arXiv subjects

M. Min

Publications and source records attributed to M. Min.

At least 109 records · Page 6Linked to original sources

arXiv2011

The complex circumstellar environment of HD142527

The recent findings of gas giant planets around young A-type stars suggest that disks surrounding Herbig Ae/Be stars will develop planetary systems. An interesting case is HD142527, for which previous observations revealed a complex circumstellar environment and an unusually high ratio of infrared to stellar luminosity. Its properties differ considerably from other Herbig Ae/Be stars. This suggests that the disk surrounding HD142527 is in an uncommon evolutionary stage. We aim for a better understanding of the geometry and evolutionary status of the circumstellar material around the Herbig Ae/Be star HD142527. We map the composition and spatial distribution of the dust around HD142527. We analyze SEST and ATCA millimeter data, VISIR N and Q-band imaging and spectroscopy. We gather additional relevant data from the literature. We use the radiative transfer code MCMax to construct a model of the geometry and density structure of the circumstellar matter, which fits all of the observables satisfactorily. We find that the disk of HD142527 has three geometrically distinct components separated by a disk gap running from 30 to 130 AU. There is a geometrically flat inner disk running from 0.3 AU up to 30 AU; an optically thin halo-like component of dust in the inner disk regions; and a massive self-shadowed outer disk running from 130 AU up to 200 AU. We derived a total dust mass in small grains of 10^-3 M0 and a vertical height of the inner wall of the outer disk of h = 60 AU. ....

astro-ph.SR↗

arXiv2010

The 9.7 and 18 um silicate absorption profiles towards diffuse and molecular cloud lines-of-sight

Studying the composition of dust in the interstellar medium (ISM) is crucial in understanding the cycle of dust in our galaxy. The mid-infrared spectral signature of amorphous silicates, the most abundant dust species in the ISM, is studied in different lines-of-sight through the Galactic plane, thus probing different conditions in the ISM. We have analysed 10 spectra from the Spitzer archive, of which 6 lines-of-sight probe diffuse interstellar medium material and 4 probe molecular cloud material. The 9.7 um silicate absorption features in 7 of these spectra were studied in terms of their shape and strength. In addition, the shape of the 18 um silicate absorption features in 4 of the diffuse sightline spectra were analysed. The 9.7 um silicate absorption bands in the diffuse sightlines show a strikingly similar band shape. This is also the case for all but one of the 18 um silicate absorption bands observed in diffuse lines-of-sight. The 9.7 um bands in the 4 molecular sightlines show small variations in shape. These modest variations in the band shape are inconsistent with the interpretation of the large variations in τ_9.7/E(J-K) between diffuse and molecular sightlines in terms of silicate grain growth. Instead, we suggest that the large changes in τ_9.7 / E(J-K) must be due to changes in E(J-K).

astro-ph.GA↗

arXiv2010

The thermal structure and the location of the snow line in the protosolar nebula: axisymmetric models with full 3-D radiative transfer

The precise location of the water ice condensation front ('snow line') in the protosolar nebula has been a debate for a long time. Its importance stems from the expected substantial jump in the abundance of solids beyond the snow line, which is conducive to planet formation, and from the higher stickiness in collisions of ice-coated dust grains, which may help the process of coagulation of dust and the formation of planetesimals. In an optically thin nebula, the location of the snow line is easily calculated to be around 3 AU. However, in its first 5 to 10 million years, the solar nebula was optically thick, implying a smaller snow line radius due to shielding from direct sunlight, but also a larger radius because of viscous heating. Several models have attempted to treat these opposing effects. However, until recently treatments beyond an approximate 1+1D radiative transfer were unfeasible. We revisit the problem with a fully self-consistent 3D treatment in an axisymmetric disk model, including a density-dependent treatment of the dust and ice sublimation. We find that the location of the snow line is very sensitive to the opacities of the dust grains and the mass accretion rate of the disk. We show that previous approximate treatments are quite efficient at determining the location of the snow line if the energy budget is locally dominated by viscous accretion. We derive an analytic estimate of the location of the snow line that compares very well with results from this and previous studies. Using solar abundances of the elements we compute the abundance of dust and ice and find that the expected jump in solid surface density at the snow line is smaller than previously assumed. We further show that in the inner few AU the refractory species are partly evaporated, leading to a significantly smaller solid state surface density in the regions where the rocky planets were formed.

