arXiv subjects

M. Steffen

Publications and source records attributed to M. Steffen.

At least 55 records · Page 3Linked to original sources

arXiv2016

Enhanced methods for computing spectra from CO5BOLD models using Linfor3D. Molecular bands in metal-poor stars

Molecular features such as the G-band, CN-band and NH-band are important diagnostics for measuring a star's carbon and nitrogen abundances, especially in metal-poor stars where atomic lines are no longer visible in stellar spectra. Unlike atomic transitions, molecular features tend to form in bands, which cover large wavelength regions in a spectrum. While it is a trivial matter to compute carbon and nitrogen molecular bands under the assumption of 1D, it is extremely time consuming in 3D. In this contribution to the 2016 CO5BOLD workshop we review the improvements made to the 3D spectral synthesis code Linfor3D, and discuss the new challenges found when computing molecular features in 3D.

astro-ph.SR↗

arXiv2016

TOPoS: III. An ultra iron-poor multiple CEMP system

One of the primary objectives of the TOPoS survey is to search for the most metal-poor stars. Our search has led to the discovery of one of the most iron-poor objects known, SDSS\,J092912.32+023817.0. This object is a multiple system, in which two components are clearly detected in the spectrum. We have analysed 16 high-resolution spectra obtained using the UVES spectrograph at the ESO 8.2m VLT telescope to measure radial velocities and determine the chemical composition of the system. Cross correlation of the spectra with a synthetic template yields a double-peaked cross-correlation function (CCF) for eight spectra, and in one case there is evidence for the presence of a third peak. Chemical analysis of the spectrum obtained by averaging all the spectra for which the CCF showed a single peak found that the iron abundance is [Fe/H]=-4.97. The system is also carbon enhanced with [C/Fe]=+3.91 (A(C)=7.44). From the permitted oxygen triplet we determined an upper limit for oxygen of [O/Fe]<+3.52 such that C/O>1.3. We are also able to provide more stringent upper limits on the Sr and Ba abundances ([Sr/Fe]<+0.70, and [Ba/Fe]<+1.46, respectively).

astro-ph.GA↗

arXiv2016

Experimental demonstration of a resonator-induced phase gate in a multi-qubit circuit QED system

The resonator-induced phase (RIP) gate is a multi-qubit entangling gate that allows a high degree of flexibility in qubit frequencies, making it attractive for quantum operations in large-scale architectures. We experimentally realize the RIP gate with four superconducting qubits in a three-dimensional (3D) circuit-quantum electrodynamics architecture, demonstrating high-fidelity controlled-Z (CZ) gates between all possible pairs of qubits from two different 4-qubit devices in pair subspaces. These qubits are arranged within a wide range of frequency detunings, up to as large as 1.8 GHz. We further show a dynamical multi-qubit refocusing scheme in order to isolate out 2-qubit interactions, and combine them to generate a four-qubit Greenberger-Horne-Zeilinger state.

quant-ph↗

arXiv2016

Investigating surface loss effects in superconducting transmon qubits

Superconducting qubits are sensitive to a variety of loss mechanisms including dielectric loss from interfaces. By changing the physical footprint of the qubit it is possible to modulate sensitivity to surface loss. Here we show a systematic study of planar superconducting transmons of differing physical footprints to optimize the qubit design for maximum coherence. We find that qubits with small footprints are limited by surface loss and that qubits with large footprints are limited by other loss mechanisms which are currently not understood.

quant-ph↗

arXiv2016

An in-depth spectroscopic examination of molecular bands from 3D hydrodynamical model atmospheres I. Formation of the G-band in metal-poor dwarf stars

