arXiv subjects

Maciej P. Polak

Publications and source records attributed to Maciej P. Polak.

15 recordsLinked to original sources

arXiv2026

Thermal Transport in SiC with Intrinsic Defects and Mg Transmutation Products

Silicon carbide is a leading candidate material for advanced nuclear energy systems, but irradiation-induced defects and transmutation products can severely degrade its thermal conductivity. In fusion environments, Mg is predicted to be a major solid transmutant in SiC, yet it is not well understood how different Mg-related defects affect phonon transport. Here, we develop a machine-learning interatomic potential, MLIP4SiC-Mg, for 3C-SiC containing intrinsic point defects, Mg-related defects, and Mg-defect complexes. The potential is trained on a large DFT dataset and reproduces DFT energies, forces, equation-of-state behavior, phonon dispersions, and lattice thermal conductivities with near-DFT accuracy. Combined with Green-Kubo molecular dynamics, force-error correction, and a resistance-based treatment for dilute defective systems, MLIP4SiC-Mg enables quantitative thermal-conductivity calculations in large defective supercells. The corrected thermal conductivity of pristine 3C-SiC is 421 W/(mK) at 300 K, in good agreement with available experimental data. All defects considered strongly reduce thermal conductivity, but their scattering strengths are highly configuration dependent. V_C and Mg_TC act as strong phonon scatterers, whereas isolated Mg_Si is comparatively weak. Residual thermal resistivity analysis shows that defect-induced thermal resistance is not strictly linear with concentration and should be treated as an effective temperature- and concentration-dependent scattering metric. Mg_Si-V_C clustering enhances scattering relative to isolated Mg_Si, but reduces the total excess resistance relative to spatially separated Mg_Si and V_C defects. These results clarify the configuration-dependent role of Mg transmutation in irradiation-degraded SiC and provide an atomistic framework for quantifying defect-controlled heat transport in nuclear ceramics.

cond-mat.mtrl-sci↗

arXiv2026

Improving Combined Detection and Classification of TEM Defects via Mask-Conditioned Latent Diffusion Augmentation

Analyzing microstructural defects in transmission electron microscopy (TEM) images, particularly in irradiated metal alloys, is often limited by the availability of high-quality, labeled data. To address this, we introduce a generative data augmentation approach using a mask-conditioned latent diffusion model (LDM) for synthesizing realistic TEM images with controllable, automatically labeled multi-class defect masks. Without requiring manual annotations for generation, our method enables the creation of synthetic image-mask pairs by sampling distributions learned from experimental masks. These generated data were used to augment small experimental datasets of varying sizes (10, 50, and 100 labeled experimental images) to train a Mask Regional Convolutional Neural Network (R-CNN) model for defect detection and classification. Our results show that generative augmentation yields small overall model performance improvements, with up to a 0.02 gain in the harmonic mean of detection and classification F1 scores. However, we also find that the relative contributions to detection and classification improvement depend on the specific train/test data split. These findings highlight the potential of targeted generative models to enhance deep learning performance in data-scarce microscopy-based image quantification tasks.

cs.CV↗

arXiv2026

Regression with Large Language Models for Materials and Molecular Property Prediction

We demonstrate the ability of large language models (LLMs) to perform material and molecular property regression tasks, a significant deviation from the conventional LLM use case. We benchmark the Large Language Model Meta AI (LLaMA) 3 on several molecular properties in the QM9 dataset and 28 materials properties. Only composition-based input strings are used as the model input and we fine tune on only the generative loss. We broadly find that LLaMA 3, when fine-tuned using the SMILES representation of molecules, provides useful regression results which can rival standard materials property prediction models like random forest or fully connected neural networks on the QM9 dataset. Not surprisingly, LLaMA 3 errors are 5-10x higher than those of the state-of-the-art models that were trained using far more granular representation of molecules (e.g., atom types and their coordinates) for the same task. Similarly, LLaMA 3 provides comparable, although slightly worse, accuracy relative to random forest and elemental descriptors when using just compound chemical description on our set of 28 materials properties. Interestingly, LLaMA 3 provides improved predictions compared to GPT-3.5 and GPT-4o. This work highlights the versatility of LLMs, suggesting that LLM-like generative models can potentially transcend their traditional applications to tackle complex physical phenomena, thus paving the way for future research and applications in chemistry, materials science and other scientific domains.

