arXiv subjects

Majid Safari

Publications and source records attributed to Majid Safari.

At least 19 recordsLinked to original sources

arXiv2026

Doppler Effect in High-Mobility Free Space Optical Links with Multicarrier Intensity Modulation

In this paper, we investigate the impact of Doppler-induced time scaling in intensity-modulation/direct-detection (IM/DD) multicarrier free-space optical links subject to high mobility. Modeling the Doppler effect as a single-sideband frequency shift applied to the analytic signal waveform, we show that it produces a baseband-equivalent phase rotation, resulting in a common-phase error (CPE), in addition to Dirichlet-kernel inter-carrier interference (ICI), even though the optical carrier phase is removed through photo-detection. The numerical results based on DC-biased optical orthogonal frequency-division multiplexing (DCO-OFDM), show that at small Doppler shifts, the CPE component dominates and can be effectively compensated through pilot-aided phase tracking, while the induced ICI remains rather negligible. At larger Doppler shifts, however, ICI becomes dominant and results in a bit-error-rate floor, highlighting the need for both CPE tracking and ICI mitigation. This is particularly relevant for optical links with small subcarrier spacing and large Doppler shifts, such as those in low-Earth-orbit satellite-to-ground and inter-satellite transmission scenarios.

eess.SP↗

arXiv2026

Spatially Adaptive Detection for Satellite-based QKD under Atmospheric Turbulence Channel

Quantum key distribution (QKD) provides information-theoretic security and satellite-based quantum key distribution (SatQKD) has demonstrated the potential to extend this communication security to intercontinental scales. However, atmospheric turbulence induces significant distortion in the spatial distribution of received optical beams, while background noise remains approximately uniform across the detector plane. As a result, single-element qubit (quantum bit) detection can be frequently dominated by noise due to the random spatial pattern of the imaged wavefront, thereby degrading the system performance. To address this limitation, we propose to exploit the spatial degrees of freedom of single-photon detector arrays to reject the excessive noise while adapting to channel variations induced by turbulence. We develop a threshold-based selection method that only activates detector elements that have higher probability of registering qubits. We evaluate the performance of the proposed noise-rejection QKD schemes using Monte Carlo simulations considering the impact of diffraction and atmospheric turbulence on the transmitted optical beam in the presence of background and dark noise. The results show that, compared to conventional schemes, the proposed noise-rejection strategy effectively reduces the quantum bit error rate (QBER) and improves the secret key rate (SKR) performance, while the performance gains depend on the turbulence condition. These findings demonstrate the potential of adaptive array receiver design to enhance the robustness of the SatQKD system under realistic atmospheric conditions.

quant-ph↗

arXiv2025

Dynamic Power Allocation For NOMA-Based Transmission in 6G Optical Wireless Networks

OWC has been considered as a key enabling technology to unlock unprecedented speeds of communication, supporting high demands of data traffic. In this paper, infrared lasers are used as optical transmitters operating in an indoor environment under eye safety regulations due to their high modulation speed. To provide efficient multiple access service, NOMA-based transmission is implemented to multiplex messages intended to multiple users in the power domain and maximize the spectral efficiency of our laser-based OWC network. In particular, a BIA outer precoder is designed to coordinate the transmission among multiple APs and determine the precoding matrices for groups of users potential formed according to NOMA principles. For effective use of NOMA, an optimization problem is formulated to maximize the sum rate of the network through forming optimum groups under certain joint conditions, efficient power allocation, high quality of service for each weak and strong users, and high overall system performance. Such optimization problems are defined as max-min fractional programs difficult to solve in practice. Therefore, a dynamic application for NOMA is introduced using two algorithms. First, a RF-aided dynamic algorithm is designed to form multiple groups, where users exchange binary variables among them through an RF system to establish distance-based weight edges, which are used as a metric for the grouping process. Second, a dynamic power allocation is proposed to determine the optimum power allocated to each group, while the users belonging to a certain group receive their traffic demands regardless of their classification as weak or strong. The results show the convergence of the proposed dynamic application to the optimum solution, and its high performance in terms of sum rate, fairness, and energy efficiency compared to counterpart schemes.

