arXiv subjects

M. Venkata Kamalakar

Publications and source records attributed to M. Venkata Kamalakar.

At least 19 recordsLinked to original sources

arXiv2026

Exciton-induced magnons carrying orbital angular momentum in CrI3

Magnons are collective spin excitations that contain and transport spin angular momentum in magnetic materials. It has been suggested that they can also carry orbital angular momentum in analogy to the electronic motion around the nucleus. We explore the real-space topology of magnon wave-packets emanating from atomic-like excitons in the ferromagnetic insulator CrI3 and demonstrate the existence of orbital angular momentum in such wave-packets. We reveal that orbital angular momentum of magnons is nearly equal to their spin angular momentum and compensates the latter. This illustrates the existence of an unexplored internal angular momentum balance and demonstrates that the magnetization can be quenched without the need of angular momentum exchange with the lattice.

cond-mat.mtrl-sci↗

arXiv2026

Tunnel-Barrier-Engineered Ultrafast Demagnetization and Spin Transport in Graphene-Based Heterostructures

Heterostructures combining graphene with 3d transition metal ferromagnets (FMs) enable various spin-based phenomena at ultrafast timescales. However, challenges such as the interfacial impedance mismatch, FM deposition-induced defect generation, and interface modification by interfacial coupling or hybridization can impede their functionalization for spin-orbitronics. In this work, we utilize insulating TiOx barrier layers (BLs) to modify the interfacial spin conductance structurally, disentangle spin pumping and magnetic proximity effects (MPE), and establish external control over ultrafast magnetization dynamics in single-layer graphene/TiOx/Co systems. All-optical time-resolved magneto-optical Kerr effect measurements of femtosecond to nanosecond spin dynamics reveal systematic tunability of ultrafast magnetic parameters via barrier engineering. The thickness-dependent damping modulation in Co indicates strong spin pumping, with interfacial spin transparency close to half its physical limit in the presence of an ultrathin BL, where MPE is eliminated. Our results show that appropriately chosen ultrathin BLs can prevent interfacial alterations from ferromagnetic metals, facilitating efficient spin detection in graphene and enhancing control over spin angular momentum dissipation in graphene/FM interfaces.

cond-mat.mes-hall↗

arXiv2024

Direct observation of nanometer-scale orbital angular momentum accumulation

Conversion of charge to orbital angular momentum through the orbital Hall effect (OHE) holds transformative potential for the development of orbital-based electronics, however, it is challenging to directly observe the electrically generated orbital accumulation. Here, we detect the OHE by directly quantifying the orbital accumulation along the edges of a titanium thin film using a scanning transmission electron microscope. We measure the Ti L-edge using electron energy-loss spectroscopy with nanometer resolution and find a sizable orbital accumulation at the sample's outer perimeters, consistent with all signatures expected for the OHE, and determine an orbital diffusion length $\ell_o \approx 7.3$ nm. Our data points to a surprising dependence of the orbital diffusion length on the nano-structural morphology.

cond-mat.mes-hall↗

arXiv2022

sp$^{2}$/sp$^{3}$ bonding controlling mechanism at the $α$-Al$_{2}$O$_{3}|$graphene interface

First-principles calculations reported here illuminate the effects of the interfacial properties of $α$-Al$_{2}$O$_{3}$ and graphene, with emphasis on the structural and electronic properties. Various contact interfaces and different $α$-Al$_{2}$O$_{3}$ surface terminations are considered with on and slightly-off stoichiometric aluminium oxide. We show that depending on whether aluminium or oxygen is in contact with graphene, an $sp^{3}$ structural deformation and spontaneous spin-polarization may occur next to the interface contact. Interestingly, some cases cause a $p$-type doping in the graphene band structure, depending on the initial $α$-Al$_{2}$O$_{3}$ geometry placed on graphene. The importance of leaving the surface dangling bonds of alumina saturated or not is also highlighted, and we show that it might be a control mechanism for opening a gap in graphene by the influence of the $sp^{3}$ bond between oxygen and carbon atoms at the interface. We discuss the potential of utilizing this sensitivity for practical applications.

