Searcharxiv⌕ Search

arXiv subjects

M. S. Golden

Publications and source records attributed to M. S. Golden.

At least 19 recordsLinked to original sources
arXiv2021

Spectroscopic signature of surface states and bunching of bulk subbands in topological insulator (Bi$_{0.4}$Sb$_{0.6}$)$_2$Te$_3$ thin films

High quality thin films of the topological insulator (Bi$_{0.4}$Sb$_{0.6}$)$_2$Te$_3$ have been deposited on SrTiO$_3$ (111) by molecular beam epitaxy. Their electronic structure was investigated by in situ angle-resolved photoemission spectroscopy and in situ scanning tunneling spectroscopy. The experimental results reveal striking similarities with relativistic ab-initio tight binding calculations. We find that ultrathin slabs of the three-dimensional topological insulator (Bi$_{0.4}$Sb$_{0.6}$)$_2$Te$_3$ display topological surface states, surface states with large weight on the outermost Te atomic layer, and dispersive bulk energy levels that are quantized. We observe that the bandwidth of the bulk levels is strongly reduced. These bunched bulk states as well as the surface states give rise to strong peaks in the local density of states.

cond-mat.mtrl-sci↗
arXiv2021

Momentum-dependent scaling exponents of nodal self-energies measured in strange metal cuprates and modelled using semi-holography

The anomalous strange metal phase found in high-$T_c$ cuprates does not follow the conventional condensed-matter principles enshrined in the Fermi liquid and presents a great challenge for theory. Highly precise experimental determination of the electronic self-energy can provide a test bed for theoretical models of strange metals, and angle-resolved photoemission can provide this as a function of frequency, momentum, temperature and doping. Here we show that constant energy cuts through the nodal spectral function in (Pb,Bi)$_{2}$Sr$_{2-x}$La$_x$CuO$_{6+δ}$ have a non-Lorentzian lineshape, meaning the nodal self-energy is $k$ dependent. We show that the experimental data are captured remarkably well by a power law with a $k$-dependent scaling exponent smoothly evolving with doping, a description that emerges naturally from AdS/CFT-based semi-holography. This puts a spotlight on holographic methods for the quantitative modelling of strongly interacting quantum materials like the cuprate strange metals.

cond-mat.str-el↗
arXiv2020

Balanced Detection in Femtosecond X-ray Absorption Spectroscopy to Reach the Ultimate Sensitivity Limit

X-ray absorption spectroscopy (XAS) is a powerful and well established technique with sensitivity to elemental and chemical composition. Despite these advantages, its implementation has not kept pace with the development of ultrafast pulsed x-ray sources where XAS can capture femtosecond chemical processes. X-ray Free Electron Lasers (XFELs) deliver femtosecond, narrow bandwidth ($\frac{ΔE}{E} < 0.5\%$) pulses containing $\sim 10^{10}$ photons. However, the energy contained in each pulse fluctuates thus complicating pulse by pulse efforts to quantify the number of photons. Improvements in counting the photons in each pulse have defined the state of the art for XAS sensitivity. Here we demonstrate a final step in these improvements through a balanced detection method that approaches the photon counting shot noise limit. In doing so, we obtain high quality absorption spectra from the insulator-metal transition in VO$_2$ and unlock a method to explore dilute systems, subtle processes and nonlinear phenomena with ultrafast x-rays. The method is especially beneficial for x-ray light sources where integration and averaging are not viable options to improve sensitivity.

physics.ins-det↗
arXiv2019

Multiband quasiparticle interference in the topological insulator Cu_(x)Bi_(2)Te_(3)

We present angle resolved photoemission experiments and scanning tunneling spectroscopy results on the doped topological insulator Cu0.2Bi2Te3. Quasi-particle interference (QPI) measurements, based on high resolution conductance maps of the local density of states show that there are three distinct energy windows for quasi-particle scattering. Using a model Hamiltonian for this system two new scattering channels are identified: the first between the surface states and the conduction band and the second between conduction band states. We also observe that the real space density modulation has a predominant three-fold symmetry, which rules out a simple, isotropic impurity potential. We obtain agreement between experiment and theory by considering a modified scattering potential that is consistent with having mostly Bi-Te anti-site defects as scatterers.