astro-ph.EP↗

arXiv2010

Determining the forsterite abundance of the dust around AGB stars

We present a diagnostic tool to determine the forsterite abundance of the dust ejected by AGB stars. Our method is based on a comparison between the observed strength of spectral bands of forsterite and model calculations. We show that the 11.3 μm forsterite band is a robust indicator of the forsterite abundance of the current mass-loss period for AGB stars with an optically thick dust shell. The 33.6 μm band of forsterite is sensitive to changes in the density and the geometry of the emitting dust shell, and so a less robust indicator. We apply this method to six high mass-loss rate AGB stars, showing that AGB stars can have forsterite abundances of 12% by mass and higher, which is more than the previously found maximum abundance of 5%.

astro-ph.SR↗

arXiv2010

Dust evolution in protoplanetary disks around Herbig Ae/Be stars - The Spitzer view

In this paper we present mid-infrared spectra of a comprehensive set of Herbig Ae/Be stars observed with the Spitzer Space Telescope. The signal-to-noise ratio of these spectra is very high, ranging between about a hundred and several hundreds. During the analysis of these data we tested the validity of standard protoplanetary dust models and studied grain growth and crystal formation. On the basis of the analyzed spectra, the major constituents of protoplanetary dust around Herbig Ae/Be stars are amorphous silicates with olivine and pyroxene stoichiometry, crystalline forsterite and enstatite and silica. No other solid state features, indicating other abundant dust species, are present in the Spitzer spectra. Deviations of the synthetic spectra from the observations are most likely related to grain shape effects and uncertainties in the iron content of the dust grains. Our analysis revealed that larger grains are more abundant in the disk atmosphere of flatter disks than in that of flared disks, indicating that grain growth and sedimentation decrease the disk flaring. We did not find, however, correlations between the value of crystallinity and any of the investigated system parameters. Our analysis shows that enstatite is more concentrated toward the warm inner disk than forsterite, in contrast to predictions of equilibrium condensation models. None of the three crystal formation mechanisms proposed so far can alone explain all our findings. It is very likely that all three play at least some role in the formation of crystalline silicates.

astro-ph.SR↗

arXiv2010

Imaging of a Transitional Disk Gap in Reflected Light: Indications of Planet Formation Around the Young Solar Analog LkCa 15

We present H- and Ks-band imaging data resolving the gap in the transitional disk around LkCa 15, revealing the surrounding nebulosity. We detect sharp elliptical contours delimiting the nebulosity on the inside as well as the outside, consistent with the shape, size, ellipticity, and orientation of starlight reflected from the far-side disk wall, whereas the near-side wall is shielded from view by the disk's optically thick bulk. We note that forward-scattering of starlight on the near-side disk surface could provide an alternate interpretation of the nebulosity. In either case, this discovery provides confirmation of the disk geometry that has been proposed to explain the spectral energy distributions (SED) of such systems, comprising an optically thick outer disk with an inner truncation radius of ~46 AU enclosing a largely evacuated gap. Our data show an offset of the nebulosity contours along the major axis, likely corresponding to a physical pericenter offset of the disk gap. This reinforces the leading theory that dynamical clearing by at least one orbiting body is the cause of the gap. Based on evolutionary models, our high-contrast imagery imposes an upper limit of 21 Jupiter masses on companions at separations outside of 0.1" and of 13 Jupiter masses outside of 0.2". Thus, we find that a planetary system around LkCa 15 is the most likely explanation for the disk architecture.

astro-ph.SR↗

arXiv2010

SPITZER-IRS spectral fitting of discs around binary post-AGB stars - Corrigendum

Recently, we have discovered an error in our Monte-Carlo spectral fitting routine, more specifically where the errors on the fluxes were rescaled to get a reduced chi2 of 1. The rescaled errors were too big, resulting in too wide a range of good fits in our 100 step Monte-Carlo routine. This problem affects Figs. 7-9 and Tables A.1, A.2 in Gielen et al. (2008), Table 3 in Gielen et al. (2009a), and Table 4 in Gielen et al. (2009b). We corrected for this error and present the new values and errors in the tables below. The new values and errors nearly all fall within the old error range. Our best chi2 values and overall former scientific results are not affected. With these new errors some possible new trends in the dust parameters might be observed. These will be discussed in an upcoming paper where we extend the sample presented in Gielen et al. (2008) with newly obtained SPITZER-IRS data.

