arXiv subjects

Mahmood Bagheri

Publications and source records attributed to Mahmood Bagheri.

13 recordsLinked to original sources

arXiv2026

Laser electro-optic frequency comb in lithium niobate nanophotonics

Optical frequency combs have revolutionized precision science and technology, yet their nanophotonic implementations have failed to simultaneously achieve high efficiency, power, and coherence. Optically driven microcombs provide broad and stable spectra but low usable power, whereas active comb generators, including mode-locked lasers, can be efficient yet offer less control over coherence. We introduce the laser electro-optic (LEO) frequency comb, a comb-generation mechanism in which coherent continuous-wave injection drives a phase-modulated laser cavity above threshold into a distinct operating regime. Unlike other coherently driven integrated comb sources, the LEO comb generates comb powers that exceed the injected continuous-wave power by an order of magnitude. We realize the LEO comb in a hybrid lithium niobate/III-V nanophotonic circuit and demonstrate milliwatt-level power per comb line, 1.76-ps pulses, a 4.7-nm background-free spectrum, and linewidths as narrow as 19.6 kHz. By unifying high efficiency, power, and coherence, this architecture establishes a definitive route to chip-scale frequency comb sources that deliver on the promise of scalable, high-performance coherent optical technologies.

physics.optics↗

arXiv2025

Directional atomic layer etching of MgO-doped lithium niobate using Br-based plasma

Lithium niobate (LiNbO$_3$, LN) is a nonlinear optical material of high interest for integrated photonics with applications ranging from optical communications to quantum information processing. The performance of on-chip devices based on thin-film lithium niobate (TFLN) is presently limited by fabrication imperfections such as sidewall surface roughness and geometry inhomogeneities over the chip. Atomic layer etching (ALE) could potentially be used to overcome these difficulties. Although an isotropic ALE process for LN has been reported, performing LN fabrication completely with ALE faces several challenges, including the lack of a directional ALE process for pattern transfer and the redeposition of involatile compounds. Here, we report a directional ALE process for LN consisting of sequential exposures of HBr/BCl$_3$/Ar plasma for surface modification and Ar plasma for removal. The HBr chemistry is found to decrease redeposition compared to F- and Cl-based plasmas, which we attribute to the higher vapor pressures of Br-based products. A grating pattern etched entirely by the process (total etch depth of 220 nm) exhibits no aspect ratio dependent etching (ARDE) down to the smallest tested gap of 150 nm, in contrast to ion milling in which ARDE manifests even at 300 nm gaps for the same etch depth. The HBr plasma chemistry is also found to support an isotropic process consisting of sequential exposures of H$_2$ plasma and HBr/BCl$_3$/Ar plasma. These processes could be used together to perform the complete fabrication process for TFLN devices, eliminating imperfections arising from ion milling.

cond-mat.mtrl-sci↗

arXiv2024

Sub-100 Hz Intrinsic Linewidth 852 nm Silicon Nitride External Cavity Laser

We demonstrate an external cavity laser with intrinsic linewidth below 100 Hz around an operating wavelength of 852 nm, selected for its relevance to laser cooling and manipulation of cesium atoms. This system achieves a maximum CW output power of 24 mW, wavelength tunability over 15 nm, and a side-mode suppression ratio exceeding 50 dB. This performance level is facilitated by careful design of a low-loss integrated silicon nitride photonic circuit serving as the external cavity combined with commercially available semiconductor gain chips. This approach demonstrates the feasibility of compact integrated lasers with sub-kHz linewidth centering on the needs of emerging sensor concepts based on ultracold atoms and can be further extended to shorter wavelengths via selection of suitable semiconductor gain media.

physics.optics↗

arXiv2024

Battery-operated mid-infrared diode laser frequency combs

Mid-wave infrared (MIR, 3--5 $μ$m) optical frequency combs (OFC) are of critical importance for spectroscopy of fundamental molecular absorption features in space and terrestrial applications. Although in this band OFCs can be obtained via supercontinuum or difference frequency generation using optical pumping schemes, unprecedented source miniaturization and monolithic design are unique to electrically-pumped semiconductor laser structures. To date, high-brightness OFC generation in this region has been demonstrated in quantum- and interband cascade lasers (QCL/ICL), yet with sub-optimal spectral properties. Here, we show a MIR quantum well diode laser (QWDL) OFC, whose excellent spectral uniformity, narrow optical linewidths, and milliwatt optical power are obtained at a fraction of a watt of power consumption. The continuously tunable source offers ~1 THz of optical span centered at 3.04 $μ$m, and a repetition rate of 10 GHz. As a proof-of-principle, we show a directly-battery-operated MIR dual-comb source with almost 0.5 THz of optical coverage accessible in the electrical domain in microseconds. These results indicate the high suitability of QWDL OFCs for future chip-based real-time sensing systems in the mid-infrared.

