SearcharxivSearch

arXiv subjects

M. Schmid

Publications and source records attributed to M. Schmid.

11 recordsLinked to original sources

Time evolution of magnetic activity cycles in young suns: The curious case of kappa Ceti

A detailed investigation of the magnetic properties of young Sun-like stars can provide valuable information on our Sun's magnetic past and its impact on the early Earth. We determine the properties of the moderately rotating young Sun-like star kappa Ceti's magnetic and activity cycles using 50 years of chromospheric activity data and six epochs of spectropolarimetric observations. The chromospheric activity was determined by measuring the flux in the Ca II H and K lines. A generalised Lomb-Scargle periodogram and a wavelet decomposition were used on the chromospheric activity data to establish the associated periodicities. The vector magnetic field of the star was reconstructed using the technique of Zeeman Doppler imaging on the spectropolarimetric observations. Our period analysis algorithms detect a 3.1 year chromospheric cycle in addition to the star's well-known ~6 year cycle period. Although the two cycle periods have an approximate 1:2 ratio, they exhibit an unusual temporal evolution. Additionally, the spectropolarimetric data analysis shows polarity reversals of the star's large-scale magnetic field, suggesting a ~10 year magnetic or Hale cycle. The unusual evolution of the star's chromospheric cycles and their lack of a direct correlation with the magnetic cycle establishes kappa Ceti as a curious young Sun. Such complex evolution of magnetic activity could be synonymous with moderately active young Suns, which is an evolutionary path that our own Sun could have taken.

astro-ph.SR

A Unique Crystal Structure of Ca$_2$RuO$_4$ in the Current Stabilized Semi-Metallic State

The electric-current stabilized semi-metallic state in the quasi-two-dimensional Mott insulator Ca$_2$RuO$_4$ exhibits an exceptionally strong diamagnetism. Through a comprehensive study using neutron and X-ray diffraction, we show that this non-equilibrium phase assumes a crystal structure distinct from those of equilibrium metallic phases realized in the ruthenates by chemical doping, high pressure and epitaxial strain, which in turn leads to a distinct electronic band structure. Dynamical mean field theory calculations based on the crystallographically refined atomic coordinates and realistic Coulomb repulsion parameters indicate a semi-metallic state with partially gapped Fermi surface. Our neutron diffraction data show that the non-equilibrium behavior is homogeneous, with antiferromagnetic long-range order completely suppressed. These results provide a new basis for theoretical work on the origin of the unusual non-equilibrium diamagnetism in Ca$_2$RuO$_4$.

cond-mat.str-el

Subsurface Cation Vacancy Stabilization of the Magnetite (001) Surface

Iron oxides play an increasingly prominent role in heterogeneous catalysis, hydrogen production, spintronics and drug delivery. The surface or material interface can be performance limiting in these applications, so it is vital to determine accurate atomic-scale structures for iron oxides and understand why they form. Using a combination of quantitative low-energy electron diffraction, scanning tunneling microscopy, and density functional theory calculations, we show that an ordered array of subsurface iron vacancies and interstitials underlies the well-known (rt2xrt2)R45° reconstruction of Fe3O4(001). This hitherto unobserved stabilization mechanism occurs because the iron oxides prefer to redistribute cations in the lattice in response to oxidizing or reducing environments. Many other metal oxides also achieve stoichiometric variation in this way, so such surface structures are likely commonplace.

cond-mat.mtrl-sci

Dependence of transverse magneto-thermoelectric effects on inhomogeneous magnetic fields

Transverse magneto-thermoelectric effects are studied in permalloy thin films grown on MgO substrates. We find that small parasitic magnetic fields below 1 Oe can produce artifacts of the order of 1 % of the amplitude of the anisotropic magneto-thermopower which is also detected in the experiments. The measured artifacts reveal a new source of uncertainties for the detection of the transverse spin Seebeck effect. Taking these results into account we conclude that the contribution of the transverse spin Seebeck effect to the detected voltages is below the noise level of 20 nV.

cond-mat.mes-hall

Transport and Capture Properties of Auger-Generated High-Energy Carriers in (AlInGa)N Quantum Well Structures

Recent photoluminescence experiments presented by M. Binder et al. [Appl. Phys. Lett. 103, 071108 (2013)] demonstrated the visualization of high-energy carriers generated by Auger recombination in (AlInGa)N multi quantum wells. Two fundamental limitations were deduced which reduce the detection efficiency of Auger processes contributing to the reduction in internal quantum efficiency: the capture probability of these hot electrons and holes in a detection well and the asymmetry in type of Auger recombination. We investigate the transport and capture properties of these high-energy carriers regarding polarization fields, the capture distance to the generating well and the capture volume. All three factors are shown to have a noticeable impact on the detection of these hot particles. Furthermore, the investigations support the finding that electron-electron-hole exceeds electron-hole-hole Auger recombination if the densities of both carrier types are similar. Overall, the results add to the evidence that Auger processes play an important role in the reduction of efficiency in (AlInGa)N based LEDs.

