arXiv subjects

M. Milovanovic

Publications and source records attributed to M. Milovanovic.

8 recordsLinked to original sources

arXiv2024

High-density gas target at the LHCb experiment

The recently installed internal gas target at LHCb presents exceptional opportunities for an extensive physics program for heavy-ion, hadron, spin, and astroparticle physics. A storage cell placed in the LHC primary vacuum, an advanced Gas Feed System, the availability of multi-TeV proton and ion beams and the recent upgrade of the LHCb detector make this project unique worldwide. In this paper, we outline the main components of the system, the physics prospects it offers and the hardware challenges encountered during its implementation. The commissioning phase has yielded promising results, demonstrating that fixed-target collisions can occur concurrently with the collider mode without compromising efficient data acquisition and high-quality reconstruction of beam-gas and beam-beam interactions.

physics.ins-det↗

arXiv2024

The LHCb VELO Upgrade Module Construction

The LHCb detector has undergone a major upgrade for LHC Run 3. This Upgrade I detector facilitates operation at higher luminosity and utilises full-detector information at the LHC collision rate, critically including the use of vertex information. A new vertex locator system, the VELO Upgrade, has been constructed. The core element of the new VELO are the double-sided pixelated hybrid silicon detector modules which operate in vacuum close to the LHC beam in a high radiation environment. The construction and quality assurance tests of these modules are described in this paper. The modules incorporate 200 \mum thick, n-on-p silicon sensors bump-bonded to 130 \nm technology ASICs. These are attached with high precision to a silicon microchannel substrate that uses evaporative CO$_2$ cooling. The ASICs are controlled and read out with flexible printed circuits that are glued to the substrate and wire-bonded to the chips. The mechanical support of the module is given by a carbon fibre plate, two carbon fibre rods and an aluminium plate. The sensor attachment was achieved with an average precision of 21 $\mathrm{\mu m}$, more than 99.5\% of all pixels are fully functional, and a thermal figure of merit of 3 \mathrm{Kcm^{2}W^{-1}}$ was achieved. The production of the modules was successfully completed in 2021, with the final assembly and installation completed in time for data taking in 2022.

physics.ins-det↗

arXiv2020

The HEV Ventilator

HEV is a low-cost, versatile, high-quality ventilator, which has been designed in response to the COVID-19 pandemic. The ventilator is intended to be used both in and out of hospital intensive care units, and for both invasive and non-invasive ventilation. The hardware can be complemented with an external turbine for use in regions where compressed air supplies are not reliably available. The standard modes provided include PC-A/C(Pressure Assist Control),PC-A/C-PRVC(Pressure Regulated Volume Control), PC-PSV (Pressure Support Ventilation) and CPAP (Continuous Positive airway pressure). HEV is designed to support remote training and post market surveillance via a web interface and data logging to complement the standard touch screen operation, making it suitable for a wide range of geographical deployment. The HEV design places emphasis on the quality of the pressure curves and the reactivity of the trigger, delivering a global performance which will be applicable to ventilator needs beyond theCOVID-19 pandemic. This article describes the conceptual design and presents the prototype units together with their performance evaluation.

physics.med-ph↗

arXiv2020

The HEV Ventilator Proposal

We propose the design of a ventilator which can be easily manufactured and integrated into the hospital environment to support COVID-19 patients. The unit is designed to support standard ventilator modes of operation, most importantly PRVC (Pressure Regulated Volume Control) and SIMV-PC (Synchronised Intermittent Mandatory Ventilation) modes. The unit is not yet an approved medical device and is in the concept and prototyping stage. It is presented here to invite fast feedback for development and deployment in the face of the COVID-19 pandemic.

physics.med-ph↗

arXiv2019

Determination of the electric field in highly-irradiated silicon sensors using edge-TCT measurements