cond-mat.mes-hall↗
arXiv2018

Noisy defects in a doped Mott insulator

Detailed understanding of the role of single dopant atoms in host materials has been crucial for the continuing miniaturization in the semiconductor industry as local charging and trapping of electrons can completely change the behaviour of a device. Similarly, as dopants can turn a Mott insulator into a high temperature superconductor, their electronic behaviour at the atomic scale is of much interest. Due to limited time resolution of conventional scanning tunnelling microscopes, most atomic scale studies in these systems focussed on the time averaged effect of dopants on the electronic structure. Here, by using atomic scale shot-noise measurements in the doped Mott insulator Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8+x}$, we visualize sub-nanometer sized objects where remarkable dynamics leads to an enhancement of the tunnelling current noise by at least an order of magnitude. From the position, current and energy dependence we argue that these defects are oxygen dopant atoms that were unaccounted for in previous scanning probe studies, whose local environment leads to charge dynamics that strongly affect the tunnelling mechanism. The unconventional behaviour of these dopants opens up the possibility to dynamically control doping at the atomic scale, enabling the direct visualization of the effect of local charging on e.g. high T$_{\text{c}}$ superconductivity.

cond-mat.str-el↗
arXiv2018

Charge trapping and super-Poissonian noise centers in a cuprate high-temperature superconductor

The electronic properties of cuprate high temperature superconductors in their normal state are very two-dimensional: while transport in the ab plane is perfectly metallic, it is insulating along the c-axis, with ratios between the two exceeding 10^4. This anisotropy has been identified as one of the mysteries of the cuprates early on, and while widely different proposals exist for its microscopic origin, little is known empirically on the microscopic scale. Here, we elucidate the properties of the insulating layers with a newly developed scanning noise spectroscopy technique that can spatially map not only the current but also the current fluctuations in time. We discover atomic-scale noise centers that exhibit MHz current fluctuations 40 times the expectation from Poissonian noise, more than what has been observed in mesoscopic systems. Such behaviour can only happen in highly polarizable insulators and represents strong evidence for trapping of charge in the charge reservoir layers. Our measurements suggest a picture of metallic layers separated by polarizable insulators within a three-dimensional superconducting state.

cond-mat.str-el↗
arXiv2018

Electronic structure of the candidate 2D Dirac semimetal SrMnSb2: a combined experimental and theoretical study

SrMnSb$_2$ is suggested to be a magnetic topological semimetal. It contains square, 2D Sb planes with non-symmorphic crystal symmetries that could protect band crossings, offering the possibility of a quasi-2D, robust Dirac semi-metal in the form of a stable, bulk (3D) crystal. Here, we report a combined and comprehensive experimental and theoretical investigation of the electronic structure of SrMnSb$_2$, including the first ARPES data on this compound. SrMnSb$_2$ possesses a small Fermi surface originating from highly 2D, sharp and linearly dispersing bands (the Y-states) around the (0,$π$/a)-point in $k$-space. The ARPES Fermi surface agrees perfectly with that from bulk-sensitive Shubnikov de Haas data from the same crystals, proving the Y$-$states to be responsible for electrical conductivity in SrMnSb$_2$. DFT and tight binding (TB) methods are used to model the electronic states, and both show good agreement with the ARPES data. Despite the great promise of the latter, both theory approaches show the Y-states to be gapped above E$_F$, suggesting trivial topology. Subsequent analysis within both theory approaches shows the Berry phase to be zero, indicating the non-topological character of the transport in SrMnSb$_2$, a conclusion backed up by the analysis of the quantum oscillation data from our crystals.

