arXiv subjects

Maik Butterling

Publications and source records attributed to Maik Butterling.

15 recordsLinked to original sources

arXiv2026

Carrier Localization in Pnictogen-Based Chalcohalides from Defect-Bound Hot Polarons

Pnictogen-based solar absorbers have gained prominence as promising nontoxic and stable alternatives to lead-halide perovskites (LHPs), but are severely limited by carrier localization, preventing their performance from approaching those of LHPs. Recent efforts have uncovered routes to overcome carrier localization, but these early efforts only considered intrinsic factors. Herein, we push beyond these limited early efforts, examining the role of defects, not only on cold carriers but also hot carriers. Focusing on the structurally one-dimensional pnictogen chalcohalide BiSBr, we find that whilst this material intrinsically does not exhibit carrier localization, vacancies introduced during synthesis or post-treatment lead to pronounced extrinsic self-trapping via the formation of defect-bound hot polarons-excited charge-carriers strongly coupled to local defect-induced vibrational modes. These above-gap defect states divert hot carriers from cooling to the band edge, thus depleting the mobile carrier population. Our findings establish the key role of defect-bound hot polarons in mediating extrinsic localization and offer new mechanistic insights into the interplay between defects, lattice coupling, and excited-state charge-carrier transport, which are critical to designing efficient perovskite-inspired solar absorbers.

cond-mat.mtrl-sci↗

arXiv2025

Defect analysis of the $\beta$- to $\gamma$-Ga$_{2}$O$_{3}$ phase transition

In this study, we investigate the ion-irradiation-induced phase transition in gallium oxide (Ga2O3) from the $\beta$ to the $\gamma$ phase, the role of defects during the transformation, and the quality of the resulting crystal structure. Using a multi-method analysis approach including X-ray diffraction (XRD), transmission electron microscopy (TEM), Rutherford backscattering spectrometry in channeling mode (RBS/c), Doppler broadening variable energy positron annihilation spectroscopy (DB-VEPAS) and variable energy positron annihilation lifetime spectroscopy (VEPALS) supported by density functional theory (DFT) calculations, we have characterized defects at all the relevant stages before, during, and after the phase transition. Reduction in backscattering yield was observed in RBS/c spectra after the transition to the $\gamma$ phase. This is corroborated by a significant decrease in the positron trapping center density due to generation of embedded vacancies intrinsic for the $\gamma$-Ga2O3 but too shallow in order to trap positrons. A comparison of the observed positron lifetime of $\gamma$-Ga2O3 with different theoretical models shows good agreement with the three-site $\gamma$ phase approach. A characteristic increase in the effective positron diffusion length and the positron lifetime at the transition point from $\beta$-Ga2O3 to $\gamma$-Ga2O3 enables visualization of the phase transition with positrons for the first time. Moreover, a subsequent reduction of these quantities with increasing irradiation fluence was observed, which we attribute to further evolution of the $\gamma$-Ga2O3 and changes in the gallium vacancy density as well as relative occupation in the crystal lattice.

cond-mat.mtrl-sci↗

arXiv2024

Ge epitaxy at ultra-low growth temperatures enabled by a pristine growth environment

Germanium (Ge), the next-in-line group-IV material, bears great potential to add functionality and performance to next-generation nanoelectronics and solid-state quantum transport based on silicon (Si) technology. Here, we investigate the direct epitaxial growth of two-dimensional high-quality crystalline Ge layers on Si deposited at ultra-low growth temperatures ($T_{Ge} = 100^{\circ}\mathrm{C}-350^{\circ}\mathrm{C}$) and pristine growth pressures ($\lesssim 10^{-10}\,\mathrm{mbar}$). First, we show that $T_{Ge}$ does not degrade the crystal quality of homoepitaxial Ge/Ge(001) by comparing the point defect density using positron annihilation lifetime spectroscopy. Subsequently, we present a systematic investigation of the Ge/Si(001) heteroepitaxy, varying the Ge coverage (${\theta}_{Ge}$, 1, 2, 4, 8, 12, and 16 nm) and $T_{Ge}$ ($100^{\circ}\mathrm{C}$ to $300^{\circ}\mathrm{C}$, in increments of $50^{\circ}\mathrm{C}$) to assess the influence of these parameters on the layer's structural quality. Atomic force microscopy revealed a rippled surface topography with superimposed grainy features and the absence of three-dimensional structures, such as quantum dots. Transmission electron microscopy unveiled pseudomorphic, grains of highly crystalline growth separated by defective domains. Thanks to nanobeam scanning x-ray diffraction measurements, we were able to evidence the lattice strain fluctuations due to the ripple-like structure of the layers. We conclude that the heteroepitaxial strain contributes to the formation of the ripples, which originate from the kinetic limitations of the ultra-low temperatures.

