arXiv subjects
Publications and source records attributed to Magnus Karlsson.
We present an end-to-end model of earthquake-perturbed signal propagation in submarine fibres. Ground displacements are converted to fibre strain via ocean pressure, and injected into a split-step model. Our model shows good qualitative alignment with measurements from the Curie cable during the 2020 Oaxaca earthquake.
Time-varying distortions in communication systems can significantly degrade the performance of soft-decision forward error correction. This paper presents a burst-aware (BA) low-density parity-check (LDPC) decoding scheme for channels affected by bursty phase noise. By applying differential coding to a Wiener process with time-varying innovation variance, bursty differential phase noise is obtained. Simulation results demonstrate that, compared to conventional decoding, the BA scheme achieves gains in the signal-to-noise ratio of up to $0.7$~dB at a bit error rate (BER) of $4\cdot10^{-3}$ and more than $1$~dB at a packet error rate (PER) of $1\cdot10^{-2}$. Furthermore, by iterating between channel estimation and \ac{ldpc} decoding, forming the proposed iterative burst-aware (IBA) decoding scheme, the gains increase to $1.4$~dB and more than $3$~dB, respectively. More importantly, the IBA scheme significantly improves robustness to bursty phase noise. Compared with the conventional scheme, the IBA scheme can reduce both \ac{ber} and \ac{per} by up to two orders of magnitude under severe bursty phase noise.
We propose physics-informed digital twin (PIDT): a fiber parameter estimation approach that combines a parameterized split-step method with a physics-informed loss. PIDT improves accuracy and convergence speed with lower complexity compared to previous neural operators.
Hyperpolarized 13C Magnetic Resonance Spectroscopic Imaging (HP 13C-MRSI) has the potential to greatly improve diagnostic radiology thanks to its unique capability to detect, noninvasively, a wide range of diseases entailing aberrant metabolism. Nevertheless, it struggles to enter everyday clinical practice as an alternative and/or complement to Positron Emission Tomography (PET). Because of the minute-long hyperpolarization lifetime of the MR HP contrast agents, one of the reasons is, differently from PET, the need and financial burden to have the polarizing machine on site and, as close as possible to the MR scanner. In this work, we show that dDNP samples prepared with UV-induced labile radicals can bridge the technical gap with PET and provide MRI facilities with hours-long relaxing HP contrast agents. As a demonstration, we show the first across cities HP 13C-MRSI experiment in vivo and on a clinical scanner for a perfusion/angiography ([1-13C]HP001) and a metabolic ([U-13C, d7]glucose) contrast agent.
This study showcases the digitalization of L\"ofstad Castle in Sweden to contribute to preserving its heritage values. The castle and its collections are deteriorating due to an inappropriate indoor climate. To address this, thirteen cloud-connected sensor boxes, equipped with 84 sensors, were installed throughout the main building, from the basement to the attic, to continuously monitor various indoor environmental parameters. The collected extensive multi-parametric data form the basis for creating a parametric digital twin of the building. The digital twin and detailed data analytics offer a deeper understanding of indoor climate and guide the adoption of appropriate heating and ventilation strategies. The results revealed the need to address high humidity problems in the basement and on the ground floor, such as installing vapor barriers. Opportunities for adopting energy-efficient heating and ventilation strategies on the upper floors were also highlighted. The digitalization solution and findings are not only applicable to L\"ofstad Castle but also provide valuable guidance for the conservation of other historic buildings facing similar challenges.
The capacity of a discrete-time channel with correlated phase noises is investigated. In particular, the electro-optic frequency comb system is considered, where the phase noise of each subchannel is a combination of two independent Wiener phase-noise sources. Capacity upper and lower bounds are derived for this channel and are compared with lower bounds obtained by numerically evaluating the achievable information rates using quadrature amplitude modulation constellations. Capacity upper and lower bounds are provided for the high signal-to-noise ratio (SNR) regime. The multiplexing gain (pre-log) is shown to be $M-1$, where $M$ represents the number of subchannels. A constant gap between the asymptotic upper and lower bounds is observed, which depends on the number of subchannels $M$. For the specific case of $M=2$, capacity is characterized up to a term that vanishes as the SNR grows large.
Digital transformation in the built environment generates vast data for developing data-driven models to optimize building operations. This study presents an integrated solution utilizing edge computing, digital twins, and deep learning to enhance the understanding of climate in buildings. Parametric digital twins, created using an ontology, ensure consistent data representation across diverse service systems equipped by different buildings. Based on created digital twins and collected data, deep learning methods are employed to develop predictive models for identifying patterns in indoor climate and providing insights. Both the parametric digital twin and deep learning models are deployed on edge for low latency and privacy compliance. As a demonstration, a case study was conducted in a historic building in \"Osterg\"otland, Sweden, to compare the performance of five deep learning architectures. The results indicate that the time-series dense encoder model exhibited strong competitiveness in performing multi-horizon forecasts of indoor temperature and relative humidity with low computational costs.
We explore the optimal pilot positioning for phase tracking in electro-optic frequency comb setups. We show that, in contrast to previous results for regular multichannel systems, allocating the first and the last channels for pilots is optimal given a fixed pilot overhead
We consider the problem of recovering spatially resolved polarization information from receiver Jones matrices. We introduce a physics-based learning approach, improving noise resilience compared to previous inverse scattering methods, while highlighting challenges related to model overparameterization.
