arXiv subjects

M. Samsel-Czekała

Publications and source records attributed to M. Samsel-Czekała.

16 recordsLinked to original sources

arXiv2025

Electronic structure of UGe$_2$ at ambient pressure: comparison with X-ray photoemission spectra

Based on experimental crystallographic data, electronic structure of UGe$_2$ have been calculated and compared with our results of X-ray photoelectron spectroscopy (XPS) measurements. We employed two different advanced full potential (FP) methods: FP-local-orbital (FPLO) and FP-linear augmented plane waves (Wien2k) codes for non-magnetic and ferromagnetic states. Starting from the local spin-density approximation (LSDA) or generalised gradient approximation (GGA), we verified either the orbital polarisation (OP) correction or the GGA+U approach for the U 5f-electrons, changing Coulomb-repulsion energies U in the range 0-4 eV. Satisfying agreement was achieved between experimental and our calculated magnetic moments using ab-initio LSDA+OP and non-ab-initio GGA+U approaches, the latter for realistic U values of 2-3 eV. We proved by the LSDA+OP approach an existence of the Fermi surface nesting vector along the a axis, possibly responsible for the triplet superconducting pairing. The calculated data reveal predominantly an itinerant U 5f-electron character of bands near the Fermi level, EF, with only small contributions from the U 6d and Ge 4p states. The experimental XPS spectrum of valence bands (VB) also contains the sharp main 5f-electron peak at EF, a wide hump (around -2 eV), and broad small peaks at higher energies. In the calculated XPS spectrum, the width of the main 5f-electron peak varies between 0.8 and 1.4 eV, depending on a method used in computations, but the hump remains unresolved. A newly observed asymmetric 1-eV satellite in the experimental 4f-core XPS spectrum together with known 3-eV and 7-eV satellites suggest dual behaviour of U-5f-electrons in UGe$_2$, the feature is inferred also from the VB studies.

cond-mat.mtrl-sci↗

arXiv2015

Magnetism and Superconductivity of S-substituted FeTe

The influence of a partial substitution with sulphur into Te sites on the crystal, electronic and magnetic structures of FeTe is investigated by DFT calculations. The results reveal a phase transition from the antiferromagnetic double-stripe order for pure FeTe to the single-stripe order for S-substituted samples, which coincides with the previously observed appearance of the superconducting state. The magnetic transition is caused by the variations of the average chalcogen position in the unit cell. The analyzed normal-state properties of Fe(Te,S) and Fe(Se;S) compounds allow a detection of the well resolved nesting-driven magnetic fluctuations only for superconducting samples, consistent with their antiferromagnetic ground state. Thus, the role of an S-substitution is a suppression of the double-stripe antiferromagnetic order to give rise to the single-stripe correlations, which are associated with an occurrence of superconductivity in Fe(Te,S) solid solutions.

cond-mat.supr-con↗

arXiv2014

Electronic structure of ruthenium-doped iron chalcogenides

The structural and electronic properties of hypothetical Ru$_x$Fe$_{1-x}$Se and Ru$_x$Fe$_{1-x}$Te systems have been investigated from first principles within the density functional theory (DFT). Reasonable values of lattice parameters and chalcogen atomic positions in the tetragonal unit cell of iron chalcogenides have been obtained with the use of norm-conserving pseudopotentials. The well known discrepancies between experimental data and DFT-calculated results for structural parameters of iron chalcogenides are related to the semicore atomic states which were frozen in the used here approach. Such an approach yields valid results of the electronic structures of the investigated compounds. The Ru-based chalcogenides exhibit the same topology of the Fermi surface (FS) as that of FeSe, differing only in subtle FS nesting features. Our calculations predict that the ground states of RuSe and RuTe are nonmagnetic, whereas those of the solid solutions Ru$_x$Fe$_{1-x}$Se and Ru$_x$Fe$_{1-x}$Te become the single- and double-stripe antiferromagnetic, respectively. However, the calculated stabilization energy values are comparable for each system. The phase transitions between these magnetic arrangements may be induced by slight changes of the chalcogen atom positions and the lattice parameters $a$ in the unit cell of iron selenides and tellurides. Since the superconductivity in iron chalcogenides is believed to be mediated by the spin fluctuations in single-stripe magnetic phase, the Ru$_x$Fe$_{1-x}$Se and Ru$_x$Fe$_{1-x}$Te systems are good candidates for new superconducting iron-based materials.

