arXiv subjects

M. Scodeggio

Publications and source records attributed to M. Scodeggio.

At least 37 records · Page 2Linked to original sources

arXiv2022

Shaping physical properties of galaxy subtypes in the VIPERS survey: environment matters

Aims. This study aims to explore the relationship between the physical properties of different galaxy subclasses and their environment based on the analysis of 31 631 VIMOS Public Extragalactic Redshift Survey (VIPERS) galaxies observed at 0.5 < z < 0.9. Methods. We use the results of an unsupervised clustering algorithm to distinguish 11 subclasses of VIPERS galaxies based on the multi-dimensional feature space defined by rest-frame UV to NIR colours presented in Siudek et al (2018a). We investigate the relationship between the properties of these subclasses of galaxies and their local environment, defined as the galaxy density contrast derived from the 5th nearest neighbour technique. Results. We confirm that the galaxy population-density relation is already in place at z ~ 0.9, with the blue galaxy fraction decreasing with density, compensated by an increase of the red fraction. On average red galaxies in the high-density environment are larger by 28% than the ones in low-density environments. In particular, we find one group of galaxies, subclass C3, whose increase of size with time can be explained mainly as the result of mergers; for other red subclasses, mergers would not seem to play a major role (subclass C2) or play a negligible role (subclass C1). The properties of the green galaxies (subclasses C4-6) depend on whether their stellar mass is above or below a transition mass. Low-mass green galaxies appear to have grown through secular processes, while in high-mass green galaxies mass assembly appears to be dominated by mergers. When it comes to blue galaxies, the trend of decreasing fraction with denser environments seen for the group as a whole (subclasses C7-11) is found to be driven mostly by one group of galaxies, subclass C10. These are compact low-mass galaxies with high sSFRs, that are preferentially found in low-density environments.

astro-ph.GA↗

arXiv2022

MPGDs for tracking and Muon detection at future high energy physics colliders

In the next years, the energy and intensity frontiers of the experimental Particle Physics will be pushed forward with the upgrade of existing accelerators (LHC at CERN) and the envisaged construction of new machines at energy scales up to hundreds TeV or with unprecedented intensity (FCC-hh, FCC-ee, ILC, Muon Collider). Large size, cost-effective, high-efficiency detection systems in high background environments are required in order to accomplish the physics program. MPGDs offer a diversity of technologies that allow them to meet the required performance challenges at future facilities thanks to the specific advantages that each technology provides. MPGDs allow stable operation, with environmentally friendly gas mixtures, at very high background particle flux with high detection efficiency and excellent spatial resolution. These features make MPGD one of the primary choices as precise muon tracking and trigger system in general-purpose detectors at future HEP colliders. In addition, the low material budget and the flexibility of the base material make MPGDs suitable for the development of very light, full cylindrical fine tracking inner trackers at lepton colliders. On-going R&Ds aim at pushing the detector performance at the limits of each technology. We are working in continuing to consolidate the construction and stable operation of large-size detectors, able to cope with large particle fluxes. In this white paper, we describe some of the most prominent MPGD technologies, their performance measurements, the challenges faced in the most recent applications, and the areas of improvement towards efficient tracking and Muon detection at future high energy physics colliders.

physics.ins-det↗

arXiv2022

Euclid: Constraining ensemble photometric redshift distributions with stacked spectroscopy

