arXiv subjects

M. Sbragaglia

Publications and source records attributed to M. Sbragaglia.

48 records · Page 3Linked to original sources

arXiv2007

Capillary filling using Lattice Boltzmann Equations: the case of multi-phase flows

We present a systematic study of capillary filling for multi-phase flows by using mesoscopic lattice Boltzmann models describing a diffusive interface moving at a given contact angle with respect to the walls. We compare the numerical results at changing the density ratio between liquid and gas phases and the ratio between the typical size of the capillary and the interface width. It is shown that numerical results yield quantitative agreement with the Washburn law when both ratios are large, i.e. as the hydrodynamic limit of a infinitely thin interface is approached. We also show that in the initial stage of the filling process, transient behaviour induced by inertial effects and ``vena contracta'' mechanisms, may induce significant departure from the Washburn law. Both effects are under control in our lattice Boltzmann equation and in good agreement with the phenomenology of capillary filling.

nlin.CG↗

arXiv2006

Generalized Lattice Boltzmann Method with multi-range pseudo-potential

The physical behaviour of a class of mesoscopic models for multiphase flows is analyzed in details near interfaces. In particular, an extended pseudo-potential method is developed, which permits to tune the equation of state and surface tension independently of each other. The spurious velocity contributions of this extended model are shown to vanish in the limit of high grid refinement and/or high order isotropy. Higher order schemes to implement self-consistent forcings are rigorously computed for 2d and 3d models. The extended scenario developed in this work clarifies the theoretical foundations of the Shan-Chen methodology for the lattice Boltzmann method and enhances its applicability and flexibility to the simulation of multiphase flows to density ratios up to O(100).

nlin.CG↗

arXiv2006

Effective velocity boundary condition at a mixed slip surface

This paper studies the nature of the effective velocity boundary conditions for liquid flow over a plane boundary on which small free-slip islands are randomly distributed. It is found that, to lowest order in the area fraction $β$ covered by free-slip regions with characteristic size $a$, a macroscopic Navier-type slip condition emerges with a slip length of the order of $aβ$. The study is motivated by recent experiments which suggest that gas nano-bubbles may form on solid walls and may be responsible for the appearance of a partial slip boundary conditions for liquid flow. The results are also relevant for ultra-hydrophobic surfaces exploiting the so-called ``lotus effect''.

physics.flu-dyn↗

arXiv2006

A mesoscopic approach for multi-phase flows in nano-corrugated channels

An approach based on a lattice version of the Boltzmann kinetic equation for describing multi-phase flows in nano- and micro-corrugated devices is proposed. We specialize it to describe the wetting/dewetting transition of fluids in presence of nanoscopic grooves etched on the boundaries. This approach permits to retain the essential supra-molecular details of fluid-solid interactions without surrendering -actually boosting- the computational efficiency of continuum methods. The mesoscopic method is first validated quantitatively against Molecular Dynamics (MD) results of Cottin-Bizonne et al. [Nature Mater. 2, 237 (2003)] and then applied to more complex situations which are hardly accessible to MD simulations. The resulting analysis confirms that surface roughness and capillary effects may conspire to promote a counter-intuitive but significant reduction of the flow drag with substantial enhancement in the mass flow rates and slip-lengths in the micrometric range for highly hydrophobic surfaces.

nlin.CG↗

arXiv2006

Boundary induced non linearities at small Reynolds Numbers

We investigate the influence of boundary slip velocity in Newtonian fluids at finite Reynolds numbers. Numerical simulations with Lattice Boltzmann method (LBM) and Finite Differences method (FDM) are performed to quantify the effect of heterogeneous boundary conditions on the integral and local properties of the flow. Non linear effects are induced by the non homogeneity of the boundary condition and change the symmetry properties of the flow inducing an overall mean flow reduction. To explain the observed drag modification, reciprocal relations for stationary ensembles are used, predicting a reduction of the mean flow rate from the creeping flow to be proportional to the fourth power of the friction Reynolds number. Both numerical schemes are then validated within the theoretical predictions and reveal a pronounced numerical efficiency of the LBM with respect to FDM.

cond-mat.other↗

arXiv2006

Mesoscopic modeling of a two-phase flow in the presence of boundaries: the Contact Angle

We present a mesoscopic model, based on the Boltzmann Equation, for the interaction between a solid wall and a non-ideal fluid. We present an analytic derivation of the contact angle in terms of the surface tension between the liquid-gas, the liquid-solid and the gas-solid phases. We study the dependency of the contact angle on the two free parameters of the model, which determine the interaction between the fluid and the boundaries, i.e. the equivalent of the wall density and of the wall-fluid potential in Molecular Dynamics studies. We compare the analytical results obtained in the hydrodynamical limit for the density profile and for the surface tension expression with the numerical simulations. We compare also our two-phase approach with some exact results for a pure hydrodynamical incompressible fluid based on Navier-Stokes equations with boundary conditions made up of alternating slip and no-slip strips. Finally, we show how to overcome some theoretical limitations connected with a discretized Boltzmann scheme and we discuss the equivalence between the surface tension defined in terms of the mechanical equilibrium and in terms of the Maxwell construction.

