SearcharxivSearch

arXiv subjects

Manav Kohli

Publications and source records attributed to Manav Kohli.

4 recordsLinked to original sources

Channel and Spectrum Consumption Models for Urban Outdoor-to-Outdoor 28 GHz Wireless

Millimeter-wave (mmWave) communication has been widely accepted as an enabler of 6G and other next-generation wireless networks, though high path loss strains link budgets, and difficult channel conditions have limited the deployment of mmWave within the 5G NR radio access network (RAN) primarily to dense urban environments. In this paper, we seek to demystify aspects of RAN planning and design for these environments by providing a set of empirical models of the mmWave channel at 28 GHz, alongside a methodology to develop spectrum consumption models (SCMs), which illustrate constraints on spectrum allocation by the RAN. We report on an extensive 28 GHz measurement campaign within the PAWR COSMOS testbed in New York City. This campaign resulted in over 46 million power measurements, collected from over 3,000 links across 24 street sidewalks at four different sites. Using these measurements, we study the effects of the setup and environments, such as TX height and seasonal effects. We then derive a series of channel models for path loss and the azimuth beamforming gain loss, and use them to derive distributions of the link SNR values achievable by UEs on the measured sidewalks. We show, among other results, that 100% of UEs on a given city block can achieve 10 dB SNR at locations with a strong street canyon effect. Finally, we develop a process to generate SCMs based on the IEEE 1900.5.2 standard using the empirical channel models. The generated SCMs facilitate the evaluation of spectrum sharing and interference management scenarios since they capture all directional propagation effects reflected in the measurements and provide a way to easily share the main propagation characterization results derived from the measurements. We believe that the models, methods, and results in this paper will help inform the future of mmWave wireless network deployments within dense urban areas.

eess.SP

Design and Testbed Deployment of Frequency-Domain Equalization Full Duplex Radios

Full-duplex (FD) wireless can significantly enhance spectrum efficiency but requires effective self-interference (SI) cancellers. RF SI cancellation (SIC) via frequency-domain equalization (FDE), where bandpass filters channelize the SI, is suited for integrated circuits (ICs). In this paper, we explore the limits and higher layer challenges associated with using such cancellers. We evaluate the performance of a custom FDE-based canceller using two testbeds; one with mobile FD radios and the other with upgraded, static FD radios in the PAWR COSMOS testbed. The latter is a lasting artifact for the research community, alongside a dataset containing baseband waveforms captured on the COSMOS FD radios, facilitating FD-related experimentation at the higher networking layers. We evaluate the performance of the FDE-based FD radios in both testbeds, with experiments showing 95 dB overall achieved SIC (52 dB from RF SIC) across 20 MHz bandwidth, and an average link-level FD rate gain of 1.87x. We also conduct experiments in (i) uplink-downlink networks with inter-user interference, and (ii) heterogeneous networks with half-duplex and FD users. The experimental FD gains in the two types of networks depend on the users' SNR values and the number of FD users, and are 1.14x-1.25x and 1.25x-1.73x, respectively, confirming previous analytical results.

cs.NI

Outdoor-to-Indoor 28 GHz Wireless Measurements in Manhattan: Path Loss, Environmental Effects, and 90% Coverage

Outdoor-to-indoor (OtI) signal propagation further challenges the already tight link budgets at millimeter-wave (mmWave). To gain insight into OtI mmWave scenarios at 28 GHz, we conducted an extensive measurement campaign consisting of over 2,200 link measurements. In total, 43 OtI scenarios were measured in West Harlem, New York City, covering seven highly diverse buildings. The measured OtI path gain can vary by up to 40 dB for a given link distance, and the empirical path gain model for all data shows an average of 30 dB excess loss over free space at distances beyond 50 m, with an RMS fitting error of 11.7 dB. The type of glass is found to be the single dominant feature for OtI loss, with 20 dB observed difference between empirical path gain models for scenarios with low-loss and high-loss glass. The presence of scaffolding, tree foliage, or elevated subway tracks, as well as difference in floor height are each found to have an impact between 5-10 dB. We show that for urban buildings with high-loss glass, OtI coverage can support 500 Mbps for 90% of indoor user equipment (UEs) with a base station (BS) antenna placed up to 49 m away. For buildings with low-loss glass, such as our case study covering multiple classrooms of a public school, data rates over 2.5/1.2 Gbps are possible from a BS 68/175 m away from the school building, when a line-of-sight path is available. We expect these results to be useful for the deployment of mmWave networks in dense urban environments as well as the development of relevant scheduling and beam management algorithms.

eess.SP

Directional Measurements in Urban Street Canyons from Macro Rooftop Sites at 28 GHz for 90% Outdoor Coverage

Path gain and effective directional gain in azimuth in urban canyons from actual rooftop base station sites are characterized based on a massive data set of 3000 links on 12 streets in two cities, with over 21 million individual continuous wave power measurements at 28 GHz using vertically polarized antennas. Large street-to-street path gain variation is found, with median street path gain varying over 30 dB at similar distances. Coverage in the street directly illuminated by a roof edge antenna is found to suffer an average excess loss of 11 dB relative to free space at 200 m, with empirical slope-intercept fit model representing the data with 7.1 dB standard deviation. Offsetting the base antenna 5 m away from roof edge, as is common in macro cellular deployments, introduces an additional average loss of 15 dB at 100 m, but this additional loss reduces with distance. Around the corner loss is well modeled by a diffraction formula with an empirically obtained diffraction coefficient. Effective azimuthal gain degradation due to scatter is limited to 2 dB for 90% of data, supporting effective use of high gain antennas in urban street canyons.

eess.SP