The ESA Euclid mission will produce photometric galaxy samples over 15000 square degrees of the sky that will be rich for clustering and weak lensing statistics. The accuracy of the cosmological constraints derived from these measurements will depend on the knowledge of the underlying redshift distributions based on photometric redshift calibrations. A new approach is proposed to use the stacked spectra from Euclid slitless spectroscopy to augment broad-band photometric information to constrain the redshift distribution with spectral energy distribution fitting. The high spectral resolution available in the stacked spectra complements the photometry and helps to break the colour-redshift degeneracy and constrain the redshift distribution of galaxy samples. We modelled the stacked spectra as a linear mixture of spectral templates. The mixture may be inverted to infer the underlying redshift distribution using constrained regression algorithms. We demonstrate the method on simulated Vera C. Rubin Observatory and Euclid mock survey data sets based on the Euclid Flagship mock galaxy catalogue. We assess the accuracy of the reconstruction by considering the inference of the baryon acoustic scale from angular two-point correlation function measurements. We selected mock photometric galaxy samples at redshift z>1 using the self-organising map algorithm. Considering the idealised case without dust attenuation, we find that the redshift distributions of these samples can be recovered with 0.5% accuracy on the baryon acoustic scale. The estimates are not significantly degraded by the spectroscopic measurement noise due to the large sample size. However, the error degrades to 2% when the dust attenuation model is left free. We find that the colour degeneracies introduced by attenuation limit the accuracy considering the wavelength coverage of Euclid near-infrared spectroscopy.

astro-ph.CO↗

arXiv2021

The Type II AGN-host galaxy connection: insights from the VVDS and VIPERS surveys

We present a study of optically-selected Type II AGN at 0.5 < z < 0.9 from the VIPERS and VVDS surveys, to investigate the connection between AGN activity and physical properties of their host galaxies. The host stellar mass is estimated through spectral energy distribution fitting with the CIGALE code, and star formation rates are derived from the [OII]$λ$3727 $Å$ line luminosity. We find that 49% of the AGN host galaxies are on or above the main sequence (MS), 40% lie in the sub-MS locus, and 11% in the quiescent locus. Using the [OIII]$λ$5007 $Å$ line luminosity as a proxy of the AGN power, we find that at fixed AGN power Type II AGN host galaxies show a bimodal behaviour: systems with host galaxy stellar mass <10$^{10}$ M$_{\odot}$, reside along the MS or in the starbursts locus (high-SF Type II AGN), while systems residing in massive host-galaxies (>10$^{10}$ M$_{\odot}$) show a lower level of star formation (low-SF Type II AGN). At all stellar masses, the offset from the MS is positively correlated with the AGN power. We interpret this correlation as evidence of co-evolution between the AGN and the host, possibly due to the availability of cold gas. In the most powerful AGN with host galaxies below the MS we find a hint, though weak, of asymmetry in the [OIII] line profile, likely due to outflowing gas, consistent with a scenario in which AGN feedback removes the available gas and halts the star formation in the most massive hosts.

astro-ph.GA↗

arXiv2021

CLASH-VLT: Abell~S1063. Cluster assembly history and spectroscopic catalogue

Using the CLASH-VLT survey, we assembled an unprecedented sample of 1234 spectroscopically confirmed members in Abell~S1063, finding a dynamically complex structure at z_cl=0.3457 with a velocity dispersion σ_v=1380 -32 +26 km s^-1. We investigate cluster environmental and dynamical effects by analysing the projected phase-space diagram and the orbits as a function of galaxy spectral properties. We classify cluster galaxies according to the presence and strength of the [OII] emission line, the strength of the H$δ$ absorption line, and colours. We investigate the relationship between the spectral classes of galaxies and their position in the projected phase-space diagram. We analyse separately red and blue galaxy orbits. By correlating the observed positions and velocities with the projected phase-space constructed from simulations, we constrain the accretion redshift of galaxies with different spectral types. Passive galaxies are mainly located in the virialised region, while emission-line galaxies are outside r_200, and are accreted later into the cluster. Emission-lines and post-starbursts show an asymmetric distribution in projected phase-space within r_200, with the first being prominent at Delta_v/sigma <~-1.5$, and the second at Delta_v/ sigma >~ 1.5, suggesting that backsplash galaxies lie at large positive velocities. We find that low-mass passive galaxies are accreted in the cluster before the high-mass ones. This suggests that we observe as passives only the low-mass galaxies accreted early in the cluster as blue galaxies, that had the time to quench their star formation. We also find that red galaxies move on more radial orbits than blue galaxies. This can be explained if infalling galaxies can remain blue moving on tangential orbits.

