arXiv subjects

M. Zehetmayer

Publications and source records attributed to M. Zehetmayer.

16 recordsLinked to original sources

arXiv2015

How the vortex lattice of a superconductor becomes disordered: a study by scanning tunneling spectroscopy

Order-disorder transitions take place in many physical systems, but observing them in detail in real materials is difficult. In two- or quasi-two-dimensional systems, the transition has been studied by computer simulations and experimentally in electron sheets, dusty plasmas, colloidal and other systems. Here I show the different stages of defect formation in the vortex lattice of a superconductor while it undergoes an order-disorder transition by presenting real-space images of the lattice from scanning tunneling spectroscopy. When the system evolves from the ordered to the disordered state, the predominant kind of defect changes from dislocation pairs to single dislocations, and finally to defect clusters forming grain boundaries. Correlation functions indicate a hexatic-like state preceding the disordered state. The transition in the microscopic vortex distribution is mirrored by the well-known spectacular second peak effect observed in the macroscopic current density of the superconductor.

cond-mat.supr-con↗

arXiv2014

A review of two-band superconductivity: materials and effects on the thermodynamic and reversible mixed-state properties

Two-band superconductivity has become an important topic over the last ten years. Extensive experimental and theoretical studies started with MgB2 and are now focused on the iron-based and other new superconductors. In this review, I describe how important thermodynamic, reversible mixed-state, and other superconducting properties are changed by two-band and, for comparison, by other effects such as anisotropy in a single-band material or an energy gap structure different from the conventional s-wave symmetry. The work consists of three main parts, in which I review (i) theoretical models and what they predict for experimentally accessible properties in the two-band and other scenarios, (ii) experimental methods applied for investigating superconducting properties and the results obtained in potential two-band materials, and (iii) materials, for which two- or multi-band superconductivity has been suggested. It is shown that two-band effects appear in most of the analyzed properties and that they can be quite significant but usually fade away as interband interactions increase. Anisotropy often leads to similar modifications in single-band superconductors, which is why the distinction of two-band and anisotropy effects is usually difficult, particularly when the temperature dependence of the quantities is examined. In contrast, the field dependent effects are more often different and thus more often allow a reliable distinction between the models.

cond-mat.supr-con↗

arXiv2013

Testing V3Si for two-band superconductivity

Is V3Si a two-band or a single-band superconductor? Everyone who searches the literature for this question will find conflicting answers, for V3Si was claimed to be a perfect example of two-band and claimed to be a perfect example of single-band superconductivity. In this article we intend to clarify the situation by presenting new experimental facts acquired from the magnetic properties of a V3Si single crystal. We probe for field dependent two-band effects by analyzing the reversible magnetization at different temperatures, and we probe for temperature dependent two-band effects by analyzing the superfluid density obtained by two different methods at different magnetic fields. All our results are reliably described within the single-band models and thus support the single-band scenario for V3Si but do not completely rule out the presence of a very small second gap.

cond-mat.supr-con↗

arXiv2013

Critical current anisotropy in Nd-1111 single crystals and the infuence of neutron irradiation

We report on angle-resolved magnetization measurements on NdFeAsO$_{0.65}$F$_{0.35}$ (Nd-1111) single crystals. The field dependence of the critical current density, $J_c$, is non-monotonous in these crystals at all orientations and temperatures due to the fishtail effect, which strongly influences the angular dependence of $J_c$. The currents decrease as the field is tilted from the crystallographic c-axis at low fields, but increase at high fields. A peak occurs in the angular dependence of $J_c$ at intermediate fields. The critical currents are significantly enhanced after irradiation with fast neutrons and the fishtail disappears. The different current anisotropies at low and high fields, however, persist. We discuss the data in the framework of the anisotropic scaling approach and propose a transition from dominant pinning by large defects of low density at low fields to pinning by small defects of high density at high fields in the pristine crystal. Strong pinning dominates at all fields after the irradiation, and the angular dependence of $J_c$ can be described by anisotropic scaling only after an appropriate extension to this pinning regime.

cond-mat.supr-con↗

arXiv2010

Evidence for a temperature dependent anisotropy of the superconducting state parameters in underdoped SmBa2Cu3Ox