eess.SY↗

arXiv2025

BIA Transmission in Rate Splitting-based Optical Wireless Networks

Optical wireless communication (OWC) has recently received massive interest as a new technology that can support the enormous data traffic increasing on daily basis. In particular, laser-based OWC networks can provide terabits per second (Tbps) aggregate data rates. However, the emerging OWC networks require a high number of optical access points (APs), each AP corresponding to an optical cell, to provide uniform coverage for multiple users. Therefore, inter-cell interference (ICI) and multi-user interference (MUI) are crucial issues that must be managed efficiently to provide high spectral efficiency. In radio frequency (RF) networks, rate splitting (RS) is proposed as a transmission scheme to serve multiple users simultaneously following a certain strategy. It was shown that RS provides high data rates compared to orthogonal and non-orthogonal interference management schemes. Considering the high density of OWC networks, the application of RS within each optical cell might not be practical due to severe ICI. In this paper, a new strategy is derived referred to as blind interference alignment-rate splitting (BIA-RS) to fully coordinate the transmission among the optical APs, while determining the precoding matrices of multiple groups of users formed beforehand. Therefore, RS can be implemented within each group to manage MUI. The proposed BIA-RS scheme requires two layers of power allocation to achieve high performance. Given that, a max-min fractional optimization problem is formulated to optimally distribute the power budget among the groups and the messages intended to the users of each group. Finally, a power allocation algorithm is designed with multiple Lagrangian multipliers to provide practical and sub-optimal solutions. The results show the high performance of the proposed scheme compared to other counterpart schemes.

eess.SY↗

arXiv2025

A Novel Terabit Grid-of-Beam Optical Wireless Multi-User Access Network with Beam Clustering

In this paper, we put forward a proof of concept for sixth generation (6G) Terabit infrared (IR) laser-based indoor optical wireless networks. We propose a novel double-tier access point (AP) architecture based on an array of arrays of vertical cavity surface emitting lasers (VCSELs) to provide a seamless grid-of-beam coverage with multi-Gb/s per beam. We present systematic design and thorough analytical modeling of the AP architecture, which are then applied to downlink system modeling using non-imaging angle diversity receivers (ADRs). We propose static beam clustering with coordinated multi-beam joint transmission (CoMB-JT) for network interference management and devise various clustering strategies to address inter-beam interference (IBI) and inter-cluster interference (ICI). Non-orthogonal multiple access (NOMA) and orthogonal frequency division multiple access (OFDMA) schemes are also adopted to handle intra-cluster interference, and the resulting signal-to-interference-plus-noise ratio (SINR) and achievable data rate are derived. The network performance is studied in terms of spatial distributions and statistics of the downlink SINR and data rate through extensive computer simulations. The results demonstrate that data rates up to 15 Gb/s are achieved within the coverage area and a properly devised clustering strikes a balance between the sum rate and fairness depending on the number of users.

eess.SP↗

arXiv2025

A Comprehensive Comparison between Terahertz and Optical Wireless Communications

This paper presents a comprehensive quantitative comparison between Terahertz (THz) communication (TeraCom) and optical wireless communication (OWC) technologies, focusing on both indoor and outdoor environments. We propose a comparison method for TeraCom and vertical-cavity surface-emitting laser (VCSEL)-based OWC in indoor scenarios, incorporating misalignment effects by modeling the THz antenna radiation pattern within a multi-ray THz channel model and using a Gaussian beam model for VCSEL-based OWC. Unified beamwidth parameters allow for a detailed analysis of misalignment impact on both systems. Furthermore, we develop power consumption models for each technology, integrating key parameters such as THz phase noise, VCSEL non-linearities, and photodetector bandwidth-area tradeoffs. These models enable an in-depth analysis of energy efficiency in indoor environments, including multi-transmitter coverage scenarios. For outdoor scenarios, we summarize existing stochastic channel models addressing path loss, pointing errors, and small-scale fading for free space optics (FSO) and THz links. We then apply these models to unmanned aerial vehicle (UAV) applications to assess performance in dynamic conditions. Our results provide critical insights into the suitability of each technology for various deployment scenarios.

eess.SP↗

arXiv2024

Interference Mitigation using Optimized Angle Diversity Receiver in LiFi Cellular Network