astro-ph.GA↗

arXiv2021

Spectroscopic observations of PHz G237.01+42.50: A galaxy protocluster at z=2.16 in the Cosmos field

The Planck satellite has identified more than 2000 protocluster candidates with extreme star formation rates (SFRs). Here, we present the spectroscopic identification of a Planck-selected protocluster located in the Cosmos field, PHz G237.01+42.50 (G237). G237 contains a galaxy overdensity of 31 spectroscopically identified galaxies at z~2.16 (significant at 5.4 sigma) in a 10'x11' region. The overdensity contains two substructures or protoclusters at ~2.16 and 2.195 with estimated halo masses at z=0 of ~(5-6)x10^14 Msun. The overdensity total SFR, ~4000 Msun/yr, is higher than predicted by simulations but much smaller than the SFR derived from the Planck data. The analysis of the Herschel data, in combination with the available ancillary data, shows that such a difference is due to an effect of source alignment along the line of sight that produces a 5 sigma overdensity of red Herschel sources in the field. We analyze the members' UV spectra and UV-far-infrared spectral energy distributions to derive their SFR, stellar mass, and metallicity. Galaxy members include blue star-forming galaxies and AGN with SFRs and stellar masses consistent with the main sequence. AGN, identified through optical spectroscopy or X-ray data, represent a significant fraction (20+/-10%) of all members of the protocluster at z=2.16, and they are powerful enough to produce radiative feedback. The core of this protocluster, besides being denser, includes members that are, on average, more massive and star-forming and contains a larger fraction of AGN and Herschel-detected galaxies than the full sample, suggesting an environmental effect on galaxy growth. A comparison between G237 and other protoclusters in the literature at similar redshifts reveals some common traits and differences that reflect both observational biases and a diversity in intrinsic properties that is not yet fully understood.

astro-ph.GA↗

arXiv2021

uRANIA-V: an innovative solution for neutron detection in homeland security

Detection of neutrons is becoming of the utmost importance, especially in the studies of radioactive waste and in homeland security applications. The crisis of 3He availability has required the development of innovative techniques. One solution is to develop light gas detectors for neutron counting to be used as portals for ports and airports. The neutron is converted on the Boron-coated cathode, releasing a charged particle, whose passage can be identified by the gas detector. While several technologies have been deployed in the past, the project μRANIA-V ( μRwell Advanced Neutron Identification Apparatus) aims to detect thermal neutrons by means of the μRwell technology, an innovative gas detector. The goal is to produce tiles to operate as portals in homeland security or for radioactive waste management. The technological transfer towards the industry has started, thus the production can be cost-effective also owing to a construction process relatively easier compared to similar apparatus. By reading directly the signals from the amplification stage, the neutrons can be counted with simplified electronics further reducing the total cost. In this paper, the project will be described, with details on the μRwell technology and on the neutron counting, on the test beam performed, and on the future plans.

physics.ins-det↗

arXiv2021

The CGEM-IT readout chain

An innovative Cylindrical Gas Electron Multiplier (CGEM) detector is under construction for the upgrade of the inner tracker of the BESIII experiment. A novel system has been worked out for the readout of the CGEM detector, including a new ASIC, dubbed TIGER -Torino Integrated GEM Electronics for Readout, designed for the amplification and digitization of the CGEM output signals. The data output by TIGER are collected and processed by a first FPGA-based module, GEM Read Out Card, in charge of configuration and control of the front-end ASICs. A second FPGA-based module, named GEM Data Concentrator, builds the trigger selected event packets containing the data and stores them via the main BESIII data acquisition system. The design of the electronics chain, including the power and signal distribution, will be presented together with its performance.