astro-ph.SR↗

arXiv2010

Full 2D radiative transfer modelling of transitional disk LkCa 15

With the legacy of Spitzer and current advances in (sub)mm astronomy, a large number of 'transitional' disks has been identified which are believed to contain gaps or have developped large inner holes, some filled with dust. This may indicate that complex geometries may be a key feature in disk evolution that has to be understood and modeled correctly. The disk around LkCa 15 is such a disk, with a gap ranging from ~5 - 50 AU, as identified by Espaillat et al. (2007) using 1+1D radiative transfer modelling. To fit the SED, they propose 2 possible scenarios for the inner (<5 AU) disk - optically thick or optically thin - and one scenario for the outer disk. We use the gapped disk of LkCa 15 as a showcase to illustrate the importance of 2D radiative transfer in transitional disks, by showing how the vertical dust distribution in dust-filled inner holes determines not only the radial optical depth but also the outer disk geometry. We use MCMax, a 2D radiative transfer code with a self-consistent vertical structure, to model the SED. We identify two possible geometries for the inner and outer disk, that are both different from those in Espaillat et al. (2007). An inner disk in hydrostatic equilibrium reprocesses enough starlight to fit the near infrared flux, but also casts a shadow on the inner rim of the outer disk. This requires the outer disk scale height to be large enough to rise out of the shadow. An optically thin inner disk does not cast such a shadow, and the SED can be fitted with a smaller outer disk scale height. For the dust in the inner regions to become optically thin however, the scale height would have to be so much larger than its hydrostatic equilibrium value that it effectively becomes a dust shell. It is currently unclear if a physical mechanism exists which could provide for such a configuration.

astro-ph.SR↗

arXiv2010

HD 95881: A gas rich to gas poor transition disk?

Context. Based on the far infrared excess the Herbig class of stars is divided into a group with flaring circumstellar disks (group I) and a group with flat circumstellar disks (group II). Dust sedimentation is generally proposed as an evolution mechanism to transform flaring disks into flat disks. Theory predicts that during this process the disks preserve their gas content, however observations of group II Herbig Ae stars demonstrate a lack of gas. Aims. We map the spatial distribution of the gas and dust around the group II Herbig Ae star HD 95881. Methods. We analyze optical photometry, Q-band imaging, infrared spectroscopy, and K and N-band interferometric spectroscopy. We use a Monte Carlo radiative transfer code to create a model for the density and temperature structure which quite accurately reproduces all the observables. Results. We derive a consistent picture in which the disk consists of a thick puffed up inner rim and an outer region which has a flaring gas surface and is relatively void of 'visible' dust grains. Conclusions. HD 95881 is in a transition phase from a gas rich flaring disk to a gas poor self-shadowed disk.

astro-ph.SR↗

arXiv2010

Determining the forsterite abundance of the dust around Asymptotic Giant Branch stars

Aims. We present a diagnostic tool to determine the abundance of the crystalline silicate forsterite in AGB stars surrounded by a thick shell of silicate dust. Using six infrared spectra of high mass-loss oxygen rich AGB stars we obtain the forsterite abundance of their dust shells. Methods. We use a monte carlo radiative transfer code to calculate infrared spectra of dust enshrouded AGB stars. We vary the dust composition, mass-loss rate and outer radius. We focus on the strength of the 11.3 and the 33.6 μm forsterite bands, that probe the most recent (11.3 μm) and older (33.6 μm) mass-loss history of the star. Simple diagnostic diagrams are derived, allowing direct comparison to observed band strengths. Results. Our analysis shows that the 11.3 μm forsterite band is a robust indicator for the forsterite abundance of the current mass-loss period for AGB stars with an optically thick dust shell. The 33.6 μm band of forsterite is sensitive to changes in the density and the geometry of the emitting dust shell, and so a less robust indicator. Applying our method to six high mass-loss rate AGB stars shows that AGB stars can have forsterite abundances of 12% by mass and higher, which is more than the previously found maximum abundance of 5%.

astro-ph.SR↗

arXiv2010

The lunar phases of dust grains orbiting Fomalhaut

Optical images of the nearby star Fomalhaut show a ring of dust orbiting the central star. This dust is in many respects expected to be similar to the zodiacal dust in the solar system. The ring displays a clear brightness asymmetry, attributed to asymmetric scattering of the central starlight by the circumstellar dust grains. Recent measurements show that the bright side of the Fomalhaut ring is oriented away from us. This implies that the grains in this system scatter most of the light in the backward direction, in sharp contrast to the forward-scattering nature of the grains in the solar system. In this letter, we show that grains considerably larger than those dominating the solar system zodiacal dust cloud provide a natural explanation for the apparent backward scattering behavior. In fact, we see the phases of the dust grains in the same way as we can observe the phases of the Moon and other large solar system bodies. We outline how the theory of the scattering behavior of planetesimals can be used to explain the Fomalhaut dust properties. This indicates that the Fomalhaut dust ring is dominated by very large grains. The material orbiting Fomalhaut, which is at the transition between dust and planetesimals, can, with respect to their optical behavior, best be described as micro-asteroids.

