arXiv subjects

Maika Takita

Publications and source records attributed to Maika Takita.

At least 19 recordsLinked to original sources

arXiv2026

Resilience Beyond the Light Cone: Error-Detected Primitives for Practical Dynamic Circuits

Dynamic circuits, which augment unitary operations with mid-circuit measurements and classical feedforward, can generate long-range entanglement in constant depth, enabling low-depth primitives ranging from nontrivial state preparation to many-qubit entangling gates. Escaping the light-cone constraints of unitary circuits, however, comes at a cost: these primitives typically require a number of mid-circuit measurements that scales with system size and that, together with feedforward latency, can introduce errors that degrade the long-range entanglement they rely on. Here, we alleviate this tension by showing that many such primitives, when cast into a common framework, admit an error-detection scheme that trades infidelity for postselection overhead with no additional ancillas. Our framework thus unifies and upgrades a broad class of primitives including fan-out gates, multi-qubit Pauli rotations, the preparation of W and higher-weight Dicke states, and certain non-normal matrix product states. We also introduce a reduced-depth, error-detected implementation of the Hadamard test, extending the use cases of dynamic circuits to a key algorithmic primitive. Finally, we establish the practical utility of our scheme through experiments on a superconducting quantum processor. We demonstrate the error-detected preparation of a long-range entangled Bell pair spanning a 100-qubit chain with fidelity $F=0.59\pm0.02$, surpassing the entanglement-certification threshold $F>0.5$ that the baseline dynamic-circuit implementation fails to reach ($0.39\pm0.01$). Separately, we demonstrate constant-depth preparation of W states of up to 20 qubits by consuming GHZ states of up to 40 qubits, finding absolute fidelity improvements of $ΔF\approx 0.2$ across the largest sizes studied. Altogether, these results bring low-depth dynamic-circuit primitives within practical reach on present-day hardware.

quant-ph↗

arXiv2026

Observable Estimation in the Absence of Classical Verification

The predictive success of quantum mechanics underpins many areas of modern science, even as the exact simulation of large, interacting quantum systems remains beyond the reach of classical computation. This success has been enabled by the remarkable advancement of scalable numerical approximation methods, which often demonstrate practical accuracy despite the absence of formal guarantees. As quantum simulation pushes into regimes where these approximations struggle, a fundamental challenge arises: How can quantum outcomes be trusted when reliable classical benchmarks are unavailable? Here, we establish a framework for the independent validation of quantum estimates in this setting and present evidence that they provide the most credible result among several considered methods, in the absence of an immediately accessible ground-truth solution. We apply our framework to the semi-scrambling dynamics of a physical model that strains several leading classical simulation methods yet remains experimentally accessible, in part through our introduction of the \textit{operator Loschmidt echo}. We systematically design a series of experiments using quantum heuristics that, taken together, test the underlying assumptions and provide strong confidence in the observable estimates obtained from the quantum computer. We then show how this framework can be extended to place accuracy bounds on quantum estimates via careful characterization and manipulation of the device noise, transforming the problem of validating the observable estimation to validating the noise model. These results establish a route towards trusted quantum computation for scientific discovery, independent of classical verification.

quant-ph↗

arXiv2025

Big cats: entanglement in 120 qubits and beyond

Entanglement is the quintessential quantum phenomenon and a key enabler of quantum algorithms. The ability to faithfully entangle many distinct particles is often used as a benchmark for the quality of hardware and control in a quantum computer. Greenberger-Horne-Zeilinger (GHZ) states, also known as Schrödinger cat states, are useful for this task. They are easy to verify, but difficult to prepare due to their high sensitivity to noise. In this Letter we report on the largest GHZ state prepared to date consisting of 120 superconducting qubits. We do this via a combination of optimized compilation, low-overhead error detection and temporary uncomputation. We use an automated compiler to maximize error-detection in state preparation circuits subject to arbitrary qubit connectivity constraints and variations in error rates. We measure a GHZ fidelity of 0.56(3) with a post-selection rate of 28%. We certify the fidelity of our GHZ states using multiple methods and show that they are all equivalent, albeit with different practical considerations.

quant-ph↗

arXiv2025

Order from chaos with adaptive circuits on quantum hardware

Programmable quantum devices provide a platform to control the coherent dynamics of quantum wavefunctions. Here we experimentally realize adaptive monitored quantum circuits, which incorporate conditional feedback into non-unitary evolution, to control quantum chaotic dynamics using a combination of local mid-circuit measurements and resets. The experiments are performed with an IBM superconducting quantum processor using up to 100 qubits that samples a quantum version of the classically chaotic Bernoulli map. This map scrambles quantum information, while local measurements and feedback attempt to steer the dynamics toward a state that is a fixed point of the map. This competition drives a dynamical phase transition between quantum and classical dynamics that we observe experimentally and describe theoretically using noisy simulations, matrix product states, and mappings to statistical mechanics models. Estimates of the universal critical properties are obtained to high accuracy on the quantum computer thanks to the large number of qubits utilized in the calculation. By successfully applying up to nearly 5000 entangling gates and 5000 non-unitary mid-circuit operations on systems up to 100 qubits, this experiment serves as a signpost on the route towards fault tolerance.

