SearcharxivSearch

arXiv subjects

M. V. Rakhlin

Publications and source records attributed to M. V. Rakhlin.

8 recordsLinked to original sources

Purcell enhancement in layered InSe on the Mie-resonant silicon nitride waveguide

Layered van der Waals semiconductors are promising active materials for nanoscale photonic and optoelectronic devices because their excitonic emission can be integrated with heterogeneous photonic architectures. For on-chip applications, this emission must be efficiently coupled to guided modes, while its recombination dynamics should be controlled by the local photonic environment. Although dielectric waveguides enable such integration, substantial control over radiative recombination generally requires resonant engineering of the local photonic density of states. Resonant dielectric nanostructures provide such control by modifying the photonic environment while preserving compatibility with guided-wave photonic architectures. Here, we demonstrate Purcell-enhanced excitonic emission from a thin InSe flake integrated with a Mie-resonant Si$_3$N$_4$ waveguide. The structure incorporates a resonant nanoparticle array with a resonance that overlaps the InSe PL band, thereby enhancing excitonic coupling to the guided mode. Optical spectroscopy confirms the designed resonance, while micro-photoluminescence measurements reveal enhanced and spectrally selective waveguide-coupled emission. Time-resolved photoluminescence measurements show a threefold shortening of the excitonic decay time relative to planar InSe. Analysis of the decay dynamics using a simple rate-equation model yields an effective Purcell factor of approximately 3 for the dominant out-of-plane excitonic emission channel. These results establish Mie-resonant dielectric waveguides as a compact platform for on-chip control of excitonic recombination in layered semiconductors.

cond-mat.mes-hall

Noise-tolerant tomography of multimode linear optical interferometers with single photons

Linear optical networks are fundamental to the advancement of quantum technologies, including quantum computing, communication, and sensing. The accurate characterization of these networks, described by unitary matrices, is crucial to their effective utilization and scalability. In this work, we present the method for reconstructing the transfer matrix of a linear optical interferometer based on the analysis of cross-correlation functions of photon counts between pairs of output modes. Our approach accounts for losses and photon indistinguishability, making it robust to experimental imperfections. By minimizing the requirements for the input states, the method simplifies the experimental implementation. We demonstrate the effectiveness of our technique through theoretical modeling and experimental validation in a 4-mode programmable integrated optical interferometer. The results show high fidelity in matrix reconstruction and successful application in boson sampling experiments. In addition, we provide a comprehensive formalism for correlation functions and discuss the robustness of the method to measurement errors. This work offers a practical and efficient solution for characterizing linear-optical networks, paving the way for scaling up photonic quantum technologies.

quant-ph

Photoluminescence Features of Few-Layer Hexagonal $α$-In$_2$Se$_3$

Indium (III) selenide is currently one of the most actively studied materials in the two-dimensional family due to its remarkable ferroelectric and optical properties. This study focuses on the luminescent properties of few-layer In$_2$Se$_3$ flakes with thicknesses ranging from 7 to 100 monolayers. To explore the photoluminescence features and correlate them with changes in crystal symmetry and surface potential, we employed a combination of techniques, including temperature-dependent micro-photoluminescence, time-resolved photoluminescence, Raman spectroscopy, atomic force microscopy, and Kelvin probe force microscopy. X-ray diffraction and Raman spectroscopy confirmed that the samples studied possess the $α$-polytype structure. The micro-photoluminescence spectrum consists of two bands, A and B, with band B almost completely disappearing at room temperature. Temperature-dependent photoluminescence and time-resolved measurements helped us to elucidate the nature of the observed bands. We find that peak A is associated with emission from interband transitions in In$_2$Se$_3$, while peak B is attributed to defect-related emission. Additionally, the photoluminescence decay times of In$_2$Se$_3$ flakes with varying thicknesses were determined. No significant changes were observed in the decay components as the thickness increased from 7 to 100 monolayers, suggesting that there are no qualitative changes in the band structure.

cond-mat.mtrl-sci

Stimulated down-conversion of single-photon emission in a quantum dot placed in a target-frequency microcavity