cond-mat.mtrl-sci↗

arXiv2025

Leveraging Vision Capabilities of Multimodal LLMs for Automated Data Extraction from Plots

Automated data extraction from research texts has been steadily improving, with the emergence of large language models (LLMs) accelerating progress even further. Extracting data from plots in research papers, however, has been such a complex task that it has predominantly been confined to manual data extraction. We show that current multimodal large language models, with proper instructions and engineered workflows, are capable of accurately extracting data from plots. This capability is inherent to the pretrained models and can be achieved with a chain-of-thought sequence of zero-shot engineered prompts we call PlotExtract, without the need to fine-tune. We demonstrate PlotExtract here and assess its performance on synthetic and published plots. We consider only plots with two axes in this analysis. For plots identified as extractable, PlotExtract finds points with over 90% precision (and around 90% recall) and errors in x and y position of around 5% or lower. These results prove that multimodal LLMs are a viable path for high-throughput data extraction for plots and in many circumstances can replace the current manual methods of data extraction.

cs.CV↗

arXiv2025

Mechanical Properties of the Meninges: Large Language Model Assisted Systematic Review of over 25,000 Studies

Accurate constitutive models and corresponding mechanical property values for the meninges are important for predicting mechanical damage to brain tissue due to traumatic brain injury. The meninges are often oversimplified in current finite element (FE) head models due to their complex anatomy and spatially-variant mechanical behavior. This study performed a systematic review (SR) on the mechanical properties of each individual layer of the meninges to obtain benchmark data for FE modeling and to identify gaps in the current literature. Relevant studies were filtered through three stages: a broad initial search filter, a large language model classifier, and manual verification by a human reviewer. Out of over 25,000 studies initially considered, this review ultimately included 47 studies on the dura mater, 8 on the arachnoid mater, and 7 on the pia mater, representing the largest and most comprehensive SR on the mechanical properties of the meninges. Each layer was found to exhibit nonlinear rate dependence that varies with species, age, location, and orientation. This study revealed that the elastic modulus of pia mater most often used in simplified linear elastic FE models is likely underestimated by an order of magnitude and fails to consider directional dependence. Future studies investigating the mechanical properties of the meninges should focus on a wider range of loading rates as well as age effects for the arachnoid mater and pia mater, as these features are relatively understudied and expected to affect the fidelity of FE predictions.

cond-mat.soft↗

arXiv2024

Beyond designer's knowledge: Generating materials design hypotheses via large language models

Materials design often relies on human-generated hypotheses, a process inherently limited by cognitive constraints such as knowledge gaps and limited ability to integrate and extract knowledge implications, particularly when multidisciplinary expertise is required. This work demonstrates that large language models (LLMs), coupled with prompt engineering, can effectively generate non-trivial materials hypotheses by integrating scientific principles from diverse sources without explicit design guidance by human experts. These include design ideas for high-entropy alloys with superior cryogenic properties and halide solid electrolytes with enhanced ionic conductivity and formability. These design ideas have been experimentally validated in high-impact publications in 2023 not available in the LLM training data, demonstrating the LLM's ability to generate highly valuable and realizable innovative ideas not established in the literature. Our approach primarily leverages materials system charts encoding processing-structure-property relationships, enabling more effective data integration by condensing key information from numerous papers, and evaluation and categorization of numerous hypotheses for human cognition, both through the LLM. This LLM-driven approach opens the door to new avenues of artificial intelligence-driven materials discovery by accelerating design, democratizing innovation, and expanding capabilities beyond the designer's direct knowledge.

cs.LG↗

arXiv2024

Flexible, Model-Agnostic Method for Materials Data Extraction from Text Using General Purpose Language Models