nlin.CD↗

arXiv2005

Mesoscopic two-phase model for describing apparent slip in micro-channel flows

The phenomenon of apparent slip in micro-channel flows is analyzed by means of a two-phase mesoscopic lattice Boltzmann model including non-ideal fluid-fluid and fluid-wall interactins. The weakly-inhomogeneous limit of this model is solved analytically. The present mesoscopic approach permits to access much larger scales than molecular dynamics, and comparable with those attained by continuum methods. However, at variance with the continuum approach, the existence of a gas layer near the wall does not need to be postulated a priori, but emerges naturally from the underlying non-ideal mesoscopic dynamics. It is therefore argued that a mesoscopic Lattice Boltzmann approach with non-ideal fluid-fluid and fluid-wall interactions might achieve an optimal compromise between physical realism and computational efficiency for the study of channel micro-flows.

physics.flu-dyn↗

arXiv2005

Mesoscopic modeling of heterogeneous boundary conditions for microchannel flows

We present a mesoscopic model of the fluid-wall interactions for flows in microchannel geometries. We define a suitable implementation of the boundary conditions for a discrete version of the Boltzmann equations describing a wall-bounded single phase fluid. We distinguish different slippage properties on the surface by introducing a slip function, defining the local degree of slip for mesoscopic molecules at the boundaries. The slip function plays the role of a renormalizing factor which incorporates, with some degree of arbitrariness, the microscopic effects on the mesoscopic description. We discuss the mesoscopic slip properties in terms of slip length, slip velocity, pressure drop reduction (drag reduction), and mass flow rate in microchannels as a function of the degree of slippage and of its spatial distribution and localization, the latter parameter mimicking the degree of roughness of the ultra-hydrophobic material in real experiments. We also discuss the increment of the slip length in the transition regime, i.e. at O(1) Knudsen numbers. Finally, we compare our results with Molecular Dynamics investigations of the dependency of the slip length on the mean channel pressure and local slip properties (Cottin-Bizonne et al. 2004) and with the experimental dependency of the pressure drop reduction on the percentage of hydrophobic material deposited on the surface -- Ou et al. (2004).

nlin.CD↗

arXiv2004

Inhomogeneous Anisotropic Passive Scalars

We investigate the behaviour of the two-point correlation function in the context of passive scalars for non homogeneous, non isotropic forcing ensembles. Exact analytical computations can be carried out in the framework of the Kraichnan model for each anisotropic sector. It is shown how the homogeneous solution is recovered at separations smaller than an intrinsic typical lengthscale induced by inhomogeneities, and how the different Fourier modes in the centre-of-mass variable recombine themselves to give a ``beating'' (superposition of power laws) described by Bessel functions. The pure power-law behaviour is restored even if the inhomogeneous excitation takes place at very small scales.

nlin.CD↗

arXiv2004

Dynamical scaling and intermittency in shell models of turbulence

We introduce a model for the turbulent energy cascade aimed at studying the effect of dynamical scaling on intermittency. In particular, we show that by slowing down the energy transfer mechanism for fixed energy flux, intermittency decreases and eventually disappears. This result supports the conjecture that intermittency can be observed only if energy is flowing towards faster and faster scales of motion.

nlin.CD↗

arXiv2004

A lattice Boltzmann study of non-hydrodynamic effects in shell models of turbulence

A lattice Boltzmann scheme simulating the dynamics of shell models of turbulence is developed. The influence of high order kinetic modes (ghosts) on the dissipative properties of turbulence dynamics is studied. It is analytically found that when ghost fields relax on the same time scale as the hydrodynamic ones, their major effect is a net enhancement of the fluid viscosity. The bare fluid viscosity is recovered by letting ghost fields evolve on a much longer time scale. Analytical results are borne out by high-resolution numerical simulations. These simulations indicate that the hydrodynamic manifold is very robust towards large fluctuations of non hydrodynamic fields.

nlin.CD↗

arXiv2004

Anomalous scaling and universality in hydrodynamic systems with power-law forcing

The problem of the interplay between normal and anomalous scaling in turbulent systems stirred by a random forcing with a power law spectrum is addressed. We consider both linear and nonlinear systems. As for the linear case, we study passive scalars advected by a 2d velocity field in the inverse cascade regime. For the nonlinear case, we review a recent investigation of 3d Navier-Stokes turbulence, and we present new quantitative results for shell models of turbulence. We show that to get firm statements is necessary to reach considerably high resolutions due to the presence of unavoidable subleading terms affecting all correlation functions. All findings support universality of anomalous scaling for the small scale fluctuations.

nlin.CD↗