Pulse Shaping Increases Efficiency in Pulsed Plasma Accelerators
The performance of a gas-fed pulsed electromagnetic thruster is governed by the ability to deposit electrical energy while propellant is available for acceleration. Current pulsed-power systems require tradeoffs between high-current discharges that produce high exhaust velocities and longer pulses that overlap the energy deposition with more of the gas injection. This limited control restricts the specific impulse and mass utilization of these thrusters. This work introduces programmable pulse shaping as a method to increase control over energy deposition and expand the accessible operating space. We use solid-state integrated power modules to vary the discharge delay, pulse width, peak current, and the shape of the current waveform as propellant is injected. Experiments varying pulse widths from 30 to 500 $\mu$s and peak currents from 3 kA to 16 kA show that short, high-current pulses produce higher exhaust velocities and greater impulse bits than longer, lower-current pulses at comparable discharge energy. The switches also enable multiple discharges of arbitrary positioning and duration during a single gas injection. This micro-burst operation is shown to increase specific impulse in air by 278\% from 840 to 3177 s through improved propellant utilization. This same pulse shaping ability is found to increase thrust efficiency from 0.2\% in single-shot operation to 3.3\% in micro-burst operation while operating with air.