Accurate and comprehensive material databases extracted from research papers are crucial for materials science and engineering, but their development requires significant human effort. With large language models (LLMs) transforming the way humans interact with text, LLMs provide an opportunity to revolutionize data extraction. In this study, we demonstrate a simple and efficient method for extracting materials data from full-text research papers leveraging the capabilities of LLMs combined with human supervision. This approach is particularly suitable for mid-sized databases and requires minimal to no coding or prior knowledge about the extracted property. It offers high recall and nearly perfect precision in the resulting database. The method is easily adaptable to new and superior language models, ensuring continued utility. We show this by evaluating and comparing its performance on GPT-3 and GPT-3.5/4 (which underlie ChatGPT), as well as free alternatives such as BART and DeBERTaV3. We provide a detailed analysis of the method's performance in extracting sentences containing bulk modulus data, achieving up to 90% precision at 96% recall, depending on the amount of human effort involved. We further demonstrate the method's broader effectiveness by developing a database of critical cooling rates for metallic glasses over twice the size of previous human curated databases.

cond-mat.mtrl-sci↗

arXiv2024

Ultra-fast Oxygen Conduction in Sillén Oxychlorides

Oxygen ion conductors are crucial for enhancing the efficiency of various clean energy technologies, including fuel cells, batteries, electrolyzers, membranes, sensors, and more. In this study, LaBi2O4Cl is identified as an ultra-fast oxygen conductor from the MBi2O4X (M=rare-earth element, X=halogen element) family, discovered by a structure-similarity analysis of >60k oxygen-containing compounds. Ab initio studies reveal that LaBi2O4Cl has an ultra-low migration barrier of 0.1 eV for oxygen vacancy, significantly lower than 0.6-0.8 eV for interstitial oxygen. Frenkel pairs are the dominant defects in intrinsic LaBi2O4Cl, facilitating notable oxygen diffusion primarily through vacancies at higher temperatures. LaBi2O4Cl with extrinsic oxygen vacancies (2.8%) exhibits a conductivity of 0.3 S/cm at 25°C, maintains a 0.1 eV diffusion barrier up to 1100°C, and transitions from extrinsic to mixed extrinsic and intrinsic behavior as the Frenkel pair concentration increases at higher temperatures. Experimental results on synthesized LaBi2O4Cl and Sr-doped LaBi2O4Cl demonstrate comparable or higher oxygen conductivity than YSZ and LSGM below 400 °C, with lower activation energies. Further experimental optimization of LaBi2O4Cl, including aliovalent doping and microstructure refinement, could significantly enhance its performance and efficiency, facilitating fast oxygen conduction approaching room temperature.

cond-mat.mtrl-sci↗

arXiv2024

Electronic and structural properties of group IV materials and their polytypes

Nanotechnology's impact on semiconductor industry advancement, particularly through the engineering of nanostructures like nanowires, opens new possibilities for material functionality due to the tunable physical properties of nanostructures compared to bulk materials. This paper presents a comprehensive study on group IV semiconductors and their binaries across four polytypes: 2H, 3C, 4H, and 6H, focusing on their optoelectronic application potential. Deep understanding of these polytypes is particularly relevant for nanowire-based technologies. Through first principles modeling, we examine the structural and electronic properties of these materials, emphasizing their band structure, stability, and the feasibility for light-emitting applications. We use a generalized Ising model to discuss materials stability and tendency for polytypism. We also determine relative band edge positions and employ a six $k\cdot p$ model for a detailed understanding of the materials' electronic properties. Due to the comprehensive nature of this study, we provide insight on the chemical trends present in all of the studied properties. Our theoretical predictions align well with existing experimental data, suggesting new avenues for nanostructure-based device development. The discussion extends to the implications of these findings for the fabrication of optoelectronic devices with the studied IV-IV materials, highlighting the challenges and opportunities for future research in nanowire synthesis and their application.

cond-mat.mtrl-sci↗

arXiv2024

Extracting Accurate Materials Data from Research Papers with Conversational Language Models and Prompt Engineering