Recent developments in the three-dimensional (3D) spectral synthesis code Linfor3D have meant that, for the first time, large spectral wavelength regions, such as molecular bands, can be synthesised with it in a short amount of time. A detailed spectral analysis of the synthetic G-band for several dwarf turn-off-type 3D atmospheres (5850 <= T_eff [K] <= 6550, 4.0 <= log g <= 4.5, -3.0 <= [Fe/H] <= -1.0) was conducted, under the assumption of local thermodynamic equilibrium. We also examine carbon and oxygen molecule formation at various metallicity regimes and discuss the impact it has on the G-band. Using a qualitative approach, we describe the different behaviours between the 3D atmospheres and the traditional one-dimensional (1D) atmospheres and how the different physics involved inevitably leads to abundance corrections, which differ over varying metallicities. Spectra computed in 1D were fit to every 3D spectrum to determine the 3D abundance correction. Early analysis revealed that the CH molecules that make up the G-band exhibited an oxygen abundance dependency; a higher oxygen abundance leads to weaker CH features. Nitrogen abundances showed zero impact to CH formation. The 3D corrections are also stronger at lower metallicity. Analysis of the 3D corrections to the G-band allows us to assign estimations of the 3D abundance correction to most dwarf stars presented in the literature. The 3D corrections suggest that A(C) in CEMP stars with high A(C) would remain unchanged, but would decrease in CEMP stars with lower A(C). It was found that the C/O ratio is an important parameter to the G-band in 3D. Additional testing confirmed that the C/O ratio is an equally important parameter for OH transitions under 3D. This presents a clear interrelation between the carbon and oxygen abundances in 3D atmospheres through their molecular species, which is not seen in 1D.

astro-ph.SR↗

arXiv2015

Lithium spectral line formation in stellar atmospheres. The impact of convection and NLTE effects

Different simplified approaches are used to account for the non-local thermodynamic equilibrium (NLTE) effects with 3D hydrodynamical model atmospheres. In certain cases, chemical abundances are derived in 1D NLTE and corrected for the 3D effects by adding 3D-1D LTE abundance corrections (3D+NLTE approach). Alternatively, average <3D> model atmospheres are sometimes used to substitute for the full 3D hydrodynamical models. We tested whether the results obtained using these simplified schemes (i.e., 3D+NLTE, <3D> NLTE) may reproduce those derived using the full 3D NLTE computations. The tests were made using 3D hydrodynamical CO5BOLD model atmospheres of the main sequence (MS), main sequence turn-off (TO), subgiant (SGB), and red giant branch (RGB) stars, all at [M/H]=0.0 and -2.0. Our goal was to investigate the role of 3D and NLTE effects on the formation of the 670.8 nm lithium line by assessing strengths of synthetic 670.8 nm line profiles, computed using 3D/1D NLTE/LTE approaches. Our results show that Li 670.8 nm line strengths obtained using different methodologies differ only slightly in most of the models at solar metallicity. However, the line strengths predicted with the 3D NLTE and 3D+NLTE approaches become significantly different at subsolar metallicities. At [M/H]=-2.0, this may lead to (3D NLTE)-(3D+NLTE) differences in the predicted lithium abundance of ~0.46 and ~0.31 dex in the TO and RGB stars, respectively. On the other hand, NLTE line strengths computed with the average <3D> and 1D model atmospheres are similar to those obtained with the full 3D NLTE approach for MS, TO, SGB, and RGB stars, at all metallicities; 3D-<3D> and 3D-1D differences in the predicted abundances are always less than ~0.04 dex and ~0.08 dex, respectively. However, neither of the simplified approaches can reliably substitute 3D NLTE spectral synthesis when precision is required.

astro-ph.SR↗

arXiv2015

Chemical composition of a sample of bright solar-metallicity stars

We present a detailed analysis of seven young stars observed with the spectrograph SOPHIE at the Observatoire de Haute-Provence for which the chemical composition was incomplete or absent in the literature. For five stars, we derived the stellar parameters and chemical compositions using our automatic pipeline optimized for F, G, and K stars, while for the other two stars with high rotational velocity, we derived the stellar parameters by using other information (parallax), and performed a line-by-line analysis. Chromospheric emission-line fluxes from CaII are obtained for all targets. The stellar parameters we derive are generally in good agreement with what is available in the literature. We provide a chemical analysis of two of the stars for the first time. The star HIP 80124 shows a strong Li feature at 670.8 nm implying a high lithium abundance. Its chemical pattern is not consistent with it being a solar sibling, as has been suggested.