astro-ph.EP↗

arXiv2009

The Inner Rim Structures of Protoplanetary Discs

The inner boundary of protoplanetary discs is structured by the dramatic opacity changes at the transition from the dust-containing to a dust-free zone. This paper explores the variety and limits of inner rim structures in passively heated dusty discs. For this study, we implemented detailed sublimation physics in a fast Monte Carlo radiative transfer code. We show that the inner rim in dusty discs is not an infinitely sharp wall but a diffuse region which may be narrow or wide. Furthermore, high surface densities and large silicate grains as well as iron and corundum grains decrease the rim radius, from a 2.2AU radius for small silicates around a 47 Solar luminosity Herbig Ae star typically to 0.4AU and as close as 0.2AU. A passive disc with grain growth and a diverse dust composition must thus have a small inner rim radius. Finally, an analytical expression is presented for the rim location as a function of dust, disc and stellar properties.

astro-ph.GA↗

arXiv2009

Laboratory-based grain-shape models for simulating dust infrared spectra

Analysis of thermal dust emission spectra for dust mineralogy and physical grain properties depends on laboratory-measured or calculated comparison spectra. Often, the agreement between these two kinds of spectra is not satisfactory because of the strong influence of the grain morphology on the spectra. We investigate the ability of the statistical light-scattering model with a distribution of form factors (DFF model) to reproduce experimentally measured infrared extinction spectra for particles that are small compared to the wavelength. We take advantage of new experimental spectra measured for free particles dispersed in air with accompanying information on the grain morphology. For the calculations, we used DFFs that were derived for aggregates of spherical grains, as well as for compact grain shapes corresponding to Gaussian random spheres. Irregular particle shapes require a DFF similar to that of a Gaussian random sphere with sigma=0.3, whereas roundish grain shapes are best fitted with that of a fractal aggregate of a fractal dimension 2.4-1.8. In addition we used a fitting algorithm to obtain the best-fit DFFs for the various laboratory samples. In this way we can independently derive information on the shape of the grains from their infrared spectra. For anisotropic materials, different DFFs are needed for the different crystallographic axes. This is due to a theoretical problem, which is inherent to all models that are simply averaging the contributions of the crystallographic directions.

astro-ph.IM↗

arXiv2009

On the interplay between flaring and shadowing in disks around Herbig Ae/Be stars

Based on the SED, Herbig stars have been categorized into two observational groups, reflecting their overall disk structure: group I members have disks with a higher degree of flaring than their group II counterparts. We investigate the 5-35 um Spitzer IRS spectra of a sample of 13 group I sources and 20 group II sources. We focus on the continuum emission to study the underlying disk geometry. We have determined the [30/13.5] and [13.5/7] continuum flux ratios. The 7-um flux excess with respect to the stellar photosphere is measured, as a marker for the strength of the near-IR emission produced by the inner disk. We have compared our data to self-consistent passive-disk model spectra, for which the same quantities were derived. We confirm the literature result that the difference in continuum emission between group I and II sources can largely be explained by a different amount of small dust grains. However, we report a strong correlation between the [30/13.5] and [13.5/7] flux ratios for Meeus group II sources. Moreover, the [30/13.5] flux ratio decreases with increasing 7-um excess for all targets in the sample. To explain these correlations with the models, we need to introduce an artificial scaling factor for the inner disk height. In roughly 50% of the Herbig Ae/Be stars in our sample, the inner disk must be inflated by a factor 2 to 3 beyond what hydrostatic calculations predict. The total disk mass in small dust grains determines the degree of flaring. We conclude, however, that for any given disk mass in small dust grains, the shadowing of the outer (tens of AU) disk is determined by the scale height of the inner disk (1 AU). The inner disk partially obscures the outer disk, reducing the disk surface temperature. Here, for the first time, we prove these effects observationally.

astro-ph.SR↗

arXiv2009

Analysis of the infrared spectra of the peculiar post-AGB stars EPLyr and HD52961

