arXiv subjects

M. T. Nasir

Publications and source records attributed to M. T. Nasir.

7 recordsLinked to original sources

arXiv2017

Recently synthesized (Zr1-xTix)2AlC (0 - x - 1) solid solutions: Theoretical study of the effects of M mixing on physical properties

The effects of M atomic species mixing on the physical properties of newly synthesized MAX phase (Zr1-xTix)2AlC solid solutions have been studied by means of density functional theory (DFT) calculations. The lattice constants in good accord with the experimental results, are found to decrease with Ti content. The elastic constants, Cij, and the other polycrystalline elastic moduli have been calculated. The elastic constants satisfy the mechanical stability conditions of these solid solutions. The constants C11, C33 and C44 are found to increase with Ti contents up to x = 0.67, thereafter these decrease slightly. A reverse trend is followed by C12 and C13. The elastic moduli are also found to increase up to x = 0.67, beyond which these moduli go down slightly. Pughs ratio and Poissons ratio both confirm the brittleness of (Zr1-xTix)2AlC. Different anisotropy factors revealed the anisotropic character of these solid solutions. A non-vanishing value of the electronic energy density of states (EDOS) at the Fermi level suggests that (Zr1-xTix)2AlC are metallic in nature. A mixture of covalent, ionic and metallic bonding has been indicated from the electronic structure with dominant covalent bonding due to hybridization of Zr-4d states and C-2p states. The variation of elastic stiffness and elastic parameters with x is seen to be correlated with partial DOS (PDOS) and charge density distribution. The calculated Debye temperature and minimum thermal conductivity are found to increase with Ti contents, while melting temperature is the highest for x = 0.67. The solid solution with x = 0.67 shows improved mechanical and thermal properties compared to that of the two end members Zr2AlC and Ti2AlC. The study of charge transport properties of (Zr1-xTix)2AlC reveals the metallic nature with saturated resistivity. The maximum power factor is obtained at 400 K for (Zr1-xTix)2AlC.

cond-mat.mtrl-sci↗

arXiv2017

First-principles study of superconducting ScRhP and ScIrP pnictides

For the first time, we have reported in this study an ab initio investigation on elastic properties, Debye temperature, Mulliken population, Vickers hardness, and charge density of superconducting ScRhP and ScIrP phosphides. The optimized cell parameters show fair agreement with experimental results. The elastic constants and moduli, Poisson's as well as Pugh's ratio and elastic anisotropy factors have also been calculated to understand the mechanical behavior of these ternary compounds. Their mechanical stability is confirmed via the calculated elastic constants. The calculated values for Poisson's and Pugh's ratio indicate the ductile nature of these compounds. ScIrP is expected to be elastically more anisotropic than ScRhP. The estimated value of Debye temperature predicts that ScRhP is thermally more conductive than ScIrP and the phonon frequency in ScRhP is higher than that in ScIrP. The hardness of ScRhP is lower due to the presence of anti-bonding Rh-Rh in ScRhP. The investigated electronic structure predict that the metallic conductivity of ScRhP reduces significantly when Rh is replaced with Ir. The main contribution to the total density of states (TDOS) at Fermi-level (EF) comes from the d-electrons of Sc and Rh/Ir in both compounds. These two ternary compounds are characterized mainly by metallic and covalent bonding with little ionic contribution. As far as superconductivity is concerned, the matrix elements of electron-phonon interaction are noticeably enhanced in ScIrP compared to that in ScRhP.

cond-mat.mtrl-sci↗

arXiv2016

First-principles prediction of mechanical and bonding characteristics of new T2 superconductor Ta5GeB2

In the present paper, DFT (Density Functional Theory) based first-principles methods are applied to investigate the mechanical and bonding properties of newly synthesized T2 phase superconductor Ta5GeB2 for the first time. The calculated lattice constants are in reasonable agreement with the experiment. The elastic constants (Cij), bulk modulus (B), shear modulus (G), Young's modulus (Y), Poisson ratio (nu), Pugh ratio (G/B), and elastic anisotropy factor, A, of Ta5GeB2 are calculated to explore the mechanical behavior of the compound.To give an explanation of the bonding nature of this new ternary tetragonal system, the band structure, density of states, and Mulliken atomic population are investigated. The estimated Debye temperature and Vickers hardness are also used to justify both the mechanical and bonding properties of Ta5GeB2.