quant-ph↗

arXiv2025

Chemistry Beyond the Scale of Exact Diagonalization on a Quantum-Centric Supercomputer

A universal quantum computer can simulate diverse quantum systems, with electronic structure for chemistry offering challenging problems for practical use cases around the hundred-qubit mark. While current quantum processors have reached this size, deep circuits and large number of measurements lead to prohibitive runtimes for quantum computers in isolation. Here, we demonstrate the use of classical distributed computing to offload all but an intrinsically quantum component of a workflow for electronic structure simulations. Using a Heron superconducting processor and the supercomputer Fugaku, we simulate the ground-state dissociation of N$_2$ and the [2Fe-2S] and [4Fe-4S] clusters, with circuits up to 77 qubits and 10,570 gates. The proposed algorithm processes quantum samples to produce upper bounds for the ground-state energy and sparse approximations to the ground-state wavefunctions. Our results suggest that, for current error rates, a quantum-centric supercomputing architecture can tackle challenging chemistry problems beyond sizes amenable to exact diagonalization.

quant-ph↗

arXiv2025

Combining quantum processors with real-time classical communication

Quantum computers process information with the laws of quantum mechanics. Current quantum hardware is noisy, can only store information for a short time, and is limited to a few quantum bits, i.e., qubits, typically arranged in a planar connectivity. However, many applications of quantum computing require more connectivity than the planar lattice offered by the hardware on more qubits than is available on a single quantum processing unit (QPU). Here we overcome these limitations with error mitigated dynamic circuits and circuit-cutting to create quantum states requiring a periodic connectivity employing up to 142 qubits spanning multiple QPUs connected in real-time with a classical link. In a dynamic circuit, quantum gates can be classically controlled by the outcomes of mid-circuit measurements within run-time, i.e., within a fraction of the coherence time of the qubits. Our real-time classical link allows us to apply a quantum gate on one QPU conditioned on the outcome of a measurement on another QPU which enables a modular scaling of quantum hardware. Furthermore, the error mitigated control-flow enhances qubit connectivity and the instruction set of the hardware thus increasing the versatility of our quantum computers. Dynamic circuits and quantum modularity are thus key to scale quantum computers and make them useful.

quant-ph↗

arXiv2024

Encoding a magic state with beyond break-even fidelity

To run large-scale algorithms on a quantum computer, error-correcting codes must be able to perform a fundamental set of operations, called logic gates, while isolating the encoded information from noise~\cite{Harper2019,Ryan-Anderson2021,Egan2021fault, Chen2022calibrated, Sundaresan2022matching, ryananderson2022implementing, Postler2022demonstration, GoogleAI2023}. We can complete a universal set of logic gates by producing special resources called magic states~\cite{Bravyi2005universal,Maier2013magic, Chamberland2022building}. It is therefore important to produce high-fidelity magic states to conduct algorithms while introducing a minimal amount of noise to the computation. Here, we propose and implement a scheme to prepare a magic state on a superconducting qubit array using error correction. We find that our scheme produces better magic states than those we can prepare using the individual qubits of the device. This demonstrates a fundamental principle of fault-tolerant quantum computing~\cite{Shor96}, namely, that we can use error correction to improve the quality of logic gates with noisy qubits. Additionally, we show we can increase the yield of magic states using adaptive circuits, where circuit elements are changed depending on the outcome of mid-circuit measurements. This demonstrates an essential capability we will need for many error-correction subroutines. Our prototype will be invaluable in the future as it can reduce the number of physical qubits needed to produce high-fidelity magic states in large-scale quantum-computing architectures.

quant-ph↗

arXiv2023

Probabilistic error cancellation for dynamic quantum circuits

Probabilistic error cancellation (PEC) is a technique that generates error-mitigated estimates of expectation values from ensembles of quantum circuits. In this work we extend the application of PEC from unitary-only circuits to dynamic circuits with measurement-based operations, such as mid-circuit measurements and classically-controlled (feedforward) Clifford operations. Our approach extends the sparse Pauli-Lindblad noise model to measurement-based operations while accounting for non-local measurement crosstalk in superconducting processors. Our mitigation and monitoring experiments provide a holistic view for the performance of the protocols developed in this work. These capabilities will be a crucial tool in the exploration of near-term dynamic circuit applications.

