arXiv subjects

M. Pharr

Publications and source records attributed to M. Pharr.

5 recordsLinked to original sources

arXiv2026

Improved n=1 Empirical Error Field Penetration Threshold Scaling with Ohmic and L-Mode Conventional Tokamak Plasma Discharges

This paper presents an updated n=1 error field penetration threshold scaling, which increases fit quality compared to previous error field scaling laws, is produced from an expanded database, and exhibits reduced uncertainty in projections to future conventional tokamaks. It improves confidence in tokamak engineering tolerances, which are a significant driver of cost and time constraints on device construction. We add J-TEXT data, new JET data, and create the scaling using only conventional tokamak Ohmic and L-mode experiments. Since H-mode plasmas are more resilient to error field penetration, this scaling predicts what is likely the most dangerous regime of error field penetration for new tokamak designs. These decisions improve confidence in the error field penetration threshold scaling and its application in the construction and design decisions of any future conventional tokamak or FPP.

physics.plasm-ph↗

arXiv2026

SPARC Tokamak Error Field Expectations and Physics-Based Correction Coil Design

Non-axisymmetric magnetic field coils have been designed to provide efficient error field correction and suppress edge localized modes in SPARC - a compact high-field tokamak that is presently under construction at Commonwealth Fusion Systems. These designs utilize the Generalized Perturbed Equilibrium Code's (GPEC's) representation of the multi-modal, non-axisymmetric plasma response to optimize the geometric coupling between 3D coil arrays and the desired core or edge plasma response. Error field correction coils are designed to couple to the plasma-amplified kink that dominates the drive of core resonances. The maximum allowable error field is projected to SPARC using an empirical scaling that is consistent with linear and nonlinear MHD modeling expectations. Asymmetric construction and assembly tolerances are then balanced against the corresponding kA-turns needed for correction to levels below the allowable limit. These physics-driven coil designs provide confidence in our ability to operate SPARC in new high field tokamak regimes without error field induced locked modes.

physics.plasm-ph↗

arXiv2024

MANTA: A Negative-Triangularity NASEM-Compliant Fusion Pilot Plant

The MANTA (Modular Adjustable Negative Triangularity ARC-class) design study investigated how negative-triangularity (NT) may be leveraged in a compact, fusion pilot plant (FPP) to take a ``power-handling first" approach. The result is a pulsed, radiative, ELM-free tokamak that satisfies and exceeds the FPP requirements described in the 2021 National Academies of Sciences, Engineering, and Medicine report ``Bringing Fusion to the U.S. Grid". A self-consistent integrated modeling workflow predicts a fusion power of 450 MW and a plasma gain of 11.5 with only 23.5 MW of power to the scrape-off layer (SOL). This low $P_\text{SOL}$ together with impurity seeding and high density at the separatrix results in a peak heat flux of just 2.8 MW/m$^{2}$. MANTA's high aspect ratio provides space for a large central solenoid (CS), resulting in ${\sim}$15 minute inductive pulses. In spite of the high B fields on the CS and the other REBCO-based magnets, the electromagnetic stresses remain below structural and critical current density limits. Iterative optimization of neutron shielding and tritium breeding blanket yield tritium self-sufficiency with a breeding ratio of 1.15, a blanket power multiplication factor of 1.11, toroidal field coil lifetimes of $3100 \pm 400$ MW-yr, and poloidal field coil lifetimes of at least $890 \pm 40$ MW-yr. Following balance of plant modeling, MANTA is projected to generate 90 MW of net electricity at an electricity gain factor of ${\sim}2.4$. Systems-level economic analysis estimates an overnight cost of US\$3.4 billion, meeting the NASEM FPP requirement that this first-of-a-kind be less than US\$5 billion. The toroidal field coil cost and replacement time are the most critical upfront and lifetime cost drivers, respectively.

physics.plasm-ph↗

arXiv2023

TokaMaker: An open-source time-dependent Grad-Shafranov tool for the design and modeling of axisymmetric fusion devices

In this paper, we present a new static and time-dependent MagnetoHydroDynamic (MHD) equilibrium code, TokaMaker, for axisymmetric configurations of magnetized plasmas, based on the well-known Grad-Shafranov equation. This code utilizes finite element methods on an unstructured triangular grid to enable capturing accurate machine geometry and simple mesh generation from engineering-like descriptions of present and future devices. The new code is designed for ease of use without sacrificing capability and speed through a combination of Python, Fortran, and C/C++ components. A detailed description of the numerical methods of the code, including a novel formulation of the boundary conditions for free-boundary equilibria, and validation of the implementation of those methods using both analytic test cases and cross-code validation is shown. Results show expected convergence across tested polynomial orders for analytic and cross-code test cases.

physics.plasm-ph↗

arXiv2023

Simultaneous access to high normalized current, pressure, density, and confinement in strongly-shaped diverted negative triangularity plasmas

Strongly-shaped diverted negative triangularity (NT) plasmas in the DIII-D tokamak demonstrate simultaneous access to high normalized current, pressure, density, and confinement. NT plasmas are shown to exist across an expansive parameter space compatible with high fusion power production, revealing surprisingly good core stability properties that compare favorably to conventional positive triangularity plasmas in DIII-D. Non-dimensionalizing the operating space, edge safety factors below 3, normalized betas above 3, Greenwald density fractions above 1, and high-confinement mode (H-mode) confinement qualities above 1 are simultaneously observed, all with a robustly stable edge free from deleterious edge-localized mode instabilities. Scaling of the confinement time with engineering parameters reveals at least a linear dependence on plasma current although with significant power degradation, both in excess of expected H-mode scalings. These results increase confidence that NT plasmas are a viable approach to realize fusion power and open directions for future detailed study.

physics.plasm-ph↗