arXiv subjects

Mads Brandbyge

Publications and source records attributed to Mads Brandbyge.

At least 91 records · Page 5Linked to original sources

arXiv2009

Atomistic theory for the damping of vibrational modes in mono-atomic gold chains

We develop a computational method for evaluating the damping of vibrational modes in mono-atomic metallic chains suspended between bulk crystals under external strain. The damping is due to the coupling between the chain and contact modes and the phonons in the bulk substrates. The geometry of the atoms forming the contact is taken into account. The dynamical matrix is computed with density functional theory in the atomic chain and the contacts using finite atomic displacements, while an empirical method is employed for the bulk substrate. As a specific example, we present results for the experimentally realized case of gold chains in two different crystallographic directions. The range of the computed damping rates confirm the estimates obtained by fits to experimental data [Frederiksen et al., Phys. Rev. B, 75, 205413(R)(2007)]. Our method indicates that an order-of-magnitude variation in the damping is possible even for relatively small changes in the strain. Such detailed insight is necessary for a quantitative analysis of damping in metallic atomic chains, and in explaining the rich phenomenology seen in the experiments.

cond-mat.mes-hall↗

arXiv2009

Surface decorated silicon nanowires: a route to high-ZT thermoelectrics

Based on atomistic calculations of electron and phonon transport, we propose to use surface decorated Silicon nanowires (SiNWs) for thermoelectric applications. Two examples of surface decorations are studied to illustrate the underlying deas: Nanotrees and alkyl functionalized SiNWs. For both systems we find, (i) that the phonon conductance is significantly reduced compared to the electronic conductance leading to high thermoelectric figure of merit, $ZT$, and (ii) for ultra-thin wires surface decoration leads to significantly better performance than surface disorder.

cond-mat.mes-hall↗

arXiv2009

DFT study of graphene antidot lattices: The roles of geometry relaxation and spin

Graphene sheets with regular perforations, dubbed as antidot lattices, have theoretically been predicted to have a number of interesting properties. Their recent experimental realization with lattice constants below 100 nanometers stresses the urgency of a thorough understanding of their electronic properties. In this work we perform calculations of the band structure for various hydrogen-passivated hole geometries using both spin-polarized density functional theory (DFT) and DFT based tight-binding (DFTB) and address the importance of relaxation of the structures using either method or a combination thereof. We find from DFT that all structures investigated have band gaps ranging from 0.2 eV to 1.5 eV. Band gap sizes and general trends are well captured by DFTB with band gaps agreeing within about 0.2 eV even for very small structures. A combination of the two methods is found to offer a good trade-off between computational cost and accuracy. Both methods predict non-degenerate midgap states for certain antidot hole symmetries. The inclusion of spin results in a spin-splitting of these states as well as magnetic moments obeying the Lieb theorem. The local spin texture of both magnetic and non-magnetic symmetries is addressed.

cond-mat.mes-hall↗

arXiv2009

Heat conductance is strongly anisotropic for pristine silicon nanowires

We compute atomistically the heat conductance for ultra-thin pristine silicon nanowires (SiNWs) with diameters ranging from 1 to 5 nm. The room temperature thermal conductance is found to be highly anisotropic: wires oriented along the <110> direction have 50-75% larger conductance than wires oriented along the <100> and <111> directions. We show that the anisotropies can be qualitatively understood and reproduced from the bulk phonon band structure. Ab initio density functional theory (DFT) is used to study the thinnest wires, but becomes computationally prohibitive for larger diameters, where we instead use the Tersoff empirical potential model (TEP). For the smallest wires, the thermal conductances obtained from DFT- and TEP calculations agree within 10%. The presented results could be relevant for future phonon-engineering of nanowire devices.

cond-mat.mtrl-sci↗

arXiv2008

Electron- and phonon transport in silicon nanowires: an atomistic approach to thermoelectric properties