quant-ph↗

arXiv2023

Three-qubit Parity Gate via Simultaneous Cross Resonance Drives

Native multi-qubit parity gates have various potential quantum computing applications, such as entanglement creation, logical state encoding and parity measurement in quantum error correction. Here, using simultaneous cross-resonance drives on two control qubits with a common target, we demonstrate an efficient implementation of a three-qubit parity gate. We have developed a calibration procedure based on the one for the echoed cross-resonance gate. We confirm that our use of simultaneous drives leads to higher interleaved randomized benchmarking fidelities than a naive implementation with two consecutive CNOT gates. We also demonstrate that our simultaneous parity gates can significantly improve the parity measurement error probability for the heavy-hexagon code on an IBM Quantum processor using seven superconducting qubits with all-microwave control.

quant-ph↗

arXiv2022

Matching and maximum likelihood decoding of a multi-round subsystem quantum error correction experiment

Quantum error correction offers a promising path for performing quantum computations with low errors. Although a fully fault-tolerant execution of a quantum algorithm remains unrealized, recent experimental developments, along with improvements in control electronics, are enabling increasingly advanced demonstrations of the necessary operations for applying quantum error correction. Here, we perform quantum error correction on superconducting qubits connected in a heavy-hexagon lattice. The full processor can encode a logical qubit with distance three and perform several rounds of fault-tolerant syndrome measurements that allow the correction of any single fault in the circuitry. Furthermore, by using dynamic circuits and classical computation as part of our syndrome extraction protocols, we can exploit real-time feedback to reduce the impact of energy relaxation error in the syndrome and flag qubits. We show that the logical error varies depending on the use of a perfect matching decoder compared to a maximum likelihood decoder. We observe a logical error per syndrome measurement round as low as $\sim0.04$ for the matching decoder and as low as $\sim0.03$ for the maximum likelihood decoder. Our results suggest that more significant improvements to decoders are likely on the horizon as quantum hardware has reached a new stage of development towards fully fault-tolerant operations.

quant-ph↗

arXiv2021

Calibrated decoders for experimental quantum error correction

Arbitrarily long quantum computations require quantum memories that can be repeatedly measured without being corrupted. Here, we preserve the state of a quantum memory, notably with the additional use of flagged error events. All error events were extracted using fast, mid-circuit measurements and resets of the physical qubits. Among the error decoders we considered, we introduce a perfect matching decoder that was calibrated from measurements containing up to size-4 correlated events. To compare the decoders, we used a partial post-selection scheme shown to retain ten times more data than full post-selection. We observed logical errors per round of $2.2\pm0.1\times10^{-2}$ (decoded without post-selection) and $5.1\pm0.7\times10^{-4}$ (full post-selection), which was less than the physical measurement error of $7\times10^{-3}$ and therefore surpasses a pseudo-threshold for repeated logical measurements.

quant-ph↗

arXiv2021

Circuit quantum electrodynamics (cQED) with modular quasi-lumped models

Extracting the Hamiltonian of interacting quantum-information processing systems is a keystone problem in the realization of complex phenomena and large-scale quantum computers. The remarkable growth of the field increasingly requires precise, widely-applicable, and modular methods that can model the quantum electrodynamics of the physical circuits, and even of their more-subtle renormalization effects. Here, we present a computationally-efficient method satisfying these criteria. The method partitions a quantum device into compact lumped or quasi-distributed cells. Each is first simulated individually. The composite system is then reduced and mapped to a set of simple subsystem building blocks and their pairwise interactions. The method operates within the quasi-lumped approximation and, with no further approximation, systematically accounts for constraints, couplings, parameter renormalizations, and non-perturbative loading effects. We experimentally validate the method on large-scale, state-of-the-art superconducting quantum processors. We find that the full method improves the experimental agreement by a factor of two over taking standard coupling approximations when tested on the most sensitive and dressed Hamiltonian parameters of the measured devices.

quant-ph↗

arXiv2021

Exploiting dynamic quantum circuits in a quantum algorithm with superconducting qubits

The execution of quantum circuits on real systems has largely been limited to those which are simply time-ordered sequences of unitary operations followed by a projective measurement. As hardware platforms for quantum computing continue to mature in size and capability, it is imperative to enable quantum circuits beyond their conventional construction. Here we break into the realm of dynamic quantum circuits on a superconducting-based quantum system. Dynamic quantum circuits involve not only the evolution of the quantum state throughout the computation, but also periodic measurements of a subset of qubits mid-circuit and concurrent processing of the resulting classical information within timescales shorter than the execution times of the circuits. Using noisy quantum hardware, we explore one of the most fundamental quantum algorithms, quantum phase estimation, in its adaptive version, which exploits dynamic circuits, and compare the results to a non-adaptive implementation of the same algorithm. We demonstrate that the version of real-time quantum computing with dynamic circuits can offer a substantial and tangible advantage when noise and latency are sufficiently low in the system, opening the door to a new realm of available algorithms on real quantum systems.

