arXiv subjects

M. Meschke

Publications and source records attributed to M. Meschke.

At least 19 recordsLinked to original sources

arXiv2017

Hybrid single-electron turnstiles with thick superconducting electrodes for improved quasiparticle relaxation

We demonstrate shadow evaporation-based fabrication of high-quality ultrasmall normal metal -- insulator -- superconductor tunnel junctions where the thickness of the superconducting electrode is not limited by the requirement of small junction size. The junctions are formed between a film of manganese-doped aluminium acting as the normal conducting electrode, covered by a thicker, superconducting layer of pure Al. We characterize the junctions by sub-gap current--voltage measurements and charge pumping measurements in a gate-driven hybrid single-electron transistor, operated as a turnstile for single electrons. The technique allows to advance towards turnstiles with close to ideally thermalized superconducting reservoirs, prerequisite for reaching metrological current quantization accuracy in a hybrid turnstile. We further present an alternative way to realize small junctions with thick Al leads based on multi-angle deposition. The work enables the future investigation of turnstiles based on superconductors other than Al, and benefits various other Al tunnel junction devices for which quasiparticle thermalization is essential.

cond-mat.mes-hall↗

arXiv2017

On-and-off chip cooling of a Coulomb blockade thermometer down to 2.8 mK

Cooling nanoelectronic devices below 10 mK is a great challenge since thermal conductivities become very small, thus creating a pronounced sensitivity to heat leaks. Here, we overcome these difficulties by using adiabatic demagnetization of \emph{both} the electronic leads \emph{and} the large metallic islands of a Coulomb blockade thermometer. This reduces the external heat leak through the leads and also provides on-chip refrigeration, together cooling the thermometer down to 2.8$\pm$0.1 mK. We present a thermal model which gives a good qualitative account and suggests that the main limitation is heating due to pulse tube vibrations. With better decoupling, temperatures below 1 mK should be within reach, thus opening the door for microkelvin nanoelectronics.

cond-mat.mes-hall↗

arXiv2017

Nanosecond thermometry with Josephson junction

We demonstrate a novel approach to thermometry at the nanoscale exploiting a superconducting weak link. Such a weak link probed with nanosecond current pulses serves as a temperature sensing element and, due to the fast inherent dynamics, is capable of delivering unprecedented temporal resolution. We employ the thermometer to measure dynamic temperature of electrons in a long superconducting wire relaxing to the bath temperature after application of the heating pulse. Our measurement delivers nanosecond resolution thus providing the proof-of-concept of the fastest-todate all-solid-state thermometry. Our method improves the state-of-the-art temporal resolution of mesoscopic thermometry by at least two orders of magnitude, extending temporal resolution of existing experiments and introducing new possibilities for ultra-sensitive calorimeters and radiation detectors.

cond-mat.supr-con↗

arXiv2017

Thermal Conductance of a Single-Electron Transistor

We report on combined measurements of heat and charge transport through a single-electron transistor. The device acts as a heat switch actuated by the voltage applied on the gate. The Wiedemann-Franz law for the ratio of heat and charge conductances is found to be systematically violated away from the charge degeneracy points. The observed deviation agrees well with the theoretical expectation. With large temperature drop between the source and drain, the heat current away from degeneracy deviates from the standard quadratic dependence in the two temperatures.

cond-mat.mes-hall↗

arXiv2016

A cascade electronic refrigerator using superconducting tunnel junctions

Micro-refrigerators that operate in the sub-kelvin regime are a key device in quantum technology. A well-studied candidate, an electronic cooler using Normal metal - Insulator - Superconductor (NIS) tunnel junctions offers substantial performance and power. However, its superconducting electrodes are severely overheated due to exponential suppression of their thermal conductance towards low temperatures, and the cooler performs unsatisfactorily - especially in powerful devices needed for practical applications. We employ a second NIS cooling stage to thermalize the hot superconductor at the backside of the main NIS cooler. Not only providing a lower bath temperature, the second stage cooler actively evacuates quasiparticles out of the hot superconductor, especially in the low temperature limit. The NIS cooler approaches its ideal theoretical expectations without compromising cooling power. This cascade design can also be employed to manage excess heat in other cryo-electronic devices.

cond-mat.mes-hall↗

arXiv2016

Quasiparticle trapping in Meissner and vortex states of mesoscopic superconductors