Light-fidelity (LiFi) is an emerging technology for high-speed short-range mobile communications. Inter-cell interference (ICI) is an important issue that limits the system performance in an optical attocell network. Angle diversity receivers (ADRs) have been proposed to mitigate ICI. In this paper, the structure of pyramid receivers (PRs) and truncated pyramid receivers (TPRs) are studied. The coverage problems of PRs and TPRs are defined and investigated, and the lower bound of field of view (FOV) for each PD is given analytically. The impact of random device orientation and diffuse link signal propagation are taken into consideration. The performances of PRs and TPRs are compared and then optimized ADR structures are proposed. The performance comparison between the select best combining (SBC) and maximum ratio combining (MRC) is given under different noise levels. It is shown that SBC will outperform MRC in an interference limited system, otherwise, MRC is a preferred scheme. In addition, the double source system, where each LiFi AP consists of two sources transmitting the same information signals but with opposite polarity, is proved to outperform the single source (SS) system under certain conditions.

cs.IT↗

arXiv2024

Spatial Mode Multiplexing for Fiber-Coupled IM/DD Optical Wireless Links with Misalignment

Optical wireless communication (OWC) emerges as a pivotal solution for achieving terabit-level aggregate throughput in next-generation wireless networks. With the mature high-speed transceivers and advanced (de)multiplexing techniques designed for fiber optics, fiber-coupled OWC can be seamlessly integrated into existing ultra-high-speed networks such as data centres. In particular, OWC leveraging spatial mode multiplexing (SMM) and few-mode fiber (FMF) coupling can significantly increase capacity, though misalignment may reduce performance. This paper presents a thorough investigation into the SMM-enabled FMF coupling OWC systems affected by link misalignment, specifically focusing on systems with intensity modulation with direct detection (IM/DD) receivers. A theoretical analysis is conducted to assess the fiber coupling efficiency of the considered system in the presence of both pointing error and angle of arrival (AOA) fluctuations caused by random device vibrations. Our model elucidates the dependence of coupling efficiency to the order of the incident modes, highlighting the critical role of beam properties in system performance. To mitigate the intermodal crosstalk arising from link misalignment, we employ zero-forcing beamforming (ZFBF) to enhance the overall aggregated data rate. Through extensive numerical results, we identify optimal system configurations encompassing aperture design and mode selection, leading to a capacity boost exceeding 200%.

eess.SY↗

arXiv2023

Feasibility Conditions for Mobile LiFi

Light fidelity (LiFi) is a potential key technology for future 6G networks. However, its feasibility of supporting mobile communications has not been fundamentally discussed. In this paper, we investigate the time-varying channel characteristics of mobile LiFi based on measured mobile phone rotation and movement data. Specifically, we define LiFi channel coherence time to evaluate the correlation of the channel timing sequence. Then, we derive the expression of LiFi transmission rate based on the m-pulse-amplitude-modulation (M-PAM). The derived rate expression indicates that mobile LiFi communications is feasible by using at least two photodiodes (PDs) with different orientations. Further, we propose two channel estimation schemes, and propose a LiFi channel tracking scheme to improve the communication performance. Finally, our experimental results show that the channel coherence time is on the order of tens of milliseconds, which indicates a relatively stable channel. In addition, based on the measured data, better communication performance can be realized in the multiple-input multiple-output (MIMO) scenario with a rate of 36Mbit/s, compared to other scenarios. The results also show that the proposed channel estimation and tracking schemes are effective in designing mobile LiFi systems.

eess.SY↗

arXiv2023

Single-Photon Counting Receivers for Optical Wireless Communications in Future 6G Networks

Optical wireless communication (OWC) offers several complementary advantages to radio-frequency wireless networks such as its massive available spectrum; hence, it is widely anticipated that OWC will assume a pivotal role in the forthcoming sixth generation wireless communication networks. Although significant progress has been achieved in OWC over the past decades, the outage induced by occasionally low received optical power continues to pose a key limiting factor for its deployment. In this work, we discuss the potential role of single-photon counting (SPC) receivers as a promising solution to overcome this limitation. We present an overview of the applications of SPC-based OWC systems in 6G networks, introduce their major performance-limiting factors, propose a performance enhancement framework to tackle these issues, and identify critical areas of open problems for future research.

