arXiv subjects

M. White

Publications and source records attributed to M. White.

At least 37 records · Page 2Linked to original sources

arXiv2023

Nitrogen Precooling Heat Exchanger replacement and control system upgrade in Superfluid Cryoplant at CMTF

Liquid Nitrogen precooling is used in most Cryoplants to achieve cooldown to 80 K temperature range. In one such system at Fermilab's CMTF Superfluid Cryoplant, where the Helium supply directly exchanges heat with liquid Nitrogen, freezing of Nitrogen occurred inside the heat exchanger due to heat exchanger imbalance during a Cryoplant trip. Trapped vapor pockets of N2 within the frozen heat exchanger channels were formed while warming up the heat exchanger, creating high localized pressure and subsequent damage/rupture of the heat exchanger. Replacement of the heat exchanger was done, and modifications were made in the system to rectify future occurrences. The control system was updated to bypass the heat exchanger entirely if the incoming Helium stream temperature drops below 76 K. This was done by repurposing two control valves as heat exchanger bypass valves that were previously used for a redundant 80 K adsorber in the coldbox. Additional modifications were made to further prevent return of large amount of cold Helium gas from cold end during abrupt Cryoplant shutdown. This modification has ensured high reliability of heat exchanger with prevention of freezing of Nitrogen which can damage the heat exchanger.

physics.ins-det↗

arXiv2023

Conservation of Helium while Maintaining High System Purity

Recent helium shortages and helium price increases have lead to an increased emphasis being placed on conserving helium. The need to conserve helium must be balanced with need to maintain the high levels of purity necessary to prevent operational problems caused by contamination. Helium losses and contamination control are especially important for test stands that have cryogenic distribution systems operating continuously with frequent changeover of cryogenic temperature components that are being tested. This paper describes a mathematical model to estimate the quantity of helium lost and the purity of the helium after the pump and backfill procedure is complete. The process to determine the optimal time during pump down to cut off pumping and start backfilling is described. There is a tradeoff between trying to achieve the lowest possible pressure during pumping and the quantity of air leaking into the volume while pumping is occurring. An additional benefit of careful selection of pump and backfill parameters in conjunction with real-time pressure monitoring can reduce the labor and time required to complete a successful pump and backfill procedure. This paper is intended to be a tool for engineers to review their pump and backfill procedures and measured data to optimize helium losses, system purity, and labor required.

physics.ins-det↗

arXiv2022

Report of the Topical Group on Higgs Physics for Snowmass 2021: The Case for Precision Higgs Physics

A future Higgs Factory will provide improved precision on measurements of Higgs couplings beyond those obtained by the LHC, and will enable a broad range of investigations across the fields of fundamental physics, including the mechanism of electroweak symmetry breaking, the origin of the masses and mixing of fundamental particles, the predominance of matter over antimatter, and the nature of dark matter. Future colliders will measure Higgs couplings to a few per cent, giving a window to beyond the Standard Model (BSM) physics in the 1-10 TeV range. In addition, they will make precise measurements of the Higgs width, and characterize the Higgs self-coupling. This report details the work of the EF01 and EF02 working groups for the Snowmass 2021 study.

hep-ph↗

arXiv2022

Consistent lensing and clustering in a low-$S_8$ Universe with BOSS, DES Year 3, HSC Year 1 and KiDS-1000

We evaluate the consistency between lensing and clustering probes of large-scale structure based on measurements of projected galaxy clustering from BOSS combined with overlapping galaxy-galaxy lensing from three surveys: DES Y3, HSC Y1, and KiDS-1000. An intra-lensing-survey study finds good agreement between these lensing data. We model the observations using the Dark Emulator and fit the data at two fixed cosmologies: Planck, with $S_8=0.83$, and a Lensing cosmology with $S_8=0.76$. For a joint analysis limited to scales with $R>5.25h^{-1}$Mpc, we find that both cosmologies provide an acceptable fit to the data. Full utilisation of the small-scale clustering and lensing measurements is hindered by uncertainty in the impact of baryon feedback and assembly bias, which we account for with a reasoned theoretical error budget. We incorporate a systematic scaling parameter for each redshift bin, $A$, that decouples the lensing and clustering to capture any inconsistency. When a wide range of scales ($0.15<R<60h^{-1}$Mpc) are incorporated, we find different results for the consistency of clustering and lensing between the two cosmologies. Limiting the analysis to the bins for which the impact of the selection of the lens sample is expected to be minimal, for the low-$S_8$ Lensing cosmology, the measurements are consistent with $A$=1; $A=0.91\pm0.04$ using DES+KiDS and $A=0.97\pm0.06$ using HSC. For the Planck cosmology case, we find a discrepancy: $A=0.79\pm0.03$ using DES+KiDS and $A=0.84\pm0.05$ using HSC. We demonstrate that a kSZ-based estimate for baryonic effects alleviates some of the discrepancy in the Planck cosmology. This analysis demonstrates the statistical power of these small-scale measurements, but also indicates that caution is still warranted given current uncertainties in modelling baryonic effects, assembly bias, and selection effects in the foreground sample.

