Searcharxiv⌕ Search

arXiv subjects

M. Migliorati

Publications and source records attributed to M. Migliorati.

At least 19 recordsLinked to original sources
arXiv2025

A rigorous study on the longitudinal beam coupling impedance of a cylindrical lossy pipe in normal and anomalous regimes

One of the primary issues in designing particle accelerators is the effect of energy losses and collective instabilities caused by the conductivity of the vacuum chamber. Due to its relevance, many authors have long focused on studying the coupling impedance of lossy pipes with various geometries and metals. Most studies were developed for relativistic beams and room-temperature conductivity. In recent years, there has been increasing interest in the high-frequency impedance behavior of ultra-short bunches, as in the case of FELs, and in the anomalous conductivity at cryogenic temperatures of the vacuum chambers. This work introduces a new unifying theoretical framework for analyzing electromagnetic interactions in cylindrical pipes excited by charged particles traveling on the axis. In this context, a key achievement is the derivation of a rigorous expression for the electric conductivity, based on the Boltzmann theory of a Fermi gas, which forms the foundation for subsequent developments. New formulas for the surface impedance of cylindrical pipes are presented, from which a more general impedance expression is derived. Our approach captures the system's behavior across various energy and frequency regimes. Eventually, the anomalous regime is studied rigorously, providing analytical solutions for the electromagnetic field at cryogenic temperatures. Indeed, new and exact expressions for the anomalous surface impedance for carriers' reflection coefficients p = 0 and p = 1 are obtained, offering deeper insight into the electromagnetic properties of such systems under extreme conditions.

physics.acc-ph↗
arXiv2022

A fast tracking code for evaluating collective effects in linear accelerators

The demands on performance of advanced linear accelerator based facilities strongly depend on the quality of the particle beams produced by such machines. Indeed, state-of-the-art applications in photon production and high-energy physics colliders require to use very high brightness electron beams, implying the coexistence of high peak currents and small transverse emittances. In such systems, the nominal phase-space density may be diluted by the presence of self-induced electromagnetic fields, causing interaction among charged particles through space charge forces and the excitation of wakefields. The two sources of collective effects may both be present in significant levels, and be coupled by the strong externally applied transverse and longitudinal fields present in modern high gradient linear accelerators. Thus, beam dynamics studies investigating all relevant effects, applied and collective, are necessary to predict the operational limitations of a given instrument. Such modeling, involving a large number of computational particles, can require significant numerical resources. In this paper we present a fast tracking code which permits accurate evaluation of wakefield effects in rf linacs, while also including a simple, robust model for space-charge forces to streamline the computations. The features of such a tool are discussed in detail in this paper and comparisons with more time-intensive commonly used tracking codes or analytical models are utilized to validate the approach we introduce. In addition, the applications motivating the development of this code define unique and challenging scenarios from the perspective of beam physics. Specifically, the fast simulation framework developed in this paper aims to describe intense electron beams injected at low energy in high-gradient accelerating structures which introduce strong rf focusing as well as strong wakefield interactions.

physics.acc-ph↗
arXiv2022

Investigations on the multi-sector hard X-Band Structures

The development of high gradient accelerating structures is one of the leading activities of the accelerator community. In the technological research of new construction methods for these devices, high-power testing is a critical step for the verification of their viability. Recent experiments showed that accelerating cavities made from hard copper alloys, can achieve better performance as compared with soft copper ones. The results of experiments showed that welded, hard copper cavities have shown breakdown rate of $10^{-3}$/pulse/meter at a gradient of about 150 MV/m, in the X-band, a using a shaped pulse with a 150 ns flat part. We continue the design, construction, and higher power experimental tests of three cells standing wave (SW) 11.424 GHz accelerating cavities fabricated with hard CuAg alloy to study the RF breakdown physics. Our aim is to fabricate the accelerating structures with innovative technologies easier to handle and cheaper; easier for surfaces inspection; easier for data elaboration and validation of joining techniques. The choice of these new technological approaches and design methods provides also the possibility of allocating the parasitic Higher Order Mode dampers. This paper describes the design of an optimized cavity made with sectors which provides a high longitudinal shunt impedance $R_{sh}$ of the operating mode. The cavity will be fabricated by using the Tungsten Inert Gas process to realize a hard CuAg structure. Two three-cells SW X-band accelerating cavities, to be operated in the $π$-mode and made out of hard CuAg alloy, were already fabricated at INFN-LNF by means of clamping and welding by using the TIG approach. Finally, we also report the RF characterization and low-power RF tests of a two-halves split hard CuAg structure that will be consequently TIG welded and employed for high-gradient tests and for the study of the RF breakdown physics.

