arXiv subjects

M. Shoji

Publications and source records attributed to M. Shoji.

13 recordsLinked to original sources

arXiv2025

Aerogel RICH Counter at the Belle II Detector

We report on the design, operation, and performance of a novel proximity-focusing Ring Imaging Cherenkov (RICH) detector equipped with a multilayer focusing aerogel radiator, developed for the forward region of the Belle II spectrometer at the SuperKEKB $e^+e^-$ collider. The system achieves effective separation of charged pions, kaons, and protons across the full kinematic range of the experiment, from 0.5 GeV/c to 4 GeV/c. To date, the detector has successfully operated in data-taking, contributing to the collection and analysis of nearly 600/fb of Belle II $e^+e^-$ collision data.

hep-ex↗

arXiv2025

Development of an imager with high time resolution optical photon counter

Astrophysical transient phenomena on sub-millisecond timescales, such as fast radio bursts and giant radio pulses from the Crab pulsar, have been primarily observed in radio wavebands. To investigate their origins, a photon detector with high sensitivity and high time resolution is required also in other wavelengths. Recently, we developed the Imager of MPPC-based Optical photoN counter from Yamagata (IMONY), an observation system utilizing a Geiger-mode avalanche photodiode (GAPD) as a sensor. The sensor consists of 64 pixels, each comprising a GAPD and a quenching resistor, with pixel sizes of 75, 100, 150, and 200\,$\mu$m. Each pixel signal is read out independently, enabling single-photon detection. After successfully observing the Crab pulsar using two Japanese telescopes, we upgraded the readout boards to achieve a more compact and stable system. The new system incorporates an analog application-specific integrated circuit (ASIC) developed at KEK for multi-purpose fast readout for silicon photomultipliers. This ASIC features a fast transimpedance amplifier and a comparator, independently processing 16 channels. A Global Navigation Satellite System receiver and a Field Programmable Gate Array (FPGA) provide timestamps for each detected photon with a resolution of 100 ns. The FPGA transmits the acquired data to a PC via Ethernet. This paper presents the details of the new system and the results of its initial evaluation.

astro-ph.IM↗

arXiv2021

SPring-8 LEPS2 beamline: A facility to produce a multi-GeV photon beam via laser Compton scattering

We have constructed a new laser-Compton-scattering facility, called the LEPS2 beamline, at the 8-GeV electron storage ring, SPring-8. This facility provides a linearly polarized photon beam in a tagged energy range of 1.3--2.4 GeV. Thanks to a small divergence of the low-emittance storage-ring electrons, the tagged photon beam has a size (sigma) suppressed to about 4 mm even after it travels about 130 m to the experimental building that is independent of the storage ring building and contains large detector systems. This beamline is designed to achieve a photon beam intensity higher than that of the first laser-Compton-scattering beamline at SPring-8 by adopting the simultaneous injection of up to four high-power laser beams and increasing a transmittance for the long photon-beam path up to about 77%. The new beamline is under operation for hadron photoproduction experiments.

physics.acc-ph↗

arXiv2020

Intermodular Configuration Scrubbing of On-detector FPGAs for the ARICH at Belle II

On-detector digital electronics in High-Energy Physics experiments is increasingly being implemented by means of SRAM-based FPGA, due to their capabilities of reconfiguration, real-time processing and multi-gigabit data transfer. Radiation-induced single event upsets in the configuration hinder the correct operation, since they may alter the programmed routing paths and logic functions. In most trigger and data acquisition systems, data from several front-end modules are concentrated into a single board, which then transmits data to back-end electronics for acquisition and triggering. Since the front-end modules are identical, they host identical FPGAs, which are programmed with the same bitstream. In this work, we present a novel scrubber capable of correcting radiation-induced soft-errors in the configuration of SRAM-based FPGAs by majority voting across different modules. We show an application of this system to the read-out electronics of the Aerogel Ring Imaging CHerenkov (ARICH) subdetector of the Belle2 experiment at SuperKEKB of the KEK laboratory (Tsukuba, Japan). We discuss the architecture of the system and its implementation in a Virtex-5 LX50T FPGA, in the concentrator board, for correcting the configuration of up to six Spartan-6 LX45 FPGAs, on pertaining front-end modules. We discuss results from fault-injection and neutron irradiation tests at the TRIGA reactor of the Jozef Stefan Institute (Ljubljana, Slovenia) and we compare the performance of our solution to the Xilinx Soft Error Mitigation controller.