astro-ph.CO↗

arXiv2022

Fabrication and installation of the Mu2e cryogenic distribution system

The muon-to-electron conversion (Mu2e) experiment at Fermilab will be used to search for the charged lepton flavor-violating conversion of muons to electrons in the field of an atomic nucleus. The Mu2e experiment is currently in the construction stage. The scope of this paper is the cryogenic distribution system and superconducting power leads for four superconducting solenoid magnets: Production Solenoid (PS), an Upstream and Downstream Transport Solenoids (TSu and TSd) and Detector Solenoid (DS). The design of the cryogenic distribution system and the fabrication of several sub-systems was reported previously. This paper reports on additional fabrication and installation progress that has been performed over the past two years. Lessons learned during fabrication and testing of the cryogenic distribution system components are described. In particular, the challenges and solutions implemented for aluminum welding are reported. A description of the process used to qualify the welding procedure and welders for welding the aluminium stabilized NbTi superconducting power leads is provided. Additionally, the progress made with regards to installing the power leads into the cryogenic Feedboxes is covered.

physics.acc-ph↗

arXiv2021

A model-independent analysis of $b \to s μ^+ μ^-$ transitions with GAMBIT's FlavBit

The search for flavour-changing neutral current effects in $B$-meson decays is a powerful probe of physics beyond the Standard Model. Deviations from SM behaviour are often quantified by extracting the preferred values of the Wilson coefficients of an operator product expansion. We use the FlavBit module of the GAMBIT package to perform a simultaneous global fit of the Wilson coefficients $C_7$, $C_9$, and $C_{10}$ using a combination of all current data on $b \to s μ^+ μ^-$ transitions. We further extend previous analyses by accounting for the correlated theoretical uncertainties at each point in the Wilson coefficient parameter space, rather than deriving the uncertainties from a Standard Model calculation. We find that the best fit deviates from the SM value with a significance of 6.6$σ$. The largest deviation is associated with a vector coupling of muons to $b$ and $s$ quarks.

hep-ph↗

arXiv2021

The Dark Machines Anomaly Score Challenge: Benchmark Data and Model Independent Event Classification for the Large Hadron Collider

We describe the outcome of a data challenge conducted as part of the Dark Machines Initiative and the Les Houches 2019 workshop on Physics at TeV colliders. The challenged aims at detecting signals of new physics at the LHC using unsupervised machine learning algorithms. First, we propose how an anomaly score could be implemented to define model-independent signal regions in LHC searches. We define and describe a large benchmark dataset, consisting of >1 Billion simulated LHC events corresponding to $10~\rm{fb}^{-1}$ of proton-proton collisions at a center-of-mass energy of 13 TeV. We then review a wide range of anomaly detection and density estimation algorithms, developed in the context of the data challenge, and we measure their performance in a set of realistic analysis environments. We draw a number of useful conclusions that will aid the development of unsupervised new physics searches during the third run of the LHC, and provide our benchmark dataset for future studies at https://www.phenoMLdata.org. Code to reproduce the analysis is provided at https://github.com/bostdiek/DarkMachines-UnsupervisedChallenge.

hep-ph↗

arXiv2021

LCLS-II-HE verification cryomodule high gradient performance and quench behavior

An 8-cavity, 1.3 GHz, LCLS-II-HE cryomodule was assembled and tested at Fermilab to verify performance before the start of production. Its cavities were processed with a novel nitrogen doping treatment to improve gradient performance. The cryomodule was tested with a modified protocol to process sporadic quenches, which were observed in LCLS-II production cryomodules and are attributed to multipacting. Dedicated vertical test experiments support the attribution to multipacting. The verification cryomodule achieved an acceleration voltage of 200 MV in continuous wave mode, corresponding to an average accelerating gradient of 24.1 MV/m, significantly exceeding the specification of 173 MV. The average Q0 (3.0x10^10) also exceeded its specification (2.7x10^10). After processing, no field emission was observed up to the maximum gradient of each cavity. This paper reviews the cryomodule performance and discusses operational issues and mitigations implemented during the several month program.