cond-mat.supr-con↗

arXiv2014

Electronic structure of the heavy-fermion superconductor Ce2Ni3Ge5 and its reference Ce2Ni3Si5 compound by ab initio calculations

Band structures of the pressure-induced, heavy-fermion superconductor Ce2Ni3Ge5 and its non-superconducting, mixed-valence isostructural (Ibam) counterpart Ce2Ni3Si5 have been calculated employing the full-potential local-orbital code. Both the local density approximation (LDA) and LDA+U approaches were applied. These investigations were focused particularly on the topology of the Fermi surfaces (FSs) of the compounds. The results show that the FSs are quite similar in these systems and exist in four bands, containing three-dimensional holelike and electronlike sheets. However, the specific FS nesting properties has been revealed only in Ce2Ni3Ge5. They support a previously postulated presence of antiferromagnetic spin fluctuations (SF) in the heavy-fermion superconducting state of this germanide under pressure. Such SF can be responsible for the pressure-induced unconventional superconductivity in this system.

cond-mat.supr-con↗

arXiv2014

Electronic structure of superconducting Lu2Ni3Si5 and its reference compound Y2Ni3Si5 by ab initio calculations

Electronic structures of orthorhombic ternary nickel silicides: superconducting Lu2Ni3Si5 and its non-superconducting counterpart, Y2Ni3Si5, have been calculated employing the fully-relativistic and full-potential local-orbital method within the density functional theory. Our investigations were focused particularly on the band structures and Fermi surfaces (FSs), being very similar for both ternaries. It appears that their FSs exist in four bands and contain electronlike and holelike three-dimensional sheets and small pockets, which suggests a presence of two- or even multi-band superconductivity (SC) in Lu2Ni3Si5. The main difference between both systems is that only in Lu2Ni3Si5 small electron FS pockets occur around the Gamma point. It allows for arising BCS-like SC in this compound, as was deduced from previous heat-capacity measurements, while no sign of SC has been detected (at least down to 2 K) in Y2Ni3Si5. In the latter system, a possible formation of a ferromagnetic ground state, which usually tends to destroy SC, has been excluded by our calculations.

cond-mat.supr-con↗

arXiv2014

Electronic structure and Fermi surface of iron-based superconductors R2Fe3Si5 (R = Lu;Y;Sc) from first principles

Electronic structures of three superconducting rare-earth iron silicides (Lu;Y;Sc)2Fe3Si5 and non-superconducting Lu2Ru3Si5, adopting a tetragonal crystal structure (P4/mnc), have been calculated employing the full-potential local-orbital method within the density functional theory. The investigations were focused particularly on the band structures and Fermi surfaces, existing in four bands and containing rather three-dimensional electronlike and holelike sheets. They support an idea of unconventional multi-band superconductivity in these ternaries, proposed earlier by other authors for Lu2Fe3Si5, based on heat-capacity, resistivity, electromagnetic and muon spin rotation measurements. Finally, a discussion on differences in the electronic structures between the investigated here and other common families of iron-based superconductors is carried out.

cond-mat.supr-con↗

arXiv2014

Electronic structure of the 344-type superconductors La3(Ni;Pd)4(Si;Ge)4 by ab initio calculations

