arXiv subjects

M. Pancrazzi

Publications and source records attributed to M. Pancrazzi.

16 recordsLinked to original sources

arXiv2026

A view of the evolution of a CME and the associated wave-trains at high spatial and temporal resolution

Context. Studying the kinematic and dynamic evolution of fast eruptive events from the middle to high solar corona is a primary objective of the Metis coronagraph on Solar Orbiter. During perihelion, Metis acquires visible light images at a 20s cadence, reaching a spatial resolution of around 2000 km at 0.28 au. This enables capturing coronal mass ejections (CMEs) and transient structures with unprecedented spatial and temporal resolution. Aims. On October 8-9, 2022, an extensive CME was observed by Metis at 0.3 au (resolution: 4.4 $10^{3}$ km/pixel). We aim to exploit this high resolution to resolve multiple substructures within the CME front, revealing plasma elements with distinct trajectories and speeds to provide a detailed kinematic characterization of the eruption. Methods. A normalization-based running difference algorithm was applied to enhance the complex morphology. Height-time diagrams were used to estimate propagation speeds and frequency variations. A 3D flux rope reconstruction, combined with multi-spacecraft coronagraphs and disk imagers, enabled tracking the CME from its initiation in the lower corona to approximately 5 solar radii. Joint observations with Solar Orbiter EUI-FSI provided insights into the eruption's onset, while Metis captured its development into the middle corona. Results. Metis observations resolve the CME's fine structure and internal plasma motions. The detection of circular, fast-propagating wavefronts (500 km/s, 3 minute period) at the western flank suggests wave excitation and magnetic reconfiguration processes. Multiple interpretations are proposed for these coronal wave trains, including quasi periodic propagating fast modes, offering new insights into wave generation and energy transport in the solar corona.

astro-ph.SR↗

arXiv2025

First detection of acoustic-like flux in the middle solar corona

Waves are thought to play a significant role in the heating of the solar atmosphere and the acceleration of the wind. Among the many types of waves observed in the Sun, the so-called p-modes with a 3 mHz frequency peak dominate the lower atmosphere. In the presence of magnetic fields, these waves can be converted into magnetohydrodynamic modes, which then leak into the corona through magnetic conduits. High-resolution off-limb observations have indeed revealed signatures of ubiquitous and global 3 mHz oscillations in the corona, although limited to low heights and to incompressible modes. We present high-cadence, high-resolution observations of the corona in the range 1.7 - 3.6 solar radii taken in broad-band 580-640 nm visible light by the Metis coronagraph aboard Solar Orbiter. These observations were designed to investigate density fluctuations in the middle corona. The data were acquired over several days in March 2022, October 2022, and for two days in April 2023. We selected representative regions of the corona on three sample dates. Analysis of the data in those regions revealed the presence of periodic density fluctuations. By examining several time-distance diagrams, we determined the main properties (apparent propagation speed, amplitude) of those fluctuations. We also show power spectra in selected locations in order to determine the dominant frequencies. We found wave-like, compressible fluctuations of low amplitude - of the order of 0.1 % of the background - in several large-scale regions in the corona at least up to 2.5 solar radii. We also found that the apparent propagation speeds of these perturbations typically fall in the range 150 - 450 km/s. A power spectrum analysis of time series revealed an excess power in the range 2-7 mHz, often with peaks at 3 or 5 mHz, i.e. in a range consistent with p-mode frequencies of the lower solar atmosphere.

astro-ph.SR↗

arXiv2025

Metis Observations of Alfv\'{e}nic Outflows Driven by Interchange Reconnection in a Pseudostreamer