physics.acc-ph↗

arXiv2020

Les Houches 2019 Physics at TeV Colliders: New Physics Working Group Report

This report presents the activities of the `New Physics' working group for the `Physics at TeV Colliders' workshop (Les Houches, France, 10--28 June, 2019). These activities include studies of direct searches for new physics, approaches to exploit published data to constrain new physics, as well as the development of tools to further facilitate these investigations. Benefits of machine learning for both the search for new physics and the interpretation of these searches are also presented.

hep-ph↗

arXiv2019

IRDFF-II: A New Neutron Metrology Library

High quality nuclear data is the most fundamental underpinning for all neutron metrology applications. This paper describes the release of version II of the International Reactor Dosimetry and Fusion File (IRDFF-II) that contains a consistent set of nuclear data for fission and fusion neutron metrology applications up to 60~MeV neutron energy. The library is intended to support: a) applications in research reactors; b) safety and regulatory applications in the nuclear power generation in commercial fission reactors; and c) material damage studies in support of the research and development of advanced fusion concepts. The paper describes the contents of the library, documents the thorough verification process used in its preparation, and provides an extensive set of validation data gathered from a wide range of neutron benchmark fields. The new \mbox{IRDFF-II} library includes 119 metrology reactions, four cover material reactions to support self-shielding corrections, five metrology metrics used by the dosimetry community, and cumulative fission products yields for seven fission products in three different neutron energy regions. In support of characterizing the measurement of the residual nuclei from the dosimetry reactions and the fission product decay modes, the present document lists the recommended decay data, particle emission energies and probabilities for 68 activation products. It also includes neutron spectral characterization data for 29 neutron benchmark fields for the validation of the library contents. The IRDFF-II library and comprehensive documentation is available online at https://www-nds.iaea.org/IRDFF/. Evaluated cross sections can be compared with experimental data and other evaluations at https://www-nds.iaea.org/exfor/endf.htm. The new library is expected to become the international reference in neutron metrology for multiple applications.

nucl-th↗

arXiv2019

FOBOS: A Next-Generation Spectroscopic Facility at the W. M. Keck Observatory

High-multiplex and deep spectroscopic follow-up of upcoming panoramic deep-imaging surveys like LSST, Euclid, and WFIRST is a widely recognized and increasingly urgent necessity. No current or planned facility at a U.S. observatory meets the sensitivity, multiplex, and rapid-response time needed to exploit these future datasets. FOBOS, the Fiber-Optic Broadband Optical Spectrograph, is a near-term fiber-based facility that addresses these spectroscopic needs by optimizing depth over area and exploiting the aperture advantage of the existing 10m Keck II Telescope. The result is an instrument with a uniquely blue-sensitive wavelength range (0.31-1.0 um) at R~3500, high-multiplex (1800 fibers), and a factor 1.7 greater survey speed and order-of-magnitude greater sampling density than Subaru's Prime Focus Spectrograph (PFS). In the era of panoramic deep imaging, FOBOS will excel at building the deep, spectroscopic reference data sets needed to interpret vast imaging data. At the same time, its flexible focal plane, including a mode with 25 deployable integral-field units (IFUs) across a 20 arcmin diameter field, enables an expansive range of scientific investigations. Its key programmatic areas include (1) nested stellar-parameter training sets that enable studies of the Milky Way and M31 halo sub-structure, as well as local group dwarf galaxies, (2) a comprehensive picture of galaxy formation thanks to detailed mapping of the baryonic environment at z~2 and statistical linking of evolving populations to the present day, and (3) dramatic enhancements in cosmological constraints via precise photometric redshifts and determined redshift distributions. In combination with Keck I instrumentation, FOBOS also provides instant access to medium-resolution spectroscopy for transient sources with full coverage from the UV to the K-band.

astro-ph.IM↗

arXiv2019

Testing Gravity Using Type Ia Supernovae Discovered by Next-Generation Wide-Field Imaging Surveys

In the upcoming decade cadenced wide-field imaging surveys will increase the number of identified $z<0.3$ Type~Ia supernovae (SNe~Ia) from the hundreds to the hundreds of thousands. The increase in the number density and solid-angle coverage of SNe~Ia, in parallel with improvements in the standardization of their absolute magnitudes, now make them competitive probes of the growth of structure and hence of gravity. The peculiar velocity power spectrum is sensitive to the growth index $γ$, which captures the effect of gravity on the linear growth of structure through the relation $f=Ω_M^γ$. We present the first projections for the precision in $γ$ for a range of realistic SN peculiar-velocity survey scenarios. In the next decade the peculiar velocities of SNe~Ia in the local $z<0.3$ Universe will provide a measure of $γ$ to $\pm 0.01$ precision that can definitively distinguish between General Relativity and leading models of alternative gravity.