physics.acc-ph↗
arXiv2022

Impedance modelling and collective effects in the Future Circular e$^+$e$^-$ Collider with 4 IPs

The FCC-ee impedance model is being constantly updated closely following the vacuum chamber design and parameters evolution. In particular, at present, a thicker NEG coating of 150 nm (instead of previous 100 nm) has been suggested by the vacuum experts, and a more realistic impedance model of the bellows has been investigated. Moreover, also the transverse impedance has been updated by considering the same sources as for the longitudinal case. Therefore, the FCC-ee impedance database is getting more complete and the impedance model is being refined. In this paper we describe the presently available machine coupling impedance in both longitudinal and transverse planes, and study the impedance-driven single bunch instabilities (with and without beam-beam interaction) for the new FCC-ee parameter set with 4 interaction points (IPs). The results are compared with the previously obtained ones and a further possible mitigation of the beam-beam head-tail instability (X-Z instability) is proposed.

physics.acc-ph↗
arXiv2021

Time-Of-Flight methodologies with large-area diamond detectors for the effectively characterization of tens of MeV protons

A novel detector based on a polycrystalline diamond sensor is here employed in an advanced Time-Of-Flight scheme for the characterization of energetic ions accelerated during laser-matter interactions. The optimization of the detector and of the advanced TOF methodology allow to obtain signals characterized by high signal-to-noise ratio and high dynamic range even in the most challenging experimental environments, where the interaction of high-intensity laser pulses with matter leads to effective ion acceleration, but also to the generation of strong Electromagnetic Pulses (EMPs) with intensities up to the MV/m order. These are known to be a serious threat for the fielded diagnostic systems. In this paper we report on the measurement performed with the PW-class laser system Vega 3 at CLPU (30 J energy, 10^21 W/cm2 intensity, 30 fs pulses) irradiating solid targets, where both tens of MeV ions and intense EMP fields were generated. The data were analyzed to retrieve a calibrated proton spectrum and in particular we focus on the analysis of the most energetic portion (E > 5.8 MeV) of the spectrum showing a procedure to deal with the intrinsic lower sensitivity of the detector in the mentioned spectral-range.

physics.ins-det↗
arXiv2021

Time-Of-Flight methodologies with large-area diamond detectors for ion characterization in laser-driven experiments

Time-Of-Flight (TOF) technique coupled with semiconductor detectors is a powerful instrument to provide real-time characterization of ions accelerated because of laser-matter interactions. Nevertheless, the presence of strong electromagnetic pulses (EMPs) generated during the interactions, can severely hinder its employment. For this reason, the diagnostic system must be designed to have high EMP shielding. Here we present a new advanced prototype of detector, developed at ENEA-Centro Ricerche Frascati (Italy), with a large area (15 mm x 15 mm) polycrystalline diamond sensor having 150 microns thickness. The tailored detector design and testing ensure high sensitivity and, thanks to the fast temporal response, high energy resolution of the reconstructed ion spectrum. The detector was offline calibrated and then successfully tested during an experimental campaign carried out at the PHELIX laser facility at GSI (Germany). The high rejection to EMP fields was demonstrated and suitable calibrated spectra of the accelerated protons were obtained.

physics.ins-det↗
arXiv2021

Relativistic approach to a low perveance high quality matched beam for a high efficiency Ka-Band klystron

Advanced technical solution for the design of a low perveance electron gun with a high quality beam dedicated to high power Ka-band klystrons is presented in this paper. The proposed electron gun can be used to feed linear accelerating structures at 36 GHz with an estimated input power of 20 MW, thus achieving an effective accelerating electric field in the (100-150) MV/m range. additionally, in the framework of the Compact Light XLS project, a short Ka-band accelerating structure providing an integrated voltage of at least 15 MV, has been proposed for bunch-phase linearization. For the klystron, a very small beam dimension is needed and the presented electron gun responds to this requirement. An estimate of the rotational velocity at beam edge indicates that the diamagnetic field due to rotational currents are small compared to the longitudinal volume. A detailed analysis of how this is arrived at, by compression of the beam, rotation in the magnetic field, and analysis of the subsequently generated diamagnetic field has been discussed.