This study presents observations of a large pseudostreamer solar eruption and, in particular, the post-eruption relaxation phase, as captured by Metis onboard the Solar Orbiter on October 12, 2022, during its perihelion passage. Utilizing total brightness data, we observe the outward propagation of helical features up to 3 solar radii along a radial column that appears to correspond to the stalk of the pseudostreamer. The helical structures persisted for more than 3 hours following a jet-like coronal mass ejection associated with a polar crown prominence eruption. A notable trend is revealed: the inclination of these features decreases as their polar angle and height increase. Additionally, we measured their helix pitch. Despite a 2-minute time cadence limiting direct correspondence among filamentary structures in consecutive frames, we find that the Metis helical structure may be interpreted as a consequence of twist (nonlinear torsional Alfv\'{e}n waves) and plasma liberated by interchange reconnection. A comparison was performed of the helix parameters as outlined by fine-scale outflow features with those obtained from synthetic white-light images derived from the high-resolution magnetohydrodynamics simulation of interchange reconnection in a pseudostreamer topology by Wyper et al. (2022). A remarkable similarity between the simulation-derived images and the observations was found. We conjecture that these Metis observations may represent the upper end in spatial and energy scale of the interchange reconnection process that has been proposed recently as the origin of the Alfv\'{e}nic solar wind.

astro-ph.SR↗

arXiv2024

Study of solar brightness profiles in the 18-26 GHz frequency range with INAF radio telescopes II. Evidence for coronal emission

One of the most important objectives of solar physics is the physical understanding of the solar atmosphere, the structure of which is also described in terms of the density (N) and temperature (T) distributions of the atmospheric matter. Several multi-frequency analyses show that the characteristics of these distributions are still debated, especially for the outer coronal emission. We aim to constrain the T and N distributions of the solar atmosphere through observations in the centimetric radio domain. We employ single-dish observations from two of the INAF radio telescopes at the K-band frequencies (18 - 26 GHz). We investigate the origin of the significant brightness temperature ($T_B$) level that we detected up to the upper corona ($\sim 800$ Mm of altitude with respect to the photospheric solar surface). To probe the physical origin of the atmospheric emission and to constrain instrumental biases, we reproduced the solar signal by convolving specific 2D antenna beam models. The analysis of the solar atmosphere is performed by adopting a physical model that assumes the thermal bremsstrahlung as the emission mechanism, with specific T and N distributions. The modelled $T_B$ profiles are compared with those observed by averaging solar maps obtained during the minimum of solar activity (2018 - 2020). The T and N distributions are compatible (within $25\%$ of uncertainty) with the model up to $\sim 60$ Mm and $\sim 100$ Mm of altitude, respectively. The analysis of the role of the antenna beam pattern on our solar maps proves the physical nature of the atmospheric emission in our images up to the coronal tails seen in our $T_B$ profiles. The challenging analysis of the coronal radio emission at higher altitudes, together with the data from satellite instruments will require further multi-frequency measurements.

astro-ph.SR↗

arXiv2023

Eruptive events with exceptionally bright emission in HI Ly-alpha observed by the Metis coronagraph

Metis, the coronagraph on board Solar Orbiter, provides for the first time coronagraphic imaging in the ultraviolet HI Ly-alpha line and, simultaneously, in polarized visible light, thus providing a host of information on the properties of CMEs and solar eruptions like their overall dynamics, time evolution, mass content, and outflow propagation velocity in the expanding corona. We analyzed in this work six CMEs observed by Metis between April and October 2021, which are characterized by a very strong HI Ly-alpha emission. We studied in particular the morphology, kinematics, and the temporal and radial evolution of the emission of such events, focusing on the brightest UV features. The kinematics of the eruptive events under consideration were studied by determining the height-time profiles of the brightest parts on the Metis plane of the sky. Furthermore, the 3D position in the heliosphere of the CMEs were determined by employing co-temporal images from two other coronagraphs: LASCO/C2 onboard SOHO, and COR2 onboard STEREO-A. Finally, the radiometrically calibrated Metis images of the bright UV features were analyzed to provide estimates of their volume and density. From the kinematics and radiometric analyses, we obtained indications of the temperatures of the bright UV cores of these events. The analysis of these strong UV-emitting features associated with coronal mass ejections demonstrates the capabilities of the current constellation of space coronagraphs, Metis, LASCO/C2, and COR2, in providing a complete characterization of the structure and dynamics of eruptive events in their propagation phase from their inception up to several solar radii. Furthermore, we show how the unique capabilities of the Metis instrument to observe these events in both HI Ly-alpha line and polarized VL radiation allow plasma diagnostics on the thermal state of these events.