physics.ins-det↗

arXiv2021

Euclid preparation: I. The Euclid Wide Survey

Euclid is an ESA mission designed to constrain the properties of dark energy and gravity via weak gravitational lensing and galaxy clustering. It will carry out a wide area imaging and spectroscopy survey (EWS) in visible and near-infrared, covering roughly 15,000 square degrees of extragalactic sky on six years. The wide-field telescope and instruments are optimized for pristine PSF and reduced straylight, producing very crisp images. This paper presents the building of the Euclid reference survey: the sequence of pointings of EWS, Deep fields, Auxiliary fields for calibrations, and spacecraft movements followed by Euclid as it operates in a step-and-stare mode from its orbit around the Lagrange point L2. Each EWS pointing has four dithered frames; we simulate the dither pattern at pixel level to analyse the effective coverage. We use up-to-date models for the sky background to define the Euclid region-of-interest (RoI). The building of the reference survey is highly constrained from calibration cadences, spacecraft constraints and background levels; synergies with ground-based coverage are also considered. Via purposely-built software optimized to prioritize best sky areas, produce a compact coverage, and ensure thermal stability, we generate a schedule for the Auxiliary and Deep fields observations and schedule the RoI with EWS transit observations. The resulting reference survey RSD_2021A fulfills all constraints and is a good proxy for the final solution. Its wide survey covers 14,500 square degrees. The limiting AB magnitudes ($5σ$ point-like source) achieved in its footprint are estimated to be 26.2 (visible) and 24.5 (near-infrared); for spectroscopy, the H$_α$ line flux limit is $2\times 10^{-16}$ erg cm$^{-2}$ s$^{-1}$ at 1600 nm; and for diffuse emission the surface brightness limits are 29.8 (visible) and 28.4 (near-infrared) mag arcsec$^{-2}$.

astro-ph.CO↗

arXiv2021

A proposal for relative in-flight flux self-calibrations for spectro-photometric surveys

We present a method for the in-flight relative flux self-calibration of a spectro-photometer instrument, general enough to be applied to any upcoming galaxy survey on satellite. The instrument response function, that accounts for a smooth continuous variation due to telescope optics, on top of a discontinuous effect due to the segmentation of the detector, is inferred with a $χ^2$ statistics. The method provides unbiased inference of the sources count rates and of the reconstructed relative response function, in the limit of high count rates. We simulate a simplified sequence of observations following a spatial random pattern and realistic distributions of sources and count rates, with the purpose of quantifying the relative importance of the number of sources and exposures for correctly reconstructing the instrument response. We present a validation of the method, with the definition of figures of merit to quantify the expected performance, in plausible scenarios.

astro-ph.IM↗

arXiv2021

The VANDELS ESO public spectroscopic survey: final Data Release of 2087 spectra and spectroscopic measurements

VANDELS is an ESO Public Spectroscopic Survey designed to build a sample of high signal to noise, medium resolution spectra of galaxies at redshift between 1 and 6.5. Here we present the final Public Data Release of the VANDELS Survey, comprising 2087 redshift measurements. We give a detailed description of sample selection, observations and data reduction procedures. The final catalogue reaches a target selection completeness of 40% at iAB = 25. The high Signal to Noise ratio of the spectra (above 7 in 80% of the spectra) and the dispersion of 2.5Å allowed us to measure redshifts with high precision, the redshift measurement success rate reaching almost 100%. Together with the redshift catalogue and the reduced spectra, we also provide optical mid-IR photometry and physical parameters derived through SED fitting. The observed galaxy sample comprises both passive and star forming galaxies covering a stellar mass range 8.3< Log(M*/Msolar)<11.7. All catalogues and spectra are accessible through the survey database (http://vandels.inaf.it) where all information can be queried interactively, and via the ESO Archive (https://www.eso.org/qi/).

astro-ph.GA↗

arXiv2020

Modelling the quenching of star formation activity from the evolution of the colour-magnitude relation in VIPERS