physics.ins-det↗

arXiv2020

LTARS: Analog Readout Front-end ASIC for Versatile TPC-applications

We designed a versatile analog front-end chip, called LTARS, for TPC-applications, primarily targeted at dual-phase liquid Ar-TPCs for neutrino experiments and negative-ion $μ$-TPCs for directional dark matter searches. Low-noise performance and wide dynamic range are two requirements for reading out the signals induced on the TPC readout channels. One of the development objectives is to establish the analog processing circuits under low temperature operation, which are designed on function block basis as reusable IPs (Intellectual Properties). The newly developed ASIC was implemented in the Silterra 180~nm CMOS technology and has 16 readout channels. We carried out the performance test at room temperature and the results showed an equivalent noise charge of 2695$\pm$71~e$^-$ (rms) with a detector capacitance of 300~pF. The dynamic range was measured to be 20--100~fC in the low-gain mode and 200--1600~fC in the high-gain mode within 10\% integral nonlinearity at room temperature. We also tested the performance at the liquid-Ar temperature and found a deterioration of the noise level with a longer shaper time. Based on these results, we also discuss a unique simulation methodology for future cold-electronics development. This method can be applicable to design the electronics used at low temperature.

physics.ins-det↗

arXiv2020

Performance evaluation of the aerogel RICH counter for the Belle II spectrometer using early beam collision data

The Aerogel Ring Imaging Cherenkov (ARICH) counter serves as a particle identification device in the forward end-cap region of the Belle II spectrometer. It is capable of identifying pions and kaons with momenta up to $4 \, {\rm GeV}/c$ by detecting Cherenkov photons emitted in the silica aerogel radiator. After the detector alignment and calibration of the probability density function, we evaluate the performance of the ARICH counter using early beam collision data. Event samples of $D^{\ast +} \to D^0 π^+ (D^0 \to K^-π^+)$ were used to determine the $π(K)$ efficiency and the $K(π)$ misidentification probability. We found that the ARICH counter is capable of separating kaons from pions with an identification efficiency of $93.5 \pm 0.6 \, \%$ at a pion misidentification probability of $10.9 \pm 0.9 \, \%$. This paper describes the identification method of the counter and the evaluation of the performance during its early operation.

physics.ins-det↗

arXiv2020

Performance evaluation of a silicon strip detector for positrons/electrons from a pulsed a muon beam

A high-intensity pulsed muon beam is becoming available at the at the Japan Proton Accelerator Research Complex (J-PARC). Many experiments to study fundamental physics using this high-intensity muon beam are proposed. An experiment to measure the muon magnetic moment anomaly ($g-2$) and the muon electric dipole moment (EDM) is one of these experiments and it requires a tracking detector for positrons from muon decay. Fine segmentation is required in a detector to tolerate the high rate of positrons. The time resolution is required to be much better than the muon anomalous spin precession period while a buffer depth of a front-end electronics needs to be much longer than the accelerated muon lifetime. Requirements of this detector also meet requirements of a measurement of the muonium hyperfine structure interval at the J-PARC and another experiment to measure the proton charge radius at Tohoku University. We have developed a single-sided silicon strip sensor with a 190 $μ$m pitch, a front-end electronics with a sampling rate of 200 MHz and a buffer memory depth of 8192, and a data acquisition system based on DAQ-Middleware for the J-PARC muon $g-2$/EDM experiment. We have fabricated detector modules consisting of this sensor and the front-end electronics. Performance of fabricated detector modules was evaluated at a laboratory and a beam test using the positron beam at Tohoku University. The detector is confirmed to satisfy all requirements of the experiments except for the time walk, which will be solved by the next version of a front-end electronics.

physics.ins-det↗

arXiv2019

A New Approach for Measuring the Muon Anomalous Magnetic Moment and Electric Dipole Moment

This paper introduces a new approach to measure the muon magnetic moment anomaly $a_μ = (g-2)/2$, and the muon electric dipole moment (EDM) $d_μ$ at the J-PARC muon facility. The goal of our experiment is to measure $a_μ$ and $d_μ$ using an independent method with a factor of 10 lower muon momentum, and a factor of 20 smaller diameter storage-ring solenoid compared with previous and ongoing muon $g-2$ experiments with unprecedented quality of the storage magnetic field. Additional significant differences from the present experimental method include a factor of 1,000 smaller transverse emittance of the muon beam (reaccelerated thermal muon beam), its efficient vertical injection into the solenoid, and tracking each decay positron from muon decay to obtain its momentum vector. The precision goal for $a_μ$ is statistical uncertainty of 450 part per billion (ppb), similar to the present experimental uncertainty, and a systematic uncertainty less than 70 ppb. The goal for EDM is a sensitivity of $1.5\times 10^{-21}~e\cdot\mbox{cm}$.

physics.ins-det↗

arXiv2018

Role of Helium-Hydrogen ratio on energetic interchange mode behaviour and its effect on ion temperature and micro-turbulence in LHD