cond-mat.mtrl-sci↗

arXiv2020

Flexible ferromagnetic nanowires with ultralow magnetostriction

Integration of magneto-electric and spintronic sensors presents a massive potential for advancing flexible and wearable technology. Magnetic nanowires are core components for building such devices, and therefore it important to realize flexible magnetic nanowires and uncover magneto-elastic properties, which can propel not only such flexible sensing applications, but can also make new pathways for exploration of flexible magneto-plasmonic devices, and discovering unseen observations at reduced dimensions. Here, we realize ferromagnetic nanowires on flexible substrates for the first time. Through extensive magneto-optical Kerr experiments, exploring the Villari effect in such nanowires, we reveal a two-order of magnitude reduced magnetostrictive constant in nanowires, compared to bulk values. In addition, the nanowires exhibit a remarkably resilient behavior sustaining bending radii ~ 5 mm, very high endurance, and enhanced elastic limit compared to thin films of similar thickness and composition. We confirm the observed performance by micro-magnetic simulations and attribute the observations to the size reduction and high nanostructure-interfacial effects. The flexible magnetic nanowires with ultralow magnetostriction open up new opportunities for stable surface mountable and wearable spintronic sensors, enable a credible way for engineering advanced nanospintronic devices and exploring new effects in hybrid heterostructures.

cond-mat.mes-hall↗

arXiv2020

Fermi velocity renormalization in graphene probed by terahertz time-domain spectroscopy

We demonstrate terahertz time-domain spectroscopy (THz-TDS) to be an accurate, rapid and scalable method to probe the interaction-induced Fermi velocity renormalization νF^* of charge carriers in graphene. This allows the quantitative extraction of all electrical parameters (DC conductivity σDC, carrier density n, and carrier mobility μ) of large-scale graphene films placed on arbitrary substrates via THz-TDS. Particularly relevant are substrates with low relative permittivity (< 5) such as polymeric films, where notable renormalization effects are observed even at relatively large carrier densities (> 10^12 cm-2, Fermi level > 0.1 eV). From an application point of view, the ability to rapidly and non-destructively quantify and map the electrical (σDC, n, μ) and electronic (νF^* ) properties of large-scale graphene on generic substrates is key to utilize this material in applications such as metrology, flexible electronics as well as to monitor graphene transfers using polymers as handling layers.

cond-mat.mes-hall↗

arXiv2019

Unconventional Strain-Dependent Conductance Oscillations in Pristine Phosphorene

Phosphorene is a single elemental two-dimensional semiconductor that has quickly emerged as a high mobility material for transistors and optoelectronic devices. In addition, being a 2D material, it can sustain high levels of strain, enabling sensitive modification of its electronic properties. In this paper, we investigate the strain dependent electrical properties of phosphorene nanocrystals. Performing extensive calculations we determine electrical conductance as a function uniaxial as well as biaxial strain stimulus, and uncover a unique zone phase diagram. This enables us to uncover for the first time conductance oscillations in pristine phopshorene, by simple application of strain. We show that how such unconventional current-voltage behaviour is tuneable by the nature of strain, and how an additional gate voltage can modulate amplitude (peak to valley ratio) of the observed phenomena and its switching efficiency. Furthermore, we show that the switching is highly robust against doping and defects. Our detailed results present new leads for innovations in strain based gauging and high-frequency nanoelectronic switches of phosphorene.

cond-mat.mes-hall↗

arXiv2018

Doping induced site-selective Mott insulating phase in LaFeO$_3$

Tailoring transport properties of strongly correlated electron systems in a controlled fashion counts among the dreams of materials scientists. In copper oxides, varying the carrier concentration is a tool to obtain high-temperature superconducting phases. In manganites, doping results in exotic physics such as insulator-metal transitions (IMT), colossal magnetoresistance (CMR), orbital- or charge-ordered (CO) or charge-disproportionate (CD) states. In most oxides, antiferromagnetic order and charge-disproportionation are asssociated with insulating behavior. Here we report the realization of a unique physical state that can be induced by Mo doping in LaFeO$_3$: the resulting metallic state is a site-selective Mott insulator where itinerant electrons evolving in low-energy Mo states coexist with localized carriers on the Fe sites. In addition, a local breathing-type lattice distortion induces charge disproportionation on the latter, without destroying the antiferromagnetic order. A state, combining antiferromangetism, metallicity and CD phenomena is rather rare in oxides and may be of utmost significance for future antiferromagnetic memory devices.