We compute both electron- and phonon transmissions in thin disordered silicon nanowires. Our atomistic approach is based on tight-binding and empirical potential descriptions of the electronic and phononic systems, respectively. Surface disorder is modeled by including surface silicon vacancies. It is shown that the average phonon- and electron transmissions through long SiNWs containing many vacancies can be accurately estimated from the scattering properties of the isolated vacancies using a recently proposed averaging method [Phys. Rev. Lett. 99, 076803 (2007)]. We apply this averaging method to surface disordered SiNWs in the diameter range 1-3 nm to compute the thermoelectric figure of merit, ZT. It is found that the phonon transmission is affected more by the vacancies than the electronic transmission leading to an increased thermoelectric performance of disordered wires, in qualitative agreement with recent experiments. The largest ZT>3 is found in strongly disordered <111> oriented wires with a diameter of 2 nm.

cond-mat.mes-hall↗

arXiv2008

Unified description of inelastic propensity rules for electron transport through nanoscale junctions

We present a method to analyze the results of first-principles based calculations of electronic currents including inelastic electron-phonon effects. This method allows us to determine the electronic and vibrational symmeties in play, and hence to obtain the so-called propensity rules for the studied systems. We show that only a few scattering states -- namely those belonging to the most transmitting eigenchannels -- need to be considered for a complete description of the electron transport. We apply the method on first-principles calculations of four different systems and obtain the propensity rules in each case.

cond-mat.mes-hall↗

arXiv2008

Ab initio study of spin-dependent transport in carbon nanotubes with iron and vanadium adatoms

We present an ab initio study of spin dependent transport in armchair carbon nanotubes with transition metal adsorbates, iron or vanadium. We neglect the effect of tube curvature and model the nanotube by graphene with periodic boundary conditions. A density functional theory based nonequilibrium Green's function method is used to compute the electronic structure and zero-bias conductance. The presence of the adsorbate causes a strong scattering of electrons of one spin type only. The scattering is shown to be due to coupling of the two armchair band states to the metal 3d orbitals with matching symmetry causing Fano resonances appearing as dips in the transmission function. The spin type (majority/minority) being scattered depends on the adsorbate and is explained in terms of d-state filling. The results are qualitatively reproduced using a simple tight-binding model, which is then used to investigate the dependence of the transmission on the nanotube width. We find a decrease in the width of the transmission dip as the tube-size increases.

cond-mat.mtrl-sci↗

arXiv2008

Transport in Silicon Nanowires: Role of Radial Dopant Profile

We consider the electronic transport properties of phosphorus (P) doped silicon nanowires (SiNWs). By combining ab initio density functional theory (DFT) calculations with a recursive Green's function method, we calculate the conductance distribution of up to 200 nm long SiNWs with different distributions of P dopant impurities. We find that the radial distribution of the dopants influences the conductance properties significantly: Surface doped wires have longer mean-free paths and smaller sample-to-sample fluctuations in the cross-over from ballistic to diffusive transport. These findings can be quantitatively predicted in terms of the scattering properties of the single dopant atoms, implying that relatively simple calculations are sufficient in practical device modeling

cond-mat.mes-hall↗

arXiv2007

Transmission eigenchannels from non-equilibrium Green's functions

The concept of transmission eigenchannels is described in a tight-binding nonequilibrium Green's function (NEGF) framework. A simple procedure for calculating the eigenchannels is derived using only the properties of the device subspace and quantities normally available in a NEGF calculation. The method is exemplified by visualization in real-space of the eigenchannels for three different molecular and atomic-wires.

cond-mat.mes-hall↗

arXiv2007

Screening model for nanowire surface-charge sensors in liquid

The conductance change of nanowire field-effect transistors is considered a highly sensitive probe for surface charge. However, Debye screening of relevant physiological liquid environments challenge device performance due to competing screening from the ionic liquid and nanowire charge carriers. We discuss this effect within Thomas-Fermi and Debye-Huckel theory and derive analytical results for cylindrical wires which can be used to estimate the sensitivity of nanowire surface-charge sensors. We study the interplay between the nanowire radius, the Thomas-Fermi and Debye screening lengths, and the length of the functionalization molecules. The analytical results are compared to finite-element calculations on a realistic geometry.