physics.acc-ph↗
arXiv2021

Self-consistent derivation of the transverse mode coupling instability for coasting beams using the linearized Vlasov equation

The mode coupling instability for coasting beams has been discussed in a previous paper using macroparticle tracking simulations from the pyHeadTail code and a simple analytical formula which was proposed as an extension of the ansatz used for the single-particle formalism. In this paper, we propose a self-consistent derivation of this formula based on the linearized Vlasov equation. The proposed mode coupling instability for coasting beams was never predicted or discussed in the past and we believe that the reason is twofold. First, to derive it analytically from the linearized Vlasov equation, one should not make the usual approximation $\sin(ϕ)\simeq (e^{jϕ})/(2j)$, where $ϕ$ is the transverse betatron phase, but really consider the two terms of $\sin(ϕ)=(e^{jϕ}-e^{-jϕ})/(2j)$ as the second term is the one responsible for the mode coupling in coasting beams. It should be stressed here that mode coupling is found already with driving impedance only. Note that the previous approximation is also usually made for bunched beams and this case should therefore also be carefully reviewed in the future. Second, by including the detuning impedance, the coupling is much stronger and this is what we found also in pyHeadTail simulations.

physics.acc-ph↗
arXiv2020

Study of collective effects in the CERN FCC-ee top-up booster

The CERN FCC-ee top-up booster synchrotron will accelerate electrons and positrons from an injection energy of 20 GeV up to an extraction energy between 45.6 GeV and 182.5 GeV depending on the operation mode. These accelerated beams will be used for the initial filling of the high-luminosity FCC-ee collider and for keeping the beam current constant over time using continuous top-up injection. Due to the high-intensities of the circulating beams, collective effects may represent a limitation in the top-up booster. In this work we present a first evaluation of the impedance model and the effects on beam dynamics. Methods to mitigate possible instabilities will be also discussed.

physics.acc-ph↗
arXiv2020

Accurate spectra for high energy ions by advanced time-of-flight diamond-detector schemes in experiments with high energy and intensity lasers

Time-Of-Flight (TOF) methods are very effective to detect particles accelerated in laser-plasma interactions, but they shows significant limitations when used in experiments with high energy and intensity lasers, where both high-energy ions and remarkable levels of ElectroMagnetic Pulses (EMPs) in the radiofrequency-microwave range are generated. Here we describe a novel advanced diagnostic method for the characterization of protons accelerated by intense matter interactions with high-energy and high-intensity ultra-short laser pulses up to the femtosecond and even future attosecond range. The method employs a stacked diamond detector structure and the TOF technique, featuring high sensitivity, high resolution, high radiation hardness and high signal-to-noise ratio in environments heavily affected by remarkable EMP fields. A detailed study on the use, the optimization and the properties of a single module of the stack is here also described for an experiment where a fast diamond detector is employed in an highly EMP-polluted environment. Accurate calibrated spectra of accelerated protons are presented from an experiment with the femtosecond Flame laser (beyond 100 TW power and ~$10^{19}$ W/cm$^2$ intensity) interacting with thin foil targets. The results that can be readily applied to the case of complex stack configurations and to more general experimental conditions.

physics.ins-det↗
arXiv2016

Space Charge Effects

The space charge forces are those generated directly by the charge distribution, with the inclusion of the image charges and currents due to the interaction of the beam with a perfectly conducting smooth pipe. Space charge forces are responsible for several unwanted phenomena related to beam dynamics, such as energy loss, shift of the synchronous phase and frequency, shift of the betatron frequencies, and instabilities. We will discuss in this lecture the main feature of space charge effects in high-energy storage rings as well as in low-energy linacs and transport lines.