cond-mat.str-el↗

arXiv2018

Two-dimensional flexible high diffusive spin circuits

Owing to their unprecedented electronic properties, graphene and two-dimensional (2D) crystals have brought fresh opportunities for advances in planar spintronic devices. Graphene is an ideal medium for spin transport while also being an exceptionally resilient material for flexible electronics. However, these extraordinary traits have never been combined to create flexible graphene spin circuits. Realizing such circuits could lead to bendable strain-based spin sensors, a unique platform to explore pure spin current based operations and low power flexible nanoelectronics. Here, we demonstrate graphene spin circuits on flexible substrates for the first time. These circuits, realized using chemical vapour deposited (CVD) graphene, exhibit large spin diffusion coefficients ~0.19-0.24 m2s-1 at room temperature. Compared to conventional devices of graphene on Si/SiO2 substrates, such values are 10-20 times larger and result in a maximum spin diffusion length ~10 um in graphene achieved on such industry standard substrates, showing one order enhanced room temperature non-local spin signals. These devices exhibit state of the art spin diffusion, arising out of a distinct substrate topography that facilitates efficient spin transport, leading to a scalable, high-performance platform towards flexible 2D spintronics. Our innovation unlocks a new domain for the exploration of strain-dependent spin phenomena and paves the way for flexible graphene spin memory-logic units and surface mountable sensors.

cond-mat.mes-hall↗

arXiv2018

Spin-Polarized Tunneling through Chemical Vapor Deposited Multilayer Molybdenum Disulfide

The two-dimensional (2D) semiconductor molybdenum disulfide (MoS2) has attracted widespread attention for its extraordinary electrical, optical, spin and valley related properties. Here, we report on spin polarized tunneling through chemical vapor deposited (CVD) multilayer MoS2 (~7 nm) at room temperature in a vertically fabricated spin-valve device. A tunnel magnetoresistance (TMR) of 0.5 - 2 % has been observed, corresponding to spin polarization of 5 - 10 % in the measured temperature range of 300 - 75 K. First principles calculations for ideal junctions results in a tunnel magnetoresistance up to 8 %, and a spin polarization of 26 %. The detailed measurements at different temperatures and bias voltages, and density functional theory calculations provide information about spin transport mechanisms in vertical multilayer MoS2 spin-valve devices. These findings form a platform for exploring spin functionalities in 2D semiconductors and understanding the basic phenomenon that control their performance.

cond-mat.mtrl-sci↗

arXiv2018

Origin and evolution of surface spin current in topological insulators

The Dirac surface states of topological insulators offer a unique possibility for creating spin polarized charge currents due to the spin-momentum locking. Here we demonstrate that the control over the bulk and surface contribution is crucial to maximize the charge-to-spin conversion efficiency. We observe an enhancement of the spin signal due to surface-dominated spin polarization while freezing out the bulk conductivity in semiconducting Bi1.5Sb0.5Te1.7Se1.3 below 100K. Detailed measurements up to room temperature exhibit a strong reduction of the magnetoresistance signal between 2 and 100K, which we attribute to the thermal excitation of bulk carriers and to the electron-phonon coupling in the surface states. The presence and dominance of this effect up to room temperature is promising for spintronic science and technology.

cond-mat.mtrl-sci↗

arXiv2014

Tunnel Magnetoresistance with Atomically Thin Two-Dimensional Hexagonal Boron Nitride Barriers