cond-mat.mtrl-sci

Calculation of Energy Band Diagram of a Photoelectrochemical Water Splitting Cell

A physical model is presented for a semiconductor electrode of a photoelectrochemical (PEC) cell, accounting for the potential drop in the Helmholtz layer. Hence both band edge pinning and unpinning are naturally included in our description. The model is based on the continuity equations for charge carriers and direct charge transfer from the energy bands to the electrolyte. A quantitative calculation of the position of the energy bands and the variation of the quasi-Fermi levels in the semiconductor with respect to the water reduction and oxidation potentials is presented. Calculated current-voltage curves are compared with established analytical models and measurement. Our model calculations are suitable to enhance understanding and improve properties of semiconductors for photoelectrochemical water splitting.

physics.comp-ph

Transverse spin Seebeck vs. Anomalous and Planar Nernst Effects in Permalloy Thin Films

Transverse magneto-thermoelectric effects are studied in permalloy thin films grown on MgO and GaAs substrates and compared to those grown on suspended SiN membranes. The transverse voltage along platinum strips patterned on top of the permalloy films is measured vs. the external magnetic field as a function of angle and temperature gradient. After the identification of the contribution of the planar and anomalous Nernst effects, we find an upper limit for the transverse spin Seebeck effect, which is several orders of magnitude smaller than previously reported.

cond-mat.mes-hall

Antiferromagnetic coupling across silicon regulated by tunneling currents

We report on the enhancement of antiferromagnetic coupling in epitaxial Fe/Si/Fe structures by voltage-driven spin-polarized tunneling currents. Using the ballistic electron magnetic microscopy we established that the hot-electron collector current reflects magnetization alignment and the magnetocurrent exceeds 200% at room temperature. The saturation magnetic field for collector current corresponding to parallel alignment of magnetizations rises up with the tunneling current, thus demonstrating stabilization of the antiparallel alignment and increasing antiferromagnetic coupling. We connect the enhancement of antiferromagnetic coupling with local dynamic spin torques mediated by tunneling electrons

cond-mat.mes-hall

Chemical ordering and composition fluctuations at the (001) surface of the Fe-Ni Invar alloy

We report on a study of (001) oriented fcc Fe-Ni alloy surfaces which combines first-principles calculations and low-temperature STM experiments. Density functional theory calculations show that Fe-Ni alloy surfaces are buckled with the Fe atoms slightly shifted outwards and the Ni atoms inwards. This is consistent with the observation that the atoms in the surface layer can be chemically distinguished in the STM image: brighter spots (corrugation maxima with increased apparent height) indicate iron atoms, darker ones nickel atoms. This chemical contrast reveals a c2x2 chemical order (50% Fe) with frequent Fe-rich defects on Invar alloy surface. The calculations also indicate that subsurface composition fluctuations may additionally modulate the apparent height of the surface atoms. The STM images show that this effect is pronounced compared to the surfaces of other disordered alloys, which suggests that some chemical order and corresponding concentration fluctuations exist also in the subsurface layers of Invar alloy. In addition, detailed electronic structure calculations allow us to identify the nature of a distinct peak below the Fermi level observed in the tunneling spectra. This peak corresponds to a surface resonance band which is particularly pronounced in iron-rich surface regions and provides a second type of chemical contrast with less spatial resolution but one that is essentially independent of the subsurface composition.

cond-mat.mtrl-sci

Searching atomic spin contrast on nickel oxide (001) by force microscopy

The (001) surface of NiO, an antiferromagnet at room temperature, was investigated under ultra-high vacuum conditions with frequency modulation atomic force microscopy (FM-AFM). The antiferromagnetic coupling between ions leads to a spin superstructure on (001) surfaces. Exchange interaction between the probe of a force microscope and the NiO (001) surface should allow to image spin superstructures in real space. The surface was imaged with three different probing tips: nonmagnetic W tips, ferromagnetic Co tips and antiferromagnetic NiO tips - and atomic resolution was achieved with all three of them in various distance regimes and in several channels. Evidence for spin contrast was obtained in experiments that utilize NiO tips and oscillation amplitudes in the Å-regime, where optimal signal-to-noise ratio is expected. The spin contrast is weaker than expected and only visible in Fourier space images.

cond-mat.str-el

Device for in-situ cleaving of hard crystals

Cleaving crystals in a vacuum chamber is a simple method for obtaining atomically flat and clean surfaces for materials that have a preferential cleaving plane. Most in-situ cleavers use parallel cutting edges that are applied from two sides on the sample. We found in ambient experiments that diagonal cutting pliers, where the cleavage force is introduced in a single point instead of a line work very well also for hard materials. Here, we incorporate the diagonal cutting plier principle in a design compatible with ultra-high vacuum requirements. We show optical microscopy (mm scale) and atomic force microscopy (atomic scale) images of NiO(001) surfaces cleaved with this device.

cond-mat.mtrl-sci