astro-ph.CO↗

arXiv2018

Commissioning And First Results From The Fermilab Cryomodule Test Stand

A new test stand dedicated to Superconducting Radiofrequency (SRF) cryomodule testing, CMTS1, has been commissioned and is now in operation at Fermilab. The first device to be cooled down and powered in this facility is the prototype 1.3 GHz cryomodule assembled at Fermilab for LCLS-II. We describe the demonstrated capabilities of CMTS1, report on steps taken during commissioning, provide an overview of first test results, and survey future plans.

physics.acc-ph↗

arXiv2014

Excitation of Giant Monopole Resonance in $^{208}$Pb and $^{116}$Sn Using Inelastic Deuteron Scattering

The excitation of the isoscalar giant monopole resonance (ISGMR) in $^{116}$Sn and $^{208}$Pb has been investigated using small-angle (including $0^\circ$) inelastic scattering of 100 MeV/u deuteron and multipole-decomposition analysis (MDA). The extracted strength distributions agree well with those from inelastic scattering of 100 MeV/u $α$ particles. These measurements establish deuteron inelastic scattering at E$_d \sim$ 100 MeV/u as a suitable probe for extraction of the ISGMR strength with MDA, making feasible the investigation of this resonance in radioactive isotopes in inverse kinematics.

nucl-ex↗

arXiv2014

Development of position-sensitive time-of-flight spectrometer for fission fragment research

A position-sensitive, high-resolution time-of-flight detector for fission fragments has been developed. The SPectrometer for Ion DEterminiation in fission Research (SPIDER) is a $2E-2v$ spectrometer designed to measure the mass of light fission fragments to a single mass unit. The time pick-off detector pairs to be used in SPIDER have been tested with $α$-particles from $^{229}$Th and its decay chain and $α$-particles and spontaneous fission fragments from $^{252}$Cf. Each detector module is comprised of a thin electron conversion foil, electrostatic mirror, microchannel plates, and delay-line anodes. Particle trajectories on the order of 700 mm are determined accurately to within 0.7 mm. Flight times on the order of 70 ns were measured with 200 ps resolution FWHM. Computed particle velocities are accurate to within 0.06 mm/ns corresponding to precision of 0.5%. An ionization chamber capable of 400 keV energy resolution coupled with the velocity measurements described here will pave the way for modestly efficient measurements of light fission fragments with unit mass resolution.

physics.ins-det↗

arXiv2013

Luminosity Function from dedicated SDSS-III and MMT data of quasars in 0.7<z<4.0 selected with a new approach

We present a measurement of the quasar luminosity function in the range 0.68 2.15. Using pure luminosity evolution models, we fitted our LF measurements, and predicted quasar number counts as a function of redshift and observed magnitude. These predictions are useful inputs for future cosmology surveys such as those relying on the observation of quasars to measure baryon acoustic oscillations.

astro-ph.CO↗

arXiv2012

Fermilab SRF cryomodule operational experience

Fermi National Accelerator Laboratory is constructing an Advanced Accelerator Research and Development facility at New Muon Lab. The cryogenic infrastructure in support of the initial phase of the facility consists of two Tevatron style standalone refrigerators, cryogenic distribution system as well as an ambient temperature pumping system to achieve 2 K operations with supporting purification systems. During this phase of the project a single Type III plus 1.3 GHz cryomodule was installed, cooled and tested. Design constraints of the cryomodule required that the cryomodule individual circuits be cooled at predetermined rates. These constraints required special design solutions to achieve. This paper describes the initial cooldown and operational experience of a 1.3 GHz cryomodule using the New Muon Lab cryogenic system.

physics.acc-ph↗

arXiv2011

Self consistent, absolute calibration technique for photon number resolving detectors

Well characterized photon number resolving detectors are a requirement for many applications ranging from quantum information and quantum metrology to the foundations of quantum mechanics. This prompts the necessity for reliable calibration techniques at the single photon level. In this paper we propose an innovative absolute calibration technique for photon number resolving detectors, using a pulsed heralded photon source based on parametric down conversion. The technique, being absolute, does not require reference standards and is independent upon the performances of the heralding detector. The method provides the results of quantum efficiency for the heralded detector as a function of detected photon numbers. Furthermore, we prove its validity by performing the calibration of a Transition Edge Sensor based detector, a real photon number resolving detector that has recently demonstrated its effectiveness in various quantum information protocols.

quant-ph↗