In the Large helical device, a change of energetic particle mode is observed as He concentration is varied in ion-ITB type experiments, having constant electron density and input heating power but with a clear increase of central ion temperature in He rich discharges. This activity consists of bursty, but damped energetic interchange modes (EICs, X Du et al., Phys. Rev. Lett. 114 p.155003 (2015)), whose occurrence rate is dramatically lower in the He-rich discharges. Mechanisms are discussed for the changes in drive and damping of the modes with He concentration. These EIC bursts consist of marked changes in the radial electric field, which is derived from the phase velocity of turbulence measured with the 2D phase contrast imaging (PCI) system. Similar bursts are detected in edge fast ion diagnostics. Ion thermal transport by gyro-Bohm scaling is recognised as a contribution to the change in ion temperature, though fast ion losses by these EIC modes may also contribute to the ion temperature dependence on He concentration, most particularly controlling the height of an "edge-pedestal" in the $T_{i}$ profile. The steady-state level of fast ions is shown to be larger in Helium rich discharges on the basis of a compact neutral particle analyser (CNPA), and the fast-ion component of the diamagnetic stored energy. These events also have an influence on turbulence and transport. The large velocity shear induced produced during these events transiently improves confinement and suppresses turbulence, and has a larger net effect when bursts are more frequent in Hydrogen discharges. This exactly offsets the increased gyro-Bohm related turbulence drive in Hydrogen which results in the same time-averaged turbulence level in Hydrogen as in Helium.

physics.plasm-ph↗

arXiv2008

How Polarization and Scattering can reveal Geometries, Dynamics, and Feeding of Active Galactic Nuclei

Gaskell et al. (2007) introduced polarization reverberation mapping as a new technique to explore the structure of active galactic nuclei. We present modeling results for the time-dependent polarization signal expected from scattering inside a centrally illuminated spheroid. Such a model setup describes a larger corona surrounding the compact source of an active nucleus. Time-delays between the polarized and the total flux are computed and related to the geometry of the cloud and the viewing angle. When including the in-flow dynamics of the cloud, it is possible to constrain its optical depth and velocity, which enables estimations of the mass inflow rate.

astro-ph↗

arXiv2007

Performance of the Charge Injection Capability of Suzaku XIS

A charge injection technique is applied to the X-ray CCD camera, XIS (X-ray Imaging Spectrometer) onboard Suzaku. The charge transfer inefficiency (CTI) in each CCD column (vertical transfer channel) is measured by the injection of charge packets into a transfer channel and subsequent readout. This paper reports the performances of the charge injection capability based on the ground experiments using a radiation damaged device, and in-orbit measurements of the XIS. The ground experiments show that charges are stably injected with the dispersion of 91eV in FWHM in a specific column for the charges equivalent to the X-ray energy of 5.1keV. This dispersion width is significantly smaller than that of the X-ray events of 113eV (FWHM) at approximately the same energy. The amount of charge loss during transfer in a specific column, which is measured with the charge injection capability, is consistent with that measured with the calibration source. These results indicate that the charge injection technique can accurately measure column-dependent charge losses rather than the calibration sources. The column-to-column CTI correction to the calibration source spectra significantly reduces the line widths compared to those with a column-averaged CTI correction (from 193eV to 173eV in FWHM on an average at the time of one year after the launch). In addition, this method significantly reduces the low energy tail in the line profile of the calibration source spectrum.

astro-ph↗

arXiv2007

Modeling the Polarization of Dusty Scattering Cones in Active Galactic Nuclei

We have used the STOKES radiative transfer code, to model polarization induced by dust scattering in the polar regions of Active Galactic Nuclei (AGN). We discuss the wavelength-dependence of the spectral intensity and polarization over the optical/UV range at different viewing angles for two different types of dust: a Galactic dust model, and a dust model inferred from extinction properties of AGN. The STOKES code and documentation are freely available at http://www.stokes-program.info/.

astro-ph↗

arXiv2007

AGN polarization modeling with STOKES

We introduce a new, publicly available Monte Carlo radiative transfer code, STOKES, which has been developed to model polarization induced by scattering off free electrons and dust grains. It can be used in a wide range of astrophysical applications. Here, we apply it to model the polarization produced by the equatorial obscuring and scattering tori assumed to exist in active galactic nuclei (AGNs). We present optical/UV modeling of dusty tori with a curved inner shape and for two different dust types: one composition reproduces extinction properties of our Galaxy, and the other is derived from composite quasar spectra. The polarization spectra enable us to clearly distinguish between the two dust compositions. The STOKES code and its documentation can be freely downloaded from http://www.stokes-program.info/.

astro-ph↗