cond-mat.soft↗

arXiv2007

Scaling theory put into practice: first-principles modeling of transport in doped silicon nanowires

We combine the ideas of scaling theory and universal conductance fluctuations with density-functional theory to analyze the conductance properties of doped silicon nanowires. Specifically, we study the cross-over from ballistic to diffusive transport in boron (B) or phosphorus (P) doped Si-nanowires by computing the mean free path, sample averaged conductance , and sample-to-sample variations std(G) as a function of energy, doping density, wire length, and the radial dopant profile. Our main findings are: (i) the main trends can be predicted quantitatively based on the scattering properties of single dopants; (ii) the sample-to-sample fluctuations depend on energy but not on doping density, thereby displaying a degree of universality, and (iii) in the diffusive regime the analytical predictions of the DMPK theory are in good agreement with our ab initio calculations.

cond-mat.mes-hall↗

arXiv2007

From tunneling to contact: Inelastic signals in an atomic gold junction

The evolution of electron conductance in the presence of inelastic effects is studied as an atomic gold contact is formed evolving from a low-conductance regime (tunneling) to a high-conductance regime (contact). In order to characterize each regime, we perform density functional theory (DFT) calculations to study the geometric and electronic structures, together with the strength of the atomic bonds and the associated vibrational frequencies. The conductance is calculated by first evaluating the transmission of electrons through the system, and secondly by calculating the conductance change due to the excitation of vibrations. As found in previous studies [Paulsson et al., Phys. Rev. B. 72, 201101(R) (2005)] the change in conductance due to inelastic effects permits to characterize the crossover from tunneling to contact. The most notorious effect being the crossover from an increase in conductance in the tunneling regime to a decrease in conductance in the contact regime when the bias voltage matches a vibrational threshold. Our DFT-based calculations actually show that the effect of vibrational modes in electron conductance is rather complex, in particular when modes localized in the contact region are permitted to extend into the electrodes. As an example, we find that certain modes can give rise to decreases in conductance when in the tunneling regime, opposite to the above mentioned result. Whereas details in the inelastic spectrum depend on the size of the vibrational region, we show that the overall change in conductance is quantitatively well approximated by the simplest calculation where only the apex atoms are allowed to vibrate. Our study is completed by the application of a simplified model where the relevant parameters are obtained from the above DFT-based calculations.

cond-mat.mes-hall↗

arXiv2006

Inelastic transport theory from first-principles: methodology and applications for nanoscale devices

We describe a first-principles method for calculating electronic structure, vibrational modes and frequencies, electron-phonon couplings, and inelastic electron transport properties of an atomic-scale device bridging two metallic contacts under nonequilibrium conditions. The method extends the density-functional codes SIESTA and TranSIESTA that use atomic basis sets. The inelastic conductance characteristics are calculated using the nonequilibrium Green's function formalism, and the electron-phonon interaction is addressed with perturbation theory up to the level of the self-consistent Born approximation. While these calculations often are computationally demanding, we show how they can be approximated by a simple and efficient lowest order expansion. Our method also addresses effects of energy dissipation and local heating of the junction via detailed calculations of the power flow. We demonstrate the developed procedures by considering inelastic transport through atomic gold wires of various lengths, thereby extending the results presented in [Frederiksen et al., Phys. Rev. Lett. 93, 256601 (2004)]. To illustrate that the method applies more generally to molecular devices, we also calculate the inelastic current through different hydrocarbon molecules between gold electrodes. Both for the wires and the molecules our theory is in quantitative agreement with experiments, and characterizes the system-specific mode selectivity and local heating.