Currently, two optical processes are mainly used to realize single photon sources: deterministic transitions in a semiconductor quantum dot (QD) placed in a microcavity and spontaneous frequency down-conversion in materials with intrinsic nonlinearity. In this work, we consider another approach that combines the advantages of both, such as high power with on-demand generation from QDs and the possibility of frequency tuning from nonlinear sources. For this purpose, we use stimulated frequency down-conversion occurring directly in the QD inside a microcavity designed not to the exciton frequency in the QD but to the target single photon frequency, which is set by the difference between the exciton resonance and the stimulating laser energies. This down-conversion arises from the second-order nonlinear interaction of an exciton (bright heavy-hole or dark) and a light-hole exciton in the stimulating laser field. We present an analytical model for such a down-conversion process and evaluate its efficiency for a widely sought-after single photon source for the telecom C-band (1530-1565 nm). We show that the emission rate of down-converted single photons can approach MHz. At certain conditions, this process is comparable in efficiency to direct emission from an InAs/GaAs QD at 920 nm, which is outside the cavity mode.

cond-mat.mes-hall

Programmable entangled qubit states on a linear-optical platform

We present an experimental platform for linear-optical quantum information processing. Our setup utilizes multiphoton generation using a high-quality single-photon source, which is demultiplexed across multiple spatial channels, a custom-designed, programmable, low-loss photonic chip, and paired with high-efficiency single-photon detectors. We demonstrate the platform's capability in producing heralded arbitrary two-qubit dual-rail encoded states, a crucial building block for large-scale photonic quantum computers. The programmable chip was fully characterized through a calibration process that allowed us to create a numerical model accounting for fabrication imperfections and measurement errors. As a result, using on-chip quantum state tomography (QST), we achieved high-fidelity quantum state preparation, with a fidelity of 98.5\% specifically for the Bell state.

quant-ph

Direct observation of split-mode exciton-polaritons in a single MoS$_2$ nanotube

A single nanotube synthesized from a transition metal dichalcogenide (TMDC) exhibits strong exciton resonances and, in addition, can support optical whispering gallery modes. This combination is promising for observing exciton-polaritons without an external cavity. However, traditional energy-momentum-resolved detection methods are unsuitable for this tiny object. Instead, we propose to use split optical modes in a twisted nanotube with the flattened cross-section, where a gradually decreasing gap between the opposite walls leads to a change in mode energy, similar to the effect of the barrier width on the eigenenergies in the double-well potential. Using micro-reflectance spectroscopy, we investigated the rich pattern of polariton branches in single MoS$_2$ tubes with both variable and constant gaps. Observed Rabi splitting in the 40 - 60 meV range is comparable to that for a MoS$_2$ monolayer in a microcavity. Our results, based on the polariton dispersion measurements and polariton dynamics analysis, present a single TMDC nanotube as a perfect polaritonic structure for nanophotonics.

cond-mat.mes-hall

Demultiplexed Single-Photon Source with a Quantum Dot Coupled to Microresonator

The characteristics of a single-photon emitter based on a semiconductor quantum dot, such as their indistinguishability and brightness, depend on the stability of the recombination channel, which can switch spontaneously between exciton and trion. We show that dominant recombination through neutral exciton states can be achieved by careful control of the doping profile near an epitaxial InAs/GaAs quantum dot placed in a columnar microcavity with distributed Bragg reflectors. The Hong-Ou-Mandel experiments carried out in the fabricated device demonstrate the degree of indistinguishability of 91% of successively emitted single photons within 242 ns at an efficiency of 10% inside a single-mode optical fiber. The achieved brightness made it possible to implement spatio-temporal demultiplexing of photons in six independent spatial modes with an in-fiber generation frequency of more than 0.1 Hz.

quant-ph

Towards exciton-polaritons in MoS$_2$ nanotubes

We measure low-temperature micro-photoluminescence spectra along a MoS$_2$ nanotube, which exhibit the peaks of the optical whispering gallery modes below the exciton resonance. The variation of the position and intensity of these peaks is used to quantify the change of the nanotube geometry. The width of the peaks is shown to be determined by the fluctuations of the nanotube wall thickness and propagation of the detected optical modes along the nanotube. We analyse the dependence of the energies of the optical modes on the wave vector along the nanotube axis and demonstrate the potential of the high-quality nanotubes for realization of the strong coupling between exciton and optical modes with the Rabi splitting reaching 400 meV. We show how the formation of exciton-polaritons in such structures will be manifested in the micro-photoluminescence spectra.

cond-mat.mes-hall