Nowadays superconductors serve in numerous applications, from high-field magnets to ultra-sensitive detectors of radiation. Mesoscopic superconducting devices, i.e. those with nanoscale dimensions, are in a special position as they are easily driven out of equilibrium under typical operating conditions. The out-of-equilibrium superconductors are characterized by non-equilibrium quasiparticles. These extra excitations can compromise the performance of mesoscopic devices by introducing, e.g., leakage currents or decreased coherence times in quantum devices. By applying an external magnetic field, one can conveniently suppress or redistribute the population of excess quasiparticles. In this article we present an experimental demonstration and a theoretical analysis of such effective control of quasiparticles, resulting in electron cooling both in the Meissner and vortex states of a mesoscopic superconductor. We introduce a theoretical model of quasiparticle dynamics which is in quantitative agreement with the experimental data.

cond-mat.mes-hall↗

arXiv2015

Tunnel-Junction Thermometry Down to Millikelvin Temperatures

We present a simple on-chip electronic thermometer with the potential to operate down to 1 mK. It is based on transport through a single normal-metal - superconductor tunnel junction with rapidly widening leads. The current through the junction is determined by the temperature of the normal electrode that is efficiently thermalized to the phonon bath, and it is virtually insensitive to the temperature of the superconductor, even when the latter is relatively far from equilibrium. We demonstrate here the operation of the device down to 7 mK and present a systematic thermal analysis.

cond-mat.mes-hall↗

arXiv2015

Accurate Coulomb Blockade Thermometry up to 60 Kelvin

We demonstrate experimentally a precise realization of Coulomb Blockade Thermometry (CBT) working at temperatures up to 60 K. Advances in nano fabrication methods using electron beam lithography allow us to fabricate a uniform arrays of sufficiently small tunnel junctions to guarantee an overall temperature reading uncertainty of about 1\%

cond-mat.mes-hall↗

arXiv2014

Sub-50 mK electronic cooling with large-area superconducting tunnel junctions

In electronic cooling with superconducting tunnel junctions, the cooling power is counterbalanced by the interaction with phonons and by the heat flow from the overheated leads. We study aluminium-based coolers that are equipped with a suspended normal metal and an efficient quasi-particle drain. At intermediate temperatures, the phonon bath of the suspended normal metal is cooled. At lower temperatures, by adjusting the junction transparency, we control the injection current, and thus the superconductor temperature. The device shows a strong cooling from 150 mK down to about 30 mK, a factor of five in temperature. We suggest that spatial non-uniformity in the superconductor gap limits the cooling toward lower temperatures.

cond-mat.mes-hall↗

arXiv2014

Fast electron thermometry towards ultra-sensitive calorimetric detection

We demonstrate radiofrequency thermometry on a micrometer-sized metallic island below 100 mK. Our device is based on a normal metal-insulator-superconductor tunnel junction coupled to a resonator with transmission readout. In the first generation of the device, we achieve 90 μK/Hz^1/2 noise-equivalent temperature with 10 MHz bandwidth. We measure the thermal relaxation time of the electron gas in the island, which we find to be of the order of 100 μs. Such a calorimetric detector, upon optimization, can be seamlessly integrated into superconducting circuits, with immediate applications in quantum-thermodynamics experiments down to single quanta of energy.

cond-mat.mes-hall↗

arXiv2014

Silver-Epoxy Microwave Filters and Thermalizers for Millikelvin Experiments

We present Silver-epoxy filters combining excellent microwave attenuation with efficient wire thermalization, suitable for low temperature quantum transport experiments. Upon minimizing parasitic capacitances, the attenuation reaches >100 dB above ~150 MHz and - when capacitors are added - already above ~30 MHz. We measure the device electron temperature with a GaAs quantum dot and demonstrate excellent filter performance. Upon improving the sample holder and adding a second filtering stage, we obtain electron temperatures as low as 7.5 +/- 0.2 mK in metallic Coulomb blockade thermometers.

cond-mat.mes-hall↗

arXiv2013

Trapping hot quasi-particles in a high-power superconducting electronic cooler

The performance of hybrid superconducting electronic coolers is usually limited by the accumulation of hot quasi-particles in the superconducting leads. This issue is all the more stringent in large-scale and high-power devices, as required by applications. Introducing a metallic drain connected to the superconducting electrodes via a fine-tuned tunnel barrier, we efficiently remove quasi-particles and obtain electronic cooling from 300 mK down to 130 mK with a 400 pW cooling power. A simple thermal model accounts for the experimental observations.