astro-ph.SR↗

arXiv2015

On The Evolution of Magnetic White Dwarfs

We present the first radiation magnetohydrodynamics simulations of the atmosphere of white dwarf stars. We demonstrate that convective energy transfer is seriously impeded by magnetic fields when the plasma-beta parameter, the thermal to magnetic pressure ratio, becomes smaller than unity. The critical field strength that inhibits convection in the photosphere of white dwarfs is in the range B = 1-50 kG, which is much smaller than the typical 1-1000 MG field strengths observed in magnetic white dwarfs, implying that these objects have radiative atmospheres. We have then employed evolutionary models to study the cooling process of high-field magnetic white dwarfs, where convection is entirely suppressed during the full evolution (B > 10 MG). We find that the inhibition of convection has no effect on cooling rates until the effective temperature (Teff) reaches a value of around 5500 K. In this regime, the standard convective sequences start to deviate from the ones without convection owing to the convective coupling between the outer layers and the degenerate reservoir of thermal energy. Since no magnetic white dwarfs are currently known at the low temperatures where this coupling significantly changes the evolution, effects of magnetism on cooling rates are not expected to be observed. This result contrasts with a recent suggestion that magnetic white dwarfs with Teff < 10,000 K cool significantly slower than non-magnetic degenerates.

astro-ph.SR↗

arXiv2015

The photospheric solar oxygen project: IV. 3D-NLTE investigation of the 777 nm triplet lines

The solar photospheric oxygen abundance is still widely debated. Adopting the solar chemical composition based on the "low" oxygen abundance, as determined with the use of three-dimensional (3D) hydrodynamical model atmospheres, results in a well-known mismatch between theoretical solar models and helioseismic measurements that is so far unresolved. We carry out an independent redetermination of the solar oxygen abundance by investigating the center-to-limb variation of the OI IR triplet lines at 777 nm in different sets of spectra with the help of detailed synthetic line profiles based on 3D hydrodynamical CO5BOLD model atmospheres and 3D non-LTE line formation calculations with NLTETD. The idea is to simultaneously derive the oxygen abundance,A(O), and the scaling factor SH that describes the cross-sections for inelastic collisions with neutral hydrogen relative the classical Drawin formula. The best fit of the center-to-limb variation of the triplet lines achieved with the CO5BOLD 3D solar model is clearly of superior quality compared to the line profile fits obtained with standard 1D model atmospheres. Our best estimate of the 3D non-LTE solar oxygen abundance is A(O) = 8.76 +/- 0.02, with the scaling factor SH in the range between 1.2 and 1.8. All 1D non-LTE models give much lower oxygen abundances, by up to -0.15 dex. This is mainly a consequence of the assumption of a $μ$-independent microturbulence.

astro-ph.SR↗

arXiv2015

3D Model Atmospheres for Extremely Low-Mass White Dwarfs

We present an extended grid of mean three-dimensional (3D) spectra for low-mass, pure-hydrogen atmosphere DA white dwarfs (WDs). We use CO5BOLD radiation-hydrodynamics 3D simulations covering Teff = 6000-11,500 K and logg = 5-6.5 (cgs units) to derive analytical functions to convert spectroscopically determined 1D temperatures and surface gravities to 3D atmospheric parameters. Along with the previously published 3D models, the 1D to 3D corrections are now available for essentially all known convective DA WDs (i.e., logg = 5-9). For low-mass WDs, the correction in temperature is relatively small (a few per cent at the most), but the surface gravities measured from the 3D models are lower by as much as 0.35 dex. We revisit the spectroscopic analysis of the extremely low-mass (ELM) WDs, and demonstrate that the 3D models largely resolve the discrepancies seen in the radius and mass measurements for relatively cool ELM WDs in eclipsing double WD and WD + milli-second pulsar binary systems. We also use the 3D corrections to revise the boundaries of the ZZ Ceti instability strip, including the recently found ELM pulsators.

