arXiv subjects

M. Rosmus

Publications and source records attributed to M. Rosmus.

11 recordsLinked to original sources

arXiv2026

Dimensional control of the band-gap crossover in layered lead iodide

Before assessing the suitability of a semiconductor for specific applications, the first question to ask is whether it possesses a direct or indirect band gap. This distinction is fundamental, as the operation of devices such as light-emitting diodes, solar cells, and photodetectors is closely tied to the band-gap nature. Semiconductors that exhibit a band-gap crossover, from indirect to direct or vice versa, offer enhanced versatility for optoelectronic applications. Prominent examples include transition metal dichalcogenides and the subject of this study, PbI2. The nature of the band gap, and its crossover, can only be directly determined in reciprocal space by tracking the valence-band maximum and conduction-band minimum. Here, we directly visualize the thickness-dependent crossover of PbI2 from an indirect to a direct band gap using angle-resolved photoemission spectroscopy. Our measurements reveal a shift of the valence-band maximum toward the Brillouin-zone center as the film thickness exceeds a monolayer. Supported by density functional theory calculations, our results show that this crossover is driven by interlayer interactions and the hybridization of iodine pz orbitals. These findings demonstrate the tunable electronic structure of PbI2 and its potential for optoelectronic applications.

cond-mat.mtrl-sci↗

arXiv2026

Magnetic Excitations of a Half-Filled Tl-based Cuprate

Strong electron correlations drive Mott insulator transitions. Yet, there exists no framework to classify Mott insulators by their degree of correlation. Cuprate superconductors, with their tunable doping and rich phase diagrams, offer a unique platform to investigate the evolution of these interactions. However, spectroscopic access to a clean half-filled Mott-insulating state is lacking in compounds with the highest superconducting onset temperature. To fill this gap, we introduce a pristine, half-filled thallium-based cuprate system, Tl$_2$Ba$_5$Cu$_4$O$_{x}$. Using high-resolution resonant inelastic x-ray scattering, we probe long-lived magnon excitations and uncover a pronounced kink in the magnon dispersion, marked by a simultaneous change in group velocity and lifetime broadening. Modeling the dispersion within a Hubbard-Heisenberg approach, we extract the interaction strength and compare it with other cuprate systems. Our results establish a cuprate universal relation between electron-electron interaction and magnon zone-boundary dispersion. Superconductivity seems to be optimal at intermediate correlation strength, suggesting an optimal balance between localization and itinerancy.

cond-mat.supr-con↗

arXiv2025

Correlated Structural and Optical Characterization during Van der Waals Epitaxy of PbI2 on Graphene

Van der Waals heterostructures of 2D layered materials have gained much attention due to their flexible electronic properties, which make them promising candidates for energy, sensing, catalytic, and biomedical applications. Lead iodide (PbI2), a 2D layered semiconductor material belonging to the metal halide family, shows a thickness-dependent band gap with an indirect-to-direct transition above one monolayer. It has emerged as an excellent candidate for photodetectors and is a key component in metal halide perovskites solar cells. In the current work, we investigated the growth dynamics and the real-time correlation between structural and optical properties of PbI2 layers deposited on graphene/SiC(0001) by Molecular Beam Epitaxy. The structural and optical properties are probed respectively by Grazing Incidence Fast Atom Diffraction and Surface Differential Reflectance Spectroscopy. The growth proceeds layer-by-layer in a van der Waals-like epitaxy, with the zigzag direction of PbI2 parallel to the armchair direction of graphene. Both techniques bring evidence of significant modifications of the structural, electronic, and optical properties of the first PbI2 monolayer, characterized by a 1% tensile strain that relaxes over 3 to 5 monolayers. For a single monolayer, Angle-Resolved Photoemission Spectroscopy reveals a charge transfer from graphene to PbI2, demonstrated by an energy shift of the order of 50 meV in the graphene band structure.

cond-mat.mes-hall↗

arXiv2025

Metallic layered materials with magnetic frustration: An ARPES view of the SmAuAl$_4$Ge$_2$ and TbAuAl$_4$Ge$_2$