There has been a growing effort to replace manual extraction of data from research papers with automated data extraction based on natural language processing, language models, and recently, large language models (LLMs). Although these methods enable efficient extraction of data from large sets of research papers, they require a significant amount of up-front effort, expertise, and coding. In this work we propose the ChatExtract method that can fully automate very accurate data extraction with minimal initial effort and background, using an advanced conversational LLM. ChatExtract consists of a set of engineered prompts applied to a conversational LLM that both identify sentences with data, extract that data, and assure the data's correctness through a series of follow-up questions. These follow-up questions largely overcome known issues with LLMs providing factually inaccurate responses. ChatExtract can be applied with any conversational LLMs and yields very high quality data extraction. In tests on materials data we find precision and recall both close to 90% from the best conversational LLMs, like ChatGPT-4. We demonstrate that the exceptional performance is enabled by the information retention in a conversational model combined with purposeful redundancy and introducing uncertainty through follow-up prompts. These results suggest that approaches similar to ChatExtract, due to their simplicity, transferability, and accuracy are likely to become powerful tools for data extraction in the near future. Finally, databases for critical cooling rates of metallic glasses and yield strengths of high entropy alloys are developed using ChatExtract.

cs.CL↗

arXiv2022

Machine learning for impurity charge-state transition levels in semiconductors from elemental properties using multi-fidelity datasets

Quantifying charge-state transition energy levels of impurities in semiconductors is critical to understanding and engineering their optoelectronic properties for applications ranging from solar photovoltaics to infrared lasers. While these transition levels can be measured and calculated accurately, such efforts are time-consuming and more rapid prediction methods would be beneficial. Here, we significantly reduce the time typically required to predict impurity transition levels using multi-fidelity datasets and a machine learning approach employing features based on elemental properties and impurity positions. We use transition levels obtained from low-fidelity (i.e., local-density approximation or generalized gradient approximation) density functional theory (DFT) calculations, corrected using a recently proposed modified band alignment scheme, which well-approximates transition levels from high-fidelity DFT (i.e., hybrid HSE06). The model fit to the large multi-fidelity database shows improved accuracy compared to the models trained on the more limited high-fidelity values. Crucially, in our approach, when using the multi-fidelity data, high-fidelity values are not required for model training, significantly reducing the computational cost required for training the model. Our machine learning model of transition levels has a root mean squared (mean absolute) error of 0.36 (0.27) eV vs high-fidelity hybrid functional values when averaged over 14 semiconductor systems from the II-VI and III-V families. As a guide for use on other systems, we assessed the model on simulated data to show the expected accuracy level as a function of bandgap for new materials of interest. Finally, we use the model to predict a complete space of impurity charge-state transition levels in all zinc blende III-V and II-VI systems.

cond-mat.mtrl-sci↗

arXiv2021

Modified Band Alignment Method to Obtain Hybrid Functional Accuracy from Standard DFT: Application to Defects in Highly Mismatched III-V:Bi Alloys

This paper provides an accurate theoretical defect energy database for pure and Bi-containing III-V (III-V:Bi) materials and investigates efficient methods for high-throughput defect calculations based on corrections of results obtained with local and semi-local functionals. Point defects as well as nearest-neighbor and second-nearest-neighbor pair defects were investigated in charge states ranging from -5 to 5. Ga-V:Bi systems (GaP:Bi, GaAs:Bi, and GaSb:Bi) were thoroughly investigated with significantly slower, higher fidelity hybrid Heyd-Scuseria-Ernzerhof (HSE) and significantly faster, lower fidelity local density approximation (LDA) calculations. In both approaches spurious electrostatic interactions were corrected with the Freysoldt correction. The results were verified against available experimental results and used to assess the accuracy of a previous band alignment correction. Here, a modified band alignment method is proposed in order to better predict the HSE values from the LDA ones. The proposed method allows prediction of defect energies with values that approximate those from the HSE functional at the computational cost of LDA (about 20x faster for the systems studied here). Tests of selected point defects in In-V:Bi materials resulted in corrected LDA values having a mean absolute error (MAE)=0.175 eV for defect levels vs. HSE. The method was further verified on an external database of defects and impurities in CdX (X=S, Se, Te) systems, yielding a MAE=0.194 eV. These tests demonstrate the correction to be sufficient for qualitative and semi-quantitative predictions, and may suggest transferability to many semiconductor systems without significant loss in accuracy. Properties of the remaining In-V:Bi defects and all Al-V:Bi defects were predicted with the use of the modified band alignment method.