physics.acc-ph↗
arXiv2016

Wakefields and Instabilities in Linear Accelerators

When a charged particle travels across the vacuum chamber of an accelerator, it induces electromagnetic fields, which are left mainly behind the generating particle. These electromagnetic fields act back on the beam and influence its motion. Such an interaction of the beam with its surro undings results in beam energy losses, alters the shape of the bunches, and shifts the betatron and synchrotron frequencies. At high beam current the fields can even lead to instabilities, thus limiting the performance of the accelerator in terms of beam quality and current intensity. We discuss in this lecture the general features of the electromagnetic fields, introducing the concepts of wakefields and giving a few simple examples in cylindrical geometry. We then show the effect of the wakefields on the dynamics of a beam in a linac, dealing in particular with the beam breakup instability and how to cure it.

physics.acc-ph↗
arXiv2014

Technical Design Report EuroGammaS proposal for the ELI-NP Gamma beam System

The machine described in this document is an advanced Source of up to 20 MeV Gamma Rays based on Compton back-scattering, i.e. collision of an intense high power laser beam and a high brightness electron beam with maximum kinetic energy of about 720 MeV. Fully equipped with collimation and characterization systems, in order to generate, form and fully measure the physical characteristics of the produced Gamma Ray beam. The quality, i.e. phase space density, of the two colliding beams will be such that the emitted Gamma ray beam is characterized by energy tunability, spectral density, bandwidth, polarization, divergence and brilliance compatible with the requested performances of the ELI-NP user facility, to be built in Romania as the Nuclear Physics oriented Pillar of the European Extreme Light Infrastructure. This document illustrates the Technical Design finally produced by the EuroGammaS Collaboration, after a thorough investigation of the machine expected performances within the constraints imposed by the ELI-NP tender for the Gamma Beam System (ELI-NP-GBS), in terms of available budget, deadlines for machine completion and performance achievement, compatibility with lay-out and characteristics of the planned civil engineering.

physics.acc-ph↗
arXiv2012

Molybdenum sputtering film characterization for high gradient accelerating structures

Technological advancements are strongly required to fulfill the demands of new accelerator devices with the highest accelerating gradients and operation reliability for the future colliders. To this purpose an extensive R&D regarding molybdenum coatings on copper is in progress. In this contribution we describe chemical composition, deposition quality and resistivity properties of different molybdenum coatings obtained via sputtering. The deposited films are thick metallic disorder layers with different resistivity values above and below the molibdenum dioxide reference value. Chemical and electrical properties of these sputtered coatings have been characterized by Rutherford backscattering, XANES and photoemission spectroscopy. We will also present a three cells standing wave section coated by a molybdenum layer $\sim$ 500 nm thick designed to improve the performance of X-Band accelerating systems.

physics.acc-ph↗
arXiv2011

Coupling of Laser-Generated Electrons with Conventional Accelerator Devices

Laser-based electron acceleration is attracting strong interest from the conventional accelerator community due to its outstanding characteristics in terms of high initial energy, low emittance and high beam current. Unfortunately, such beams are currently not comparable to those of conventional accelerators, limiting their use for the manifold applications that a traditional accelerator can have. Besides working on the plasma source itself, a promising approach to shape the laser-generated beams is coupling them with conventional accelerator elements in order to benefit from both, a versatile electron source and a controllable beam. In this paper we show that some parameters commonly used by the particle accelerator community must be reconsidered when dealing with laser-plasma beams. Starting from the parameters of laser-generated electrons which can be obtained nowadays by conventional multi hundred TW laser systems, we compare different conventional magnetic lattices able to capture and transport those GeV electrons. From this comparison we highlight some important limit of the state-of-the-art plasma generated electrons with respect to conventional accelerator ones. Eventually we discuss an application of such beams in undulators for Free Electron Lasers (FELs), which is one of the most demanding applications in terms of beam quality.

physics.acc-ph↗
arXiv2011

The parabolic trigonometric functions and the Chebyshev radicals

The parabolic trigonometric functions have recently been introduced as an intermediate step between circular and hyperbolic functions. They have been shown to be expressible in terms of irrational functions, linked to the solution of third degree algebraic equations. We show the link of the parabolic trigonometric functions with the Chebyshev radicals and also prove that further generalized forms of trigonometric functions, providing the natural solutions of the quintic algebraic equation, can be defined. We also discuss the link of this family of functions with the modular elliptic functions. 1

math-ph↗