astro-ph.SR↗

arXiv2023

Slow wind belt in the quiet solar corona

The slow solar wind belt in the quiet corona, observed with the Metis coronagraph on board Solar Orbiter on May 15, 2020, during the activity minimum of the cycle 24, in a field of view extending from 3.8 $R_\odot$ to 7.0 $R_\odot$, is formed by a slow and dense wind stream running along the coronal current sheet, accelerating in the radial direction and reaching at 6.8 $R_\odot$ a speed within 150 km s$^{-1}$ and 190 km s$^{-1}$, depending on the assumptions on the velocity distribution of the neutral hydrogen atoms in the coronal plasma. The slow stream is separated by thin regions of high velocity shear from faster streams, almost symmetric relative to the current sheet, with peak velocity within 175 km s$^{-1}$ and 230 km s$^{-1}$ at the same coronal level. The density-velocity structure of the slow wind zone is discussed in terms of the expansion factor of the open magnetic field lines that is known to be related to the speed of the quasi-steady solar wind, and in relation to the presence of a web of quasi separatrix layers, S-web, the potential sites of reconnection that release coronal plasma into the wind. The parameters characterizing the coronal magnetic field lines are derived from 3D MHD model calculations. The S-web is found to coincide with the latitudinal region where the slow wind is observed in the outer corona and is surrounded by thin layers of open field lines expanding in a non-monotonic way.

astro-ph.SR↗

arXiv2023

In-flight validation of Metis Visible-light Polarimeter Coronagraph on board Solar Orbiter

Context. The Metis coronagraph is one of the remote-sensing instruments of the ESA/NASA Solar Orbiter mission. Metis is aimed at the study of the solar atmosphere and solar wind by simultaneously acquiring images of the solar corona at two different wavelengths; visible-light (VL) within a band ranging from 580 nm to 640 nm, and in the HI Ly-alpha 121.6 +/- 10 nm ultraviolet (UV) light. The visible-light channel includes a polarimeter with electro-optically modulating Liquid Crystal Variable Retarders (LCVRs) to measure the linearly polarized brightness of the K-corona to derive the electron density. Aims. In this paper, we present the first in-flight validation results of the Metis polarimetric channel together with a comparison to the on-ground calibrations. It is the validation of the first use in deep space (with hard radiation environment) of an electro-optical device: a liquid crystal-based polarimeter. Methods. We used the orientation of the K-corona's linear polarization vector during the spacecraft roll maneuvers for the in-flight calibration. Results. The first in-flight validation of the Metis coronagraph on-board Solar Orbiter shows a good agreement with the on-ground measurements. It confirms the expected visible-light channel polarimetric performance. A final comparison between the first pB obtained by Metis with the polarized brightness (pB) obtained by the space-based coronagraph LASCO and the ground-based coronagraph KCor shows the consistency of the Metis calibrated results.

astro-ph.SR↗

arXiv2022

A Coronal Mass Ejection followed by a prominence eruption and a plasma blob as observed by Solar Orbiter

On February 12, 2021 two subsequent eruptions occurred above the West limb, as seen along the Sun-Earth line. The first event was a typical slow Coronal Mass Ejection (CME), followed $\sim 7$ hours later by a smaller and collimated prominence eruption, originating Southward with respect to the CME, followed by a plasma blob. These events were observed not only by SOHO and STEREO-A missions, but also by the suite of remote sensing instruments on-board Solar Orbiter (SolO). This work shows how data acquired by the Full Sun Imager (FSI), Metis coronagraph, and Heliospheric Imager (SoloHI) from the SolO perspective can be combined to study the eruptions and the different source regions. Moreover, we show how Metis data can be analyzed to provide new information about solar eruptions. Different 3D reconstruction methods were applied to the data acquired by different spacecraft including remote sensing instruments on-board SolO. Images acquired by both Metis channels in the Visible Light (VL) and H I Lyman$-α$ line (UV) were combined to derive physical information on the expanding plasma. The polarization ratio technique was also applied for the first time to the Metis images acquired in the VL channel. The two eruptions were followed in 3D from their source region to their expansion in the intermediate corona. Thanks to the combination of VL and UV Metis data, the formation of a post-CME Current Sheet (CS) was followed for the first time in the intermediate corona. The plasma temperature gradient across a post-CME blob propagating along the CS was also measured for the first time. Application of the polarization ratio technique to Metis data shows that, thanks to the combination of four different polarization measurements, the errors are reduced by $\sim 5-7$\%, thus better constraining the 3D distribution of plasma.