Compounds of the new materials class LnTAl$_4$X$_2$ (Ln = lanthanide, X = tetrel, T = transition metal) host exotic magnetic phenomena due to geometric frustration induced by their triangular lattice. Complex spin arrangements, magnetic fluctuations and double magnetic transitions have been well observed by means of magneto-transport. Nevertheless, the experimental electronic structure of this family of materials has been poorly studied. We have investigated the experimental electronic structure of two members of this class of materials: SmAuAl$_4$Ge$_2$ and TbAuAl$_4$Ge$_2$. By means of Angle-Resolved PhotoEmission Spectroscopy (ARPES) accompanied by Density Functional Theory calculations (DFT), we reveal common trends and features, the important effect of localized spin moments on the electronic structure, the presence of surface-localized electronic states and the nature of the surface termination layer. Low-dimensionality, exchange interaction, and spin-orbit coupling are all important ingredients of the electronic structure.

cond-mat.str-el↗

arXiv2024

Emergent impervious band crossing in the bulk in topological nodal line semimetal ZrAs$_2$

Topological nodal-line semimetals represent a unique class of materials with intriguing electronic structures and rich of symmetries, hosting electronic states with nontrivial topological properties. Among these, ZrAs$_2$ stands out, characterized by its nodal lines in a momentum space, governed by nonsymmorphic symmetries. This study integrates angle-resolved photoemission spectroscopy (ARPES) with density functional theory (DFT) calculations to explore the electronic states of ZrAs$_2$. Our study provides experimental evidence of nonsymmorphic symmetry-protected band crossing and nodal lines in ZrAs$_2$. In ARPES scans, we observed a distinctive surface and bulk states at different photon energies associated with nodal lines. Our results, supported by calculations based on DFT, unveil such impervious band crossing anchored at specific points in the Brillouin zone, with particular emphasis on the S point. Surface bands and bulk states near the crossing are elucidated through slab calculations, corroborating experimental findings. These findings enhance our understanding of the electronic structure of ZrAs$_2$.

cond-mat.mtrl-sci↗

arXiv2024

Valley-Polarized quantum Hall phase in a strain-controlled Dirac system

In multivalley systems, the valley pseudospin offers rich physics going from encoding of information by its polarization (valleytronics), to exploring novel phases of matter when its degeneracy is changed. Here, by strain engineering, we reveal fully valley-polarized quantum Hall (QH) phases in the Pb1-xSnxSe Dirac system. Remarkably, when the valley energy splitting exceeds the fundamental band gap, we observe a bipolar QH phase, heralded by the coexistence of hole and electron chiral edge states at distinct valleys in the same quantum well. This suggests that spatially overlaid counter-propagating chiral edge states emerging at different valleys do not interfere with each other.

cond-mat.mes-hall↗

arXiv2023

Experimental observation of metallic states with different dimensionality in a quasi-1D charge density wave compound

TaTe$_4$ is a quasi-1D tetrachalcogenide that exhibits a CDW instability caused by a periodic lattice distortion. Recently, pressure-induced superconductivity has been achieved in this compound, revealing a competition between these different ground states and making TaTe$_4$ very interesting for fundamental studies. Although TaTe$_4$ exhibits CDW ordering below 475 K, transport experiments have reported metallic behavior with a resistivity plateau at temperatures lower than 10 K. In this paper, we study the electronic structure of TaTe$_4$ using a combination of high-resolution angle-resolved photoemission spectroscopy and density functional calculations. Our results reveal the existence of the long-sought metallic states. These states exhibit mixed dimensionality, while some of them might have potential topological properties.

cond-mat.str-el↗

arXiv2022

Electronic properties of TaAs2 topological semimetal investigated by transport and ARPES

We have performed electron transport and ARPES measurements on single crystals of transition metal dipnictide TaAs2 cleaved along the ($\overline{2}$ 0 1) surface which has the lowest cleavage energy. A Fourier transform of the Shubnikov-de Haas oscillations shows four different peaks whose angular dependence was studied with respect to the angle between the magnetic field and the [$\overline{2}$ 0 1] direction. The results indicate the elliptical shape of the Fermi surface cross-sections. Additionally, a mobility spectrum analysis was carried out, which also reveals at least four types of carriers contributing to the conductance (two kinds of electrons and two kinds of holes). ARPES spectra were taken on freshly cleaved ($\overline{2}$ 0 1) surface and it was found that bulk states pockets at the constant energy surface are elliptical, which confirms the magnetotransport angle dependent studies. First-principles calculations support the interpretation of the experimental results. The theoretical calculations better reproduce the ARPES data if the theoretical Fermi level is increased, which is due to a small n-doping of the samples. This shifts the Fermi level closer to the Dirac point, allowing to investigate the physics of the Dirac and Weyl points, making this compound a platform for the investigation of the Dirac and Weyl points in three-dimensional materials.

