arXiv subjects

M. Morales

Publications and source records attributed to M. Morales.

10 recordsLinked to original sources

arXiv2026

The Murchison Widefield Array Phase III upgrade: Sensitivity Doubled, Number of Baselines Quadrupled, Flexibility Enhanced, and EoR Observations Optimised

We describe the latest iteration of upgrades (designated Phase III) to the Murchison Widefield Array (MWA), in the fourth paper in a series that covers the evolution of the telescope from design concept to initial operational facility, and through two major upgrades. As part of the Phase III upgrade of the MWA, we report the completion of work to design, build, and deploy a new fleet of digital receivers that further optimise the MWA for Epoch of Reionisation observations. These receivers complement existing receivers, such that the MWA now supports the full correlation of all 256 antenna tiles currently in the array. This step releases the MWA from the prior constraint of having to correlate only 128 of the 256 tiles at any given time, which means that the maximum instantaneous sensitivity of the MWA is doubled and the maximum number of interferometric baselines is approximately quadrupled. The upgrade is fundamentally enabled by the new MWAX correlator and various other improvements to the MWA sub-systems. In this paper we describe the new digital receivers and the other improvements that result in the Phase III system. A range of operational benefits arise from the upgrade and scientific flexibility is increased. We also comment on the transition from the MWA to the SKA-Low facility near the end of the decade, including a description of some unique science opportunities utilising joint MWA/SKA-Low data during the Science Verification phase of the SKA-Low Array Assembly 2 (AA2) period.

astro-ph.IM↗

arXiv2023

Cryogenic RPWELL: a novel charge-readout element for dual-phase argon TPCs

The first operation of a cryogenic Resistive Plate WELL (RPWELL) detector in the saturated vapor of liquid argon is reported. The RPWELL detector was composed of a Thick Gas Electron Multiplier (THGEM) electrode coupled to a metallic anode via Fe$_2$O$_3$/YSZ ceramics (Fe$_2$O$_3$ in weight equal to 75$\%$), with tunable bulk resistivity in the range 10$^{9}$ - 10$^{12}$ $\Omega\cdot$cm. The detector was operated at liquid argon temperature in saturated argon vapor (90~K, 1.2~bar) and characterized in terms of its effective charge gain and stability against discharges. Maximum stable gain of G$\approx$17 was obtained, without discharges. In addition, preliminary results from novel 3D-printed thermoplastic plates doped with carbon nanotubes are presented.

physics.ins-det↗

arXiv2023

Development of Fe$_2$O$_3$/YSZ ceramic plates for cryogenic operation of resistive-protected gaseous detectors

We present a ceramic material based on hematite (Fe$_2$O$_3$) and zirconia stabilized with yttria at 8% molar (YSZ), that exhibits stable electrical properties with transported charge and that can be tuned to the resistivities necessary to induce spark-quenching in gaseous detectors ($\rho = 10^9-10^{12}$ $\Omega \cdot$cm), from room temperature down to the liquid-vapor coexistence point of nitrogen (77 K). It, thus, allows covering the operating temperatures of most immediate interest to gaseous instrumentation. The ceramics have been produced in a region of mass concentrations far from what has been usually explored in literature: optimal characteristics are achieved for Fe$_2$O$_3$ concentrations of 75%wt (LAr boiling temperature), 35%wt (LXe boiling temperature), and 100%wt (room temperature). The nine order of magnitude enhancement observed for the electrical conductivity of the mixed phases relative to that of pure Fe$_2$O$_3$ is startling, however it can be qualitatively understood based on existing literature. Plates of 4 cm x 4 cm have been manufactured and, prior to this work, operated in-detector at the LXe boiling point (165 K), demonstrating spark-free operation. Preliminary results obtained for the first time on a spark-protected amplification structure (RP-WELL) at around the LAr boiling point (90 K) are now presented, too.

physics.ins-det↗

arXiv2019

First results of Resistive-Plate Well (RPWELL) detector operation at 163 K

We present for the first time, discharge-free operation at cryogenic conditions of a Resistive-Plate WELL (RPWELL) detector. It is a single-sided Thick Gaseous Electron Multiplier (THGEM) coupled to a readout anode via a plate of high bulk resistivity. The results of single- and double-stage RPWELL detectors operated in stable conditions in Ne/5$\%$CH$_{4}$ at 163 K are summarized. The RPWELL comprised a ferric-based (Fe$^{3+}$) ceramic composite ("Fe-ceramic") as the resistive plate, of volume resistivity $\sim$$10^{11}$ $Ω$$\cdot$cm at this temperature. Gains of $\sim$$10^{4}$ and $\sim$$10^{5}$ were reached with the single-stage RPWELL, with 6 keV X-rays and single UV-photons, respectively. The double-stage detector, a THGEM followed by the RPWELL, reached gains $\sim$$10^{5}$ and $\sim$$10^{6}$ with X-rays and single UV-photons, respectively. The results were obtained with and without a CsI photocathode on the first multiplying element. Potential applications at these cryogenic conditions are discussed.

physics.ins-det↗

arXiv2016

A mesoscopic model for binary fluids

We propose a model to study symmetric binary fluids, based in the mesoscopic molecular simulation technique known as multiparticle collision, where space and state variables are continuous while time is discrete. We include a repulsion rule to simulate segregation processes that does not require the calculation of the interaction forces between particles, thus allowing the description of binary fluids at a mesoscopic scale. The model is conceptually simple, computationally efficient, maintains Galilean invariance, and conserves the mass and the energy in the system at micro and macro scales; while momentum is conserved globally. For a wide range of temperatures and densities, the model yields results in good agreement with the known properties of binary fluids, such as density profile, width of the interface, phase separation and phase growth. We also apply the model to study binary fluids in crowded environments with consistent results.