The two-dimensional atomically thin insulator hexagonal boron nitride (h-BN) constitutes a new paradigm in tunnel based devices. A large band gap along with its atomically flat nature without dangling bonds or interface trap states makes it an ideal candidate for tunnel spin transport in spintronic devices. Here, we demonstrate the tunneling of spin-polarized electrons through large area monolayer h-BN prepared by chemical vapor deposition in magnetic tunnel junctions. In ferromagnet/h-BN/ferromagnet heterostructures fabricated over a chip scale, we show tunnel magneto resistance at room temperature. Measurements at different bias voltages and on multiple devices with different ferromagnetic electrodes establish the spin polarized tunneling using h-BN barriers. These results open the way for integration of 2D monolayer insulating barriers in active spintronic devices and circuits operating at ambient temperature, and for further exploration of their properties and prospects.

cond-mat.mes-hall↗

arXiv2014

Room Temperature Electrical Detection of Spin Polarized Currents in Topological Insulators

Topological insulators (TIs) are a new class of quantum materials that exhibit spin momentum locking (SML) of massless Dirac fermions in the surface states. Usually optical methods, such as angle and spin-resolved photoemission spectroscopy, have been employed to observe the helical spin polarization in the surface states of three-dimensional (3D) TIs up to room temperatures. Recently, spin polarized surface currents in 3D TIs were detected by electrical methods using ferromagnetic (FM) contacts in a lateral spin-valve measurement geometry. However, probing the spin texture with such electrical approaches is so far limited to temperatures below 125K, which restricts its application potential. Here we demonstrate the room temperature electrical detection of the spin polarization on the surface of Bi$_2$Se$_3$ due to SML by employing spin sensitive FM tunnel contacts. The current-induced spin polarization on the Bi$_2$Se$_3$ surface is probed at room temperature by measuring a spin-valve signal while switching the magnetization direction of the FM detector. The spin signal increases linearly with current bias, reverses sign with current direction, exhibits a weak temperature dependence and decreases with higher TI thickness, as predicted theoretically. Our results demonstrate the electrical detection of the spin polarization on the surface of 3D TIs, which could lead to innovative spin-based quantum information technology at ambient temperatures.

cond-mat.mes-hall↗

arXiv2014

Voltage-controlled inversion of tunnel magnetoresistance in epitaxial Nickel/Graphene/MgO/Cobalt junctions

We report on the fabrication and characterization of vertical spin-valve structures using a thick epitaxial MgO barrier as spacer layer and a graphene-passivated Ni film as bottom ferromagnetic electrode. The devices show robust and scalable tunnel magnetoresistance, with several changes of sign upon varying the applied bias voltage. These findings are explained by a model of phonon-assisted transport mechanisms that relies on the peculiarity of the band structure and spin density of states at the hybrid graphene|Ni interface.

cond-mat.mes-hall↗

arXiv2014

Engineering Schottky Barrier in Black Phosphorus field effect devices for spintronic applications

Black phosphorous (BP) is is recently unveiled as a promising two-dimensional direct bandgap semiconducting material. Here, we report the ambipolar field effect transistor behavior of multilayers of BP with ferromagnetic tunnel contacts. We observe a reduced of Schottky barrier < 50 meV by using TiO${_2}$/Co contacts, which could be further tuned by gate voltages. Eminently a good transistor performance is achieved in BP devices, with drain current modulation on the order of four to six orders of magnitude. The charge carrier mobility is found to be $\sim$ 155 and 0.18 cm${^2}$ V${^{-1}}$ s${^{-1}}$ for holes and electrons respectively at room temperature. Furthermore, magnetoresistance calculations reveal that the resistances of the BP device with applied gate voltages are in the appropriate range for injection and detection of spin polarized holes. Our results demonstrate the prospect of engineering BP nanolayered devices for efficient nanoelectronic and spintronic applications.

cond-mat.mes-hall↗

arXiv2014

Enhanced Tunnel Spin Injection into Graphene using Chemical Vapor Deposited Hexagonal Boron Nitride