cs.IT↗

arXiv2022

Design and Optimisation of High-Speed Receivers for 6G Optical Wireless Networks

To achieve multi-Gb/s data rates in 6G optical wireless access networks based on narrow infrared (IR) laser beams, a high-speed receiver with two key specifications is needed: a sufficiently large aperture to collect the required optical power and a wide field of view (FOV) to avoid strict alignment issues. This paper puts forward the systematic design and optimisation of multi-tier non-imaging angle diversity receivers (ADRs) composed of compound parabolic concentrators (CPCs) coupled with photodiode (PD) arrays for laser-based optical wireless communication (OWC) links. Design tradeoffs include the gain-FOV tradeoff for each receiver element and the area-bandwidth tradeoff for each PD array. The rate maximisation is formulated as a non-convex optimisation problem under the constraints on the minimum required FOV and the overall ADR dimensions to find optimum configuration of the receiver bandwidth and FOV, and a low-complexity optimal solution is proposed. The ADR performance is studied using computer simulations and insightful design guidelines are provided through various numerical examples. An efficient technique is also proposed to reduce the ADR dimensions based on CPC length truncation. It is shown that a compact ADR with a height of $\leq0.5$ cm and an effective area of $\leq0.5$ cm$^2$ reaches a data rate of $12$ Gb/s with a half-angle FOV of $30^\circ$ over a $3$ m link distance.

cs.IT↗

arXiv2022

SPAD-Based Optical Wireless Communication with ACO-OFDM

The sensitivity of the optical wireless communication (OWC) can be effectively improved by employing the highly sensitive single-photon avalanche diode (SPAD) arrays. However, the nonlinear distortion introduced by the dead time strongly limits the throughput of the SPAD-based OWC systems. Optical orthogonal frequency division multiplexing (OFDM) can be employed in the systems with SPAD arrays to improve the spectral efficiency. In this work, a theoretical performance analysis of SPAD-based OWC system with asymmetrically-clipped optical OFDM (ACO-OFDM) is presented. The impact of the SPAD nonlinearity on the system performance is investigated. In addition, the comparison of the considered scheme with direct-current-biased optical OFDM (DCO-OFDM) is presented showing the distinct reliable operation regimes of the two schemes. In the low power regimes, ACO-OFDM outperforms DCO-OFDM; whereas, the latter is more preferable in the high power regimes.

cs.IT↗

arXiv2022

Spatial and Wavelength Division Joint Multiplexing System Design for Visible Light Communications

The low-pass characteristics of front-end elements including light-emitting diodes (LEDs) and photodiodes (PDs) limit the transmission data rate of visible light communication (VLC) and Light Fidelity (LiFi) systems. Using multiplexing transmission techniques, such as spatial multiplexing (SMX) and wavelength division multiplexing (WDM), is a solution to overcome bandwidth limitation. However, spatial correlation in optical wireless channels and optical filter bandpass shifts typically limit the achievable multiplexing gain in SMX and WDM systems, respectively. In this paper, we consider a multiple-input multiple output (MIMO) joint multiplexing VLC system that exploits available degrees-offreedom (DoFs) across space, wavelength and frequency dimensions simultaneously. Instead of providing a new precoder/post-detector design, we investigate the considered joint multiplexing system from a system configuration perspective by tuning system parameters in both spatial and wavelength domains, such as LED positions and optical filter passband. We propose a novel spatial clustering with wavelength division (SCWD) strategy which enhances the MIMO channel condition. We propose to use a state-of-the-art black-box optimization tool: Bayesian adaptive direct search (BADS) to determine the desired system parameters, which can significantly improve the achievable rate. The extensive numerical results demonstrate the superiority of the proposed method over conventional SMX and WDM VLC systems.

eess.SP↗

arXiv2022

Optimal Power Allocation for Integrated Visible Light Positioning and Communication System with a Single LED-Lamp

In this paper, we investigate an integrated visible light positioning and communication (VLPC) system with a single LED-lamp. First, by leveraging the fact that the VLC channel model is a function of the receiver's location, we propose a system model that estimates the channel state information (CSI) based on the positioning information without transmitting pilot sequences. Second, we derive the Cramer-Rao lower bound (CRLB) on the positioning error variance and a lower bound on the achievable rate with on-off keying modulation. Third, based on the derived performance metrics, we optimize the power allocation to minimize the CRLB, while satisfying the rate outage probability constraint. To tackle this non-convex optimization problem, we apply the worst-case distribution of the Conditional Value-at-Risk (CVaR) and the block coordinate descent (BCD) methods to obtain the feasible solutions. Finally, the effects of critical system parameters, such as outage probability, rate threshold, total power threshold, are revealed by numerical results.