cond-mat.str-el↗
arXiv2017

Trigger of the ubiquitous surface band bending in 3D topological insulators

The main scientific activity in the field of topological insulators (TIs) consists of determining their electronic structure by means of magneto-transport and electron spectroscopy with a view to devices based on topological transport. There is however a caveat in this approach. There are systematic experimental discrepancies on the electronic structure of the most pristine surfaces of TI single crystals as determined by Shubnikov de Haas (SdH) oscillations and by Angle Resolved PhotoElectron Spectroscopy (ARPES). We identify intense ultraviolet illumination -that is inherent to an ARPES experiment- as the source for these experimental differences. We explicitly show that illumination is the key parameter, or in other words the trigger, for energetic shifts of electronic bands near the surface of a TI crystal. This finding revisits the common belief that surface decoration is the principal cause of surface band bending and explains why band bending is not a prime issue in the illumination-free magneto-transport studies. Our study further clarifies the role of illumination on the electronic band structure of TIs by revealing its dual effect: downward band bending on very small timescales followed by band flattening at large timescales. Our results therefore allow us to present and predict the complete evolution of the band structure of TIs in a typical ARPES experiment. By virtue of our findings, we pinpoint two alternatives of how to approach flat band conditions by means of photon-based techniques and we suggest a microscopic mechanism that can explain the underlying phenomena.

cond-mat.mtrl-sci↗
arXiv2016

Andreev reflection in s-type superconductor proximized 3D topological insulator

We investigate transport and shot noise in lateral N-TI-S contacts, where N is a normal metal, TI is a Bi-based three dimensional topological insulator (3D TI), and S is an s-type superconductor. In normal state, the devices are in the elastic diffusive transport regime, as demonstrated by a nearly universal value of the shot noise Fano factor $F_{\rm N}\approx1/3$ in magnetic field and in reference normal contact. In the absence of magnetic field, we identify the Andreev reflection (AR) regime, which gives rise to the effective charge doubling in shot noise measurements. Surprisingly, the Fano factor $F_{\rm AR}\approx0.22\pm0.02$ is considerably reduced in the AR regime compared to $F_{\rm N}$, in contrast to previous AR experiments in normal metals and semiconductors. We suggest that this effect is related to a finite thermal conduction of the proximized, superconducting TI owing to a residual density of states at low energies.

cond-mat.mes-hall↗
arXiv2015

Quantum oscillations of the topological surface states in low carrier concentration crystals of Bi$_{2-x}$Sb$_{x}$Te$_{3-y}$Se$_{y}$

We report a high-field magnetotransport study on selected low-carrier crystals of the topological insulator Bi$_{2-x}$Sb${_x}$Te$_{3-y}$Se$_{y}$. Monochromatic Shubnikov - de Haas (SdH) oscillations are observed at 4.2~K and their two-dimensional nature is confirmed by tilting the magnetic field with respect to the sample surface. With help of Lifshitz-Kosevich theory, important transport parameters of the surface states are obtained, including the carrier density, cyclotron mass and mobility. For $(x,y)=(0.50,1.3)$ the Landau level plot is analyzed in terms of a model based on a topological surface state in the presence of a non-ideal linear dispersion relation and a Zeeman term with $g_s = 70$ or $-54$. Input parameters were taken from the electronic dispersion relation measured directly by angle resolved photoemission spectroscopy on crystals from the same batch. The Hall resistivity of the same crystal (thickness of 40~$μ$m) is analyzed in a two-band model, from which we conclude that the ratio of the surface conductance to the total conductance amounts to 32~\%.

cond-mat.mes-hall↗
arXiv2015

Electron correlation effects and scattering rates in Fe$_{1+y}$Te$_{1-x}$Se$_x$ superconductor