The van der Waals heterostructures of two-dimensional (2D) atomic crystals constitute a new paradigm in nanoscience. Hybrid devices of graphene with insulating 2D hexagonal boron nitride (h-BN) have emerged as promising nanoelectronic architectures through demonstrations of ultrahigh electron motilities and charge-based tunnel transistors. Here, we expand the functional horizon of such 2D materials demonstrating the quantum tunneling of spin-polarized electrons through atomic planes of CVD grown h-BN. We report excellent tunneling behavior of h-BN layers together with tunnel spin injection and transport in graphene using ferromagnet/h-BN contacts. Employing h-BN tunnel contacts, we observe enhancements in both spin signal amplitude and lifetime by an order of magnitude. We demonstrate spin transport and precession over micrometer-scale distances with spin lifetime up to 0.46 nanosecond. Our results and complementary magnetoresistance calculations illustrate that CVD h-BN tunnel barrier provides a reliable, reproducible and alternative approach to address the conductivity mismatch problem for spin injection into graphene.

cond-mat.mes-hall↗

arXiv2012

Electrical transport properties of nanostructured ferromagnetic perovskite oxides La_0.67Ca_0.33MnO_3 and La_0.5Sr_0.5CoO_3 at low temperatures (5 K > T >0.3 K) and high magnetic field

We report a comprehensive study of the electrical and magneto-transport properties of nanocrystals of La_0.67Ca_0.33MnO_3 (LCMO) (with size down to 15 nm) and La_0.5Sr_0.5CoO_3 (LSCO) (with size down to 35 nm) in the temperature range 0.3 K to 5 K and magnetic fields upto 14 T. The transport, magnetotransport and non-linear conduction (I-V curves) were analysed using the concept of Spin Polarized Tunnelling in the presence of Coulomb blockade. The activation energy of transport, Δ, was used to estimate the tunnelling distances and the inverse decay length of the tunnelling wave function (χ) and the height of the tunnelling barrier (Φ_B). The magnetotransport data were used to find out the magnetic field dependences of these tunnelling parameters. The data taken over a large magnetic field range allowed us to separate out the MR contributions at low temperatures arising from tunnelling into two distinct contributions. In LCMO, at low magnetic field, the transport and the MR are dominated by the spin polarization, while at higher magnetic field the MR arises from the lowering of the tunnel barrier by the magnetic field leading to an MR that does not saturate even at 14 T. In contrast, in LSCO, which does not have substantial spin polarization, the first contribution at low field is absent, while the second contribution related to the barrier height persists. The idea of inter-grain tunnelling has been validated by direct measurements of the non-linear I-V data in this temperature range and the I-V data was found to be strongly dependent on magnetic field. We made the important observation that a gap like feature (with magnitude ~ E_C, the Coulomb charging energy) shows up in the conductance g(V) at low bias for the systems with smallest nanocrystal size at lowest temperatures (T < 0.7 K). The gap closes as the magnetic field and the temperature are increased.

cond-mat.mes-hall↗

arXiv2011

Synthesis, Characterization and Investigation of Electrical Transport in Metal Nanowires and Nanotubes

This thesis is dedicated to the synthesis, characterization and the study of electrical transport through metal nanowires and nanotubes. The metal nanowires(Ni, Cu) and nanotubes(Cu) are synthesised by electrochemical deposition in nanoporous templates. In the synthesis front, electrochemical deposition schemes were developed to achieve single crystallinity and synthesis of tubular nanostructures. The nanostructures are characterized using structural characterization techniques such as X-ray diffraction, Scanning electron microscopy and Transmission electron microscopy. The magnetic nanowires are also characterized using VSM and SQUID magnetometers. The electrical transport measurements performed in a wide range of temperature (3K-700K) to understand the interactions of electrons with phonon, magnon and surface when the electron mean free path is limited by the dimension of these nanostructures. The measurements were performed in the wide range of temperature to encompass and study the ferromagnetic to paramagnetic phase transition in case of magnetic nanowires. We observed systematic scaling of these interactions and the characteristic temperatures such as the Debye temperature(θ_R) and Curie temperature(T_C) as a function of diameter. We also observed how these interactions change as we move from nanowires to nanotubes of metals.

cond-mat.mes-hall↗