astro-ph.SR↗

arXiv2021

Effects of the chromospheric Lyα line profile shape on the determination of the solar wind HI outflow velocity using the Doppler dimming technique

The determination of solar wind outflow velocity is fundamental in order to probe the mechanisms of wind acceleration in the corona. We aim to study, via the Doppler dimming technique, the effects that the chromospheric Lyα line profile shape causes on the determination of the outflow speed of coronal HI atoms. The Doppler dimming technique takes into account the decrease of coronal Lyα radiation in regions where HI atoms flow out in the solar wind. Starting from UV observations (UVCS/SOHO) of the coronal Lyα line and simultaneous measurements of pB (LASCO/SOHO and Mk3/MLSO), we studied the effect of the pumping chromospheric Lyα line profile through measurements from SOHO/SUMER, UVSP/SMM and LPSP/OSO-8, taken from representative on-disk regions and as a function of time during the solar activity cycle. In particular, we considered the effect of four chromospheric line parameters: line width, depth of the central reversal, asymmetry and distance of the peaks. We find that the range of variability of these parameters is of about 50% for the width, 69% for the depth of the central reversal, 35% for the asymmetry, and 50% for the distance of the peaks. Then, we find that the variability of the pumping Lyα profile affects the estimates of the coronal HI velocity by about 9-12%. Therefore, this uncertainty is smaller than other physical quantities uncertainties, and a constant in time and unique shape of the Lyα profile over the solar disk can be adopted in order to estimate the solar wind outflow velocity.

astro-ph.SR↗

arXiv2021

First light observations of the solar wind in the outer corona with the Metis coronagraph

The investigation of the wind in the solar corona initiated with the observations of the resonantly scattered UV emission of the coronal plasma obtained with UVCS-SOHO, designed to measure the wind outflow speed by applying the Doppler dimming diagnostics. Metis on Solar Orbiter complements the UVCS spectroscopic observations, performed during solar activity cycle 23, by simultaneously imaging the polarized visible light and the HI Ly-alpha corona in order to obtain high-spatial and temporal resolution maps of the outward velocity of the continuously expanding solar atmosphere. The Metis observations, on May 15, 2020, provide the first HI Ly-alpha images of the extended corona and the first instantaneous map of the speed of the coronal plasma outflows during the minimum of solar activity and allow us to identify the layer where the slow wind flow is observed. The polarized visible light (580-640 nm), and the UV HI Ly-alpha (121.6 nm) coronal emissions, obtained with the two Metis channels, are combined in order to measure the dimming of the UV emission relative to a static corona. This effect is caused by the outward motion of the coronal plasma along the direction of incidence of the chromospheric photons on the coronal neutral hydrogen. The plasma outflow velocity is then derived as a function of the measured Doppler dimming. The static corona UV emission is simulated on the basis of the plasma electron density inferred from the polarized visible light. This study leads to the identification, in the velocity maps of the solar corona, of the high-density layer about +/-10 deg wide, centered on the extension of a quiet equatorial streamer present at the East limb where the slowest wind flows at about (160 +/- 18) km/s from 4 Rs to 6 Rs. Beyond the boundaries of the high-density layer, the wind velocity rapidly increases, marking the transition between slow and fast wind in the corona.

astro-ph.SR↗

arXiv2021

Cosmic-ray flux predictions and observations for and with Metis on board Solar Orbiter

