arXiv subjects

M. L. Juan

Publications and source records attributed to M. L. Juan.

10 recordsLinked to original sources

arXiv2025

Optomechanical Backaction in the Bistable Regime

With a variety of realisations, optomechanics utilizes its light matter interaction to test fundamental physics. By coupling the phonons of a mechanical resonator to the photons in a high quality cavity, control of increasingly macroscopic objects has become feasible. In such systems, state manipulation of the mechanical mode is achieved by driving the cavity. To be able to achieve high drive powers the system is typically designed such that it remains in a linear response regime when driven. A nonlinear response and especially bistability in a driven cavity is often considered detrimentally to cooling and state preparation in optomechanical systems and is avoided in experiments. Here we show, that with an intrinsic nonlinear cavity backaction cooling of a mechanical resonator is feasible operating deeply within the nonlinear regime of the cavity. With our theory taking the nonlinearity into account, precise predictions on backaction cooling can be achieved even with a cavity beyond the bifurcation point, where the cavity photon number spectrum starts to deviate from a typical Lorentzian shape.

quant-ph↗

arXiv2024

Kerr enhanced optomechanical cooling in the unresolved sideband regime

Dynamical backaction cooling has been demonstrated to be a successful method for achieving the motional quantum ground state of a mechanical oscillator in the resolved sideband regime, where the mechanical frequency is significantly larger than the cavity decay rate. Nevertheless, as mechanical systems increase in size, their frequencies naturally decrease, thus bringing them into the unresolved sideband regime, where the effectiveness of the sideband cooling approach decreases. Here, we will demonstrate, however, that this cooling technique in the unresolved sideband regime can be significantly enhanced by utilizing a nonlinear cavity as shown in the experimental work of Zoepfl et. al. (PRL, 2023). The above arises due to the increased asymmetry between the cooling and heating processes, thereby improving the cooling efficiency.

quant-ph↗

arXiv2023

Kerr enhanced backaction cooling in magnetomechanics

Optomechanics is a prime example of light matter interaction, where photons directly couple to phonons, allowing to precisely control and measure the state of a mechanical object. This makes it a very appealing platform for testing fundamental physics or for sensing applications. Usually, such mechanical oscillators are in highly excited thermal states and require cooling to the mechanical ground state for quantum applications, which is often accomplished by utilising optomechanical backaction. However, while massive mechanical oscillators are desirable for many tasks, their frequency usually decreases below the cavity linewidth, significantly limiting the methods that can be used to efficiently cool. Here, we demonstrate a novel approach relying on an intrinsically nonlinear cavity to backaction-cool a low frequency mechanical oscillator. We experimentally demonstrate outperforming an identical, but linear, system by more than one order of magnitude. Furthermore, our theory predicts that with this approach we can also surpass the standard cooling limit of a linear system. By exploiting a nonlinear cavity, our approach enables efficient cooling of a wider range of optomechanical systems, opening new opportunities for fundamental tests and sensing.

quant-ph↗

arXiv2023

Single-photon cooling in microwave magneto-mechanics

Cavity optomechanics, where photons are coupled to mechanical motion, provides the tools to control mechanical motion near the fundamental quantum limits. Reaching single-photon strong coupling would allow to prepare the mechanical resonator in non-Gaussian quantum states. Preparing massive mechanical resonators in such states is of particular interest for testing the boundaries of quantum mechanics. This goal remains however challenging due to the small optomechanical couplings usually achieved with massive devices. Here we demonstrate a novel approach where a mechanical resonator is magnetically coupled to a microwave cavity. We measure a single-photon coupling of $g_0/2 π\sim 3$ kHz, an improvement of one order of magnitude over current microwave optomechanical systems. At this coupling we measure a large single-photon cooperativity with $C_0 \gtrsim 10$, an important step to reach single-photon strong coupling. Such a strong interaction allows us to cool the massive mechanical resonator to a third of its steady state phonon population with less than two photons in the microwave cavity. Beyond tests for quantum foundations, our approach is also well suited as a quantum sensor or a microwave to optical transducer.

quant-ph↗

arXiv2019

A Unidirectional On-Chip Photonic Interface for Superconducting Circuits

We propose and analyze a passive architecture for realizing on-chip, scalable cascaded quantum devices. In contrast to standard approaches, our scheme does not rely on breaking Lorentz reciprocity. Rather, we engineer the interplay between pairs of superconducting transmon qubits and a microwave transmission line, in such a way that two delocalized orthogonal excitations emit (and absorb) photons propagating in opposite directions. We show how such cascaded quantum devices can be exploited to passively probe and measure complex many-body operators on quantum registers of stationary qubits, thus enabling the heralded transfer of quantum states between distant qubits, as well as the generation and manipulation of stabilizer codes for quantum error correction.