Aim: We aim to study in detail the peculiar mineralogy and structure of the circumstellar environment of two binary post-AGB stars, EPLyr and HD52961. Both stars were selected from a larger sample of evolved disc sources observed with Spitzer and show unique solid-state and gas features in their infrared spectra. Moreover, they show a very small infrared excess in comparison with the other sample stars. Methods: The different dust and gas species are identified on the basis of high-resolution Spitzer-IRS spectra. We fit the full spectrum to constrain grain sizes and temperature distributions in the discs. This, combined with our broad-band spectral energy distribution and interferometric measurements, allows us to study the physical structure of the disc, using a self-consistent 2D radiative-transfer disc model. Results: We find that both stars have strong emission features due to CO_2 gas, dominated by ^{12}C^{16}O_2, but with clear ^{13}C^{16}O_2 and even ^{16}O^{12}C^{18}O isotopic signatures. Crystalline silicates are apparent in both sources but proved very hard to model. EP Lyr also shows evidence of mixed chemistry, with emission features of the rare class-C PAHs. Whether these PAHs reside in the oxygen-rich disc or in a carbon-rich outflow is still unclear. With the strongly processed silicates, the mixed chemistry and the low ^{12}C/^{13}C ratio, EP Lyr resembles some silicate J-type stars, although the depleted photosphere makes nucleosynthetic signatures difficult to probe. We find that the disc environment of both sources is, to a first approximation, well modelled with a passive disc, but additional physics such as grain settling, radial dust distributions, and an outflow component must be included to explain the details of the observed spectral energy distributions in both stars.

astro-ph.SR↗

arXiv2009

Benchmark problems for continuum radiative transfer. High optical depths, anisotropic scattering, and polarisation

Solving the continuum radiative transfer equation in high opacity media requires sophisticated numerical tools. In order to test the reliability of such tools, we present a benchmark of radiative transfer codes in a 2D disc configuration. We test the accuracy of seven independently developed radiative transfer codes by comparing the temperature structures, spectral energy distributions, scattered light images, and linear polarisation maps that each model predicts for a variety of disc opacities and viewing angles. The test cases have been chosen to be numerically challenging, with midplane optical depths up 10^6, a sharp density transition at the inner edge and complex scattering matrices. We also review recent progress in the implementation of the Monte Carlo method that allow an efficient solution to these kinds of problems and discuss the advantages and limitations of Monte Carlo codes compared to those of discrete ordinate codes. For each of the test cases, the predicted results from the radiative transfer codes are within good agreement. The results indicate that these codes can be confidently used to interpret present and future observations of protoplanetary discs.

astro-ph.SR↗

arXiv2009

Radiative transfer in very optically thick circumstellar disks

In this paper we present two efficient implementations of the diffusion approximation to be employed in Monte Carlo computations of radiative transfer in dusty media of massive circumstellar disks. The aim is to improve the accuracy of the computed temperature structure and to decrease the computation time. The accuracy, efficiency and applicability of the methods in various corners of parameter space are investigated. The effects of using these methods on the vertical structure of the circumstellar disk as obtained from hydrostatic equilibrium computations are also addressed. Two methods are presented. First, an energy diffusion approximation is used to improve the accuracy of the temperature structure in highly obscured regions of the disk, where photon counts are low. Second, a modified random walk approximation is employed to decrease the computation time. This modified random walk ensures that the photons that end up in the high-density regions can quickly escape to the lower density regions, while the energy deposited by these photons in the disk is still computed accurately. A new radiative transfer code, MCMax, is presented in which both these diffusion approximations are implemented. These can be used simultaneously to increase both computational speed and decrease statistical noise. We conclude that the diffusion approximations allow for fast and accurate computations of the temperature structure, vertical disk structure and observables of very optically thick circumstellar disks.

astro-ph.IM↗

arXiv2008

SPITZER survey of dust grain processing in stable discs around binary post-AGB stars

Aims: We investigate the mineralogy and dust processing in the circumbinary discs of binary post-AGB stars using high-resolution TIMMI2 and SPITZER infrared spectra. Methods: We perform a full spectral fitting to the infrared spectra using the most recent opacities of amorphous and crystalline dust species. This allows for the identification of the carriers of the different emission bands. Our fits also constrain the physical properties of different dust species and grain sizes responsible for the observed emission features. Results: In all stars the dust is oxygen-rich: amorphous and crystalline silicate dust species prevail and no features of a carbon-rich component can be found, the exception being EPLyr, where a mixed chemistry of both oxygen- and carbon-rich species is found. Our full spectral fitting indicates a high degree of dust grain processing. The mineralogy of our sample stars shows that the dust is constituted of irregularly shaped and relatively large grains, with typical grain sizes larger than 2 micron. The spectra of nearly all stars show a high degree of crystallinity, where magnesium-rich end members of olivine and pyroxene silicates dominate. Other dust features of e.g. silica or alumina are not present at detectable levels. Temperature estimates from our fitting routine show that a significant fraction of grains must be cool, significantly cooler than the glass temperature. This shows that radial mixing is very efficient is these discs and/or indicates different thermal conditions at grain formation. Our results show that strong grain processing is not limited to young stellar objects and that the physical processes occurring in the discs are very similar to those in protoplanetary discs.

astro-ph↗