cond-mat.mtrl-sci↗

arXiv2024

Spatially-resolved charge detectors for particle beam optimization with femtoampere resolution achieved by in-vacuum signal preamplification

We present the design of a Faraday cup-like charged particle detector in a four quadrant configuration aimed at facilitating the alignment of low-intensity beams of exotic particles. The device is capable of assessing the current on the electrodes with a resolution of 33fA within 15ms or a maximal resolution of 1.8fA with a measurement time of 12.4s. This performance is achieved by minimizing the noise through a preamplification circuit installed in vacuum, as close as possible to the electrodes. We tested the detector with the positron beam of ELBE, achieving the nominal maximum resolution with high reproducibility. We then exploited the capabilities of the detector to resolve the two-dimensional shape of the beam, and revealed the presence of a weak electron beam being transported alongside the positrons. Characterization of the detector performance showed that in a variety of scenarios it can be used to quickly center positron beams thus allowing for the prompt optimization of beam transport.

physics.ins-det↗

arXiv2023

Insights into the LiMn2O4 Cathode Stability in Aqueous Electrolyte

LiMn2O4 (LMO), cathodes present large stability when cycled in aqueous electrolytes, contrasting its behavior in conventional organic electrolytes in Lithium-ion batteries (LIBs). To elucidate the mechanisms underlying this distinctive behavior, we employ unconventional characterization techniques, including Variable Energy Positron Annihilation Lifetime Spectroscopy (VEPALS), Tip-Enhanced Raman Spectroscopy (TERS) and macro-Raman Spectroscopy (with mm-size laser spot). These still rather unexplored techniques in the battery field provide complementary information across different length scales, revealing previously hidden features. VEPALS offers atomic-scale insights, uncovering cationic defects and sub-nanometer pores that tend to collapse with cycling. TERS, operating at the nanometric range at the surface, captured the presence of Mn3O4 and its dissolution with cycling, elucidating dynamic changes during operation. Additionally, TERS highlights SO42- accumulation at grain boundaries. Macro-Raman Spectroscopy focuses on the micrometer scale, depicting small changes in the cathode's long-range order, suggesting a slow but progressive loss of crystalline quality under operation. Integrating these techniques provides a comprehensive assessment of LMO cathode stability in aqueous electrolytes, offering multifaceted insights into phase and defect evolution that can help to rationalize the origin of such stability when compared to conventional organic electrolytes. Our findings advance the understanding of LMO behavior in aqueous environments and provide guidelines for its development for next-generation LIBs.

cond-mat.mtrl-sci↗

arXiv2023

Ion Intercalation in Lanthanum Strontium Ferrite for Aqueous Electrochemical Energy Storage Devices

Ion intercalation of perovskite oxides in liquid electrolytes is a very promising method for controlling their functional properties while storing charge, which opens the potential application in different energy and information technologies. Although the role of defect chemistry in the oxygen intercalation in a gaseous environment is well established, the mechanism of ion intercalation in liquid electrolytes at room temperature is poorly understood. In this study, the defect chemistry during ion intercalation of La0.5Sr0.5FeO3-δ thin films in alkaline electrolytes is studied. Oxygen and proton intercalation into the LSF perovskite structure is observed at moderate electrochemical potentials (0.5 V to -0.4 V), giving rise to a change in the oxidation state of Fe (as a charge compensation mechanism). The variation of the concentration of holes as a function of the intercalation potential was characterized by in-situ ellipsometry and the concentration of electron holes was indirectly quantified for different electrochemical potentials. Finally, a dilute defect chemistry model that describes the variation of defect species during ionic intercalation was developed.

cond-mat.mtrl-sci↗

arXiv2021

Mapping the Structure of Oxygen-Doped Wurtzite Aluminum Nitride Coatings From Ab Initio Random Structure Search and Experiments

Machine learning is changing how we design and interpret experiments in materials science. In this work, we show how unsupervised learning, combined with ab initio modeling, improves our understanding of structural metastability in multicomponent alloys. We use the example case of Al-O-N alloys where the formation of aluminum vacancies in wurtzite AlN upon the incorporation of substitutional oxygen can be seen as a general mechanism of solids where crystal symmetry is reduced to stabilize defects. The ideal AlN wurtzite crystal structure occupation cannot be matched due to the presence of an aliovalent hetero-element into the structure. The traditional interpretation of the c-lattice shrinkage in sputter-deposited Al-O-N films from X-ray diffraction (XRD) experiments suggests the existence of a solubility limit at 8at.% oxygen content. Here we show that such naive interpretation is misleading. We support XRD data with a machine learning analysis of ab initio simulations and positron annihilation lifetime spectroscopy data, revealing no signs of a possible solubility limit. Instead, the presence of a wide range of non-equilibrium oxygen-rich defective structures emerging at increasing oxygen contents suggests that the formation of grain boundaries is the most plausible mechanism responsible for the lattice shrinkage measured in Al-O-N sputtered films.