nlin.AO↗

arXiv2014

Effect of bombarding steel with Xe$^+$ ions on the surface nanostructure and on pulsed plasma nitriding process

The modification of steel (AISI 316L and AISI 4140) surface morphology and underlying inter-crystalline grains strain due to Xe$^+$ ion bombardment are reported to affect nitrogen diffusion after a pulsed plasma nitriding process. The ion bombardment induces regular nanometric patterns and increases the roughness of the material surface. The strain induced by the noble gas bombardment is observed in depths which are orders of magnitude larger than the projectiles' stopping distance. The pre-bombarded samples show peculiar microstructures formed in the nitrided layers, modifying the in-depth hardness profile. Unlike the double nitrided layer normally obtained in austenitic stainless steel by pulsed plasma nitriding process, the Xe$^+$ pre-bombardment treatment leads to a single thick compact layer. In nitrided pre-bombarded AISI 4140 steel, the diffusion zone shows long iron nitride needle-shaped precipitates, while in non-pre-bombarded samples finer precipitates are distributed in the material.

cond-mat.mtrl-sci↗

arXiv2014

Structural analysis of strained LaVO$_3$ thin films

While structure refinement is routinely achieved for simple bulk materials, the accurate structural determination still poses challenges for thin films due on the one hand to the small amount of material deposited on the thicker substrate and, on the other hand, to the intricate epitaxial relationships that substantially complicate standard X-ray diffraction analysis. Using a combined approach, we analyze the crystal structure of epitaxial LaVO$_3$ thin films grown on (100)-oriented SrTiO$_3$. Transmission electron microscopy study reveals that the thin films are epitaxially grown on SrTiO$_3$ and points to the presence of 90$^{\circ}$ oriented domains. The mapping of the reciprocal space obtained by high resolution X-ray diffraction permits refinement of the lattice parameters. We finally deduce that strain accommodation imposes a monoclinic structure onto the LaVO$_3$ film. The reciprocal space maps are numerically processed and the extracted data computed to refine the atomic positions, which are compared to those obtained using precession electron diffraction tomography. We discuss the obtained results and our methodological approach as a promising thin film structure determination for complex systems.

cond-mat.mtrl-sci↗

arXiv2014

Structural characterization of PrVO3 epitaxial thin films

Rare earth perovskite oxides constitute a wide family of materials presenting functional proper- ties strongly coupled to their crystalline structure. Here, we report on the experimental results on epitaxial PrVO3 deposited on SrTiO3 single crystal substrates by pulsed laser deposition. By com- bining advanced structural characterization tools, we have observed that the PVO unrelaxed film structure grown on STO, is characterized by two kinds of oriented domains whose epitaxial relations are: (i) PrVO3[110]o//SrTiO3[001]c and PrVO3[001]o//SrTiO3[100]c, (ii) PrVO3[110]o//SrTiO3[001]c and PrVO3[001]o//SrTiO3[010]c. We have also measured reciprocal space maps. From these results, we have determined that the PVO film epitaxy on STO imposes a lowering of the PVO structure symmetry from orthorhombic (Pbnm) to monoclinic (P21/m). We show, the nominal strain induced by the substrate being constant, that the obtained film structure depends on both growth oxygen and temperature. Thus, by finely controlling the deposition conditions, we could tune the strain experienced by PrVO3 thin film. These results show an alternative to substrate mismatch as a path to control the strain and structure of PVO films.

physics.chem-ph↗

arXiv2013

On the boundary as an $x$-geodominating set in graphs

Given a graph $G$ and a vertex $x\in V(G)$, a vertex set $S \subseteq V(G)$ is an $x$-geodominating set of $G$ if each vertex $v\in V(G)$ lies on an $x-y$ geodesic for some element $y\in S$. The minimum cardinality of an $x$-geodominating set of $G$ is defined as the $x$-geodomination number of $G$, $g_x(G)$, and an $x$-geodominating set of cardinality $g_x(G)$ is called a $g_x$-set and it is known that it is unique for each vertex $x$. We prove that, in any graph $G$, the $g_x$-set associated to a vertex $x$ is the set of boundary vertices of $x$, that is $\partial(x)= \{v \in V(G) : \forall w \in N(v): d(x,w) \leq d(u, v)\}$. This characterization of $g_x$-sets allows to deduce, on a easy way, different properties of these sets and also to compute both $g_x$-sets and $x$-geodomination number $g_x(G)$, in graphs obtained using different graphs products: cartesian, strong and lexicographic.

math.CO↗

arXiv2009

Performances of multi-gap timing RPCs for relativistic ions in the range Z=1-6

We present the performance of Multi-gap timing RPCs under irradiation by fully stripped relativistic ions (gamma*beta=2.7, Z=1-6). A time resolution of 80 ps at high efficiency has been obtained by just using standard `off the shelf' 4-gap timing RPCs from the new HADES ToF wall. The resolution worsened to 100 ps for ~ 1 kHz/cm2 proton flux and for ~ 100 Hz/cm2 Carbon flux. The chambers were operated at a standard field of E=100 kV/cm and showed a high stability during the experiment, supporting the fact that RPCs are a convenient choice when accommodating a very broad range of ionizing particles is needed. The data provides insight in the region of very highly ionizing particles (up to x 36 mips) and can be used to constrain the existing avalanche and Space-Charge models far from the usual `mip valley'. The implications of these results for the general case of detection based on secondary processes (n, gamma) resulting in highly ionizing particles with characteristic energy distributions will be discussed, together with the nature of the time-charge correlation curve.

nucl-ex↗