quant-ph↗

arXiv2018

Cooperative Effects in Closely Packed Quantum Emitters with Collective Dephasing

In a closely packed ensemble of quantum emitters, cooperative effects are typically suppressed due to the dephasing induced by the dipole-dipole interactions. Here, we show that by adding sufficiently strong collective dephasing cooperative effects can be restored. In particular, we show that the dipole force on a closely packed ensemble of strongly driven two-level quantum emitters, which collectively dephase, is enhanced in comparison to the dipole force on an independent non-interacting ensemble. Our results are relevant to solid state systems with embedded quantum emitters such as colour centers in diamond and superconducting qubits in microwave cavities and waveguides.

quant-ph↗

arXiv2017

Bistability in a Mesoscopic Josephson Junction Array Resonator

We present an experimental investigation of stochastic switching of a bistable Josephson junctions array resonator with a resonance frequency in the GHz range. As the device is in the regime where the anharmonicity is on the order of the linewidth, the bistability appears for a pump strength of only a few photons. We measure the dynamics of the bistability by continuously observing the jumps between the two metastable states, which occur with a rate ranging from a few Hz down to a few mHz. The switching rate strongly depends on the pump strength, readout strength and the temperature, following Kramer's law. The interplay between nonlinearity and coupling, in this little explored regime, could provide a new resource for nondemolition measurements, single photon switches or even elements for autonomous quantum error correction.

cond-mat.supr-con↗

arXiv2016

Near-field Levitated Quantum Optomechanics with Nanodiamonds

We theoretically show that the dipole force of an ensemble of quantum emitters embedded in a dielectric nanosphere can be exploited to achieve near-field optical levitation. The key ingredient is that the polarizability from the ensemble of embedded quantum emitters can be larger than the bulk polarizability of the sphere, thereby enabling the use of repulsive optical potentials and consequently the levitation using optical near-fields. In levitated cavity quantum optomechanics, this could be used to boost the single-photon coupling by combining larger polarizability to mass ratio, larger field gradients, and smaller cavity volumes while remaining in the resolved sideband regime and at room temperature. A case study is done with a nanodiamond containing a high-density of silicon-vacancy color centers that is optically levitated in the evanescent field of a tappered nano-fiber and coupled to a high-finesse microsphere cavity.

quant-ph↗

arXiv2015

Observation of cooperatively enhanced atomic dipole forces from NV centers in optically trapped nanodiamonds

Since the early work by Ashkin in 1970, optical trapping has become one of the most powerful tools for manipulating small particles, such as micron sized beads or single atoms. The optical trapping mechanism is based on the interaction energy of a dipole and the electric field of the laser light. In atom trapping, the dominant contribution typically comes from the allowed optical transition closest to the laser wavelength, whereas for mesoscopic particles it is given by the bulk polarizability of the material. These two different regimes of optical trapping have coexisted for decades without any direct link, resulting in two very different contexts of applications: one being the trapping of small objects mainly in biological settings, the other one being dipole traps for individual neutral atoms in the field of quantum optics. Here we show that for nanoscale diamond crystals containing artificial atoms, so-called nitrogen vacancy (NV) color centers, both regimes of optical trapping can be observed at the same time even in a noisy liquid environment. For wavelengths in the vicinity of the zero-phonon line transition of the color centers, we observe a significant modification ($10\%$) of the overall trapping strength. Most remarkably, our experimental findings suggest that owing to the large number of artificial atoms, collective effects greatly contribute to the observed trapping strength modification. Our approach adds the powerful atomic-physics toolbox to the field of nano-manipulation.

quant-ph↗

arXiv2014

3D manipulation with scanning near field optical nanotweezers

Recent advances in Nanotechnologies have prompted the need for tools to accurately and non-invasively manipulate individual nano-objects. Among possible strategies, optical forces have been foreseen to provide researchers with nano-optical tweezers capable to trap a specimen and move it in 3D. In practice though, the combination of weak optical forces involved and photothermal issues have thus far prevented their experimental realization. Here, we demonstrate first 3D optical manipulation of single 50 nm dielectric objects with near field nano-tweezers. The nano-optical trap is built by engineering a bowtie plasmonic aperture at the extremity of a tapered metal-coated optical fiber. Both the trapping operation and monitoring are performed through the optical fiber making these nano-tweezers totally autonomous and free of bulky optical elements. The achieved trapping performances allow for the trapped specimen to be moved over tens of micrometers during several minutes with very low in-trap intensities. This novel non-invasive approach is foreseen to open new horizons in nanosciences by offering an unprecedented level of control of nano-sized objects including heat-sensitive bio-specimens.

physics.optics↗