physics.optics↗

arXiv2023

Dual Purpose Lyot Coronagraph Masks for Simultaneous High-Contrast Imaging and High-Resolution Wavefront Sensing

Directly imaging Earth-sized exoplanets with a visible-light coronagraph instrument on a space telescope will require a system that can achieve $\sim10^{-10}$ raw contrast and maintain it for the duration of observations (on the order of hours or more). We are designing, manufacturing, and testing Dual Purpose Lyot coronagraph (DPLC) masks that allow for simultaneous wavefront sensing and control using out-of-band light to maintain high contrast in the science focal plane. Our initial design uses a tiered metallic focal plane occulter to suppress starlight in the transmitted coronagraph channel and a dichroic-coated substrate to reflect out-of-band light to a wavefront sensing camera. The occulter design introduces a phase shift such that the reflected channel is a Zernike wavefront sensor. The dichroic coating allows higher-order wavefront errors to be detected which is especially critical for compensating for residual drifts from an actively-controlled segmented primary mirror. A second-generation design concept includes a metasurface to create polarization-dependent phase shifts in the reflected beam, which has several advantages including an extended dynamic range. We will present the focal plane mask designs, characterization, and initial testing at NASA's High Contrast Imaging Testbed (HCIT) facility.

astro-ph.IM↗

arXiv2023

Sub-nominal resolution Fourier transform spectrometry with chip-based combs

Chip-based optical frequency combs address the demand for compact, bright, coherent light sources of equidistant phase-locked lines. Traditionally, the Fourier Transform Spectroscopy (FTS) technique has been considered a suboptimal choice for resolving comb lines in chip-based sensing applications due to the requirement of long optical delays, and spectral distortion from the instrumental line shape. Here, we develop a sub-nominal resolution FTS technique that precisely extracts the comb's offset frequency in any spectral region directly from the measured interferogram without resorting to nonlinear $f$-to-$2f$ interferometry. This in turn enables MHz-resolution spectrometry with millimeter optical retardations. Low-pressure MHz-wide absorption lines probed by widely-tunable chip-scale mid-infrared OFCs with electrical pumping are fully resolved over a span of tens of nanometers. This versatile technique paves the way for compact, electrostatically-actuated, or even all-on-chip high-fidelity FTS, and can be readily applied to boost the resolution of existing commercial instruments several hundred times.

physics.optics↗

arXiv2021

Cavity-Enhanced Vernier Spectroscopy with a Chip-Scale Mid-Infrared Frequency Comb

Chip-scale optical frequency combs can provide broadband spectroscopy for diagnosing complex organic molecules. They are also promising as miniaturized laser spectrometers in applications ranging from atmospheric chemistry to geological science and the search for extraterrestrial life. While optical cavities are commonly used to boost sensitivity, it is challenging to realize a compact cavity-enhanced comb-based spectrometer. Here, we apply the Vernier technique to free-running operation of an interband cascade laser frequency comb in a simple linear geometry that performs cavity-enhanced chemical sensing. A centimeter-scale high-finesse cavity simultaneously provides selective mode filtering and enhancement of the path length to 30 meters. As a proof-of-concept, we sense transient open-path releases of ppm-level difluoroethane with 2 ms temporal resolution over a 1 THz optical bandwidth centered at 3.64 $μ$m.

physics.optics↗

arXiv2018

Mid-infrared dual-comb spectroscopy with low drive-power on-chip sources

Two semiconductor optical frequency combs consuming less than 1 W of electrical power are used to demonstrate high-sensitivity mid-infrared dual-comb spectroscopy in the important 3-4 $μ$m spectral region. The devices are 4 millimeters long by 4 microns wide, and each emits 8 mW of average optical power. The spectroscopic sensing performance is demonstrated by measurements of methane and hydrogen chloride with a spectral coverage of 33 cm$^{-1}$ (1 THz), 0.32 cm$^{-1}$ (9.7 GHz) frequency sampling interval, and peak signal-to-noise ratio of ~100 at 100 $μ$s integration time. The monolithic design, low drive power, and direct generation of mid-infrared radiation are highly attractive for portable broadband spectroscopic instrumentation in future terrestrial and space applications.

physics.ins-det↗

arXiv2015

Efficient Dielectric Metasurface Collimating Lenses for Mid-Infrared Quantum Cascade Lasers