Electronic structures of superconducting ternaries: La3Ni4Si4, La3Ni4Ge4, La3Pd4Si4, La3Pd4Ge4, and their non-superconducting counterpart, La3Rh4Ge4, have been calculated employing the full-potential local-orbital method within the density functional theory. Our investigations were focused particularly on densities of states (DOSs) at the Fermi level with respect to previous experimental heat capacity data, and Fermi surfaces (FSs) being very similar for all considered here compounds. In each of these systems, the FS originating from several bands contains both holelike and electronlike sheets possessing different dimensionality, in particular quasi-two-dimensional cylinders with nesting properties. A comparative analysis of the DOSs and FSs in these 344-type systems as well as in nickel (oxy)pnictide and borocarbide superconductors indicates rather similar phonon mechanism of their superconductivity.

cond-mat.supr-con↗

arXiv2014

The electronic structure of rare-earth iron silicide R2Fe3Si5 superconductors

The electronic structures of R2Fe3Si5 (where R = Lu, Tm, Er, Tb, Yb) intermetallics have been calculated from first principles in local-spin density (LSDA) and LSDA + U approaches. The majority of rare-earth iron silicides, except for the heavy-fermion Yb-based compound, exhibit almost equal values of density of states at the Fermi level (EF) as well as very similar Fermi surface topology. The electronic structure around EF in the 235-type Fe-based compounds is completely dominated by the Fe 3d states. Thus the different superconducting properties of some members of the R2Fe3Si5 family are rather related to a presence of local magnetic moments of R-atoms than to electronic-structure features at EF.

cond-mat.supr-con↗

arXiv2014

Electronic structure of non-centrosymmetric superconductor LaPdSi3 and its reference compound LaPdGe3

Electronic structures of a superconductor without inversion symmetry, LaPdSi3, and its non-superconducting counterpart, LaPdGe3, have been calculated employing the full-potential local-orbital method within the density functional theory. The investigations were focused on analyses of densities of states at the Fermi level in comparison with previous experimental heat capacity data and an influence of the antisymmetric spin-orbit coupling on the band structures and Fermi surfaces (FSs) being very similar for both considered here compounds. Their FSs sheets originate from four bands and have a holelike character, but exhibiting pronounced nesting features only for superconducting LaPdSi3. It may explain a relatively strong electron-phonon coupling in the latter system and its lack in non-superconducting LaPdGe3.

cond-mat.supr-con↗

arXiv2014

The electronic structure of CeNiGe3 and YNiGe3 superconductors by ab initio calculations

Band structures of pressure-induced CeNiGe3 and exotic BCS-like YNiGe3 superconductors have been calculated employing the full-potential local-orbital code. Both the local density approximation (LDA) and LDA+U treatment of the exchange-correlation energy were used. The investigations were focused on differences between electronic properties of both compounds. Our results indicate that the Ce-based system exhibits higher density of states at the Fermi level, dominated by the Ce 4f states, in contrast to its non f-electron counterpart. The Fermi surface (FS) of each compound originates from three bands and consists of both holelike and electronlike sheets. The specific FS nesting properties of only CeNiGe3 enable an occurrence of spin fluctuations of a helicoidal antiferromagnetic character that may lead to unconventional pairing mechanism in this superconductor. In turn, the topology of the FS in YNiGe3 reveals a possibility of multi-band superconductivity, which can explain the observed anomalous jump at Tc in its specific heat.

cond-mat.supr-con↗

arXiv2014

Strain effects on electronic structure and superconductivity in the iron telluride

The influence of tensile strain in the ab-plane on crystal and electronic structure of FeTe has been studied ab initio. In superconducting FeSe the Fermi surface nesting with a vector q~(0.5,0.5)(2π/a) is believed to be crucial for rising superconductivity mediated by spin-fluctuations. The results presented here indicate that tensile-strained FeTe also exhibits such conditions. Furthermore, the Fermi surface changes, related to the increase of the lattice parameter a of this telluride, are opposite to analogous effects reported for FeSe. Since a recently reported transition from the double-stripe to the single-stripe magnetic order in FeTe under tensile strain in the ab-plane is associated with an occurence of superconductivity in corresponding thin films, these findings allow for drawing a consistent picture of superconductivity in FeSe(1-x)Te(x) systems, in general.