cond-mat.mes-hall↗

arXiv2013

Primary thermometry in the intermediate Coulomb blockade regime

We investigate Coulomb blockade thermometers (CBT) in an intermediate temperature regime, where measurements with enhanced accuracy are possible due to the increased magnitude of the differential conductance dip. Previous theoretical results show that corrections to the half width and to the depth of the measured conductance dip of a sensor are needed, when leaving the regime of weak Coulomb blockade towards lower temperatures. In the present work, we demonstrate experimentally that the temperature range of a CBT sensor can be extended by employing these corrections without compromising the primary nature or the accuracy of the thermometer.

cond-mat.mes-hall↗

arXiv2012

Metallic Coulomb Blockade Thermometry down to 10 mK and below

We present an improved nuclear refrigerator reaching 0.3 mK, aimed at microkelvin nanoelectronic experiments, and use it to investigate metallic Coulomb blockade thermometers (CBTs) with various resistances R. The high-R devices cool to slightly lower T, consistent with better isolation from the noise environment, and exhibit electron-phonon cooling ~ T^5 and a residual heat-leak of 40 aW. In contrast, the low-R CBTs display cooling with a clearly weaker T-dependence, deviating from the electronphonon mechanism. The CBTs agree excellently with the refrigerator temperature above 20 mK and reach a minimum-T of 7.5 +/- 0.2 mK.

cond-mat.mes-hall↗

arXiv2011

Magnetic-Field-Induced Stabilization of Non-Equilibrium Superconductivity

A small magnetic field is found to enhance relaxation processes in a superconductor thus stabilizing superconductivity in non-equilibrium conditions. In a normal-metal (N) - insulator - superconductor (S) tunnel junction, applying a field of the order of 100 μT leads to significantly improved cooling of the N island by quasiparticle (QP) tunneling. These findings are attributed to faster QP relaxation within the S electrodes as a result of enhanced QP drain through regions with locally suppressed energy gap due to magnetic vortices in the S leads at some distance from the junction.

cond-mat.supr-con↗

arXiv2011

Tunnel Spectroscopy of a Proximity Josephson Junction

We present tunnel spectroscopy experiments on the proximity effect in lateral superconductor-normal metal-superconductor (SNS) Josephson junctions. Our weak link is embedded into a superconducting (S) ring allowing phase biasing of the Josephson junction by an external magnetic field. We explore the temperature and phase dependence of both the induced mini-gap and the modification of the density of states in the normal (N) metal. Our results agree with a model based on the quasiclassical theory in the diffusive limit. The device presents an advanced version of the superconducting quantum interference proximity transistor (SQUIPT), now reaching flux sensitivities of 3 nA$/Φ_0$ where $Φ_0$ is the flux quantum.

cond-mat.supr-con↗

arXiv2011

Laterally proximized aluminum tunnel junctions

This letter presents experiments on junctions fabricated by a new technique that enables the use of high quality aluminum oxide tunnel barriers with normal metal electrodes at low temperatures. Inverse proximity effect is applied to diminish the superconductivity of an aluminum dot through a clean lateral connection to a normal metal electrode. To demonstrate the effectiveness of this method, fully normal-state single electron transistors (SET) and normal metal-insulator-superconductor (NIS) junctions applying proximized Al junctions were fabricated. The transport characteristics of the junctions were similar to those obtained from standard theoretical models of regular SETs and NIS junctions.

cond-mat.mes-hall↗

arXiv2010

Ex-situ Tunnel Junction Process Technique Characterized by Coulomb Blockade Thermometry

We investigate a wafer scale tunnel junction fabrication method, where a plasma etched via through a dielectric layer covering bottom Al electrode defines the tunnel junction area. The ex-situ tunnel barrier is formed by oxidation of the bottom electrode in the junction area. Room temperature resistance mapping over a 150 mm wafer give local deviation values of the tunnel junction resistance that fall below 7.5 % with an average of 1.3 %. The deviation is further investigated by sub-1 K measurements of a device, which has one tunnel junction connected to four arrays consisting of N junctions (N = 41, junction diameter 700 nm). The differential conductance is measured in single-junction and array Coulomb blockade thermometer operation modes. By fitting the experimental data to the theoretical models we found an upper limit for the local tunnel junction resistance deviation of ~5 % for the array of 2N+1 junctions. This value is of the same order as the minimum detectable deviation defined by the accuracy of our experimental setup.

cond-mat.mtrl-sci↗