The Metis coronagraph is one of the remote sensing instruments hosted on board the ESA/NASA Solar Orbiter mission. Metis is devoted to carry out the first simultaneous imaging of the solar corona in both visible light (VL) and ultraviolet (UV). High-energy particles penetrate spacecraft materials and may limit the performance of on-board instruments. A study of galactic cosmic-ray (GCR) tracks observed in the first VL images gathered by Metis during the commissioning phase for a total of 60 seconds of exposure time is presented here. A similar analysis is planned for the UV channel. A prediction of the GCR flux up to hundreds of GeV is made here for the first part of the Solar Orbiter mission to study the Metis coronagraph performance. GCR model predictions are compared to observations gathered on board Solar Orbiter by the EPD/HET experiment in the range 10 MeV-100 MeV in the summer 2020 and with previous measurements. Estimated cosmic-ray fluxes above 70 MeV n$^{-1}$ have been also parameterized and used for Monte Carlo simulations aiming at reproducing the cosmic-ray track observations in the Metis coronagraph VL images. The same parameterizations can also be used to study the performance of other detectors. By comparing observations of cosmic-ray tracks in the Metis VL images with FLUKA Monte Carlo simulations of cosmic-ray interactions in the VL detector, it is found that cosmic rays fire a fraction of the order of 10$^{-4}$ of the whole image pixel sample. Therefore, cosmic rays do not affect sensibly the quality of Metis VL images. It is also found that the overall efficiency for cosmic-ray identification in the Metis VL images is approximately equal to the contribution of Z$>$2 particles. As a result, the Metis coronagraph may play the role of a proton monitor for long-term GCR variations during the overall mission duration.

astro-ph.IM↗

arXiv2019

Comparing extrapolations of the coronal magnetic field structure at 2.5 solar radii with multi-viewpoint coronagraphic observations

The magnetic field shapes the structure of the solar corona but we still know little about the interrelationships between the coronal magnetic field configurations and the resulting quasi-stationary structures observed in coronagraphic images (as streamers, plumes, coronal holes). One way to obtain information on the large-scale structure of the coronal magnetic field is to extrapolate it from photospheric data and compare the results with coronagraphic images. Our aim is to verify if this comparison can be a fast method to check systematically the reliability of the many methods available to reconstruct the coronal magnetic field. Coronal fields are usually extrapolated from photospheric measurements typically in a region close to the central meridian on the solar disk and then compared with coronagraphic images at the limbs, acquired at least 7 days before or after to account for solar rotation, implicitly assuming that no significant changes occurred in the corona during that period. In this work, we combine images from three coronagraphs (SOHO/LASCO-C2 and the two STEREO/SECCHI-COR1) observing the Sun from different viewing angles to build Carrington maps covering the entire corona to reduce the effect of temporal evolution to ~ 5 days. We then compare the position of the observed streamers in these Carrington maps with that of the neutral lines obtained from four different magnetic field extrapolations, to evaluate the performances of the latter in the solar corona. Our results show that the location of coronal streamers can provide important indications to discriminate between different magnetic field extrapolations.

astro-ph.SR↗

arXiv2017

The ARIEL Instrument Control Unit design for the M4 Mission Selection Review of the ESA's Cosmic Vision Program

The Atmospheric Remote-sensing Infrared Exoplanet Large-survey mission (ARIEL) is one of the three present candidates for the ESA M4 (the fourth medium mission) launch opportunity. The proposed Payload will perform a large unbiased spectroscopic survey from space concerning the nature of exoplanets atmospheres and their interiors to determine the key factors affecting the formation and evolution of planetary systems. ARIEL will observe a large number (>500) of warm and hot transiting gas giants, Neptunes and super-Earths around a wide range of host star types, targeting planets hotter than 600 K to take advantage of their well-mixed atmospheres. It will exploit primary and secondary transits spectroscopy in the 1.2-8 um spectral range and broad-band photometry in the optical and Near IR (NIR). The main instrument of the ARIEL Payload is the IR Spectrometer (AIRS) providing low-resolution spectroscopy in two IR channels: Channel 0 (CH0) for the 1.95-3.90 um band and Channel 1 (CH1) for the 3.90-7.80 um range. It is located at the intermediate focal plane of the telescope and common optical system and it hosts two IR sensors and two cold front-end electronics (CFEE) for detectors readout, a well defined process calibrated for the selected target brightness and driven by the Payload's Instrument Control Unit (ICU).