Using angle-resolved photoemission spectroscopy we have studied the low-energy electronic structure and the Fermi surface topology of Fe$_{1+y}$Te$_{1-x}$Se$_x$ superconductors. Similar to the known iron pnictides we observe hole pockets at the center and electron pockets at the corner of the Brillouin zone (BZ). However, on a finer level, the electronic structure around the $Γ$- and $Z$-points in $k$-space is substantially different from other iron pnictides, in that we observe two hole pockets at the $Γ$-point, and more interestingly only one hole pocket is seen at the $Z$-point, whereas in $1111$-, $111$-, and $122$-type compounds, three hole pockets could be readily found at the zone center. Another major difference noted in the Fe$_{1+y}$Te$_{1-x}$Se$_x$ superconductors is that the top of innermost hole-like band moves away from the Fermi level to higher binding energy on going from $Γ$ to $Z$, quite opposite to the iron pnictides. The polarization dependence of the observed features was used to aid the attribution of the orbital character of the observed bands. Photon energy dependent measurements suggest a weak $k_z$ dispersion for the outer hole pocket and a moderate $k_z$ dispersion for the inner hole pocket. By evaluating the momentum and energy dependent spectral widths, the single-particle self-energy was extracted and interestingly this shows a pronounced non-Fermi liquid behaviour for these compounds. The experimental observations are discussed in context of electronic band structure calculations and models for the self-energy such as the spin-fermion model and the marginal-Fermi liquid.

cond-mat.supr-con↗
arXiv2015

Angle-resolved and core-level photoemission study of interfacing the topological insulator Bi1.5Sb0.5Te1.7Se1.3 with Ag, Nb and Fe

Interfaces between a bulk-insulating topological insulator (TI) and metallic adatoms have been studied using high-resolution, angle-resolved and core-level photoemission. Fe, Nb and Ag were evaporated onto Bi1.5Sb0.5Te1.7Se1.3 (BSTS) surfaces both at room temperature and 38K. The coverage- and temperature-dependence of the adsorption and interfacial formation process have been investigated, highlighting the effects of the overlayer growth on the occupied electronic structure of the TI. For all coverages at room temperature and for those equivalent to less than 0.1 monolayer at low temperature all three metals lead to a downward shift of the TI's bands with respect to the Fermi level. At room temperature Ag appears to intercalate efficiently into the van der Waals gap of BSTS, accompanied by low-level substitution of the Te/Se atoms of the termination layer of the crystal. This Te/Se substitution with silver increases significantly for low temperature adsorption, and can even dominate the electrostatic environment of the Bi/Sb atoms in the BSTS near-surface region. On the other hand, Fe and Nb evaporants remain close to the termination layer of the crystal. On room temperature deposition, they initially substitute isoelectronically for Bi as a function of coverage, before substituting for Te/Se atoms. For low temperature deposition, Fe and Nb are too immobile for substitution processes and show a behaviour consistent with clustering on the surface. For both Ag and Fe/Nb, these differing adsorption pathways leads to the qualitatively similar and remarkable behavior for low temperature deposition that the chemical potential first moves upward (n-type dopant behavior) and then downward (p-type behavior) on increasing coverage.

cond-mat.str-el↗
arXiv2015

Conductance spectroscopy of a proximity induced superconducting topological insulator

We study the proximity effect between the fully-gapped region of a topological insulator in direct contact with an s-wave superconducting electrode (STI) and the surrounding topological insulator flake (TI) in Au/Bi$_{1.5}$Sb$_{0.5}$Te$_{1.7}$Se$_{1.3}$/Nb devices. The conductance spectra of the devices show the presence of a large induced gap in the STI as well as the induction of superconducting correlations in the normal part of the TI on the order of the Thouless energy. The shape of the conductance modulation around zero-energy varies between devices and can be explained by existing theory of s-wave-induced superconductivity in SNN' (S is a superconductor, N a superconducting proximized material and N' is a normal metal) devices. All the conductance spectra show a conductance dip at the induced gap of the STI.

cond-mat.supr-con↗
arXiv2015

In-situ spectroscopy of intrinsic Bi2Te3 topological insulator thin films and impact of extrinsic defects

Combined in-situ x-ray photoemission spectroscopy, scanning tunnelling spectroscopy and angle resolved photoemission spectroscopy of molecular beam epitaxy grown Bi2Te3 on lattice mismatched substrates reveal high quality stoichiometric thin films with topological surface states without a contribution from the bulk bands at the Fermi energy. The absence of bulk states at the Fermi energy is achieved without counter doping. We observe that the surface morphology and electronic band structure of Bi2Te3 are not affected by in-vacuo storage and exposure to oxygen, whereas major changes are observed when exposed to ambient conditions. These films help define a pathway towards intrinsic topological devices.