astro-ph.SR↗

arXiv2015

The photospheric solar oxygen project: III. Investigation of the centre-to-limb variation of the 630nm [OI]-NiI blend

The solar photospheric abundance of oxygen is still a matter of debate. For about ten years some determinations have favoured a low oxygen abundance which is at variance with the value inferred by helioseismology. Among the oxygen abundance indicators, the forbidden line at 630nm has often been considered the most reliable even though it is blended with a NiI line. In Papers I and Paper II of this series we reported a discrepancy in the oxygen abundance derived from the 630nm and the subordinate [OI] line at 636nm in dwarf stars, including the Sun. Here we analyse several, in part new, solar observations of the the centre-to-limb variation of the spectral region including the blend at 630nm in order to separate the individual contributions of oxygen and nickel. We analyse intensity spectra observed at different limb angles in comparison with line formation computations performed on a CO5BOLD 3D hydrodynamical simulation of the solar atmosphere. The oxygen abundances obtained from the forbidden line at different limb angles are inconsistent if the commonly adopted nickel abundance of 6.25 is assumed in our local thermodynamic equilibrium computations. With a slightly lower nickel abundance, A(Ni)~6.1, we obtain consistent fits indicating an oxygen abundance of A(O)=8.73+/-0.05. At this value the discrepancy with the subordinate oxygen line remains. The derived value of the oxygen abundance supports the notion of a rather low oxygen abundance in the solar hotosphere. However, it is disconcerting that the forbidden oxygen lines at 630 and 636nm give noticeably different results, and that the nickel abundance derived here from the 630nm blend is lower than expected from other nickel lines.

astro-ph.SR↗

arXiv2015

Rapid Driven Reset of a Qubit Readout Resonator

Using a circuit QED device, we demonstrate a simple qubit measurement pulse shape that yields fast ring-up and ring-down of the readout resonator regardless of the qubit state. The pulse differs from a square pulse only by the inclusion of additional constant-amplitude segments designed to effect a rapid transition from one steady-state population to another. Using a Ramsey experiment performed shortly after the measurement pulse to quantify the residual population, we find that compared to a square pulse followed by a delay, this pulse shape reduces the timescale for cavity ring-down by more than twice the cavity time constant. At low drive powers, this performance is achieved using pulse parameters calculated from a linear cavity model; at higher powers, empirical optimization of the pulse parameters leads to similar performance.

quant-ph↗

arXiv2015

TOPoS: II. On the bimodality of carbon abundance in CEMP stars. Implications on the early chemical evolution of galaxies

In the course of the TOPoS (Turn Off Primordial Stars) survey, aimed at discovering the lowest metallicity stars, we have found several carbon-enhanced metal-poor (CEMP) stars. We here present our analysis of six CEMP stars. Calcium and carbon are the only elements that can be measured in all six stars. The range is -5.0<=[Ca/H]< -2.1 and 7.12<=A(C)<=8.65. For star SDSS J1742+2531 we were able to detect three FeI lines from which we deduced [Fe/H]=-4.80, from four CaII lines we derived [Ca/H]=-4.56, and from synthesis of the G-band we derived A(C)=7.26. For SDSS J1035+0641 we were not able to detect any iron lines, yet we could place a robust (3sigma) upper limit of [Fe/H]< -5.0 and measure the Ca abundance, with [Ca/H]=-5.0, and carbon, A(C)=6.90. No lithium is detected in the spectrum of SDSS J1742+2531 or SDSS J1035+0641, which implies a robust upper limit of A(Li)<1.8 for both stars. Our measured carbon abundances confirm the bimodal distribution of carbon in CEMP stars, identifying a high-carbon band and a low-carbon band. We propose an interpretation of this bimodality according to which the stars on the high-carbon band are the result of mass transfer from an AGB companion, while the stars on the low-carbon band are genuine fossil records of a gas cloud that has also been enriched by a faint supernova (SN) providing carbon and the lighter elements. (Abridged)

astro-ph.GA↗

arXiv2015

SSALMON - The Solar Simulations for the Atacama Large Millimeter Observatory Network