cond-mat.supr-con↗

arXiv2013

Magnetic phase transitions and superconductivity in strained FeTe

The influence of hydrostatic pressure and ab-plane strain on the magnetic structure of FeTe is investigated from first principles. The results of calculations reveal a phase transition from antiferromagnetic double-stripe ordering at ambient pressure to ferromagnetic ordering at 2 GPa, or under compressive strain reducing the lattice parameter a by about 3%. In turn, a tensile strain of less than 2% induces the phase transition to antiferromagnetic single-stripe ordering. It corresponds to the superconducting FeTe thin films, thereby confirming that the superconducting state is positively linked to single-stripe antiferromagnetic fluctuations. Both types of transition indicate that the position of Te atoms in the crystal is crucial for the magnetic and superconducting properties of iron chalcogenides.

cond-mat.supr-con↗

arXiv2013

Strain effects on the electronic structure of the FeSe0.5Te0.5 superconductor

The electronic structure of the strained FeSe0.5Te0.5 superconductor has been investigated from first principles. Our calculation results indicate that the influence of hydrostatic, biaxial or uniaxial compressive stress on the density of states at the Fermi level is insignificant. The overall shape of the Fermi-surface (FS) nesting function for FeSe0.5Te0.5 at ambient pressure resembles that of its parent compound, FeSe, but under the ab-plane compressive strain. In these two systems, changes of their FSs under various stress conditions are qualitatively almost the same. However, in FeSe0.5Te0.5 the intensity of the perfect Q=(0.5,0.5)*(2π/a) nesting vector is more diminished. These findings are in good agreement with former experimental data and support the idea of spin-fluctuation mediated superconductivity in iron chalcogenides.

cond-mat.supr-con↗

arXiv2013

Strain effects on electronic structure of the iron selenide superconductor

The influence of various strains on crystal and electronic structures of superconducting FeSe has been studied ab initio. We consider changes in the Fermi surface nesting with a vector Q=(0.5,0.5)*(2π/a) as crucial for rising superconductivity (SC) mediated by spin-fluctuations (SF). Our results indicate that the c-axis strained FeSe exhibits the most imperfect nesting, which enhances SF and, hence, also SC. In turn, the ab-plane compressive strain slightly weakens this} nesting while the tensile strain destroys it completely. These findings are consistent with reported earlier experimental dependencies of superconducting transition temperatures on strain in FeSe thin films.

cond-mat.supr-con↗

arXiv2013

The substitution effects on electronic structure of iron selenide superconductors

The influence of a partial substitution with S, Te, Co, Ni and Cu atoms on the electronic structure of the FeSe superconductor has been investigated within the density functional theory. The results of the supercell calculations reveal distinct changes of electronic structures of the substituted FeSe systems, which can be responsible for their superconducting properties. The replacement of Se atoms by Te or S ones yields imperfect nesting between the holelike and electronlike Fermi surface (FS) sheets, which enhances magnetic fluctuations responsible for superconducting pairing, thus leading to higher values of the superconducting critical temperatures. Meanwhile, the substitutions with transition-metal atoms for iron sites make more substantial changes of the FSs topology, since the holelike cylinders shrink at the cost of an enlargement of the electronlike ones. Thus, the superconducting pairing, driven by the nesting between these sheets, weakens and superconductivity disappears for a small percentage of dopants. The results support the idea of spin-fluctuation mediated superconductivity in iron chalcogenides.

cond-mat.supr-con↗

arXiv2012

The Pressure Effects on Electronic Structure of Iron Chalcogenide Superconductors FeSe$_{1-x}$Te$_x$

We study the electronic structure of iron-based superconductors FeSe$_{1-x}$Te$_x$ within the density functional theory. We pay particular attention to the pressure effects on the Fermi surface (FS) topology, which seem to be correlated with a critical superconducting temperature TC of iron chalcogenides and pnictides. A reduction of the FS nesting between hole and electron cylinders with increasing pressure is observed, which can lead to higher values of TC . The tellurium substitution into selenium sites yields FS changes similar to the pressure effect.

cond-mat.supr-con↗