cond-mat.mes-hall↗

arXiv2006

Inelastic fingerprints of hydrogen contamination in atomic gold wire systems

We present series of first-principles calculations for both pure and hydrogen contaminated gold wire systems in order to investigate how such impurities can be detected. We show how a single H atom or a single H2 molecule in an atomic gold wire will affect forces and Au-Au atom distances under elongation. We further determine the corresponding evolution of the low-bias conductance as well as the inelastic contributions from vibrations. Our results indicate that the conductance of gold wires is only slightly reduced from the conductance quantum G0=2e^2/h by the presence of a single hydrogen impurity, hence making it difficult to use the conductance itself to distinguish between various configurations. On the other hand, our calculations of the inelastic signals predict significant differences between pure and hydrogen contaminated wires, and, importantly, between atomic and molecular forms of the impurity. A detailed characterization of gold wires with a hydrogen impurity should therefore be possible from the strain dependence of the inelastic signals in the conductance.

cond-mat.mes-hall↗

arXiv2006

Electronic transport in Si nanowires: Role of bulk and surface disorder

We calculate the resistance and mean free path in long metallic and semiconducting silicon nanowires (SiNWs) using two different numerical approaches: A real space Kubo method and a recursive Green's function method. We compare the two approaches and find that they are complementary: depending on the situation a preferable method can be identified. Several numerical results are presented to illustrate the relative merits of the two methods. Our calculations of relaxed atomic structures and their conductance properties are based on density functional theory without introducing adjustable parameters. Two specific models of disorder are considered: Un-passivated, surface reconstructed SiNWs are perturbed by random on-site (Anderson) disorder whereas defects in hydrogen passivated wires are introduced by randomly removed H atoms. The un-passivated wires are very sensitive to disorder in the surface whereas bulk disorder has almost no influence. For the passivated wires, the scattering by the hydrogen vacancies is strongly energy dependent and for relatively long SiNWs (L>200 nm) the resistance changes from the Ohmic to the localization regime within a 0.1 eV shift of the Fermi energy. This high sensitivity might be used for sensor applications.

cond-mat.mes-hall↗

arXiv2005

Modeling inelastic phonon scattering in atomic- and molecular-wire junctions

Computationally inexpensive approximations describing electron-phonon scattering in molecular-scale conductors are derived from the non-equilibrium Green's function method. The accuracy is demonstrated with a first principles calculation on an atomic gold wire. Quantitative agreement between the full non-equilibrium Green's function calculation and the newly derived expressions is obtained while simplifying the computational burden by several orders of magnitude. In addition, analytical models provide intuitive understanding of the conductance including non-equilibrium heating and provide a convenient way of parameterizing the physics. This is exemplified by fitting the expressions to the experimentally observed conductances through both an atomic gold wire and a hydrogen molecule.

cond-mat.mes-hall↗

arXiv2004

Inelastic scattering and local heating in atomic gold wires

We present a method for including inelastic scattering in a first-principles density-functional computational scheme for molecular electronics. As an application, we study two geometries of four-atom gold wires corresponding to two different values of strain, and present results for nonlinear differential conductance vs. device bias. Our theory is in quantitative agreement with experimental results, and explains the experimentally observed mode selectivity. We also identify the signatures of phonon heating.

cond-mat.mes-hall↗

arXiv2004

Modeling of inelastic transport in one-dimensional metallic atomic wires

Inelastic effects in electron transport through nano-sized devices are addressed with a method based on nonequilibrium Green's functions (NEGF) and perturbation theory to infinite order in the electron-vibration coupling. We discuss the numerical implementation which involves an iterative scheme to solve a set of coupled non-linear equations for the electronic Green's functions and the self-energies due to vibrations. To illustrate our method, we apply it to a one-dimensional single-orbital tight-binding description of the conducting electrons in atomic gold wires, and show that this simple model is able to capture most of the essential physics.

cond-mat.mes-hall↗