cond-mat.mtrl-sci↗
arXiv2015

Low carrier concentration crystals of the topological insulator Bi$_{2-x}$Sb$_{x}$Te$_{3-y}$Se$_{y}$: a magnetotransport study

In 3D topological insulators achieving a genuine bulk-insulating state is an important research topic. Recently, the material system (Bi,Sb)$_{2}$(Te,Se)$_{3}$ (BSTS) has been proposed as a topological insulator with high resistivity and a low carrier concentration (Ren \textit{et al.} \cite{Ren2011}). Here we present a study to further refine the bulk-insulating properties of BSTS. We have synthesized Bi$_{2-x}$Sb${_x}$Te$_{3-y}$Se$_{y}$ single crystals with compositions around $x = 0.5$ and $y = 1.3$. Resistance and Hall effect measurements show high resistivity and record low bulk carrier density for the composition Bi$_{1.46}$Sb$_{0.54}$Te$_{1.7}$Se$_{1.3}$. The analysis of the resistance measured for crystals with different thicknesses within a parallel resistor model shows that the surface contribution to the electrical transport amounts to 97% when the sample thickness is reduced to $1 μ$m. The magnetoconductance of exfoliated BSTS nanoflakes shows 2D weak antilocalization with $α\simeq -1$ as expected for transport dominated by topological surface states.

cond-mat.mes-hall↗
arXiv2014

Josephson supercurrent in a topological insulator without a bulk shunt

A Josephson supercurrent has been induced into the three-dimensional topological insulator Bi1.5Sb0.5Te1.7Se1.3. We show that the transport in Bi1.5Sb0.5Te1.7Se1.3 exfoliated flakes is dominated by surface states and that the bulk conductivity can be neglected at the temperatures where we study the proximity induced superconductivity. We prepared Josephson junctions with widths in the order of 40 nm and lengths in the order of 50 to 80 nm on several Bi1.5Sb0.5Te1.7Se1.3 flakes and measured down to 30 mK. The Fraunhofer patterns unequivocally reveal that the supercurrent is a Josephson supercurrent. The measured critical currents are reproducibly observed on different devices and upon multiple cooldowns, and the critical current dependence on temperature as well as magnetic field can be well explained by diffusive transport models and geometric effects.

cond-mat.supr-con↗
arXiv2013

Kondo hybridisation and the origin of metallic states at the (001) surface of SmB6

SmB6, a well-known Kondo insulator, has been proposed to be an ideal topological insulator with states of topological character located in a clean, bulk electronic gap, namely the Kondo hybridisation gap. Seeing as the Kondo gap arises from many body electronic correlations, this would place SmB6 at the head of a new material class: topological Kondo insulators. Here, for the first time, we show that the k-space characteristics of the Kondo hybridisation process is the key to unravelling the origin of the two types of metallic states observed directly by ARPES in the electronic band structure of SmB6(001). One group of these states is essentially of bulk origin, and cuts the Fermi level due to the position of the chemical potential 20 meV above the lowest lying 5d-4f hybridisation zone. The other metallic state is more enigmatic, being weak in intensity, but represents a good candidate for a topological surface state. However, before this claim can be substantiated by an unequivocal measurement of its massless dispersion relation, our data raises the bar in terms of the ARPES resolution required, as we show there to be a strong renormalisation of the hybridisation gaps by a factor 2-3 compared to theory, following from the knowledge of the true position of the chemical potential and a careful comparison with the predictions from recent LDA+Gutzwiler calculations. All in all, these key pieces of evidence act as triangulation markers, providing a detailed description of the electronic landscape in SmB6, pointing the way for future, ultrahigh resolution ARPES experiments to achieve a direct measurement of the Dirac cones in the first topological Kondo insulator.

cond-mat.mtrl-sci↗