astro-ph.IM↗

arXiv2014

EChO Payload electronics architecture and SW design

EChO is a three-modules (VNIR, SWIR, MWIR), highly integrated spectrometer, covering the wavelength range from 0.55 $μ$m, to 11.0 $μ$m. The baseline design includes the goal wavelength extension to 0.4 $μ$m while an optional LWIR module extends the range to the goal wavelength of 16.0 $μ$m. An Instrument Control Unit (ICU) is foreseen as the main electronic subsystem interfacing the spacecraft and collecting data from all the payload spectrometers modules. ICU is in charge of two main tasks: the overall payload control (Instrument Control Function) and the housekeepings and scientific data digital processing (Data Processing Function), including the lossless compression prior to store the science data to the Solid State Mass Memory of the Spacecraft. These two main tasks are accomplished thanks to the Payload On Board Software (P-OBSW) running on the ICU CPUs.

astro-ph.IM↗

arXiv2014

The Visible and Near Infrared module of EChO

The Visible and Near Infrared (VNIR) is one of the modules of EChO, the Exoplanets Characterization Observatory proposed to ESA for an M-class mission. EChO is aimed to observe planets while transiting by their suns. Then the instrument had to be designed to assure a high efficiency over the whole spectral range. In fact, it has to be able to observe stars with an apparent magnitude Mv= 9-12 and to see contrasts of the order of 10-4 - 10-5 necessary to reveal the characteristics of the atmospheres of the exoplanets under investigation. VNIR is a spectrometer in a cross-dispersed configuration, covering the 0.4-2.5 micron spectral range with a resolving power of about 330 and a field of view of 2 arcsec. It is functionally split into two channels respectively working in the 0.4-1 and 1.0-2.5 micron spectral ranges. Such a solution is imposed by the fact the light at short wavelengths has to be shared with the EChO Fine Guiding System (FGS) devoted to the pointing of the stars under observation. The spectrometer makes use of a HgCdTe detector of 512 by 512 pixels, 18 micron pitch and working at a temperature of 45K as the entire VNIR optical bench. The instrument has been interfaced to the telescope optics by two optical fibers, one per channel, to assure an easier coupling and an easier colocation of the instrument inside the EChO optical bench.

astro-ph.IM↗

arXiv2007

Field Camera Unit for WSO-UV: Phase A Study Report

World Space Observatory UltraViolet (WSO-UV) is a multipurpose space observatory, made by a 170 cm aperture telescope, capable of UV high-resolution spectroscopy, long slit low-resolution spectroscopy, and deep UV and optical imaging. With a nominal mission life time of 5 years, and a planned extension to 10 years, from a geosynchronous orbit with an inclination of 51.8 degrees, WSO-UV will provide observations of exceptional importance for the study of many unsolved astrophysical problems. WSO-UV is implemented in the framework of a collaboration between Russia (chair), China, Germany, Italy, Spain, and Ukraine. This book illustrates the results of the feasibility study for the Field Camera Unit (FCU), a multi-spectral radial instrument on the focal plane of WSO-UV. The book provides an overview of the key science topics that are drivers to the participation of the Italian astronomical community in the WSO-UV project. The science drivers here illustrated have been used to define the technical requirements for the conceptual and architectural design of the Field Camera Unit (FCU) focal plane instrument. In Chapter I we show that WSO-UV will give a significant contribution to solve the key astronomical problems individuated by the ASTRONET consortium, and which are driving the European Space Agency Cosmic Vision program. Chapter II elucidates the scientific requirements for WSO-UV FCU instrument, discussed in Chapter I, which are translated in a list of verifiable top level requirements usable to make the conceptual design of the FCU instrument. Chapter III is dedicated to the Field Camera Unit opto-mechanical design, its detectors and electronics subsystems. Finally, Chapter IV outlines the AIV and GSE plans and activities for the FCU instrument.

astro-ph↗