The Solar Simulations for the Atacama Large Millimeter Observatory Network (SSALMON) was initiated in 2014 in connection with two ALMA development studies. The Atacama Large Millimeter/submillimeter Array (ALMA) is a powerful new tool, which can also observe the Sun at high spatial, temporal, and spectral resolution. The international SSALMONetwork aims at coordinating the further development of solar observing modes for ALMA and at promoting scientific opportunities for solar physics with particular focus on numerical simulations, which can provide important constraints for the observing modes and can aid the interpretation of future observations. The radiation detected by ALMA originates mostly in the solar chromosphere - a complex and dynamic layer between the photosphere and corona, which plays an important role in the transport of energy and matter and the heating of the outer layers of the solar atmosphere. Potential targets include active regions, prominences, quiet Sun regions, flares. Here, we give a brief overview over the network and potential science cases for future solar observations with ALMA.

astro-ph.SR↗

arXiv2015

Three-dimensional hydrodynamical CO5BOLD model atmospheres of red giant stars. IV. Oxygen diagnostics in extremely metal-poor red giants with infrared OH lines

Context. Although oxygen is an important tracer of Galactic chemical evolution, measurements of its abundance in the atmospheres of the oldest Galactic stars are still scarce and rather imprecise. At the lowest end of the metallicity scale, oxygen can only be measured in giant stars and in most of cases such measurements rely on a single forbidden [O I] 630 nm line that is very weak and frequently blended with telluric lines. Although molecular OH lines located in the ultraviolet and infrared could also be used for the diagnostics, oxygen abundances obtained from the OH lines and the [O I] 630 nm line are usually discrepant to a level of ~0.3-0.4 dex. Aims. We study the influence of convection on the formation of the infrared (IR) OH lines and the forbidden [O I] 630 nm line in the atmospheres of extremely metal-poor (EMP) red giant stars. Methods. We used high-resolution and high signal-to-noise ratio spectra of four EMP red giant stars obtained with the VLT CRIRES spectrograph. For each EMP star, 4-14 IR OH vibrational-rotational lines located in the spectral range of 1514-1548 and 1595-1632 nm were used to determine oxygen abundances by employing standard 1D LTE abundance analysis methodology. We then corrected the 1D LTE abundances obtained from each individual OH line for the 3D hydrodynamical effects. Results. We find that the influence of convection on the formation of [O I] 630 nm line in the atmospheres of EMP giants studied here is minor, which leads to very small 3D-1D abundance corrections (< -0.01 dex). On the contrary, IR OH lines are strongly affected by convection and thus the abundance corrections for these lines are significant, 3D-1D ~ -0.2 ... -0.3 dex. These abundance corrections do indeed bring the 1D LTE oxygen abundances of EMP red giants obtained using IR OH lines into better agreement with those determined from the [O I] 630 nm line.

astro-ph.SR↗

arXiv2014

The Chandra Planetary Nebulae Survey (ChanPlaNS): III. X-ray Emission from the Central Stars of Planetary Nebulae