cond-mat.mtrl-sci↗

arXiv2016

Ab initio Investigation of Vibrational, Thermodynamic, and Optical properties of Sc2AlC MAX compound

The structural, vibrational, thermodynamical and optical properties of technologically important, weakly coupled MAX compound, Sc2AlC are calculated using density functional theory (DFT). The structural properties of Sc2AlC are compared with results reported earlier. The vibrational, thermodynamical, and optical properties are theoretically estimated for the first time. The phonon dispersion curve has been calculated and the dynamical stability of this compound has been investigated. The optical and acoustic modes are observed clearly. We have calculated the Helmholtz free energy (F), internal energy (E), entropy (S) and specific heat capacity (Cv) from the phonon density of states. Various optical parameters have also been calculated. The reflectance spectrum shows that it this compound has the potential to be used as a solar reflector.

cond-mat.mtrl-sci↗

arXiv2016

Structural, elastic, and electronic properties of newly discovered Li2PtSi3 superconductor: Effect of transition metals

First-principles calculations within the density functional theory (DFT) with GGA-PBE exchange-correlation scheme have been employed to predict the structural, the elastic and the electronic properties of newly discovered lithium silicide superconductor, Li2PtSi3, for the first time. All the theoretical results are compared with those calculated recently for isostructural Li2IrSi3. The present study sheds light on the effect of replacement of transition metal element Ir with Pt on different mechanical, electronic, and superconducting properties. The effect of spin-orbit coupling on electronic band structure was found to be insignificant for Li2PtSi3. The difference in superconducting transition temperatures of Li2PtSi3 and Li2IrSi3 arises primarily due to the difference in electronic energy density of states at the Fermi level. Somewhat reduced Debye temperature in Li2PtSi3 plays a minor role. We have discussed the implications of the theoretical results in details in this study.

cond-mat.supr-con↗

arXiv2015

Structural, Elastic, and Electronic Properties of Recently Discovered Ternary Silicide Superconductor Li2IrSi3: An ab-initio Study

The structural, elastic, and electronic properties of the very recently discovered ternary silicide superconductor, Li2IrSi3, have been calculated using ab-initio technique. We have carried out the plane-wave pseudopotential approach within the framework of the first-principles density functional theory (DFT) implemented within the CASTEP code. The calculated structural parameters show a reasonable agreement with the experimental results. Elastic moduli of this interesting material have been calculated for the first time. The electronic band structure and electronic energy density of states indicate the strong covalent Ir-Si and Si-Si bonding which lead to the formation of the rigid structure of Li2IrSi3. Strong covalency give rise to a high Debye temperature in this system. We have discussed the theoretical results in detail in this paper.

cond-mat.supr-con↗

arXiv2012

Superconducting MAX phases Nb2AC (A = S, Sn): An ab-initio study

An ab-initio investigation of structural parameters, elastic, electronic, thermodynamic and optical properties of MAX phases Nb2AC (A = S, Sn) has been carried out by the plane wave psedudopotential method based on density functional theory (DFT). The effect on results of substitution of heavier Sn atoms for the lighter S atoms in the nanolaminate network has been made. The analysis of the electronic band structure shows that these compounds are electrical conductors, with contribution predominantly from the Nb 4d states. The temperature and pressure dependence of bulk modulus, Debye temperature, specific heats, thermal expansion coefficient of the nanolaminates are calculated for the first time using the quasi-harmonic Debye model with phononic effects. The estimated values of electron-phonon coupling constants (lambda ~ 0.49, ~0.59) imply that Nb2SC and Nb2SnC are moderately coupled superconductors. Further first time detailed analysis of all optical functions reveals that Nb2SC is a better dielectric material, and also both the phases, having similar reflectivity spectra, show promise as good coating materials in the energy regions 10-16.5 eV. Keywords: Nb2SC; Nb2SnC; First-principles; Mechanical properties; Quasi-harmonic Debye model; Band structure; Thermodynamic properties; Optical properties

cond-mat.supr-con↗