Light emitted from single-mode semiconductor lasers generally has large divergence angles, and high numerical aperture lenses are required for beam collimation. Visible and near infrared lasers are collimated using aspheric glass or plastic lenses, yet collimation of mid-infrared quantum cascade lasers typically requires more costly aspheric lenses made of germanium, chalcogenide compounds, or other infrared-transparent materials. Here we report mid-infrared dielectric metasurface flat lenses that efficiently collimate the output beam of single-mode quantum cascade lasers. The metasurface lenses are composed of amorphous silicon posts on a flat sapphire substrate and can be fabricated at low cost using a single step conventional UV binary lithography. Mid-infrared radiation from a 4.8 $μ$m distributed-feedback quantum cascade laser is collimated using a polarization insensitive metasurface lens with 0.86 numerical aperture and 79% transmission efficiency. The collimated beam has a half divergence angle of 0.36$^\circ$ and beam quality factor of $M^2$=1.02.

physics.optics↗

arXiv2015

Dielectric Metasurfaces for Complete Control of Phase and Polarization with Subwavelength Spatial Resolution and High Transmission

Metasurfaces are planar structures that locally modify the polarization, phase, and amplitude of light in reflection or transmission, thus enabling lithographically patterned flat optical components with functionalities controlled by design. Transmissive metasurfaces are especially important, as most optical systems used in practice operate in transmission. Several types of transmissive metasurfaces have been realized, but with either low transmission efficiencies or limited control over polarization and phase. Here we show a metasurface platform based on high-contrast dielectric elliptical nano-posts which provides complete control of polarization and phase with sub-wavelength spatial resolution and experimentally measured efficiency ranging from 72% to 97%, depending on the exact design. Such complete control enables the realization of most free-space transmissive optical elements such as lenses, phase-plates, wave-plates, polarizers, beam-splitters, as well as polarization switchable phase holograms and arbitrary vector beam generators using the same metamaterial platform.

physics.optics↗

arXiv2014

Subwavelength-thick Lenses with High Numerical Apertures and Large Efficiency Based on High Contrast Transmitarrays

We report subwavelength-thick, polarization insensitive micro-lenses operating at telecom wavelength with focal spots as small as 0.57 wavelengths and measured focusing efficiency up to 82%. The lens design is based on high contrast transmitarrays that enable control of optical phase fronts with subwavelength spatial resolution. A rigorous method for ultra-thin lens design, and the trade-off between high efficiency and small spot size (or large numerical aperture) are discussed. The transmitarrays, composed of silicon nano-posts on glass, could be fabricated by high-throughput photo or nanoimprint lithography, thus enabling widespread adoption.

physics.optics↗

arXiv2013

Photonic Cavity Synchronization of Nanomechanical Oscillators

Synchronization in oscillatory systems is a frequent natural phenomenon and is becoming an important concept in modern physics. Nanomechanical resonators are ideal systems for studying synchronization due to their controllable oscillation properties and engineerable nonlinearities. Here we demonstrate synchronization of two nanomechanical oscillators via a photonic resonator, enabling optomechanical synchronization between mechanically isolated nanomechanical resonators. Optical backaction gives rise to both reactive and dissipative coupling of the mechanical resonators, leading to coherent oscillation and mutual locking of resonators with dynamics beyond the widely accepted phase oscillator (Kuramoto) model. Besides the phase difference between the oscillators, also their amplitudes are coupled, resulting in the emergence of sidebands around the synchronized carrier signal.

physics.optics↗

arXiv2011

Dynamic manipulation of mechanical resonators in the high amplitude regime through optical backaction

Cavity optomechanics enables active manipulation of mechanical resonators through backaction cooling and amplification. This ability to control mechanical motion with retarded optical forces has recently spurred a race towards realizing a mechanical resonator in its quantum ground state. Here, instead of quenching optomechanical motion, we demonstrate high amplitude operation of nanomechanical resonators by utilizing a highly efficient phonon generation process. In this regime, the nanomechanical resonators gain sufficient energy from the optical field to overcome the large energy barrier of a double well potential, leading to nanomechanical slow-down and zero frequency singularity, as predicted by early theories . Besides fundamental studies and interests in parametric amplification of small forces, optomechanical backaction is also projected to open new windows for studying discrete mechanical states, and to foster applications. Here we realize a non-volatile mechanical memory element, in which bits are written and reset via optomechanical backaction by controlling the mechanical damping across the barrier. Our study casts a new perspective on the energy dynamics in coupled mechanical resonator - cavity systems and enables novel functional devices that utilize the principles of cavity optomechanics.

physics.optics↗