Narrow-linewidth yet tunable laser oscillators are one of the most important tools for precision metrology, optical atomic clocks, sensing and quantum computing. Commonly used tunable coherent oscillators are based on stimulated emission or stimulated Brillouin scattering; as a result, the operating wavelength band is limited by the gain media. Based on nonlinear optical gain, optical parametric oscillators (OPOs) enable coherent signal generation within the whole transparency window of the medium used. However, the demonstration of OPO-based Hertz-level linewidth and tunable oscillators has remained elusive. Here, we present a tunable coherent oscillator based on a multimode coherent OPO in a high-Q microresonator, i.e., a microcomb. Single-mode coherent oscillation is realized through self-injection locking (SIL) of one selected comb line. We achieve coarse tuning up to 20 nm, and an intrinsic linewidth down to sub-Hertz level, which is three orders of magnitude lower than the pump. Furthermore, we demonstrate that this scheme results into repetition rate stabilization of the microcomb. These results open exciting possibilities for generating tunable coherent radiation where stimulated emission materials are difficult to obtain, and the stabilization of microcomb sources beyond the limits imposed by the thermorefractive noise in the cavity.
We monitor a 524km live network link using an FPGA-based sensing-capable coherent transceiver prototype during a human-caused cable break. Post-analysis of polarization data reveals minute-level potential warning precursors and baseline-exceeding changes directly preceding the break.
Digital transformation in buildings accumulates massive operational data, which calls for smart solutions to utilize these data to improve energy performance. This study has proposed a solution, namely Deep Energy Twin, for integrating deep learning and digital twins to better understand building energy use and identify the potential for improving energy efficiency. Ontology was adopted to create parametric digital twins to provide consistency of data format across different systems in a building. Based on created digital twins and collected data, deep learning methods were used for performing data analytics to identify patterns and provide insights for energy optimization. As a demonstration, a case study was conducted in a public historic building in Norrk\"oping, Sweden, to compare the performance of state-of-the-art deep learning architectures in building energy forecasting.
Measuring microcombs in amplitude and phase provides unique insight into the nonlinear cavity dynamics but spectral phase measurements are experimentally challenging. Here, we report a linear heterodyne technique assisted by electro-optic downconversion that enables differential phase measurement of such spectra with unprecedented sensitivity (-50 dBm) and bandwidth coverage (> 110 nm in the telecommunications range). We validate the technique with a series of measurements, including single cavity and photonic molecule microcombs.
In this paper, we analyze the effectiveness of polarization tracking algorithms in optical transmission systems suffering from fast state of polarization (SOP) rotations and polarization-dependent loss (PDL). While most of the gradient descent (GD)-based algorithms in the literature may require step size adjustment when the channel condition changes, we propose tracking algorithms that can perform similarly or better without parameter tuning. Numerical simulation results show higher robustness of the proposed algorithms to SOP and PDL drift compared to GD-based algorithms, making them promising candidates to be used in aerial fiber links where the SOP can potentially drift rapidly, and therefore becomes challenging to track.
In optical fiber communication, due to the random variation of the environment, the state of polarization (SOP) fluctuates randomly with time leading to distortion and performance degradation. The memory-less SOP fluctuations can be regarded as a two-by-two random unitary matrix. In this paper, for what we believe to be the first time, the capacity of the polarization drift channel under an average power constraint with imperfect channel knowledge is characterized. An achievable information rate (AIR) is derived when imperfect channel knowledge is available and is shown to be highly dependent on the channel estimation technique. It is also shown that a tighter lower bound can be achieved when a unitary estimation of the channel is available. However, the conventional estimation algorithms do not guarantee a unitary channel estimation. Therefore, by considering the unitary constraint of the channel, a data-aided channel estimator based on the Kabsch algorithm is proposed, and its performance is numerically evaluated in terms of AIR. Monte Carlo simulations show that Kabsch outperforms the least-square error algorithm. In particular, with complex, Gaussian inputs and eight pilot symbols per block, Kabsch improves the AIR by 0:2 to 0:35 bits/symbol throughout the range of studied signal-to-noise ratios.
Optical amplifiers are essential in numerous photonic applications. Parametric amplifiers, relying on a nonlinear material to create amplification, are uniquely promising as they can amplify without generating excess noise. Here, we demonstrate amplification based on the 3rd order nonlinearity in a single chip, while in addition reporting a noise figure significantly below the conventional quantum limit when operated in phase-sensitive mode. Our results show the potential of nanophotonics for realizing continuous-wave parametric amplification that can enable applications in optical communications, signal processing and quantum optics across a wide range of frequencies.
We demonstrate, for the first time, experimental over-the-fiber training of transmitter neural networks (NNs) using reinforcement learning. Optical back-to-back training of a novel NN-based digital predistorter outperforms arcsine-based predistortion with up to 60\% bit-error-rate reduction.
Probabilistic shaping (PS) has been widely studied and applied to optical fiber communications. The encoder of PS expends the number of bit slots and controls the probability distribution of channel input symbols. Not only studies focused on PS but also most works on optical fiber communications have assumed source uniformity (i.e. equal probability of marks and spaces) so far. On the other hand, the source information is in general nonuniform, unless bit-scrambling or other source coding techniques to balance the bit probability is performed. Interestingly, one can exploit the source nonuniformity to reduce the entropy of the channel input symbols with the PS encoder, which leads to smaller required signal-to-noise ratio at a given input logic rate. This benefit is equivalent to a combination of data compression and PS, and thus we call this technique compressed shaping. In this work, we explain its theoretical background in detail, and verify the concept by both numerical simulation and a field programmable gate array (FPGA) implementation of such a system. In particular, we find that compressed shaping can reduce power consumption in forward error correction decoding by up to 90% in nonuniform source cases. The additional hardware resources required for compressed shaping are not significant compared with forward error correction coding, and an error insertion test is successfully demonstrated with the FPGA.