy/steradian sensitivity. Images taken with CAM filters LW2 (7 microns) and LW3 (15 microns) are analysed to determine the morphology of this galaxy and understand better the emission mechanisms. The mid-infrared emission follows an exponential disk with a scale length 75 arcsec. This is 60% of the scale length in the optical R-band and radio continuum. The nuclear starburst region is too bright for reliable measurement in these images. Its surface brightness exceeds the inner disk by at least a factor of 12. The arms and interarm regions are clearly detected, with each of these components contributing about equally to the disk emission. The arm-interarm contrast is 2-4 in the mid-IR, close to that measured in the visible R band light and lower than the contrast in $Hα$, suggesting that non-ionizing radiation contributes significantly to dust heating.

astro-ph↗