quant-ph↗

arXiv2017

Hardware-efficient Variational Quantum Eigensolver for Small Molecules and Quantum Magnets

Quantum computers can be used to address molecular structure, materials science and condensed matter physics problems, which currently stretch the limits of existing high-performance computing resources. Finding exact numerical solutions to these interacting fermion problems has exponential cost, while Monte Carlo methods are plagued by the fermionic sign problem. These limitations of classical computational methods have made even few-atom molecular structures problems of practical interest for medium-sized quantum computers. Yet, thus far experimental implementations have been restricted to molecules involving only Period I elements. Here, we demonstrate the experimental optimization of up to six-qubit Hamiltonian problems with over a hundred Pauli terms, determining the ground state energy for molecules of increasing size, up to BeH2. This is enabled by a hardware-efficient variational quantum eigensolver with trial states specifically tailored to the available interactions in our quantum processor, combined with a compact encoding of fermionic Hamiltonians and a robust stochastic optimization routine. We further demonstrate the flexibility of our approach by applying the technique to a problem of quantum magnetism. Across all studied problems, we find agreement between experiment and numerical simulations with a noisy model of the device. These results help elucidate the requirements for scaling the method to larger systems, and aim at bridging the gap between problems at the forefront of high-performance computing and their implementation on quantum hardware.

quant-ph↗

arXiv2017

Experimental demonstration of fault-tolerant state preparation with superconducting qubits

Robust quantum computation requires encoding delicate quantum information into degrees of freedom that are hard for the environment to change. Quantum encodings have been demonstrated in many physical systems by observing and correcting storage errors, but applications require not just storing information; we must accurately compute even with faulty operations. The theory of fault-tolerant quantum computing illuminates a way forward by providing a foundation and collection of techniques for limiting the spread of errors. Here we implement one of the smallest quantum codes in a five-qubit superconducting transmon device and demonstrate fault-tolerant state preparation. We characterize the resulting codewords through quantum process tomography and study the free evolution of the logical observables. Our results are consistent with fault-tolerant state preparation in a protected qubit subspace.

quant-ph↗

arXiv2017

Demonstration of weight-four parity measurements in the surface code architecture

We present parity measurements on a five-qubit lattice with connectivity amenable to the surface code quantum error correction architecture. Using all-microwave controls of superconducting qubits coupled via resonators, we encode the parities of four data qubit states in either the $X$- or the $Z$-basis. Given the connectivity of the lattice, we perform full characterization of the static $Z$-interactions within the set of five qubits, as well as dynamical $Z$-interactions brought along by single- and two-qubit microwave drives. The parity measurements are significantly improved by modifying the microwave two-qubit gates to dynamically remove non-ideal $Z$ errors.

quant-ph↗

arXiv2014

Isolating electrons on superfluid helium

Electrons floating on the surface of superfluid helium have been suggested as promising mobile spin quantum bits (qubits). Transferring electrons extremely efficiently in a narrow channel structure with underlying gates has been demonstrated, showing no transfer error while clocking $10^9$ pixels in a 3-phase charge coupled device (CCD). While on average, one electron per channel was clocked, it is desirable to reliably obtain a single electron per channel. We have designed an electron turnstile consisting of a narrow (0.8$μ$m) channel and narrow underlying gates (0.5$μ$m) operating across seventy-eight parallel channels. Initially, we find that more than one electron can be held above the small gates. Underlying gates in the turnstile region allow us to repeatedly split these electron packets. Results show a plateau in the electron signal as a function of the applied gate voltages, indicating quantization of the number of electrons per pixel, simultaneously across the seventy-eight parallel channels.

cond-mat.mes-hall↗

arXiv2011

Spatial distribution of electrons on a superfluid helium charge-coupled device

Electrons floating on the surface of superfluid helium have been suggested as promising mobile spin qubits. Three micron wide channels fabricated with standard silicon processing are filled with superfluid helium by capillary action. Photoemitted electrons are held by voltages applied to underlying gates. The gates are connected as a 3-phase charge-coupled device (CCD). Starting with approximately one electron per channel, no detectable transfer errors occur while clocking $10^9$ pixels. One channel with its associated gates is perpendicular to the other 120, providing a CCD which can transfer electrons between the others. This perpendicular channel has not only shown efficient electron transport but also serves as a way to measure the uniformity of the electron occupancy in the 120 parallel channels.

cond-mat.mes-hall↗