We present X-ray spectral analysis of 20 point-like X-ray sources detected in Chandra Planetary Nebula Survey (ChanPlaNS) observations of 59 planetary nebulae (PNe) in the solar neighborhood. Most of these 20 detections are associated with luminous central stars within relatively young, compact nebulae. The vast majority of these point-like X-ray-emitting sources at PN cores display relatively "hard" ($\geq0.5$~keV) X-ray emission components that are unlikely to be due to photospheric emission from the hot central stars (CSPN). Instead, we demonstrate that these sources are well modeled by optically-thin thermal plasmas. From the plasma properties, we identify two classes of CSPN X-ray emission: (1) high-temperature plasmas with X-ray luminosities, $L_{\rm X}$, that appear uncorrelated with the CSPN bolometric luminosity, $L_{\rm bol}$; and (2) lower-temperature plasmas with $L_{\rm X}/L_{\rm bol}\sim10^{-7}$. We suggest these two classes correspond to the physical processes of magnetically active binary companions and self-shocking stellar winds, respectively. In many cases this conclusion is supported by corroborative multiwavelength evidence for the wind and binary properties of the PN central stars. By thus honing in on the origins of X-ray emission from PN central stars, we enhance the ability of CSPN X-ray sources to constrain models of PN shaping that invoke wind interactions and binarity.

astro-ph.SR↗

arXiv2014

Calibration of the Mixing-Length Theory for Convective White Dwarf Envelopes

A calibration of the mixing-length parameter in the local mixing-length theory (MLT) is presented for the lower part of the convection zone in pure-hydrogen atmosphere white dwarfs. The parameterization is performed from a comparison of 3D CO5BOLD simulations with a grid of 1D envelopes with a varying mixing-length parameter. In many instances, the 3D simulations are restricted to the upper part of the convection zone. The hydrodynamical calculations suggest, in those cases, that the entropy of the upflows does not change significantly from the bottom of the convection zone to regions immediately below the photosphere. We rely on this asymptotic entropy value, characteristic of the deep and adiabatically stratified layers, to calibrate 1D envelopes. The calibration encompasses the convective hydrogen-line (DA) white dwarfs in the effective temperature range 6000 < Teff (K) < 15,000 and the surface gravity range 7.0 < log g < 9.0. It is established that the local MLT is unable to reproduce simultaneously the thermodynamical, flux, and dynamical properties of the 3D simulations. We therefore propose three different parameterizations for these quantities. The resulting calibration can be applied to structure and envelope calculations, in particular for pulsation, chemical diffusion, and convective mixing studies. On the other hand, convection has no effect on the white dwarf cooling rates until there is a convective coupling with the degenerate core below Teff ~ 5000 K. In this regime, the 1D structures are insensitive to the MLT parameterization and converge to the mean 3D results, hence remain fully appropriate for age determinations.

astro-ph.SR↗

arXiv2014

Detecting arbitrary quantum errors via stabilizer measurements on a sublattice of the surface code

To build a fault-tolerant quantum computer, it is necessary to implement a quantum error correcting code. Such codes rely on the ability to extract information about the quantum error syndrome while not destroying the quantum information encoded in the system. Stabilizer codes are attractive solutions to this problem, as they are analogous to classical linear codes, have simple and easily computed encoding networks, and allow efficient syndrome extraction. In these codes, syndrome extraction is performed via multi-qubit stabilizer measurements, which are bit and phase parity checks up to local operations. Previously, stabilizer codes have been realized in nuclei, trapped-ions, and superconducting qubits. However these implementations lack the ability to perform fault-tolerant syndrome extraction which continues to be a challenge for all physical quantum computing systems. Here we experimentally demonstrate a key step towards this problem by using a two-by-two lattice of superconducting qubits to perform syndrome extraction and arbitrary error detection via simultaneous quantum non-demolition stabilizer measurements. This lattice represents a primitive tile for the surface code, which is a promising stabilizer code for scalable quantum computing. Furthermore, we successfully show the preservation of an entangled state in the presence of an arbitrary applied error through high-fidelity syndrome measurement. Our results bolster the promise of employing lattices of superconducting qubits for larger-scale fault-tolerant quantum computing.

quant-ph↗