We study the evolution of the colour-magnitude relation for galaxies in the VIMOS Public Extragalactic Redshift Survey (VIPERS) by introducing the concept of the bright edge, and use this to derive constraints on the quenching of star formation activity in galaxies over the redshift range $0.5 < z < 1.1$. The bright-edge of the colour-magnitude diagram evolves with little dependence on galaxy colour, and therefore on the amount of star formation taking place in bright galaxies. We modelled this evolution with delayed exponential star formation histories (SFHs), to better understand the time-scale of the turn-off in star formation activity. We show that using SFHs without quenching, the transition from the blue cloud to the red sequence is too slow. This indicates that a scenario purely driven by the consumption of the gas inside each galaxy does not reproduce the observed evolution of the colour-magnitude bright edge. Among the quenching scenarios explored, the one that best matches the observations assumes that galaxies stop their star formation at a randomly selected time with a uniform distribution up to $2.5$ Gyr. We argue that quenching is required over a wide range of stellar masses. Qualitatively similar evolution of the bright edge is found in the predictions of a semi-analytical galaxy formation model, but quantitatively there are marked differences with the observations. This illustrates the utility of the bright edge as a test of galaxy formation models. The evolution changes and no longer matches the observed trend if feedback from heating by active galactic nuclei is turned off.

astro-ph.GA↗

arXiv2020

u-RANIA: a neutron detector based on μ-RWELL technology

In the framework of the ATTRACT-uRANIA project, funded by the European Community, we are developing an innovative neutron imaging detector based on micro-Resistive WELL ($μ$ -RWELL) technology. The $μ$ -RWELL, based on the resistive detector concept, ensuring an efficient spark quenching mechanism, is a highly reliable device. It is composed by two main elements: a readout-PCB and a cathode. The amplification stage for this device is embedded in the readout board through a resistive layer realized by means of an industrial process with DLC (Diamond-Like Carbon). A thin layer of B$_4$C on the copper surface of the cathode allows the thermal neutrons detection through the release of $^7$Li and $α$ particles in the active volume. This technology has been developed to be an efficient and convenient alternative to the $^3$He shortage. The goal of the project is to prove the feasibility of such a novel neutron detector by developing and testing small planar prototypes with readout boards suitably segmented with strip or pad read out, equipped with existing electronics or readout in current mode. Preliminary results from the test with different prototypes, showing a good agreement with the simulation, will be presented together with construction details of the prototypes and the future steps of the project.

physics.ins-det↗

arXiv2020

A Supernova Candidate at z=0.092 in XMM-Newton Archival Data

During a search for X-ray transients in the XMM-Newton archive within the EXTraS project, we discovered a new X-ray source that is detected only during a ~5 min interval of a ~21 h-long observation performed on 2011 June 21 (EXMM 023135.0-603743, probability of a random Poissonian fluctuation: ~$1.4\times10^{-27}$). With dedicated follow-up observations, we found that its position is consistent with a star-forming galaxy (SFR = 1-2 $M_\odot$ yr$^{-1}$) at redshift $z=0.092\pm0.003$ ($d=435\pm15$ Mpc). At this redshift, the energy released during the transient event was $2.8\times10^{46}$ erg in the 0.3-10 keV energy band (in the source rest frame). The luminosity of the transient, together with its spectral and timing properties, make EXMM 023135.0-603743 a gripping analog to the X-ray transient associated to SN 2008D, which was discovered during a Swift/XRT observation of the nearby ($d=27$ Mpc) supernova-rich galaxy NGC 2770. We interpret the XMM-Newton event as a supernova shock break-out or an early cocoon, and show that our serendipitous discovery is compatible with the rate of core-collapse supernovae derived from optical observations and much higher than that of tidal disruption events.