The temperature dependence of the anisotropy of the superconducting state parameters, γ, was studied by torque magnetometry for the high temperature superconductor SmBa2Cu3Ox in magnetic fields of up to 9 T. The measurements were performed on four underdoped single crystals with oxygen contents corresponding to Tc's varying from 42.8 to 63.6 K. The anisotropy was found to be strongly temperature dependent, while only a weak dependence on the magnetic field was observed. No evidence for a field dependent superfluid density was found. Possible origins of the temperature dependence of the anisotropy are discussed.

cond-mat.supr-con↗

arXiv2010

Experimental evidence for a two-band superconducting state of NbSe2 single crystals

We report on measurements and a detailed analysis of the reversible magnetization of superconducting NbSe2 single crystals. By comparing the experimental data with Ginzburg Landau theory we show that superconductivity in NbSe2 cannot be explained by an anisotropic single-band, but by a multi-band scenario. Applying a simple two-band model reveals the basic mixed-state parameters, which are quite different in the two bands. We identify a strongly anisotropic band that determines the properties at high magnetic fields, and a second almost isotropic band that dominates at low fields. Our method is well suited for distinguishing anisotropic single-band from multi-band superconductivity in various materials.

cond-mat.supr-con↗

arXiv2010

Anisotropy of the superconducting state parameters and intrinsic pinning in low-level Pr-doped YBa2Cu3O(7-delta) single crystals

The influence of low-level Pr substitution in Y1-xPrxBa2Cu3O(7-delta) single crystals on the anisotropy of the superconducting state parameters was investigated by torque magnetometry in magnetic fields of up to 9 T. An averaged anisotropy parameter, γ, of 7.4 was found and no influence of the Pr ion concentration on γwas observed up to a Pr content of 2.4%. A pronounced maximum at angles between 0.5 and 1 degree out of the ab-plane was observed in all crystals in the irreversible angular dependence of the torque. This maximum is attributed to intrinsic pinning associated with kinked vortices. The variation of the irreversible torque with the substitution level indicates the influence of the Pr content on pinning within the CuO2 planes, even though the anisotropy of the superconducting state parameters is not affected.

cond-mat.supr-con↗

arXiv2010

Disorder effects and current percolation in FeAs based superconductors

We report the influence of atomic disorder introduced by sequential neutron irradiation on the basic superconducting properties, flux pinning and grain connectivity. Two different polycrystalline Sm-1111 samples (SmFeAsO_{1-x}F_x) and two Ba-122 single crystals (BaFe_{1.8}Co_{0.2}As_2) were investigated. The monotonous decrease of the transition temperature with neutron fluence degrades the upper critical field, at least in the investigated temperature region. Pinning on the other hand is largely improved, with a different optimal defect concentration (fluence) in the two materials. The analysis of the current flow in the polycrystalline samples reveals weak link behaviour in the majority of grain connections and the existence of stronger grain connections. The density of the latter seems to be close to the percolation threshold (i.e. the minimum fraction for a continuous current path). Both types of connections are sensitive to disorder and degrade upon neutron irradiation.

cond-mat.supr-con↗

arXiv2009

Disorder Induced Effects on the Critical Current Density of Iron Pnictide BaFe_1.8 Co_0.2 As_2 single crystals

Investigating the role of disorder in superconductors is an essential part of characterizing the fundamental superconducting properties as well as assessing potential applications of the material. In most cases, the information available on the defect matrix is poor, making such studies difficult, but the situation can be improved by introducing defects in a controlled way, as provided by neutron irradiation. In this work, we analyze the effects of neutron irradiation on a Ba(Fe$_{1-x}$Co$_x$)$_2$As$_2$ single crystal. We mainly concentrate on the magnetic properties which were determined by magnetometry. Introducing disorder by neutron irradiation leads to significant effects on both the reversible and the irreversible magnetic properties, such as the transition temperature, the upper critical field, the anisotropy, and the critical current density. The results are discussed in detail by comparing them with the properties in the unirradiated state.

cond-mat.supr-con↗

arXiv2009

Simulation of the current dynamics in superconductors: Application to magnetometry measurements

A simple model for simulating the current dynamics and the magnetic properties of superconductors is presented. Short simulation times are achieved by solving the differential form of Maxwell's equations inside the sample, whereas integration is only required at the surface to meet the exact boundary conditions. The procedure reveals the time and position dependence of the current density and the magnetic induction (B) making it very convenient to apply field dependent material parameters for the simulation of magnetization loops, relaxation measurements, etc. Two examples, which are important for standard magnetometry experiments, are discussed. Firstly, we prove that evaluating the critical current density (J_c) from experiment by applying Bean's model reveals almost the exact J_c(B) behavior, if the evaluation is corrected by a simple numerical expression. Secondly, we show that the superconducting volume fraction of a sample can be directly determined from magnetization loops by carefully comparing experiment and simulation in the field range, where the current loops are differently oriented within the sample.