A method is presented which allows to obtain the position-dependent electric field and charge density by fits to velocity profiles from edge-TCT data from silicon strip-detectors. The validity and the limitations of the method are investigated by simulations of non-irradiated $n^+p$ pad sensors and by the analysis of edge-TCT data from non-irradiated $n^+p$ strip-detectors. The method is then used to determine the position dependent electric field and charge density in $n^+p$ strip detectors irradiated by reactor neutrons to fluences between 1 and $10 \times 10^{15}$ cm$^{-2}$ for forward-bias voltages between 25 V and up to 550 V and for reverse-bias voltages between 50 V and 800 V. In all cases the velocity profiles are well described. The electric fields and charge densities determined provide quantitative insights into the effects of radiation damage for silicon sensors by reactor neutrons.

physics.ins-det↗

arXiv2016

Pairing instabilities of Dirac composite fermions

Recently, a Dirac (particle-hole symmetric) description of composite fermions in the half-filled quantum Hall system was proposed [D. T. Son, Phys. Rev. X 5, 031027 (2015)], and we study its possible consequences on BCS (Cooper) pairing of composite fermions (CF's). One of the main consequences is the existence of anisotropic states in single and bilayer systems, which was previously suggested in Ref. [J. S. Jeong and K. Park, Phys. Rev. B 91, 195119 (2015)]. We argue that in the half-filled single layer the gapped states may sustain anisotropy, because isotropic pairings may coexist with anisotropic ones. Furthermore, anisotropic pairings with addition of a particle-hole (PH) symmetry breaking mass term may evolve into rotationally symmetric states, i.e. Pfaffian states of Halperin-Lee-Read (HLR) ordinary CF's. On the basis of the Dirac formalism, we argue that in the quantum Hall bilayer at total filling one, with decreasing distance between layers weak pairing of p-wave paired CF's is gradually transformed from Dirac to ordinary, HLR-like, with concomitant decrease in the CF number. Global characterization of low-energy spectrum based on the Dirac CF's agrees well with previous calculations performed by exact diagonalization on a torus. Finally, we discuss features of Dirac formalism when applied in this context.

cond-mat.mes-hall↗

arXiv1996

Invariant structure of the hierarchy theory of fractional quantum Hall states with spin

We describe the invariant structure common to abelian fractional quantum Hall systems with spin. It appears in a generalization of the lattice description of the polarized hierarchy that encompasses both partially polarized and unpolarized ground state systems. We formulate, using the spin-charge decomposition, conditions that should be satisfied so that the description is SU(2) invariant. In the case of the spin- singlet hierarchy construction, we find that there are as many SU(2) symmetries as there are levels in the construction. We show the existence of a spin and charge lattice for the systems with spin. The ``gluing'' of the charge and spin degrees of freedom in their bulk is described by the gluing theory of lattices.

cond-mat.mes-hall↗

arXiv1996

Edge excitations of paired fractional quantum Hall states

The Hilbert spaces of the edge excitations of several ``paired'' fractional quantum Hall states, namely the Pfaffian, Haldane-Rezayi and 331 states, are constructed and the states at each angular momentum level are enumerated. The method is based on finding all the zero energy states for those Hamiltonians for which each of these known ground states is the exact, unique, zero-energy eigenstate of lowest angular momentum in the disk geometry. For each state, we find that, in addition to the usual bosonic charge-fluctuation excitations, there are fermionic edge excitations. The edge states can be built out of quantum fields that describe the fermions, in addition to the usual scalar bosons (or Luttinger liquids) that describe the charge fluctuations. The fermionic fields in the Pfaffian and 331 cases are a non-interacting Majorana (i.e., real Dirac) and Dirac field, respectively. For the Haldane-Rezayi state, the field is an anticommuting scalar. For this system we exhibit a chiral Lagrangian that has manifest SU(2) symmetry but breaks Lorentz invariance because of the breakdown of the spin statistics connection implied by the scalar nature of the field and the positive definite norm on the Hilbert space. Finally we consider systems on a cylinder where the fluid has two edges and construct the sectors of zero energy states, discuss the projection rules for combining states at the two edges, and calculate the partition function for each edge excitation system at finite temperature in the thermodynamic limit. It is pointed out that the conformal field theories for the edge states are examples of orbifold constructions.

cond-mat↗