astro-ph.HE↗

arXiv2020

Time performance of a triple-GEM detector at high rate

Gaseous detectors are used in high energy physics as trackers or, more generally, as devices for the measurement of the particle position. For this reason, they must provide high spatial resolution and they have to be able to operate in regions of intense radiation, i.e. around the interaction point of collider machines. Among these, Micro Pattern Gaseous Detectors (MPGD) are the latest frontier and allow to overcome many limitations of the pre-existing detectors, such as the radiation tolerance and the rate capability. The gas Electron Multiplier (GEM) is a MPGD that exploits an intense electric field in a reduced amplification region in order to prevent discharges. Several amplification stages, like in a triple-GEM, allow to increase the detector gain and to reduce the discharge probability. Reconstruction techniques such as charge centroid (CC) and micro-Time Projection Chamber ($\upmu$TPC) are used to perform the position measurement. From literature triple-GEMs show a stable behaviour up to $10^8\,$Hz/cm$^2$. A testbeam with four planar triple-GEMs has been performed at the Mainz Microtron (MAMI) facility and their performance was evaluated in different beam conditions. In this article a focus on the time performance for the $\upmu$TPC clusterization is given and a new measurement of the triple-GEM limits at high rate will be presented.

physics.ins-det↗

arXiv2019

The VIMOS Public Extragalactic Redshift Survey (VIPERS) -- Environment-size relation of massive passive galaxies at 0.5 < z < 0.8

We use the statistics of the VIPERS survey to investigate the relation between the surface mean stellar mass density Sigma=Mstar/(2*pi*Re^2) of massive passive galaxies (MPGs, Mstar>10^11 Msun) and their environment in the redshift range 0.5 2*10^11 Msun, we find an excess of MPGs with low Sigma and a deficit of high-Sigma MPGs in the densest regions wrt other environments. We interpret this result as due to the migration of some high-Sigma MPGs (<1% of the total population of MPGs) into low-Sigma MPGs, probably through mergers or cannibalism of small satellites. In summary, our results imply that the accretion of satellite galaxies has a marginal role in the mass-assembly history of most MPGs. We have previously found that the number density of VIPERS massive star-forming galaxies (MSFGs) declines rapidily from z=0.8 to z=0.5, which mirrors the rapid increase in the number density of MPGs. This indicates that the MSFGs at z>0.8 migrate to the MPG population. Here, we investigate the Sigma-delta relation of MSFGs at z>0.8 and find that it is consistent within 1 sigma with that of low-Sigma MPGs at z<0.8. Thus, the results of this and our previous paper show that MSFGs at z>0.8 are consistent in terms of number and environment with being the progenitors of low-Sigma MPGs at z<0.8.

astro-ph.GA↗

arXiv2019

Triple GEM performance in magnetic field

Performance of triple GEM prototypes in strong magnetic field has been evaluated bymeans of a muon beam at the H4 line of the SPS test area at CERN. Data have been reconstructedand analyzed offline with two reconstruction methods: the charge centroid and the micro-Time-Projection-Chamber exploiting the charge and the time measurement respectively. A combinationof the two reconstruction methods is capable to guarantee a spatial resolution better than 150μmin magnetic field up to a 1 T.

physics.ins-det↗

arXiv2018

The VIMOS Public Extragalactic Redshift Survey (VIPERS). Unsupervised classification with photometric redshifts: a method to accurately classify large galaxy samples without spectroscopic information

Techniques to classify galaxies solely based on photometry will be necessary for future large cosmology missions, such as Euclid or LSST. However, the precision of classification is always lower in photometric surveys and can be systematically biased with respect to classifications based upon spectroscopic data. We verified how precisely the detailed classification scheme introduced by Siudek et al. (2018, hereafter: S1) for galaxies at z~0.7 could be reproduced if only photometric data are available. We applied the Fisher Expectation-Maximization (FEM) unsupervised clustering algorithm to 54,293 VIPERS galaxies working in a parameter space of reliable photometric redshifts and 12 corresponding rest-frame magnitudes. The FEM algorithm distinguishes four main groups: (1) red, (2) green, (3) blue, and (4) outliers. Each group is further divided into 3, 3, 4, and 2 subclasses, respectively. The accuracy of reproducing galaxy classes using spectroscopic data is high: 92%, 84%, 96% for red, green, and blue classes, respectively, except for dusty star-forming galaxies. The presented verification of the photometric classification demonstrates that large photometric samples can be used to distinguish different galaxy classes at z > 0.5 with an accuracy provided so far only by spectroscopic data except for particular galaxy classes.

astro-ph.GA↗