cond-mat.supr-con↗

arXiv2009

Disorder effects on the superconducting properties of BaFe$_{1.8}$Co$_{0.2}$As$_2$ single crystals

Single crystals of superconducting BaFe$_{1.8}$Co$_{0.2}$As$_2$ were exposed to neutron irradiation in a fission reactor. The introduced defects decrease the superconducting transition temperature (by about 0.3 K) and the upper critical field anisotropy (e.g. from 2.8 to 2.5 at 22 K) and enhance the critical current densities by a factor of up to about 3. These changes are discussed in the context of similar experiments on other superconducting materials.

cond-mat.supr-con↗

arXiv2008

Assessing the spatial and field dependence of the critical current density in YBCO bulk superconductors by scanning Hall probes

Although the flux density map of a bulk superconductor provides in principle sufficient information for calculating the magnitude and the direction of the supercurrent flow, the inversion of the Biot-Savart law is ill conditioned for thick samples, thus rendering this method unsuitable for state of the art bulk superconductors. If a thin (< 1 mm) slab is cut from the bulk, the inversion is reasonably well conditioned and the variation of the critical current density in the sample can be calculated with adequate spatial resolution. Therefore a novel procedure is employed, which exploits the symmetry of the problem and solves the equations non-iteratively, assuming a planar z-independent current density. The calculated current density at a certain position is found to depend on the magnetic induction. In this way the average field dependence of the critical current density Jc(B) is obtained also at low fields, which is not accessible to magnetisation measurements due to the self-field of the sample. It is further shown that an evaluation of magnetisation loops, taking the self-field into account, results in a similar dependence in the field range accessible to this experiment.

cond-mat.supr-con↗

arXiv2008

Connectivity and Critical Currents in Polycrystalline MgB2

Current transport in polycrystalline magnesium diboride is highly non-uniform (percolative) due to the presence of secondary phases and also due to the intrinsic anisotropy of the material. The influence of secondary phases on the transport properties of MgB2 was investigated. Bulk samples were prepared from a mixture of MgB2 and MgO powders by the ex-situ technique in order to vary the MgO content systematically. The samples were characterized by resistive and magnetization measurements. The reduced MgB2 fraction is modeled by a reduced effective cross section (connectivity), which was assessed directly by the experiments. The presence of MgO also increases the percolation threshold, which reduces the zero resistivity (or irreversibility) field.

cond-mat.supr-con↗

arXiv2003

Current percolation and anisotropy in polycrystalline MgB$_2$

The influence of anisotropy on the transport current in MgB$_2$ polycrystalline bulk samples and wires is discussed. A model for the critical current density is proposed, which is based on anisotropic London theory, grain boundary pinning and percolation theory. The calculated currents agree convincingly with experimental data and the fit parameters, especially the anisotropy, obtained from percolation theory agree with experiment or theoretical predictions.

cond-mat.supr-con↗

arXiv2002

Mixed state properties of superconducting MgB2 single crystals

We report on measurements of the magnetic moment in superconducting MgB2 single crystals. We find μ_0H_{c2}^c(0) = 3.2 T, μ_0H_{c2}^{ab}(0) = 14.5 T, γ= 4.6, μ_0H_c(0) = 0.28 T, and κ(T_c) = 4.7. The standard Ginzburg-Landau and London model relations lead to a consistent data set and indicate that MgB2 is a clean limit superconductor of intermediate coupling strength with very pronounced anisotropy effects.

cond-mat.supr-con↗

arXiv2001

Neutron Irradiation of MgB2 Bulk Superconductors

Sintered samples of MgB2 were irradiated in a fission reactor. Defects in the bulk microstructure are produced during this process mainly by the 10B(n,a)7Li reaction while collisions of fast neutrons with the lattice atoms induce much less damage. Self-shielding effects turn out to be very important and lead to a highly inhomogeneous defect distribution in the irradiated samples. The resulting disorder enhances the normal state resistivity and the upper critical field. The irreversibility line shifts to higher fields at low temperatures and the measured critical current densities increase following irradiation.

cond-mat.supr-con↗