cs.IT↗

arXiv2022

Multi-User Rate Splitting in Optical Wireless Networks

Optical wireless communication (OWC) has recently received massive interest as a new technology that can support the enormous data traffic increasing on daily basis. Laser-based OWC networks can provide terabits per second (Tbps) aggregate data rates. However, the emerging OWC networks require clusters of optical transmitters to provide uniform coverage for multiple users. In this context, multi-user interference (MUI) is a crucial issue that must be managed efficiently to provide high spectral efficiency. Rate splitting (RS) is proposed as a transmission scheme to serve multiple users simultaneously by splitting the message of a given user into common and private messages, and then, each user decodes the desired message following a certain procedure. In radio frequency (RF) networks, RS provides higher spectral efficiency compared with orthogonal and non-orthogonal transmission schemes. Considering the high density of OWC networks, the performance of RS is limited by the cost of providing channel state information (CSI) at transmitters and by the noise resulting from interference cancellation. In this work, a user-grouping algorithm is proposed and used to form multiple groups, each group contains users spatially clustered. Then, an outer precoder is designed to manage inter-group interference following the methodology of blind interference alignment (BIA), which reduces the requirements of CSI at RF or optical transmitters. For intra-group interference, RS is applied within each group where the users belonging to a given group receive a unique common message on which their private messages are superimposed. Furthermore, an optimization problem is formulated to allocate the power among the private messages intended to all users such that the sum rate of the network is maximized.

eess.SP↗

arXiv2022

Terabit Indoor Laser-Based Wireless Communications: LiFi 2.0 for 6G

This paper provides a summary of available technologies required for implementing indoor laser-based wireless networks capable of achieving aggregate data-rates of terabits per second as widely accepted as a sixth generation (6G) key performance indicator. The main focus of this paper is on the technologies supporting the near infrared region of the optical spectrum. The main challenges in the design of the transmitter and receiver systems and communication/networking schemes are identified and new insights are provided. This paper also covers the previous and recent standards as well as industrial applications for optical wireless communications (OWC) and LiFi.

cs.IT↗

arXiv2022

Multi-Hop Quantum Key Distribution with Passive Relays over Underwater Turbulence Channels

Absorption, scattering, and turbulence experienced in underwater channels severely limit the range of quantum communications. In this paper, to overcome range limitations, we investigate a multi-hop underwater quantum key distribution (QKD) where intermediate nodes help the key distribution between the source and destination nodes. We consider deployment of passive-relays which simply redirect the qubits to the next relay node or receiver without any measurement. Based on near-field analysis, we present the performance of relay-assisted QKD scheme in clear ocean under different atmospheric conditions. We further investigate the effect of system parameters (aperture size and detector field-of-view) on the achievable distance.

quant-ph↗

arXiv2022

Performance Analysis of SPAD-Based Optical Wireless Communication with OFDM

In recent years, there has been a growing interest in the use of single-photon avalanche diode (SPAD) in optical wireless communication (OWC). SPAD operates in the Geiger mode and can act as a photon counting receiver obviating the need for a transimpedance amplifier (TIA). Although a SPAD receiver can provide higher sensitivity compared to the traditional linear photodetectors, it suffers from the dead-time-induced nonlinearity. To improve the data rates of SPAD-based OWC systems, optical orthogonal frequency division multiplexing (OFDM) can be employed. This paper provides a comprehensive theoretical analysis of the SPAD-based OWC systems using OFDM signalling considering the effects of signal clipping, SPAD nonlinearity, and signal-dependent shot noise. An equivalent additive Gaussian noise channel model is proposed to describe the performance of the SPAD-based OFDM system. The statistics of the proposed channel model and the analytical expressions of the signal-to-noise ratio (SNR) and bit error rate (BER) are derived in closed forms. By means of extensive numerical results, the impact of the unique receiver nonlinearity on the system performance is investigated. The results demonstrate new insights into different optical power regimes of reliable operation for SPAD-based OFDM systems even well beyond SPAD saturation level.

cs.IT↗