cond-mat.mtrl-sci↗

arXiv2021

MAST-SEY: MAterial Simulation Toolkit for Secondary Electron Yield. A monte carlo approach to secondary electron emission based on complex dielectric functions

MAST-SEY is an open-source Monte Carlo code capable of calculating secondary electron emission using input data generated entirely from first principle (density functional theory) calculations. It utilizes the complex dielectric function and Penn's theory for inelastic scattering processes, and relativistic Schrödinger theory by means of a partial-wave expansion method to govern elastic scattering. It allows the user to include explicitly calculated momentum dependence of the dielectric function, as well as to utilize first-principle density of states in secondary electron generation, which provides a more complete description of the underlying physics. In this paper we thoroughly describe the theoretical aspects of the modeling, as used in the code, and present sample results obtained for copper and aluminum.

cond-mat.mtrl-sci↗

arXiv2019

Electronic band structure of nitrogen diluted Ga(PAsN): Formation of the intermediate band, direct and indirect optical transitions, localization of states

The electronic band structure of Ga(PAsN) with a few percent of nitrogen is calculated in the whole composition of Ga(PAs) host using the state-of-the-art density functional methods including the modified Becke-Johnson functional to correctly reproduce the band gap, and band unfolding to reveal the character of the bands within the entire Brillouin zone. As expected, relatively small amounts of nitrogen introduced to Ga(PAs) lead to formation of an intermediate band below the conduction band which is consistent with the band anticrossing model, widely used to describe the electronic band structure of dilute nitrides. However, in this study calculations are performed in the whole Brillouin zone and reveal the significance of correct description of the band structure near the edges of Brillouin zone, especially for indirect band gap P-rich host alloy, which may not be properly captured with simpler models. The theoretical results are compared with experimental studies, confirming their reliability. The influence of nitrogen on the band structure is discussed in terms of application of Ga(PAsN) in optoelectronic devices such as intermediate band solar cells and light emitters. It is found that Ga(PAsN) with low N and As concentration has a band structure suitable for integration in Si tandem solar cells, since the lattice mismatch between Si and Ga(PAsN) is small in this case. Moreover, it is concluded that P-rich Ga(PAsN) alloys with low N concentration have a promising band structure for two colour emitters. Additionally, the effect of nitrogen incorporation on the carrier localization is studied and discussed.

cond-mat.mtrl-sci↗

arXiv2019

Strain and Band-Gap Engineering in Ge-Sn Alloys via P Doping

Ge with a quasi-direct band gap can be realized by strain engineering, alloying with Sn, or ultrahigh n-type doping. In this work, we use all three approaches together to fabricate direct-band-gap Ge-Sn alloys. The heavily doped n-type Ge-Sn is realized with CMOS-compatible nonequilibrium material processing. P is used to form highly doped n-type Ge-Sn layers and to modify the lattice parameter of P-doped Ge-Sn alloys. The strain engineering in heavily-P-doped Ge-Sn films is confirmed by x-ray diffraction and micro Raman spectroscopy. The change of the band gap in P-doped Ge-Sn alloy as a function of P concentration is theoretically predicted by density functional theory and experimentally verified by near-infrared spectroscopic ellipsometry. According to the shift of the absorption edge, it is shown that for an electron concentration greater than 1x10^20 cm-3 the band-gap renormalization is partially compensated by the Burstein-Moss effect. These results indicate that Ge-based materials have high potential for use in near-infrared optoelectronic devices, fully compatible with CMOS technology.

cond-mat.mtrl-sci↗