cond-mat.mtrl-sci↗

arXiv2020

Dissolution of donor-vacancy clusters in heavily doped n-type germanium

The n-type doping of Ge is a self-limiting process due to the formation of vacancy-donor complexes (DnV with n <= 4) that deactivate the donors. This work unambiguously demonstrates that the dissolution of the dominating P4V clusters in heavily phosphorus-doped Ge epilayers can be achieved by millisecond-flash lamp annealing at about 1050 K. The P4V cluster dissolution increases the carrier concentration by more than three-fold together with a suppression of phosphorus diffusion. Electrochemical capacitance-voltage measurements in conjunction with secondary ion mass spectrometry, positron annihilation lifetime spectroscopy and theoretical calculations enabled us to address and understand a fundamental problem that has hindered so far the full integration of Ge with complementary-metal-oxide-semiconductor technology.

cond-mat.mtrl-sci↗

arXiv2020

Vacancy-Hydrogen Interaction in Niobium during Low-Temperature Baking

A recently discovered modified low-temperature baking leads to reduced surface losses and an increase of the accelerating gradient of superconducting TESLA shape cavities. We will show that the dynamics of vacancy-hydrogen complexes at low-temperature baking lead to a suppression of lossy nanohydrides at 2\,K and thus a significant enhancement of accelerator performance. Utilizing Doppler broadening Positron Annihilation Spectroscopy, Positron Annihilation Lifetime Spectroscopy and instrumented nanoindentation, samples made from European XFEL niobium sheets were investigated. We studied the evolution of vacancies in bulk samples and in the sub-surface region and their interaction with hydrogen at different temperature levels during {\it in-situ} and {\it ex-situ} annealing.

cond-mat.supr-con↗

arXiv2020

Nitrogen magneto-ionics

So far, magneto-ionics, understood as voltage-driven ion transport in magnetic materials, has largely relied on controlled migration of oxygen ion/vacancy and, to a lesser extent, lithium and hydrogen. Here, we demonstrate efficient, room-temperature, voltage-driven nitrogen transport (i.e., nitrogen magneto-ionics) by electrolyte-gating of a single CoN film (without an ion-reservoir layer). Nitrogen magneto-ionics in CoN is compared to oxygen magneto-ionics in Co3O4, both layers showing a nanocrystalline face-centered-cubic structure and reversible voltage-driven ON-OFF ferromagnetism. In contrast to oxygen, nitrogen transport occurs uniformly creating a plane-wave-like migration front, without assistance of diffusion channels. Nitrogen magneto-ionics requires lower threshold voltages and exhibits enhanced rates and cyclability. This is due to the lower activation energy for ion diffusion and the lower electronegativity of nitrogen compared to oxygen. These results are appealing for the use of magneto-ionics in nitride semiconductor devices, in applications requiring endurance and moderate speeds of operation, such as brain-inspired computing.

cond-mat.mtrl-sci↗

arXiv2020

Boosting room temperature magneto-ionics in Co3O4

Voltage control of magnetism through electric field-induced oxygen motion (magneto-ionics) could represent a significant breakthrough in the pursuit for new strategies to enhance energy efficiency in a large variety of magnetic devices, such as magnetic micro-electro-mechanical systems (MEMS), magnetic logics, spin electronics, or neuromorphic computing, i.e., envisaging ultra-low power emulation of the biological synapse. Boosting the induced changes in magnetization, magneto-ionic motion and cyclability (endurance) continue to be key challenges to turn magneto-ionic phenomena into real applications. Here, we demonstrate that, without degrading cyclability, room temperature magneto-ionic motion in electrolyte-gated paramagnetic and fairly thick (> 100 nm) Co3O4 films largely depends on the configuration used to apply the electric field. In particular, magneto-ionic effects are significantly increased both in terms of generated magnetization (6 times larger: from 118.5 to 699.2 emu cm-3) and speed (35 times faster: from 33.1 to 1170.8 emu cm-3 h-1) if the electric field is applied across a conducting buffer layer (grown underneath the Co3O4 films), instead of directly contacting Co3O4. This is attributed to a greater uniformity and strength of the applied electric field when using the conducting layer. These results may trigger the use of oxygen magneto-ionics into promising new technologies, such as magnetic MEMS or brain-inspired computing, which require endurance and moderate speeds of operation.

cond-mat.mtrl-sci↗

arXiv2019

Chemical manipulation of hydrogen induced high p-type and n-type conductivity in Ga2O3