cond-mat.other↗

arXiv2021

Photoemission signature of momentum-dependent hybridization in CeCoIn$_5$

Hybridization between $f$ electrons and conduction bands ($c$-$f$ hybridization) is a driving force for many unusual phenomena. To provide insight into it, systematic studies of CeCoIn$_5$ heavy fermion superconductor have been performed by angle-resolved photoemission spectroscopy (ARPES) in a large angular range at temperature of $T=6$ K. The used photon energy of 122 eV corresponds to Ce $4d$-$4f$ resonance. Calculations carried out with relativistic multiple scattering Korringa-Kohn-Rostoker method and one-step model of photoemission yielded realistic simulation of the ARPES spectra indicating that Ce-In surface termination prevails. Surface states, which have been identified in the calculations, contribute significantly to the spectra. Effects of the hybridization strongly depend on wave vector. They include a dispersion of heavy electrons and bands gaining $f$-electron character when approaching Fermi energy. We have also observed a considerable variation of $f$-electron spectral weight at $E_F$, which is normally determined by both matrix element effects and wave vector dependent $c$-$f$ hybridization. Fermi surface scans covering a few Brillouin zones revealed large matrix element effects. A symmetrization of experimental Fermi surface, which reduces matrix element contribution, yielded a specific variation of $4f$-electron enhanced spectral intensity at $E_F$ around $\barΓ$ and $\bar{M}$ points. Tight-binding approximation calculations for Ce-In plane provided the same universal distribution of $4f$-electron density for a range of values of the parameters used in the model.

cond-mat.str-el↗

arXiv2020

Studies of Electronic Structure across a Quantum Phase Transition in CeRhSb$_{1-x}$Sn$_x$

We study an electronic structure of CeRhSb$_{1-x}$Sn$_x$ system, which displays quantum critical transition from a Kondo insulator to a non-Fermi liquid at $x=0.13$. We provide ultraviolet photoelectron spectra of valence band obtained at 12.5 K. Acoherent peak at the Fermi level is not present in the data, but a signal related to 4f$^1$$_{7/2}$ final state is detected. Spectral intensity at the Fermi edge has a general tendency to grow with Sn content. Theoretical calculations of band structure are realized with full-potential local-orbital minimum-basis code using scalar relativistic and full relativistic approach. The calculations reveal a depletion of density of states at the Fermi level for CeRhSb. This gap is shifted above the Fermi energy with increasing Sn content and thus a rise of density of states at the Fermi level is reflected in the calculations. It agrees with metallic properties of compounds with larger $x$. The calculations also yield another important effects of Sn substitution. Band structure is displaced in a direction corresponding to hole doping, although with deviations from a rigid band shift scenario. Lifshitz transitions modify a topology of the Fermi surface a few times and a number of bands crossing the Fermi level increases.

cond-mat.str-el↗

arXiv2019

Effect of electron doping in FeTe$_{1-y}$Se$_{y}$ realized by Co and Ni substitution

Angle-resolved photoemission spectroscopy (ARPES) reveals effects of electron doping, which is realized by Co and Ni substitution for Fe in FeTe$_{1-y}$Se$_{y}$ (y$\sim$0.35) superconductor. The data show consistent band shifts as well as expansion and shrinking of electron and hole Fermi surface, respectively. Doping of either element leads to a Lifshitz transition realized as a removal of one or two hole pockets. This explains qualitatively a complex behavior of Hall coefficient observed before [Bezusyy, et al., Phys. Rev. B 91, 100502 (2015)], including change of sign with doping, which takes place only below room temperature. Assuming that Ni substitution should deliver twice more electrons to the valence band than Co, it appears that such transfer is slightly more effective in the case of Co. Therefore, charge doping cannot account for much stronger effect of Ni on superconducting and transport properties [Bezusyy, et al., Phys. Rev. B 91, 100502 (2015)]. Although overall band shifts are roughly proportional to the amount of dopant, clear deviations from a rigid band shift scenario are found. The shape of electron pockets becomes elliptical only for Ni doping, effective mass of electron bands increases with doping, strong reduction of effective mass is observed for one of hole bands of the undoped system. The topology of hole and electron pockets for superconducting Fe$_{1.01}$Te$_{0.67}$Se$_{0.33}$ with T$_{c}$=13.6 K indicates a deviation from nesting. Co and Ni doping causes further departure from nesting, which accompanies the reduction of critical temperature.

cond-mat.supr-con↗