Searcharxiv⌕ Search

arXiv subjects

Maitraya Avadhut Desai

Publications and source records attributed to Maitraya Avadhut Desai.

7 recordsLinked to original sources

Loadability Limits Under Periodic Load Forcing

The static loadability limit, defined as the demand at which the equilibrium equations lose their solution, is the standard basis for interconnection screening of large new loads. This letter shows that when part of the demand varies periodically, as for data-center loads, the steady state is a forced periodic orbit whose loadability limit differs from the static one. The classical optimization argument is extended directly from equilibria to fixed points of the period map. At the limit, the monodromy matrix acquires a Floquet multiplier at +1, so the generic instability is a cyclic fold of the orbit rather than a saddle-node of equilibria. The limit is therefore a function of the forcing frequency, which no static computation can capture. Additionally, with the network Jacobian turning singular along the cycle, singularity-induced instability is extended to orbits. On a four-bus test system, a static margin of 2.5 p.u. shrinks to 0.53 p.u. near the swing frequency, the instability mechanism switches from voltage collapse to a rotor-angle fold, and cold starts fail at amplitudes where the orbit still exists. A static analysis reproduces none of these effects.

eess.SY↗

Generalized Vector Locus Transformation for Unbalanced Three-Phase Systems

Coordinate transformations significantly simplify power systems computations. Most notably, the classical Clarke and $dq0$ transformations are widely used in three-phase systems, as together they transform balanced $abc$ quantities into constant-valued signals. However, during unbalanced operation, the utility of these transformations diminishes, since a null $0$-coordinate cannot be ensured and oscillating signals emerge. While recently proposed transformations ensure a null $0$-coordinate, they either do not lead to constant-valued signals in the $dq0$ domain or fail under various unbalanced scenarios. In this paper, we propose a Generalized Vector Locus (GVL) transformation that ensures both a null $0$-coordinate and constant-valued signals. Moreover, we show that, in the balanced case, the classical amplitude-invariant Clarke transformation is an instance of the proposed GVL transformation.

eess.SY↗

Dynamic Optimization of Virtual Inertia and Damping in Converter-Based Power Systems

The transition towards a sustainable power system is enabled by the replacement of conventional synchronous generators with converter-interfaced renewable energy sources. However, the resulting loss of rotational inertia and governor damping causes significant frequency deviations and can therefore cause instability. The focus of this paper is the optimal allocation of virtual inertia and damping in the power system activated by established converter control schemes. To this end, we propose a novel dynamic optimization algorithm that considers performance metrics for system stability, cost-efficiency, and resilience. In addition, our algorithm considers the magnitudes and locations of disturbances in the power system for the optimal allocation. Finally, we validate our approach on a three-area system and also compare our results with a $\mathcal{H}_2$ system-norm-based allocation approach.

eess.SY↗

Effect of Dispatch Decisions on Small-Signal Stability of Converter-Dominated Power Systems

Small-signal stability of modern converter-dominated power systems has been the subject of extensive research, particularly from the perspective of device-level control design for grid-forming (GFM) and grid-following (GFL) converters. However, the influence of power flow variables on system stability has received limited attention. Conventional small-signal stability analyses are typically conducted at a specific operating point, emphasizing the selection of control or system design parameters while neglecting the sensitivity of stability characteristics to operating conditions. This paper seeks to bridge this gap by systematically investigating the impact of dispatch decisions on the small-signal stability of converter-based power systems. Our findings are first illustrated on a three-bus system and then validated on the standard IEEE 39-bus test system to demonstrate scalability. Across the test systems, we find that high-voltage capacitive operation of GFL converters limits its active power injection, whereas inductive operation permits higher injections, and it is generally preferable for the GFM converter to supply more active power.

eess.SY↗

Network-Independent Incremental Passivity Conditions for Grid-Forming Inverter Control

Grid-forming inverters control the power transfer between the AC and DC sides of an electrical grid while maintaining the frequency and voltage of the AC side. This paper focuses on ensuring large-signal stability of an electrical grid with inverter-interfaced renewable sources. We prove that the Hybrid-Angle Control (HAC) scheme for grid-forming inverters can exhibit incremental passivity properties between current and voltage at both the AC and DC ports. This incremental passivity can be certified through decentralized conditions. Inverters operating under HAC can, therefore, be connected to other passive elements (e.g. transmission lines) with an immediate guarantee of global transient stability regardless of the network topology or parameters. Passivity of Hybrid Angle Control is also preserved under small-signal (linearized) analyses, in contrast to conventional proportional droop laws that are passivity-short at low frequencies. Passivity and interconnected-stability properties are demonstrated through an example case study.

eess.SY↗

Cross-Forming Control and Fault Current Limiting for Grid-Forming Inverters

This article proposes a "cross-forming" control concept for grid-forming inverters operating against grid faults. Cross-forming refers to voltage angle forming and current magnitude forming. It differs from classical grid-forming and grid-following paradigms that feature voltage magnitude-and-angle forming and voltage magnitude-and-angle following (or current magnitude-and-angle forming), respectively. The cross-forming concept addresses the need for inverters to remain grid-forming (particularly voltage angle forming, as required by grid codes) while managing fault current limitation. Simple and feasible cross-forming control implementations are proposed, enabling inverters to quickly limit fault currents to a prescribed level while preserving voltage angle forming for grid-forming synchronization and providing dynamic ancillary services, during symmetrical or asymmetrical fault ride-through. Moreover, the cross-forming control yields an equivalent system featuring a constant virtual impedance and a "normal form" representation, allowing for the extension of previously established transient stability results to include scenarios involving current saturation. Simulations and experiments validate the efficacy of the proposed cross-forming control implementations.

eess.SY↗

Saturation-Informed Current-Limiting Control for Grid-Forming Converters

In this paper, we investigate the transient stability of a state-of-the-art grid-forming complex-droop control (i.e., dispatchable virtual oscillator control, dVOC) under current saturation. We quantify the saturation level of a converter by introducing the concept of degree of saturation (DoS), and we propose a provably stable current-limiting control with saturation-informed feedback, which feeds the degree of saturation back to the inner voltage-control loop and the outer grid-forming loop. As a result, although the output current is saturated, the voltage phase angle can still be generated from an internal virtual voltage-source node that is governed by an equivalent complex-droop control. We prove that the proposed control achieves transient stability during current saturation under grid faults. We also provide parametric stability conditions for multi-converter systems under grid-connected and islanded scenarios. The stability performance of the current-limiting control is validated with various case studies.

eess.SY↗