Advancement of optoelectronic and high-power devices is tied to the development of wide band gap materials with excellent transport properties. However, bipolar doping (n-type and p-type doping) and realizing high carrier density while maintaining good mobility have been big challenges in wide band gap materials. Here P-type and n-type conductivity was introduced in beta-Ga2O3, an ultra-wide band gap oxide, by controlling hydrogen incorporation in the lattice without further doping. Hydrogen induced a 9-order of magnitude increase of n-type conductivity with donor ionization energy of 20 meV and resistivity of 10-4 Ohm.cm. The conductivity was switched to p-type with acceptor ionization energy of 42 meV by altering hydrogen incorporation in the lattice. Density functional theory calculations were used to examine hydrogen location in the Ga2O3 lattice and identified a new donor type as the source of this remarkable n-type conductivity. Positron annihilation spectroscopy confirmed this finding and the interpretation of the results. This work illustrates a new approach that allows a tunable and reversible way of modifying the conductivity of semiconductors and it is expected to have profound implications on semiconductor field. At the same time it demonstrates for the first time p-type and remarkable n-type conductivity in Ga2O3 which should usher in the development of Ga2O3 devices and advance optoelectronics and high-power devices

cond-mat.mtrl-sci↗

arXiv2019

Vacancy complexes in nonequilibrium germanium-tin semiconductors

Understanding the nature and behavior of vacancy-like defects in epitaxial GeSn metastable alloys is crucial to elucidate the structural and optoelectronic properties of these emerging semiconductors. The formation of vacancies and their complexes is expected to be promoted by the relatively low substrate temperature required for the epitaxial growth of GeSn layers with Sn contents significantly above the equilibrium solubility of 1 at.%. These defects can impact both the microstructure and charge carrier lifetime. Herein, to identify the vacancy-related complexes and probe their evolution as a function of Sn content, depth-profiled pulsed low-energy positron annihilation lifetime spectroscopy and Doppler broadening spectroscopy were combined to investigate GeSn epitaxial layers with Sn content in the 6.5-13.0 at.% range. The samples were grown by chemical vapor deposition method at temperatures between 300 and 330 °C. Regardless of the Sn content, all GeSn samples showed the same depth-dependent increase in the positron annihilation line broadening parameters, which confirmed the presence of open volume defects. The measured average positron lifetimes were the highest (380-395 ps) in the region near the surface and monotonically decrease across the analyzed thickness, but remain above 350 ps. All GeSn layers exhibit lifetimes that are 85 to 110 ps higher than the Ge reference layers. Surprisingly, these lifetimes were found to decrease as Sn content increases in GeSn layers. These measurements indicate that divacancies are the dominant defect in the as-grown GeSn layers. However, their corresponding lifetime was found to be shorter than in epitaxial Ge thus suggesting that the presence of Sn may alter the structure of divacancies. Additionally, GeSn layers were found to also contain a small fraction of vacancy clusters, which become less important as Sn content increases.

physics.app-ph↗

arXiv2018

Nature of the positron state in CdSe quantum dots

Previous studies have shown that positron-annihilation spectroscopy is a highly sensitive probe of the electronic structure and surface composition of ligand-capped semiconductor Quantum Dots (QDs) embedded in thin films. Nature of the associated positron state, however, whether the positron is confined inside the QDs or localized at their surfaces, has so far remained unresolved. Our positron-annihilation lifetime spectroscopy (PALS) studies of CdSe QDs reveal the presence of a strong lifetime component in the narrow range of 358-371 ps, indicating abundant trapping and annihilation of positrons at the surfaces of the QDs. Furthermore, our ab-initio calculations of the positron wave function and lifetime employing a recent formulation of the Weighted Density Approximation (WDA) demonstrate the presence of a positron surface state and predict positron lifetimes close to experimental values. Our study thus resolves the longstanding question regarding the nature of the positron state in semiconductor QDs, and opens the way to extract quantitative information on surface composition and ligand-surface interactions of colloidal semiconductor QDs through highly sensitive positron-annihilation techniques.

cond-mat.mes-hall↗

arXiv2016

Positron spectroscopy of point defects in the skyrmion-lattice compound MnSi

Outstanding crystalline perfection is a key requirement for the formation of new forms of electronic order in a vast number of widely different materials. Whereas excellent sample quality represents a standard claim in the literature, there are, quite generally, no reliable microscopic probes to establish the nature and concentration of lattice defects such as voids, dislocations and different species of point defects on the level relevant to the length and energy scales inherent to these new forms of order. Here we report an experimental study of the archetypical skyrmion-lattice compound MnSi, where we relate the characteristic types of point defects and their concentration to the magnetic properties by combining different types of positron spectroscopy with ab-initio calculations and bulk measurements. We find that Mn antisite disorder broadens the magnetic phase transitions and lowers their critical temperatures, whereas the skyrmion lattice phase forms for all samples studied underlining the robustness of this topologically non-trivial state. Taken together, this demonstrates the unprecedented sensitivity of positron spectroscopy in studies of new forms of electronic order.

cond-mat.str-el↗